SHIVA-SLOT-MIB
23 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1213-MIB | DisplayString |
| SHIVA-MIB | -- Concise MIB Definitions slot |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.37963.1.1.14.1 | TableinternalSlotTable | not-accessible | mandatory | A table of internal slots. |
| 1.3.6.1.4.1.37963.1.1.14.1.1 | RowinternalSlotEntry | not-accessible | mandatory | Internal slot parameters. |
| 1.3.6.1.4.1.37963.1.1.14.1.1.1 | ColumninternalSlotIndex | read-only | mandatory | Slot number for this slot in the server. The range is (1..1) for a NetModem, (1..8) for a LanRover, and (1..11) for a LanRover Access Switch. |
| 1.3.6.1.4.1.37963.1.1.14.1.1.2 | ColumninternalSlotType | read-only | mandatory | Internal slot class. This is the generic type of the device in the slot. |
| 1.3.6.1.4.1.37963.1.1.14.1.1.3 | ColumninternalSlotName | read-only | mandatory | Internal slot name. This is the name of the device in the slot. |
| 1.3.6.1.4.1.37963.1.1.14.1.1.4 | ColumninternalSlotFirmRev | read-only | mandatory | Internal slot firmware revision. |
| 1.3.6.1.4.1.37963.1.1.14.1.1.5 | ColumninternalSlotHWRev | read-only | mandatory | Internal slot hardware/datapump revision. It is the hardware revision for all values of internalSlotType except modem, where it is the datapump version. |
| 1.3.6.1.4.1.37963.1.1.14.1.1.6 | ColumninternalSlotStatus | read-write | mandatory | Internal slot status. Writing the value to init(2) will re-initialize the device. |
| 1.3.6.1.4.1.37963.1.1.14.1.1.7 | ColumninternalSlotNumLines | read-only | mandatory | Number of lines or channels supported on this internal slot. |
| 1.3.6.1.4.1.37963.1.1.14.1.1.8 | ColumninternalSlotSwitch | read-only | mandatory | ISDN switch type on this slot, if internalSlotType is bri-st or bri-u. Otherwise 0. |
| 1.3.6.1.4.1.37963.1.1.14.1.1.9 | ColumninternalSlotDchanStat | read-only | mandatory | ISDN D channel status, if internalSlotType is bri-st or bri-u. Otherwise 0. |
| 1.3.6.1.4.1.37963.1.1.14.1.1.10 | ColumninternalSlotCardType | read-only | mandatory | The specific type of card in this slot. Note that for the pri-isa cards that 'pri' refers to the manufacturer (Primary Rate Inc., now part of Xircom). Similarl… |
| 1.3.6.1.4.1.37963.1.1.14.1.1.11 | ColumninternalSlotBusType | read-only | mandatory | Type of bus connector(s) available in this internal slot. |
| 1.3.6.1.4.1.37963.1.1.14.1.1.12 | ColumninternalSlotCardBusType | read-only | mandatory | The type of bus connector on the card in this internal slot. |
| 1.3.6.1.4.1.37963.1.1.14.2 | TableslotLineTable | not-accessible | mandatory | A table of internal slots and lines, allowing cross-referencing between physical (slot/line) and logical (ifIndex) addressing. |
| 1.3.6.1.4.1.37963.1.1.14.2.1 | RowslotLineEntry | not-accessible | mandatory | Internal slot and line data. |
| 1.3.6.1.4.1.37963.1.1.14.2.1.1 | ColumnslSlot | read-only | mandatory | The slot number of the slot that this line or unit is in. |
| 1.3.6.1.4.1.37963.1.1.14.2.1.2 | ColumnslLine | read-only | mandatory | The line (or unit) within a slot that this line (or unit) is. |
| 1.3.6.1.4.1.37963.1.1.14.2.1.3 | ColumnslType | read-only | mandatory | Type of entity in this slot/line or slot/unit. |
| 1.3.6.1.4.1.37963.1.1.14.2.1.4 | ColumnslIfIndex | read-only | mandatory | The ifIndex of the entry in the ifTable in the RFC1213-MIB (MIB-II) that represents this entity. |
| 1.3.6.1.4.1.37963.1.1.14.2.1.5 | ColumnslAdminType | read-only | mandatory | This bitmap describes the administrative capabilities of each line, and is the sum of the capabilities. Set any bits that are appropriate. |
| 1.3.6.1.4.1.37963.1.1.14.2.1.6 | ColumnslAdminStatus | read-write | mandatory | The desired state of the interface. The testing(3) state indicates that no operational packets can be passed. When a managed system initializes, all interfaces… |
| 1.3.6.1.4.1.37963.1.1.14.2.1.7 | ColumnslOperStatus | read-only | mandatory | The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. If slAdminStatus is down(2) then slOp… |