SIEMENS-DUPLEXWRITE-MIB
76 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.231 | Nodesni | |||
| 1.3.6.1.4.1.231.2 | NodesniProductMibs | |||
| 1.3.6.1.4.1.231.2.10 | NodesniExtensions | |||
| 1.3.6.1.4.1.231.2.10.2 | NodesniServerMgmt | |||
| 1.3.6.1.4.1.231.2.10.2.2 | NodesniCommon | |||
| 1.3.6.1.4.1.231.2.10.2.2.8 | NodesieDuplexWrite | |||
| 1.3.6.1.4.1.231.2.10.2.2.8.1 | NodesieDWAgentInfo | |||
| 1.3.6.1.4.1.231.2.10.2.2.8.1.1 | ScalarsieDWAgentId | read-only | mandatory | DuplexWrite SNMP agent ID string |
| 1.3.6.1.4.1.231.2.10.2.2.8.1.2 | ScalarsieDWAgentCompany | read-only | mandatory | DuplexWrite SNMP agent company string |
| 1.3.6.1.4.1.231.2.10.2.2.8.1.3 | ScalarsieDWAgentVersion | read-only | mandatory | DuplexWrite SNMP agent version string |
| 1.3.6.1.4.1.231.2.10.2.2.8.1.4 | ScalarsieDWAgentBuild | read-only | mandatory | DuplexWrite SNMP agent build date and time string |
| 1.3.6.1.4.1.231.2.10.2.2.8.2 | NodesieDWStatus | |||
| 1.3.6.1.4.1.231.2.10.2.2.8.2.1 | ScalarsieDWLastDate | read-only | mandatory | Date of last recent reconfiguration in time_t (seconds since 1/1/1970 00:00:00) |
| 1.3.6.1.4.1.231.2.10.2.2.8.2.2 | ScalarsieDWCurrentStatus | read-only | mandatory | This reflects the overall status of the driver, agent and the underlying ports. Possible values are: OK everything is fine DEGRADED there was an event from the… |
| 1.3.6.1.4.1.231.2.10.2.2.8.2.3 | ScalarsieDWRefresh | read-write | mandatory | Command to refresh the data the agent is maintaining |
| 1.3.6.1.4.1.231.2.10.2.2.8.2.4 | ScalarsieDWClusterPartner | read-only | mandatory | If node is in a cluster this is the partner node |
| 1.3.6.1.4.1.231.2.10.2.2.8.3 | NodesieDWContainer | |||
| 1.3.6.1.4.1.231.2.10.2.2.8.3.1 | TablesieDWDeviceTable | not-accessible | mandatory | Table of all devices DuplexWrite can detect |
| 1.3.6.1.4.1.231.2.10.2.2.8.3.1.1 | RowsieDWDevice | not-accessible | mandatory | Entry in table of DuplexWrite devices |
| 1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.1 | ColumnsieDWDeviceID | read-only | mandatory | A unique value for each device, starts at 0 and remains unchanged from one re-initialization of the agent to the next |
| 1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.2 | ColumnsieDWDevicePort | read-only | mandatory | The SCSI port number where this device is attached |
| 1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.3 | ColumnsieDWActiveDevicePort | read-only | mandatory | The SCSI port number where this device is attached, when MultiPath is installed this is the active port |
| 1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.4 | ColumnsieDWPassiveDevicePort1 | read-only | mandatory | When MultiPath is installed this is the SCSI port number of the first passive port where this device is attached |
| 1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.5 | ColumnsieDWPassiveDevicePort2 | read-only | mandatory | When MultiPath is installed this is the SCSI port number of the second passive port where this device is attached |
| 1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.6 | ColumnsieDWPassiveDevicePort3 | read-only | mandatory | When MultiPath is installed this is the SCSI port number of the third passive port where this device is attached |
| 1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.7 | ColumnsieDWDevicePath | read-only | mandatory | The SCSI path number (should be bus number) where this device is attached |
| 1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.8 | ColumnsieDWDeviceTarget | read-only | mandatory | The SCSI target ID of this device |
| 1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.9 | ColumnsieDWDeviceLun | read-only | mandatory | The SCSI lun of this device |
| 1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.10 | ColumnsieDWDeviceDisk | read-only | mandatory | The operating system's internal number for this device; e.g. NT: disk 2 |
| 1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.11 | ColumnsieDWDeviceSizelo | read-only | mandatory | Size of the device in blocks (low part) |
| 1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.12 | ColumnsieDWDeviceSizehi | read-only | mandatory | Size of the device in blocks (high part) |
| 1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.13 | ColumnsieDWDeviceSizeMBlo | read-only | mandatory | Size of the device in MB (low part) |
| 1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.14 | ColumnsieDWDeviceSizeMBhi | read-only | mandatory | Size of the device in MB (high part) |
| 1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.15 | ColumnsieDWDeviceInquiryString | read-only | mandatory | The SCSI inquiry string of this device |
| 1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.16 | ColumnsieDWDeviceDriverName | read-only | mandatory | The name of the operating system's driver that handles the device |
| 1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.17 | ColumnsieDWDuplexStatus | read-write | mandatory | The status of the DW group where this device is part of: online: the device is in perfect order (GET/SET) error: the device had a fault (GET/SET) recover: the … |
| 1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.18 | ColumnsieDWDuplexReason | read-only | mandatory | The reason for an error of the DW group where this device is part of |
| 1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.19 | ColumnsieDWDuplexNumber | read-only | mandatory | The DW internal number of the DW group where this device is part of |
| 1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.20 | ColumnsieDWDuplexPiece | read-only | mandatory | The internal number this device has inside its DW group |
| 1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.21 | ColumnsieDWDuplexSizelo | read-only | mandatory | The size of the DW group in blocks where this device is part of (low part) |
| 1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.22 | ColumnsieDWDuplexSizehi | read-only | mandatory | The size of the DW group in blocks where this device is part of (high part) |
| 1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.23 | ColumnsieDWDuplexSizeMBlo | read-only | mandatory | The size of the DW group in MB where this device is part of (low part) |
| 1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.24 | ColumnsieDWDuplexSizeMBhi | read-only | mandatory | The size of the DW group in MB where this device is part of (high part) |
| 1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.25 | ColumnsieDWDuplexRecoverProgress | read-only | mandatory | The progress in percent of a recovery of the DW group where this device is part of |
| 1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.26 | ColumnsieDWDuplexCreate | read-write | mandatory | Command to create a DW group with this device |
| 1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.27 | ColumnsieDWDuplexAdd | read-write | mandatory | Command to add device <diskNumber> to the DW group with this device |
| 1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.28 | ColumnsieDWDuplexCopy | read-write | mandatory | Command to recover (catchup) device <diskNumber> inside its DW group |
| 1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.29 | ColumnsieDWDuplexDelete | read-write | mandatory | Command to delete this device from its DW group - if it's the last device of its group the group is destroyed |
| 1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.30 | ColumnsieDWDuplexBehavior | read-write | mandatory | Command to include/exclude this device from being used by DW; Command to set this device as preferred device in this DW for reading |
| 1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.31 | ColumnsieDWDuplexName | read-write | mandatory | The DW internal name of the DW group where this device is part of |
| 1.3.6.1.4.1.231.2.10.2.2.8.10 | NodesieDWTrapInfo | |||
| 1.3.6.1.4.1.231.2.10.2.2.8.10.1 | ScalarsieDWTrapServerName | not-accessible | mandatory | Name of the server where the trap occured |
| 1.3.6.1.4.1.231.2.10.2.2.8.10.2 | ScalarsieDWTrapTime | not-accessible | mandatory | Time the trap occured (in seconds since 1/1/1970 00:00:00) |
| 1.3.6.1.4.1.231.2.10.2.2.8.10.3 | ScalarsieDWTrapGroupID | not-accessible | mandatory | The DuplexWrite Group ID where the change occured |
| 1.3.6.1.4.1.231.2.10.2.2.8.10.4 | ScalarsieDWTrapPortID | not-accessible | mandatory | The DuplexWrite Port ID where the change occured |
| 1.3.6.1.4.1.231.2.10.2.2.8.10.5 | ScalarsieDWTrapPathID | not-accessible | mandatory | The DuplexWrite Path ID where the change occured |
| 1.3.6.1.4.1.231.2.10.2.2.8.10.6 | ScalarsieDWTrapTargetID | not-accessible | mandatory | The DuplexWrite Target ID where the change occured |
| 1.3.6.1.4.1.231.2.10.2.2.8.10.7 | ScalarsieDWTrapLunID | not-accessible | mandatory | The DuplexWrite Lun ID where the change occured |
| 1.3.6.1.4.1.231.2.10.2.2.8.10.8 | ScalarsieDWTrapError | not-accessible | mandatory | The DuplexWrite error code for certain traps |
| 1.3.6.1.4.1.231.2.10.2.1300 | NodesieDWNewConfig | Trap occurs after the driver has created a new DuplexWrite group or has added a device to an existing DuplexWrite group as requested by the configuration utili… | ||
| 1.3.6.1.4.1.231.2.10.2.1301 | NodesieDWPieceRemoved | Trap occurs after the driver has removed a device from a DuplexWrite group. The action was requested by the configuration utility. | ||
| 1.3.6.1.4.1.231.2.10.2.1302 | NodesieDWConfigRemoved | Trap occurs after the driver has removed a DuplexWrite group. The action was requested by the configuration utility. | ||
| 1.3.6.1.4.1.231.2.10.2.1303 | NodesieDWStatusSet | Trap occurs after the driver has set the status of a DuplexWrite group. The action was requested by the configuration utility. | ||
| 1.3.6.1.4.1.231.2.10.2.1304 | NodesieDWUpdateStatus | Trap occurs after the driver has updated the status of a DuplexWrite group. | ||
| 1.3.6.1.4.1.231.2.10.2.1305 | NodesieDWPieceRecovered | Trap occurs after the driver has sucessfully recovered a DuplexWrite group as requested by the configuration utility. Both pieces are ONLINE. | ||
| 1.3.6.1.4.1.231.2.10.2.1306 | NodesieDWRecoverAborted | Trap occurs after the driver has aborted the recovery process of a DuplexWrite group as requested by the configuration utility. | ||
| 1.3.6.1.4.1.231.2.10.2.1307 | NodesieDWReservationConflict | Trap occurs after the driver has detected a reservation conflict. A whole DuplexWrite group is not accessible from now on. This is only an error if it happens … | ||
| 1.3.6.1.4.1.231.2.10.2.1308 | NodesieDWConfigChanged | Trap occurs after the driver has done a rescan/reread and found a new configuration. | ||
| 1.3.6.1.4.1.231.2.10.2.1309 | NodesieDWConfigInvalidated | Trap occurs after the driver has invalidated the configuration information for a device as requested by the DuplexWrite cluster service. The configuration info… | ||
| 1.3.6.1.4.1.231.2.10.2.1310 | NodesieDWActiveLunChanged | Trap occurs after the driver has changed the path for read commands to a specified device of a DuplexWrite group. | ||
| 1.3.6.1.4.1.231.2.10.2.1311 | NodesieDWPieceFailed | Trap occurs after the driver has detected an error on one of the devices of a DuplexWrite group. | ||
| 1.3.6.1.4.1.231.2.10.2.1312 | NodesieDWRootFlagChanged | Trap occurs after the driver has changed the root behavior of a DuplexWrite group. | ||
| 1.3.6.1.4.1.231.2.10.2.1313 | NodesieDWNameChanged | Trap occurs after the driver has changed the name of a DuplexWrite group. | ||
| 1.3.6.1.4.1.231.2.10.2.1314 | NodesieDWForceActive | Trap occurs after the driver has marked a disk of a DuplexWrite group forced active at next boot. The partner disk can be used for a snapshot. | ||
| 1.3.6.1.4.1.231.2.10.2.1350 | NodesieDWRefreshFinished | Trap occurs after the driver interface has updated the internal data structures. | ||
| 1.3.6.1.4.1.231.2.10.2.1351 | NodesieDWDiskRegistered | Trap occurs after the driver interface has modified the registry so that after the next reboot a disk is registered/unregistered. |