SIAE-EQUIP-MIB
56 objects
Common parameters of SIAE equipments.
Imported Objects
| IF-MIB | InterfaceIndex |
| SIAE-ALARM-MIB | AlarmSeverityCode AlarmStatus alarmTrap |
| SIAE-EQUIPTYPE-MIB | equipTypeUnknown |
| SIAE-TREE-MIB | siaeMib |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks |
| SNMPv2-TC | AutonomousType DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3373.1103.0.109 | NotificationequipLOMConnectedMonitor | current | This event is generated by ALFOHD-NE when equipLOMConnected is set to Monitor mode. The data passed with the event are: 1) equipIpSnmpAgentAddress 2) equipLOMC… | |
| 1.3.6.1.4.1.3373.1103.0.110 | NotificationequipLOMConnectedConfig | current | This event is generated by ALFOHD-NE when equipLOMConnected is set to Configuration mode. The data passed with the event are: 1) equipIpSnmpAgentAddress 2) equ… | |
| 1.3.6.1.4.1.3373.1103.0.111 | NotificationequipLOMDisconnected | current | This event is generated by ALFOHD-NE when LOMConnected is cleared. The data passed with the event are: 1) equipIpSnmpAgentAddress 2) equipLOMConnected | |
| 1.3.6.1.4.1.3373.1103.0.114 | NotificationequipConfigChangeStatus | current | This event is generated by ALFOHD-NE when equipConfigChange is changed. The data passed with the event are: 1) equipIpSnmpAgentAddress 2) equipConfigChange | |
| 1.3.6.1.4.1.3373.1103.0.123 | NotificationequipManagerWakeUpNotify | current | This trap is sent periodically only to the manager specified by the leaf equipManagerWakeUpIpAddr when equipManagerWakeUpAlarmSeverityCode differs from disable… | |
| 1.3.6.1.4.1.3373.1103.1 | Identityequipment | Common parameters of SIAE equipments. | ||
| 1.3.6.1.4.1.3373.1103.1.1 | ScalarequipMibVersion | read-only | current | Numerical version of this module. The string version of this MIB have the following format: XX.YY.ZZ so, for example, the value 1 should be interpreted as 00.0… |
| 1.3.6.1.4.1.3373.1103.1.2 | ScalarequipCurrentTime | read-write | current | Seconds since 1/1/1970. |
| 1.3.6.1.4.1.3373.1103.1.3 | ScalarequipUpTime | read-only | current | The time since the system was last re-initialized (in seconds since 1/1/1970). |
| 1.3.6.1.4.1.3373.1103.1.4 | ScalarequipType | read-only | current | Type of SIAE MICROELETTRONICA's equipment |
| 1.3.6.1.4.1.3373.1103.1.6 | ScalarequipIpEthOsiAddress | read-write | current | Ip address of the equipment on Ethernet-OSI interface. |
| 1.3.6.1.4.1.3373.1103.1.7 | ScalarequipGosipAddress | read-write | current | GOSIP address of the equipment. |
| 1.3.6.1.4.1.3373.1103.1.8 | ScalarequipIpEthOsiNetMask | read-write | current | The subnet Mask associated with the IP address of OSI ethernet interface. The value of the Mask is an IP address with all the network bits set to 1 and all the… |
| 1.3.6.1.4.1.3373.1103.1.9 | ScalarequipL1L2IsIsRouting | read-write | current | It defines the IS-IS routing type: L1 within the same area, L2 among different areas. |
| 1.3.6.1.4.1.3373.1103.1.10 | ScalarequipStationID | read-write | current | ASCII string assigned by the operator to identify the specific equipment. |
| 1.3.6.1.4.1.3373.1103.1.11 | ScalarequipLOMConfigEnable | read-write | current | Enables/disables the capabilityto connect a LOM in Configuration Mode. |
| 1.3.6.1.4.1.3373.1103.1.12 | ScalarequipLOMConnected | read-only | current | Signal when the LOM is connected to the NE and if the connection is for monitor or configuration. |
| 1.3.6.1.4.1.3373.1103.1.13 | ScalarequipLOMConnectedTrapEnable | read-write | current | Enables/disables the trap generation on EquipLOMConnected status change event. |
| 1.3.6.1.4.1.3373.1103.1.14 | ScalarequipConfigChange | read-write | current | Set by the NE when the equipment configuration is changed by the local or Remote LOM. The octet string is a bit stream of flags; a set bit is a change on a spe… |
| 1.3.6.1.4.1.3373.1103.1.15 | ScalarequipConfigChangeTrapEnable | read-write | current | Enables/disables the trap generation on EquipConfigChange status change event. |
| 1.3.6.1.4.1.3373.1103.1.16 | ScalarequipRequest | read-write | current | Force Equipment Controller restart or change in interface properties. |
| 1.3.6.1.4.1.3373.1103.1.17 | ScalarequipIpEthAddress | read-write | current | Ip address of the equipment on Ethernet interface. |
| 1.3.6.1.4.1.3373.1103.1.18 | ScalarequipIpEthNetMask | read-write | current | The subnet Mask associated with the IP address of ethernet interface. The value of the Mask is an IP address with all the network bits set to 1 and all the hos… |
| 1.3.6.1.4.1.3373.1103.1.19 | ScalarequipOsiamParameter | read-write | current | It defines the set-up parameter for OSI stack. |
| 1.3.6.1.4.1.3373.1103.1.20 | ScalarequipIpSnmpAgentAddress | read-write | current | Ip address used by SNMP Agent for mark generated TRAP. |
| 1.3.6.1.4.1.3373.1103.1.21 | ScalarequipOperationInProgress | read-write | current | A value different from 0 means operation in progress. |
| 1.3.6.1.4.1.3373.1103.1.22 | ScalarequipManagerWakeUpAlarm | read-only | current | This alarm switches on when periodic connection wake-up trap starts. The trap related to this alarm is also sent periodically only to the manager specified by … |
| 1.3.6.1.4.1.3373.1103.1.23 | ScalarequipManagerWakeUpAlarmSeverityCode | read-write | current | Defines the severity associated to the equipManagerWakeUpAlarm and enables/disables the trap generation on status change event. |
| 1.3.6.1.4.1.3373.1103.1.24 | ScalarequipManagerWakeUpTimeout | read-write | current | This object defines the time (in minutes) after which the periodic connection wake-up trap is stopped. The maximium value is equivalent to 24 hours. When the t… |
| 1.3.6.1.4.1.3373.1103.1.25 | ScalarequipManagerWakeUpIpAddr | read-write | current | Ip Address of manager wich to send a periodic connection wake-up trap. The periodic trap is sent only if the equipManagerWakeUpAlarmSeverityCode differs from d… |
| 1.3.6.1.4.1.3373.1103.1.26 | ScalarequipManagerWakeUpGosipAddress | read-write | current | Gosip Address of manager wich to send a periodic connection wake-up trap. |
| 1.3.6.1.4.1.3373.1103.1.27 | ScalarequipManagerWakeUpTrapVersion | read-write | current | Trap version supported by Manager to wake-up. |
| 1.3.6.1.4.1.3373.1103.1.28 | ScalarequipManager1IpAddr | read-write | current | First IP address of a SNMP Manager always logged to this equipment. The address 0.0.0.0 mean that manager is not present. |
| 1.3.6.1.4.1.3373.1103.1.29 | ScalarequipManager2IpAddr | read-write | current | Second IP address of a SNMP Manager always logged to this equipment. The address 0.0.0.0 mean that manager is not present. |
| 1.3.6.1.4.1.3373.1103.1.30 | ScalarequipManager1TrapVersion | read-write | current | Trap version supported by Manager 1 (related to equipManager1IpAddr). |
| 1.3.6.1.4.1.3373.1103.1.31 | ScalarequipManager2TrapVersion | read-write | current | Trap version supported by Manager 2 (related to equipManager2IpAddr). |
| 1.3.6.1.4.1.3373.1103.1.32 | ScalarequipDailyPmTimeZone | read-write | current | Reference GMT Time Zone to close the daily P.M. records. |
| 1.3.6.1.4.1.3373.1103.1.33 | ScalarequipOperationMngtControl | read-write | current | startOperation means the apply of the 'management parameters set' on the E6165 switch. confirmOperation means the backup of the 'management parameters set'. |
| 1.3.6.1.4.1.3373.1103.1.34 | ScalarequipOperationMngtInProgress | read-only | current | A value different from 0 means Mngt operation in progress. |
| 1.3.6.1.4.1.3373.1103.1.35 | ScalarequipLocation | read-write | current | ASCII string assigned by the operator to identify the location of specific equipment. |
| 1.3.6.1.4.1.3373.1103.1.36 | ScalarequipLongitude | read-write | current | Geographic coordinate that specifies the east-west position of the equipment. In order to calculate the latitude in degrees the formula to be applied is Longit… |
| 1.3.6.1.4.1.3373.1103.1.37 | ScalarequipLatitude | read-write | current | Geographic coordinate that specifies the north-south position of the equipment. In order to calculate the latitude in degrees the formula to be applied is Lati… |
| 1.3.6.1.4.1.3373.1103.1.38 | ScalarequipIpEthVlanId | read-write | current | Ethernet vlan id on top of which management is built |
| 1.3.6.1.4.1.3373.1103.1.39 | ScalarequipIpEthDefGateway | read-write | current | Ip address of the default gateway on Ethernet interface. |
| 1.3.6.1.4.1.3373.1103.1.40 | ScalarequipIpEthDefGatewayIfIndex | read-write | current | Ip address of the default gateway on Ethernet interface. |
| 1.3.6.1.4.1.3373.1103.1.41 | TableequipMngtTable | not-accessible | current | This is the table that describes the DCN parameters. Two records are created, the first one represents the operational status, the other one represents the adm… |
| 1.3.6.1.4.1.3373.1103.1.41.1 | RowequipMngtTableEntry | not-accessible | current | The DCN parameters. |
| 1.3.6.1.4.1.3373.1103.1.41.1.1 | ColumnequipMngtStatus | read-only | current | The index to select one of two records of table: the operational record and the administrative record. |
| 1.3.6.1.4.1.3373.1103.1.41.1.2 | ColumnequipMngtIpAddress | read-write | current | The IP address of the equipment. |
| 1.3.6.1.4.1.3373.1103.1.41.1.3 | ColumnequipMngtIpNetMask | read-write | current | The network mask associated with the IP address. |
| 1.3.6.1.4.1.3373.1103.1.41.1.4 | ColumnequipMngtIpDefGateway | read-write | current | The IP address of the default gateway. |
| 1.3.6.1.4.1.3373.1103.1.41.1.5 | ColumnequipMngtIpDefGatewayIfIndex | read-write | current | The interface selected to reach the default gateway. The special value 1 means that the snmp agent selects the interface whose IP address belongs to the defaul… |
| 1.3.6.1.4.1.3373.1103.1.41.1.6 | ColumnequipMngtIfType | read-write | current | The type of management interface: - value 1 for physical lan interface, - value 2 for virtual loopback interface, - value 3 for management over vlan interface.… |
| 1.3.6.1.4.1.3373.1103.1.41.1.7 | ColumnequipMngtIfId | read-write | current | The identifier of management interface: - if equipMngtIfType is ethernet: equipMngtIfId is the ifIndex of interface; - if equipMngtIfType is loopback: equipMng… |
| 1.3.6.1.4.1.3373.1103.1.41.1.8 | ColumnequipMngtIfPortVlanId | read-write | current | The ifIndex corresponding to the port registered to vlan ID; it is valid only when equipMngtIfType is vlan, whose value is in equipMngtIfId. This object can be… |
| 1.3.6.1.4.1.3373.1103.1.42 | ScalarequipLastRestartType | read-only | current | Report the last restart-type performed in the system. |