MIB Viewer

SIEMENS-HP4KHIM-MIB

441 objects
No module-level DESCRIPTION found.
Imported Objects
SNMPv2-CONFNOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMICounter32 enterprises Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TCDisplayString MacAddress TEXTUAL-CONVENTION
OIDNameAccessStatusDescription
1.3.6.1.4.1.4329Nodesiemens
1.3.6.1.4.1.4329.2NodeiandcAdmin
1.3.6.1.4.1.4329.2.51Identityhp4khim
1.3.6.1.4.1.4329.2.51.1NodehimWelcomePage
1.3.6.1.4.1.4329.2.51.1.1TablehimWelPgTablenot-accessiblecurrent
1.3.6.1.4.1.4329.2.51.1.1.1RowhimWelPgEntrynot-accessiblecurrent
1.3.6.1.4.1.4329.2.51.1.1.1.1ColumnhimWelPgPabxIdread-onlycurrent
1.3.6.1.4.1.4329.2.51.1.1.1.2ColumnhimWelPgSysNoread-onlycurrentThis field contains the system number (max. 17 characters).
1.3.6.1.4.1.4329.2.51.1.1.1.3ColumnhimHP4KVersionread-onlycurrentThis field contains the Hicom/HiPath version number of the system (max. 4 characters).
1.3.6.1.4.1.4329.2.51.1.1.1.4ColumnhimSystemReleaseread-onlycurrentThis field contains the system release number of the system (max. 2 characters).
1.3.6.1.4.1.4329.2.51.1.1.1.5ColumnhimRevisionLevelread-onlycurrentThis field contains the revision number of the system software (max. 2 characters).
1.3.6.1.4.1.4329.2.51.1.1.1.6ColumnhimHWArchitectureread-onlycurrentThis field contains the information on hardware architecture in the format [hw-architecture][system-variant][hw-design] [hw-architecture] Abbreviation describi…
1.3.6.1.4.1.4329.2.51.1.1.1.7ColumnhimHWArchitectureTyperead-onlycurrentThis field contains abbreviation describing hardware architecture type (max. 3 characters).
1.3.6.1.4.1.4329.2.51.1.1.1.8ColumnhimOperationModeread-onlycurrentThis field contains the operating mode of the system. Possible Values: SIMPLEX: OPERATING MODE SIMPLEX DUPLEX: OPERATING MODE DUPLEX REDUNDANCY
1.3.6.1.4.1.4329.2.51.1.1.1.9ColumnhimSWUProc1read-onlycurrentThese fields contains the name of the SWU processor board (max. 8 characters). SWU = Switching Unit Possible values: - CC-A - CC-B
1.3.6.1.4.1.4329.2.51.1.1.1.10ColumnhimSWUMemory1read-onlycurrentThese fields contain the size of the SWU memory for each processor card. SWU = Switching Unit
1.3.6.1.4.1.4329.2.51.1.1.1.11ColumnhimSWUProc2read-onlycurrentThese fields contains the name of the SWU processor board (max. 8 characters). SWU = Switching Unit Possible values: - CC-A - CC-B
1.3.6.1.4.1.4329.2.51.1.1.1.12ColumnhimSWUMemory2read-onlycurrentThese fields contain the size of the SWU memory for each processor card. SWU = Switching Unit
1.3.6.1.4.1.4329.2.51.2NodehimSwitchData
1.3.6.1.4.1.4329.2.51.2.1TablehimTechInfoTablenot-accessiblecurrent
1.3.6.1.4.1.4329.2.51.2.1.1RowhimTechInfoEntrynot-accessiblecurrent
1.3.6.1.4.1.4329.2.51.2.1.1.1ColumnhimTechInfoPabxIdread-onlycurrent
1.3.6.1.4.1.4329.2.51.2.1.1.2ColumnhimTechInfoInfoNoread-onlycurrentThis field contains the number of the subsystem. This number can be assigned as required when configuring the subsystem.
1.3.6.1.4.1.4329.2.51.2.1.1.3ColumnhimTechInfoDateread-onlycurrentThis field contains the date on which the subsystem was configured.
1.3.6.1.4.1.4329.2.51.2.1.1.4ColumnhimTechInfoTechnicalDataread-onlycurrentThis field contains the technical data of the subsystem.
1.3.6.1.4.1.4329.2.51.2.1.1.5ColumnhimTechInfoNumberread-onlycurrentThis field contains the number of each subsystem configured.
1.3.6.1.4.1.4329.2.51.2.1.1.6ColumnhimTechInfoExtraTextread-onlycurrentThis field contains additional text.
1.3.6.1.4.1.4329.2.51.2.2TablehimNotepadDataTablenot-accessiblecurrentThis node contains the system data entered in a notepad. The table for notepad entries holds a maximum of 30 data records.
1.3.6.1.4.1.4329.2.51.2.2.1RowhimNotepadDataEntrynot-accessiblecurrent
1.3.6.1.4.1.4329.2.51.2.2.1.1ColumnhimNotepadDataPabxIdread-onlycurrent
1.3.6.1.4.1.4329.2.51.2.2.1.2ColumnhimNotepadDataInfoNoread-onlycurrentThis field contains the number of the subsystem. This number is assigned permanently when configuring the subsystem.
1.3.6.1.4.1.4329.2.51.2.2.1.3ColumnhimNotepadDataDateread-onlycurrentThis field contains the date on which the subsystem was configured.
1.3.6.1.4.1.4329.2.51.2.2.1.4ColumnhimNotepadDataTextread-onlycurrentThis field contains the technical data of the subsystem.
1.3.6.1.4.1.4329.2.51.2.3TablehimProjPlanInfoTablenot-accessiblecurrentThis screen makes it possible to generate a file with project planning data.
1.3.6.1.4.1.4329.2.51.2.3.1RowhimProjPlanInfoEntrynot-accessiblecurrent
1.3.6.1.4.1.4329.2.51.2.3.1.1ColumnhimProjPlanPabxIdread-onlycurrent
1.3.6.1.4.1.4329.2.51.2.3.1.2ColumnhimProjPlanInfoFileread-onlycurrentThis field contains the name of the project planning file.
1.3.6.1.4.1.4329.2.51.2.3.1.3ColumnhimProjPlanInfoCreationDateread-onlycurrentThis field contains the date on which the project planning file was generated.
1.3.6.1.4.1.4329.2.51.2.3.1.4ColumnhimProjPlanInfoCreationTimeread-onlycurrentThis field contains the time at which the project planning file was generated.
1.3.6.1.4.1.4329.2.51.3NodehimSpecSwitchData
1.3.6.1.4.1.4329.2.51.3.1TablehimSpecShelfDataTablenot-accessiblecurrentAll subscriber and trunk-related lines are grouped within LTU (Line/Trunk Unit) frames. Each frame has several slots for modules. The frame is connected to the…
1.3.6.1.4.1.4329.2.51.3.1.1RowhimSpecShelfDataEntrynot-accessiblecurrent
1.3.6.1.4.1.4329.2.51.3.1.1.1ColumnhimSpecShelfDataPabxIdread-onlycurrent
1.3.6.1.4.1.4329.2.51.3.1.1.2ColumnhimSpecShelfDataAddressread-onlycurrentThis field contains the address of the shelf in format LTG.LTU. LTG:Line/Trunk Group LTU: Line/Trunk Unit
1.3.6.1.4.1.4329.2.51.3.1.1.3ColumnhimSpecShelfDataFrameTyperead-onlycurrentThis field contains the part number of the frame.
1.3.6.1.4.1.4329.2.51.3.1.1.4ColumnhimSpecShelfDataLTUread-onlycurrentThis field contains type of LTU (Line/Trunk Unit) frame. Possible values for LTU frame type: - PREATL - frametype for Preatlantic Hicom Types - CC40F - basisfr…
1.3.6.1.4.1.4329.2.51.3.1.1.5ColumnhimSpecShelfDataNetworkTyperead-onlycurrentThis field contains connection type of LTU frame / AP shelf.
1.3.6.1.4.1.4329.2.51.3.1.1.6ColumnhimSpecShelfDataNetworkAddressread-onlycurrentThis field contains network IP address.
1.3.6.1.4.1.4329.2.51.3.1.1.7ColumnhimSpecShelfDataRemoteread-onlycurrentThis field shows if frame is remote. Possible values: - yes - frame is remote - no - frame is not remote
1.3.6.1.4.1.4329.2.51.3.1.1.8ColumnhimSpecShelfDataLocationread-onlycurrentThis field contains postal address (city, street, building, ..) , where a FLEX LTU or an AP shelf is located.
1.3.6.1.4.1.4329.2.51.3.1.1.9ColumnhimSpecShelfDataLTUCread-onlycurrentThis field contains part number adding LTUC module. LTUC: Line/Trunk Unit Control.
1.3.6.1.4.1.4329.2.51.3.2TablehimSWUBoardTablenot-accessiblecurrentThis table contains the configuration of the peripheral boards. Periphery Assemblies Peripheral and ring generator assemblies as well as SIU are configured in …
1.3.6.1.4.1.4329.2.51.3.2.1RowhimSWUBoardEntrynot-accessiblecurrent
1.3.6.1.4.1.4329.2.51.3.2.1.1ColumnhimSWUBoardPabxIdread-onlycurrent
1.3.6.1.4.1.4329.2.51.3.2.1.2ColumnhimSWUBoardPENread-onlycurrentThis field contains the name of the board PEN. PEN: Port Equipment Number The PEN is displayed in the following format: [LTG]-[LTU]-[EBT]. LTG: Line/Trunk Grou…
1.3.6.1.4.1.4329.2.51.3.2.1.3ColumnhimSWUBoardOverlayLTUread-onlycurrentThis field contains the name of the overlay LTU (Line/Trunk Unit).
1.3.6.1.4.1.4329.2.51.3.2.1.4ColumnhimSWUBoardTyperead-onlycurrentThis field contains the name of the configured board.
1.3.6.1.4.1.4329.2.51.3.2.1.5ColumnhimSWUBoardNominalread-onlycurrentThis field contains the name of the nominal board.
1.3.6.1.4.1.4329.2.51.3.2.1.6ColumnhimSWUBoardActualread-onlycurrentThis field contains part number of the board that is plugged in.
1.3.6.1.4.1.4329.2.51.3.2.1.7ColumnhhimSWUBoardFirmwareread-onlycurrentThis field contains the name of the firmware.
1.3.6.1.4.1.4329.2.51.3.2.1.8ColumnhimSWUBoardRevread-onlycurrentThis field contains the revision of the board.
1.3.6.1.4.1.4329.2.51.3.2.1.9ColumnhimSWUBoardFunctIdread-onlycurrentFunction identification number for boards with more than one functions (e.g. SIUX, STMA, SLMO24).
1.3.6.1.4.1.4329.2.51.3.2.1.10ColumnhimSWUBoardModeread-onlycurrentThis field contains the mode of the board. The mode is only displayed for the RG/ACGEN board.
1.3.6.1.4.1.4329.2.51.3.2.1.11ColumnhimSWUBoardLWNoread-onlycurrentThis field contains the number of the loadware.
1.3.6.1.4.1.4329.2.51.3.2.1.12ColumnhimSWUBoardLWInterVerread-onlycurrentThis field contains the interface version of the board.
1.3.6.1.4.1.4329.2.51.3.2.1.13ColumnhimSWUBoardLWNameread-onlycurrentThis field contains the file name of the loadware file or of the initialization file.
1.3.6.1.4.1.4329.2.51.3.2.1.14ColumnhimSWUBoardLWDateread-onlycurrentThis field contains the date on which the loadware or the initialization file was generated.
1.3.6.1.4.1.4329.2.51.4NodehimSWUPeriphery
1.3.6.1.4.1.4329.2.51.4.1TablehimPSIOAssTablenot-accessiblecurrentThis table contains the PSIO assemblies data.
1.3.6.1.4.1.4329.2.51.4.1.1RowhimPSIOAssEntrynot-accessiblecurrent
1.3.6.1.4.1.4329.2.51.4.1.1.1ColumnhimPSIOAssPabxIdread-onlycurrent
1.3.6.1.4.1.4329.2.51.4.1.1.2ColumnhimPSIOAssPENread-onlycurrentThis field contains the name of the board PEN. PEN: Port Equipment Number The PEN is displayed in the following format: [LTG]-[LTU]-[EBT]. LTG: Line/Trunk Grou…
1.3.6.1.4.1.4329.2.51.4.1.1.3ColumnhimPSIOAssAssemblyread-onlycurrentThis field contains the name of the PSIO board. PSIO: Peripheral Serial Input Output
1.3.6.1.4.1.4329.2.51.4.1.1.4ColumnhimPSIOAssActualread-onlycurrentThis field contains the part number of the PSIO board.
1.3.6.1.4.1.4329.2.51.4.1.1.5ColumnhimPSIOAssFirmwareread-onlycurrentThis field contains the firmware name of the PSIO board.
1.3.6.1.4.1.4329.2.51.4.2TablehimSerialLineTablenot-accessiblecurrentThis table contains the serial interfaces data.
1.3.6.1.4.1.4329.2.51.4.2.1RowhimSerialLineEntrynot-accessiblecurrent
1.3.6.1.4.1.4329.2.51.4.2.1.1ColumnhimSerialLinePabxIdread-onlycurrent
1.3.6.1.4.1.4329.2.51.4.2.1.2ColumnhimSerialLineNumberread-onlycurrentThis field contains the physical line number of the interface. Possible Values: numeric, 8-63
1.3.6.1.4.1.4329.2.51.4.2.1.3ColumnhimSerialLineBoardTyperead-onlycurrentThis field contains abbreviation name of the board type.
1.3.6.1.4.1.4329.2.51.4.2.1.4ColumnhimSerialLineSpeedread-onlycurrentThis field contains standardized transmission speed (baud rate). Possible Values: 50, 100, 200, 300, 600, 1200, 2400, 4800, 9600, 19200.
1.3.6.1.4.1.4329.2.51.4.2.1.5ColumnhimSerialLineLogDevNameread-onlycurrentThis field contains the logical device name of the line. Possible Values: Value - Description CON1 - LOGICAL DEVICE CONNECTION,TERMINAL 1 CON2 - LOGICAL DEVICE…
1.3.6.1.4.1.4329.2.51.4.2.1.6ColumnhimSerialLineDevTyperead-onlycurrentThis field contains the device type of the line. Possible Values: Value - Description PT88 - DEVICE TYPE QUOSC - QUME-ONLY-SCREEN QUOPT - QUME-ONLY-PT88 QUSCAP…
1.3.6.1.4.1.4329.2.51.4.2.1.7ColumnhimSerialLineTyperead-onlycurrentThis field contains the line type (operation of synchronous lines (terminals) connected via V24 modems). Possible values: - ASY: asynchronous line type - V24: …
1.3.6.1.4.1.4329.2.51.4.3TablehimSCSIDevTablenot-accessiblecurrentThis table contains the data for the SCSI devices connected.
1.3.6.1.4.1.4329.2.51.4.3.1RowhimSCSIDevEntrynot-accessiblecurrent
1.3.6.1.4.1.4329.2.51.4.3.1.1ColumnhimSCSIDevPabxIdread-onlycurrent
1.3.6.1.4.1.4329.2.51.4.3.1.2ColumnhimSCSIDevIdread-onlycurrentThis field contains the type of SCSI device.
1.3.6.1.4.1.4329.2.51.4.3.1.3ColumnhimSCSIDevTyperead-onlycurrentThis field contains the SCSI ID of the device.
1.3.6.1.4.1.4329.2.51.4.3.1.4ColumnhimSCSIDevNameread-onlycurrentThis field contains the name of the SCSI device in format: [vendor] [product number].
1.3.6.1.4.1.4329.2.51.4.3.1.5ColumnhimSCSIDevFirmwareread-onlycurrentThis field contains the firmware name of the SCSI device.
1.3.6.1.4.1.4329.2.51.4.3.1.6ColumnhimSCSIDevLoadDriveread-onlycurrentThis field displays (if activity is in progress) the device from which the operating system and the database are started.
1.3.6.1.4.1.4329.2.51.5NodehimCentralSwitchData
1.3.6.1.4.1.4329.2.51.5.1TablehimCabinetTablenot-accessiblecurrentThis table contains the data for configuring the cabinets and frames in a system. They reflect the physical structure of the system.
1.3.6.1.4.1.4329.2.51.5.1.1RowhimCabinetEntrynot-accessiblecurrent
1.3.6.1.4.1.4329.2.51.5.1.1.1ColumnhimCabPabxIdread-onlycurrent
1.3.6.1.4.1.4329.2.51.5.1.1.2ColumnhimCabAddrread-onlycurrentThis field contains the cabinet address. Structure of cabinet address: P 1 01 | | |__Number of cabinet in cabinet row | |_____Units, position of cabinet row |_…
1.3.6.1.4.1.4329.2.51.5.1.1.3ColumnhimCabPhysAddrread-onlycurrent
1.3.6.1.4.1.4329.2.51.5.1.1.4ColumnhimCabCabinetread-onlycurrentThis field contains the name of the cabinet.
1.3.6.1.4.1.4329.2.51.5.1.1.5ColumnhimCabPartNoread-onlycurrentThis field contains the part number of the cabinet.
1.3.6.1.4.1.4329.2.51.5.1.1.6ColumnhimCabShelfNoread-onlycurrentThis field contains the number of the shelf.
1.3.6.1.4.1.4329.2.51.5.1.1.7ColumnhimCabFrameread-onlycurrentThis field contains the name of the frame.
1.3.6.1.4.1.4329.2.51.5.1.1.8ColumnhimCabPid1read-onlycurrentThis field contains the processor ID 1.
1.3.6.1.4.1.4329.2.51.5.1.1.9ColumnhimCabPid2read-onlycurrentThis field contains the processor ID 2.
1.3.6.1.4.1.4329.2.51.5.1.1.10ColumnhimCabPid3read-onlycurrentThis field contains the processor ID 2.
1.3.6.1.4.1.4329.2.51.5.1.1.11ColumnhimCabLTUNoread-onlycurrentThis field contains the number of the LTU (Line/Trunk Unit). The LTU range is divided in two parts: HHS (HICOM Host System) and AP (Access Point). The availabl…
1.3.6.1.4.1.4329.2.51.5.2TablehimMemScalingTablenot-accessiblecurrentThis screen contains the memory parameters for each of the devices or features specified. The values are only displayed in Configuration Management. See also D…
1.3.6.1.4.1.4329.2.51.5.2.1RowhimMemScalingEntrynot-accessiblecurrent
1.3.6.1.4.1.4329.2.51.5.2.1.1ColumnhimMemScalingPabxIdread-onlycurrent
1.3.6.1.4.1.4329.2.51.5.2.1.2ColumnhimMemScalingUnitread-onlycurrentThis field contains the parameter name (AMO DIMSU).
1.3.6.1.4.1.4329.2.51.5.2.1.3ColumnhimMemScalingUsedread-onlycurrentThis value specifies the number of memory elements already used up. The comparison with the value in the Maximum field indicates how much of the allocated memo…
1.3.6.1.4.1.4329.2.51.5.2.1.4ColumnhimMemScalingMaxUsedread-onlycurrentThis field contains the number of memory elements allocated.
1.3.6.1.4.1.4329.2.51.5.2.1.5ColumnhimMemScalingAllocatedread-onlycurrentThis field displays the maximum number of memory elements that once have been used up during the lifetime of the switch ('high water mark'). It gives an indica…
1.3.6.1.4.1.4329.2.51.5.2.1.6ColumnhimMemScalingStandardread-onlycurrentStandard is the advised value to be set in the Maximum field, if you don't have special needs to set it to a specific value. If you set all devices and feature…
1.3.6.1.4.1.4329.2.51.5.2.1.7ColumnhimMemScalingSysMaxread-onlycurrentThis field contains the maximum number of possible memory elements.
1.3.6.1.4.1.4329.2.51.6NodehimGeneralSwitchData
1.3.6.1.4.1.4329.2.51.6.1NodehimDBConfSys
1.3.6.1.4.1.4329.2.51.6.1.1TablehimDBConfSysTablenot-accessiblecurrent
1.3.6.1.4.1.4329.2.51.6.1.1.1RowhimDBConfSysEntrynot-accessiblecurrent
1.3.6.1.4.1.4329.2.51.6.1.1.1.1ColumnhimDBConfSysPabxIdread-onlycurrent
1.3.6.1.4.1.4329.2.51.6.1.1.1.2ColumnhimDBConfSysClass1read-onlycurrentThis field contains the name of the system.
1.3.6.1.4.1.4329.2.51.6.1.1.1.3ColumnhimDBConfSysClass2read-onlycurrentThis field contains the coded name of the system.
1.3.6.1.4.1.4329.2.51.6.1.1.1.4ColumnhimDBConfSysHWAss1read-onlycurrentThis field contains the hardware ID of the system.
1.3.6.1.4.1.4329.2.51.6.1.1.1.5ColumnhimDBConfSysHWAss2read-onlycurrentThis field contains the shortened hardware ID of the system.
1.3.6.1.4.1.4329.2.51.6.1.1.1.6ColumnhimDBConfSysDevLine1read-onlycurrentThis field contains the name of the product line.
1.3.6.1.4.1.4329.2.51.6.1.1.1.7ColumnhimDBConfSysDevLine2read-onlycurrentThis field contains the shortened name of the product line. Possible values: - H300: EUROPE DEVELOPMENT - HUSA: US DEVELOPMENT
1.3.6.1.4.1.4329.2.51.6.1.1.1.8ColumnhimDBConfSysOpModeread-onlycurrentThis field contains the operating mode of the system. Possible Values: - SIMPLEX: OPERATING MODE SIMPLEX - DUPLEX: OPERATING MODE DUPLEX REDUNDANCY
1.3.6.1.4.1.4329.2.51.6.1.1.1.9ColumnhimDBConfSysResTyperead-onlycurrentThis field contains the restart identifier.
1.3.6.1.4.1.4329.2.51.6.1.1.1.10ColumnhimDBConfSysHWArchread-onlycurrentThis field contains the name of the hardware architecture.
1.3.6.1.4.1.4329.2.51.6.1.1.1.11ColumnhimDBConfSysHWArchTyperead-onlycurrentThis field contains the name of the hardware architecture type.
1.3.6.1.4.1.4329.2.51.6.1.1.1.12ColumnhimDBConfSysNoread-onlycurrentThis field contains the number of the system.
1.3.6.1.4.1.4329.2.51.6.1.1.1.13ColumnhimDBConfSysLocread-onlycurrentThis field contains the name of the location in which the system is installed. Possible Values: - CUSTOMER (customer) - SUPPORT (support) - TESTLAB (testlab)
1.3.6.1.4.1.4329.2.51.6.1.1.1.14ColumnhimDBConfSysBaseAppread-onlycurrentThis field contains the name of the base application.
1.3.6.1.4.1.4329.2.51.6.1.1.1.15ColumnhimDBConfSysDBAppread-onlycurrentThis field contains the name of the database application.
1.3.6.1.4.1.4329.2.51.6.1.1.1.16ColumnhimDBConfSysIDread-onlycurrentThis field contains the system identification.
1.3.6.1.4.1.4329.2.51.6.2NodehimDBConfHW
1.3.6.1.4.1.4329.2.51.6.2.1TablehimDBConfHWTablenot-accessiblecurrent
1.3.6.1.4.1.4329.2.51.6.2.1.1RowhimDBConfHWEntrynot-accessiblecurrent
1.3.6.1.4.1.4329.2.51.6.2.1.1.1ColumnhimDBConfHWPabxIdread-onlycurrent
1.3.6.1.4.1.4329.2.51.6.2.1.1.2ColumnhimDBConfHWLTGread-onlycurrentThis field contains the number of LTGs in the system. LTG: Line/Trunk Group
1.3.6.1.4.1.4329.2.51.6.2.1.1.3ColumnhimDBConfHWLTUread-onlycurrentThis field contains the number of LTUs in the system. LTU: Line/Trunk Unit
1.3.6.1.4.1.4329.2.51.6.2.1.1.4ColumnhimDBConfHWLinesread-onlycurrentThis field contains the number of lines in the system.
1.3.6.1.4.1.4329.2.51.6.2.1.1.5ColumnhimDBConfHWPortsread-onlycurrentThis field contains the number of ports in the system.
1.3.6.1.4.1.4329.2.51.6.2.1.1.6ColumnhimDBConfHWPBCread-onlycurrentThis field contains the number of peripheral board controllers (PBC) in the system.
1.3.6.1.4.1.4329.2.51.6.2.1.1.7ColumnhimDBConfHWMTSBdPerGSNread-onlycurrentThis field contains the number of memory time switches (MTS) per group switching network (GSN).
1.3.6.1.4.1.4329.2.51.6.2.1.1.8ColumnhimDBConfHWSIUPPerLTUread-onlycurrentThis field contains the number of SIUP boards per LTU (Line/Trunk Unit).
1.3.6.1.4.1.4329.2.51.6.2.1.1.9ColumnhimDBConfHWDIUCPerLTUread-onlycurrentThis field contains the number of DIUC boards per LTU (Line/Trunk Unit).
1.3.6.1.4.1.4329.2.51.6.2.1.1.10ColumnhimDBConfHWHwyPerMTSBdread-onlycurrentThis field contains the number highways (HYW) per MTS board.
1.3.6.1.4.1.4329.2.51.6.2.1.1.11ColumnhimDBConfHWHDLCPerDCLread-onlycurrentThis field contains the number of high level data link control (HDLC) channels per data communication link (DCL).
1.3.6.1.4.1.4329.2.51.6.2.1.1.12ColumnhimDBConfHWPBCPerDCLread-onlycurrentThis field contains the number of peripheral board controllers (PBC) per data communication link (DCL).
1.3.6.1.4.1.4329.2.51.6.2.1.1.13ColumnhimDBConfHWStdSIULineread-onlycurrentThis field contains the number of signaling unit lines. SIU: Signaling-Unit
1.3.6.1.4.1.4329.2.51.6.2.1.1.14ColumnhimDBConfHWConfLineread-onlycurrentThis field contains the number of lines in the CONFERENCE board.
1.3.6.1.4.1.4329.2.51.6.2.1.1.15ColumnhimDBConfHWDBDimread-onlycurrentThis field contains the name of the database dimensioning.
1.3.6.1.4.1.4329.2.51.6.2.1.1.16ColumnhimDBConfHWTableVerread-onlycurrentThis field contains the version of the Conf table.
1.3.6.1.4.1.4329.2.51.6.3NodehimHWData
1.3.6.1.4.1.4329.2.51.6.3.1TablehimHWDataTablenot-accessiblecurrent
1.3.6.1.4.1.4329.2.51.6.3.1.1RowhimHWDataEntrynot-accessiblecurrent
1.3.6.1.4.1.4329.2.51.6.3.1.1.1ColumnhimHWDataPabxIdread-onlycurrent
1.3.6.1.4.1.4329.2.51.6.3.1.1.2ColumnhimHWArchread-onlycurrentThis field contains the name of the hardware architecture.
1.3.6.1.4.1.4329.2.51.6.3.1.1.3ColumnhimHWArchTyperead-onlycurrentThis field contains the name of the hardware architecture type.
1.3.6.1.4.1.4329.2.51.6.3.1.1.4ColumnhimHWOpModeread-onlycurrentThis field contains the name of the operating mode.
1.3.6.1.4.1.4329.2.51.6.3.1.1.5ColumnhimHWSWUProc1read-onlycurrentThese fields contain the name of the SWU processor board (max. 8 characters). SWU = Switching Unit Possible values: - CC-A - CC-B
1.3.6.1.4.1.4329.2.51.6.3.1.1.6ColumnhimHWSWUMem1read-onlycurrentThese fields contain the size of the SWU memory for each processor board. SWU = Switching Unit
1.3.6.1.4.1.4329.2.51.6.3.1.1.7ColumnhimHWSWUProc2read-onlycurrentThese fields contain the name of the SWU processor board (max. 8 characters). SWU = Switching Unit Possible values: - CC-A - CC-B
1.3.6.1.4.1.4329.2.51.6.3.1.1.8ColumnhimHWSWUMem2read-onlycurrentThese fields contain the size of the SWU memory for each processor board. SWU = Switching Unit
1.3.6.1.4.1.4329.2.51.6.3.1.1.9ColumnhimHWADPProcread-onlycurrentThis field contains the name of the ADP processor.
1.3.6.1.4.1.4329.2.51.6.3.1.1.10ColumnhimHWADPMemread-onlycurrentThis field contains the size of memory used by the ADP.
1.3.6.1.4.1.4329.2.51.6.4NodehimLWDataOnCB
1.3.6.1.4.1.4329.2.51.6.4.1TablehimLWDataOnCBTablenot-accessiblecurrent
1.3.6.1.4.1.4329.2.51.6.4.1.1RowhimLWDataOnCBEntrynot-accessiblecurrent
1.3.6.1.4.1.4329.2.51.6.4.1.1.1ColumnhimLWDataOnCBPabxIdread-onlycurrent
1.3.6.1.4.1.4329.2.51.6.4.1.1.2ColumnhimLWOnCBAssread-onlycurrentThis field contains the hardware ID of the board. Note: Certain types of processor boards (e. g. DPC5) are using only firmware. Therefore, no loadware data is …
1.3.6.1.4.1.4329.2.51.6.4.1.1.3ColumnhimLWOnCBPBCAddrread-onlycurrentThis field contains the peripheral board controller (PBC) address of the module. Note: Certain types of processor boards (e. g. DPC5) are using only firmware. …
1.3.6.1.4.1.4329.2.51.6.4.1.1.4ColumnhimLWOnCBFileNameread-onlycurrentThis field contains the filename of the loadware file. Note: Certain types of processor boards (e. g. DPC5) are using only firmware. Therefore, no loadware dat…
1.3.6.1.4.1.4329.2.51.6.4.1.1.5ColumnhimLWOnCBProdTimeread-onlycurrentThis field contains the production date of the loadware. Note:Certain types of processor boards (e. g. DPC5) are using only firmware. Therefore, no loadware da…
1.3.6.1.4.1.4329.2.51.6.5NodehimLWDataOnProc
1.3.6.1.4.1.4329.2.51.6.5.1TablehimLWOnProcTablenot-accessiblecurrent
1.3.6.1.4.1.4329.2.51.6.5.1.1RowhimLWOnProcEntrynot-accessiblecurrent
1.3.6.1.4.1.4329.2.51.6.5.1.1.1ColumnhimLWOnProcPabxIdread-onlycurrent
1.3.6.1.4.1.4329.2.51.6.5.1.1.2ColumnhimLWOnProcAssread-onlycurrentThis field contains the name of the directory where the file with information on Loadware resides, e. g. CCA, CCB or ADP (max. 3 characters).
1.3.6.1.4.1.4329.2.51.6.5.1.1.3ColumnhimLWOnProcInfoTyperead-onlycurrentThis field contains the boot type. It represents the file name also.
1.3.6.1.4.1.4329.2.51.6.5.1.1.4ColumnhimLWOnProcLWIdread-onlycurrentThis field contains the name of the loadware.
1.3.6.1.4.1.4329.2.51.6.5.1.1.5ColumnhimLWOnProcLWIdCMPread-onlycurrentThis field contains the name of the loadware ID for the CMP. This field contains the '-' character if it is not relevant to this board.
1.3.6.1.4.1.4329.2.51.6.5.1.1.6ColumnhimLWOnProcLWIdLPread-onlycurrentThis field contains the name of the loadware ID for the LP. This field contains the '-' character if it is not relevant to this board.
1.3.6.1.4.1.4329.2.51.6.6NodehimLWDataOnCSIU
1.3.6.1.4.1.4329.2.51.6.6.1TablehimLWOnCSIUTablenot-accessiblecurrentThis table contains the loadware data on the central SIU (Signaling Interface Unit).
1.3.6.1.4.1.4329.2.51.6.6.1.1RowhimLWOnCSIUEntrynot-accessiblecurrent
1.3.6.1.4.1.4329.2.51.6.6.1.1.1ColumnhimLWOnCSIUPabxIdread-onlycurrent
1.3.6.1.4.1.4329.2.51.6.6.1.1.2ColumnhimLWOnCSIUNominalread-onlycurrentThis field contains the name of the nominal SIU (Signaling Interface Unit).
1.3.6.1.4.1.4329.2.51.6.6.1.1.3ColumnhimLWOnCSIULWNoread-onlycurrentThis field contains the name of the SIU (Signaling Interface Unit) loadware.
1.3.6.1.4.1.4329.2.51.6.6.1.1.4ColumnhimLWOnCSIUProcread-onlycurrentThis field contains the name of the processor in the SIU (Signaling Interface Unit).
1.3.6.1.4.1.4329.2.51.6.6.1.1.5ColumnhimLWOnCSIUSlotread-onlycurrentThis field contains the name of the SIU (Signaling Interface Unit) slot.
1.3.6.1.4.1.4329.2.51.6.6.1.1.6ColumnhimLWOnCSIUActualread-onlycurrentThis field contains the name of the current SIU (Signaling Interface Unit).
1.3.6.1.4.1.4329.2.51.6.6.1.1.7ColumnhimLWOnCSIUFileNameread-onlycurrentThis field contains the file name of the loadware file or of the initialization file.
1.3.6.1.4.1.4329.2.51.6.6.1.1.8ColumnhimLWOnCSIUFileProdread-onlycurrentThis field contains the date on which the loadware or the initialization file was generated.
1.3.6.1.4.1.4329.2.51.6.7NodehimMacAddress
1.3.6.1.4.1.4329.2.51.6.7.1TablehimMacAddrTablenot-accessiblecurrentThis table contains the C-LAN and IPDA MAC addresses which are read during the boot process.
1.3.6.1.4.1.4329.2.51.6.7.1.1RowhimMacAddrEntrynot-accessiblecurrent
1.3.6.1.4.1.4329.2.51.6.7.1.1.1ColumnhimMacAddrPabxIdread-onlycurrent
1.3.6.1.4.1.4329.2.51.6.7.1.1.2ColumnhimMacAddrProcread-onlycurrentThis field contains the name of the processor (CCA, CCB or ADP - max 3 characters). It is also the name of the Unix directory where the file with information o…
1.3.6.1.4.1.4329.2.51.6.7.1.1.3ColumnhimMacAddrInfoTyperead-onlycurrentThis field contains the condition on which the mac addresses are available.
1.3.6.1.4.1.4329.2.51.6.7.1.1.4ColumnhimMacAddrCLanread-onlycurrentThis field contains the MAC address for UW7 part. The format is following: 'xx xx xx xx xx xx'.
1.3.6.1.4.1.4329.2.51.6.7.1.1.5ColumnhimMacAddrIPDAread-onlycurrentThis field contains the MAC address for RMX part. The format is following: 'xx xx xx xx xx xx'.
1.3.6.1.4.1.4329.2.51.7NodehimFeatures
1.3.6.1.4.1.4329.2.51.7.1NodehimMarketingFeatures
1.3.6.1.4.1.4329.2.51.7.1.1TablehimMarkFeatTablenot-accessiblecurrent
1.3.6.1.4.1.4329.2.51.7.1.1.1RowhimMarkFeatEntrynot-accessiblecurrent
1.3.6.1.4.1.4329.2.51.7.1.1.1.1ColumnhimMarkFeatPabxIdread-onlycurrent
1.3.6.1.4.1.4329.2.51.7.1.1.1.2ColumnhimMarkFeatVerread-onlycurrentThis field contains the version of the software package. Format explanation: H 2 04 | |__SW version (01=EV1.0; 02=EV2.0; 03=EV3.0; 04=HiPath 4000 V1.0; 05=HiPa…
1.3.6.1.4.1.4329.2.51.7.1.1.1.3ColumnhimMarkFeatSerNoread-onlycurrentThis field contains the serial number of the software package.
1.3.6.1.4.1.4329.2.51.7.1.1.1.4ColumnhimMarkFeatHWIdread-onlycurrentThis field contains the dongle ID of the hardware dongle connected.
1.3.6.1.4.1.4329.2.51.7.1.1.1.5ColumnhimMarkFeatInstallDateread-onlycurrentThis field contains the date on which the code word was entered.
1.3.6.1.4.1.4329.2.51.7.1.1.1.6ColumnhimMarkFeatExpiryDateread-onlycurrentThis field contains the date on which the code word will expire.
1.3.6.1.4.1.4329.2.51.7.1.1.1.7ColumnhimMarkFeatConfCoderead-onlycurrentThis field contains codeword entry confirmation code.
1.3.6.1.4.1.4329.2.51.7.1.1.1.8ColumnhimMarkFeatTrialModeActread-onlycurrentThis field shows whether trial mode is active. Possible values: - yes - trial mode is activated - no - trial mode is not activated
1.3.6.1.4.1.4329.2.51.7.1.1.1.9ColumnhimMarkFeatTrialRemDaysread-onlycurrentThis field contains number of remaining days of an active trial mode.
1.3.6.1.4.1.4329.2.51.7.1.2TablehimSalesFeatTablenot-accessiblecurrent
1.3.6.1.4.1.4329.2.51.7.1.2.1RowhimSalesFeatEntrynot-accessiblecurrent
1.3.6.1.4.1.4329.2.51.7.1.2.1.1ColumnhimSalesFeatPabxIdread-onlycurrent
1.3.6.1.4.1.4329.2.51.7.1.2.1.2ColumnhimSalesFeatMarketPackIdread-onlycurrentThis column contains the CM ids of the marketing packages.
1.3.6.1.4.1.4329.2.51.7.1.2.1.3ColumnhimSalesFeatMarketPackread-onlycurrentThis column contains the names of the marketing packages.
1.3.6.1.4.1.4329.2.51.7.1.2.1.4ColumnhimSalesFeatContractread-onlycurrentThis column indicates whether the marketing packages have been purchased.
1.3.6.1.4.1.4329.2.51.7.1.2.1.5ColumnhimSalesFeatUsedread-onlycurrentThis column indicates whether the marketing packages have been used.
1.3.6.1.4.1.4329.2.51.7.1.2.1.6ColumnhimSalesFeatFreeread-onlycurrentThis field contains the number of free packages.
1.3.6.1.4.1.4329.2.51.7.1.2.1.7ColumnhimSalesFeatMarkForTrialread-onlycurrentThis field contains the number of packages (entites) marked for trial or blocked (if the trial mode is not active).
1.3.6.1.4.1.4329.2.51.7.2NodehimTechFeatures
1.3.6.1.4.1.4329.2.51.7.2.1TablehimTechFeatTablenot-accessiblecurrent
1.3.6.1.4.1.4329.2.51.7.2.1.1RowhimTechFeatEntrynot-accessiblecurrentThis table contains all enabled and disabled customer-specific features. Use the Object List view to display a list of all features availavle.
1.3.6.1.4.1.4329.2.51.7.2.1.1.1ColumnhimTechFeatPabxIdread-onlycurrent
1.3.6.1.4.1.4329.2.51.7.2.1.1.2ColumnhimTechFeatIdread-onlycurrentThis field contains the CM id of the customer-specific feature.
1.3.6.1.4.1.4329.2.51.7.2.1.1.3ColumnhimTechFeatNameread-onlycurrentThis field contains the name of the customer-specific feature.
1.3.6.1.4.1.4329.2.51.7.2.1.1.4ColumnhimTechFeatStateread-onlycurrentThis field contains the status of the customer-specific feature.
1.3.6.1.4.1.4329.2.51.8NodehimAPSPatches
1.3.6.1.4.1.4329.2.51.8.1NodehimSwitchAPS
1.3.6.1.4.1.4329.2.51.8.1.1TablehimSwitchAPSTablenot-accessiblecurrent
1.3.6.1.4.1.4329.2.51.8.1.1.1RowhimSwitchAPSEntrynot-accessiblecurrent
1.3.6.1.4.1.4329.2.51.8.1.1.1.1ColumnhimSwitchAPSPabxIdread-onlycurrent
1.3.6.1.4.1.4329.2.51.8.1.1.1.2ColumnhimSwitchAPSNameread-onlycurrent
1.3.6.1.4.1.4329.2.51.8.1.1.1.3ColumnhimSwitchAPSCorrVerread-onlycurrent
1.3.6.1.4.1.4329.2.51.8.1.1.1.4ColumnhimSwitchAPSPartNoread-onlycurrent
1.3.6.1.4.1.4329.2.51.8.2NodehimReplacedAMOs
1.3.6.1.4.1.4329.2.51.8.2.1TablehimReplAMOTablenot-accessiblecurrentThis table displays those AMOs that have been changed since the last system correction version.
1.3.6.1.4.1.4329.2.51.8.2.1.1RowhimReplAMOEntrynot-accessiblecurrent
1.3.6.1.4.1.4329.2.51.8.2.1.1.1ColumnhimReplAMOPabxIdread-onlycurrent
1.3.6.1.4.1.4329.2.51.8.2.1.1.2ColumnhimReplAMOAPSread-onlycurrentThe APS in which the change has been made.
1.3.6.1.4.1.4329.2.51.8.2.1.1.3ColumnhimReplAMONameread-onlycurrentThis field contains the name of the AMO command.
1.3.6.1.4.1.4329.2.51.8.2.1.1.4ColumnhimReplAMOInAPSDirread-onlycurrentThis field contains the name of the subsystem in the DIR file.
1.3.6.1.4.1.4329.2.51.8.2.1.1.5ColumnhimReplAMOSubsystemread-onlycurrentThis field contains the name of the current subsystem.
1.3.6.1.4.1.4329.2.51.8.3NodehimPatchInfo
1.3.6.1.4.1.4329.2.51.8.3.1TablehimPatchInfoTablenot-accessiblecurrentThis table contains information on the software patches that have been implemented.
1.3.6.1.4.1.4329.2.51.8.3.1.1RowhimPatchInfoEntrynot-accessiblecurrent
1.3.6.1.4.1.4329.2.51.8.3.1.1.1ColumnhimPatchInfoPabxIdread-onlycurrent
1.3.6.1.4.1.4329.2.51.8.3.1.1.2ColumnhimPatchInfoPatchNoread-onlycurrentThis field contains the number of the patch.
1.3.6.1.4.1.4329.2.51.8.3.1.1.3ColumnhimPatchInfoPatchGroupread-onlycurrentThis field contains the name of the patch group.
1.3.6.1.4.1.4329.2.51.8.3.1.1.4ColumnhimPatchInfoOptread-onlycurrentThis field represents an indicator that the patch is: - optional: not part of patch packet, - not optional: a part of patch packet (represents the whole list o…
1.3.6.1.4.1.4329.2.51.8.3.1.1.5ColumnhimPatchInfoActHDread-onlycurrentThis field indicates whether the patch is enabled on the hard disk.
1.3.6.1.4.1.4329.2.51.8.3.1.1.6ColumnhimPatchInfoActADPread-onlycurrentThis field indicates whether the patch is enabled on the ADP.
1.3.6.1.4.1.4329.2.51.8.3.1.1.7ColumnhimPatchInfoActBPread-onlycurrentThis field indicates whether the patch is enabled on the A/B processor.
1.3.6.1.4.1.4329.2.51.9NodehimSWVersion
1.3.6.1.4.1.4329.2.51.9.1TablehimSWVerOnProcTablenot-accessiblecurrentThis table contains data on the software versions loaded on the processor boards.
1.3.6.1.4.1.4329.2.51.9.1.1RowhimSWVerOnProcEntrynot-accessiblecurrent
1.3.6.1.4.1.4329.2.51.9.1.1.1ColumnhimSWVerOnProcPabxIdread-onlycurrent
1.3.6.1.4.1.4329.2.51.9.1.1.2ColumnhimSWVerOnProcSrcread-onlycurrentThis field contains the name of the software source.
1.3.6.1.4.1.4329.2.51.9.1.1.3ColumnhimSWVerOnProcSWVerread-onlycurrentThis field contains the name of the software version of the ADP software. The software version is displayed in the following format: [item-code-prefix][hipath-…
1.3.6.1.4.1.4329.2.51.9.1.1.4ColumnhimSWVerOnProcItemCodeNoPrefixread-onlycurrentThis field contains the prefix of the software.
1.3.6.1.4.1.4329.2.51.9.1.1.5ColumnhimSWVerOnProcHP4KVerread-onlycurrentThis field contains the Hicom/HiPath version.
1.3.6.1.4.1.4329.2.51.9.1.1.6ColumnhimSWVerOnProcSysRelread-onlycurrentThis field contains the system release number.
1.3.6.1.4.1.4329.2.51.9.1.1.7ColumnhimSWVerOnProcCountryread-onlycurrentThis field contains the country identifier.
1.3.6.1.4.1.4329.2.51.9.1.1.8ColumnhimSWVerOnProcCountryCoderead-onlycurrentThis field contains the country encoding.
1.3.6.1.4.1.4329.2.51.9.1.1.9ColumnhimSWVerOnProcRevNoread-onlycurrentThis field contains the revision number of the ADP software.
1.3.6.1.4.1.4329.2.51.10NodehimSwPkgVersion
1.3.6.1.4.1.4329.2.51.10.1TablehimSWPkgVerTablenot-accessiblecurrentThis table contains the software versions of the service functions. This data is retrieved using the UNIX command pgkinfo -l.
1.3.6.1.4.1.4329.2.51.10.1.1RowhimSWPkgVerEntrynot-accessiblecurrent
1.3.6.1.4.1.4329.2.51.10.1.1.1ColumnhimSWPkgVerPabxIdread-onlycurrent
1.3.6.1.4.1.4329.2.51.10.1.1.2ColumnhimSWPkgVerPkgAbbrread-onlycurrentThis field contains the abbreviation of the software package.
1.3.6.1.4.1.4329.2.51.10.1.1.3ColumnhimSWPkgVerPkgNameread-onlycurrentThis field contains the name of the software package.
1.3.6.1.4.1.4329.2.51.10.1.1.4ColumnhimSWPkgVerVersionread-onlycurrentThis field contains the version of the software package.
1.3.6.1.4.1.4329.2.51.10.1.1.5ColumnhimSWPkgVerInstAtread-onlycurrentThis field contains the date on which the software package was installed.
1.3.6.1.4.1.4329.2.51.10.1.1.6ColumnhimSWPkgVerStatusread-onlycurrentThis field contains the status of the software package.
1.3.6.1.4.1.4329.2.51.11NodehimSystem
1.3.6.1.4.1.4329.2.51.11.1TablehimSysBasicTablenot-accessiblecurrentThis table complements the information about the HiPath 4000 system that is stored in the hicomSystem branch of the hicom MIB.
1.3.6.1.4.1.4329.2.51.11.1.1RowhimSysBasicEntrynot-accessiblecurrent
1.3.6.1.4.1.4329.2.51.11.1.1.1ColumnhimSysBasicPabxIdread-onlycurrent
1.3.6.1.4.1.4329.2.51.11.1.1.2ColumnhimSysBasicDomainread-onlycurrentThis field contains the name of the domain to which the system is belonging.
1.3.6.1.4.1.4329.2.51.11.1.1.3ColumnhimSysBasicNodeNoread-onlycurrentHiPath node number. This field contains the globally unique number of your own PABX. This has a hierarchical structure containing different levels in Version V…
1.3.6.1.4.1.4329.2.51.11.1.1.4ColumnhimSysBasicLEGKread-onlycurrentThis field tells if the 'LEGK' feature is activated on the system. LEGK is a process within the call processing of HiPath 4000 with the following functions: - …
1.3.6.1.4.1.4329.2.51.11.2TablehimSysLANCardsTablenot-accessiblecurrent
1.3.6.1.4.1.4329.2.51.11.2.1RowhimSysLANCardsEntrynot-accessiblecurrent
1.3.6.1.4.1.4329.2.51.11.2.1.1ColumnhimSysLANCardsPabxIdread-onlycurrent
1.3.6.1.4.1.4329.2.51.11.2.1.2ColumnhimSysLANCardsIPAddrread-onlycurrentUnique IP address within the Customer LAN.
1.3.6.1.4.1.4329.2.51.11.2.1.3ColumnhimSysLANCardsNetMaskread-onlycurrentThe netmask of the LAN card. It depends on the class of the LAN Card address.
1.3.6.1.4.1.4329.2.51.11.2.1.4ColumnhimSysLANCardsBroadCastread-onlycurrentThe broadcast address is used to send a datagram packet to all hosts of a network or subnetwork, e.g. for address propagation from a router. The broadcast addr…
1.3.6.1.4.1.4329.2.51.11.2.1.5ColumnhimSysLANCardsTyperead-onlycurrentType of the LAN card. Possible values are Ethernet and Token Ring.
1.3.6.1.4.1.4329.2.51.11.2.1.6ColumnhimSysLANCardsStatusread-onlycurrentThe status of the configured LAN card. Can be one of the following: - Unknown (no traffic light lit): The LAN Card is configured, but no reboot has been perfor…
1.3.6.1.4.1.4329.2.51.11.3TablehimSysHostsTablenot-accessiblecurrent
1.3.6.1.4.1.4329.2.51.11.3.1RowhimSysHostsEntrynot-accessiblecurrent
1.3.6.1.4.1.4329.2.51.11.3.1.1ColumnhimSysHostsPabxIdread-onlycurrent
1.3.6.1.4.1.4329.2.51.11.3.1.2ColumnhimSysHostsNoread-onlycurrentIndex of the host entry.
1.3.6.1.4.1.4329.2.51.11.3.1.3ColumnhimSysHostsIPAddrread-onlycurrentThe IP address of the host.
1.3.6.1.4.1.4329.2.51.11.3.1.4ColumnhimSysHostsNameread-onlycurrentUnique name of the host.
1.3.6.1.4.1.4329.2.51.11.4NodehimSysWAMLConn
1.3.6.1.4.1.4329.2.51.11.4.1TablehimSysWAMLConnTablenot-accessiblecurrent
1.3.6.1.4.1.4329.2.51.11.4.1.1RowhimSysWAMLConnEntrynot-accessiblecurrent
1.3.6.1.4.1.4329.2.51.11.4.1.1.1ColumnhimSysWAMLConnPabxIdread-onlycurrent
1.3.6.1.4.1.4329.2.51.11.4.1.1.2ColumnhimSysWAMLConnLTGread-onlycurrentLine/trunk group number. Valid values: 1-1
1.3.6.1.4.1.4329.2.51.11.4.1.1.3ColumnhimSysWAMLConnLTUread-onlycurrentLine/trunk unit. Valid values: 1-15, for IP Gateway DSP HW of NCUI STMI STMA WAML 1-99, for RG/ACGEN PER DIU SIUP TMD 17-99, for NCUI STMA WAML
1.3.6.1.4.1.4329.2.51.11.4.1.1.4ColumnhimSysWAMLConnSlotread-onlycurrentSlot number of LTU (Line/Trunk Unit). Valid values: 1-121, for STMI, IP gateway, PER, RG, ACGEN, DIU, SIUP, TMD 1-145, for STMA, WAML
1.3.6.1.4.1.4329.2.51.11.4.1.1.5ColumnhimSysWAMLConnRufNrread-onlycurrentPhone number of the WAML board.
1.3.6.1.4.1.4329.2.51.11.4.1.1.6ColumnhimSysWAMLConnBChlread-onlycurrentNumber of b-channels on the WAML board.
1.3.6.1.4.1.4329.2.51.11.4.1.1.7ColumnhimSysWAMLConnStatusread-onlycurrentStatus of the WAML board.
1.3.6.1.4.1.4329.2.51.11.4.2TablehimSysWAMLConnIPTablenot-accessiblecurrent
1.3.6.1.4.1.4329.2.51.11.4.2.1RowhimSysWAMLConnIPEntrynot-accessiblecurrent
1.3.6.1.4.1.4329.2.51.11.4.2.1.1ColumnhimSysWAMLConnIPPabxIdread-onlycurrent
1.3.6.1.4.1.4329.2.51.11.4.2.1.2ColumnhimSysWAMLConnIPLTGread-onlycurrentLine/trunk group number. Valid values: 1-1
1.3.6.1.4.1.4329.2.51.11.4.2.1.3ColumnhimSysWAMLConnIPLTUread-onlycurrentLine/trunk unit. Valid values: 1-15, for IP Gateway DSP HW of NCUI STMI STMA WAML 1-99, for RG/ACGEN PER DIU SIUP TMD 17-99, for NCUI STMA WAML
1.3.6.1.4.1.4329.2.51.11.4.2.1.4ColumnhimSysWAMLConnIPSlotread-onlycurrentSlot number of LTU (Line/Trunk Unit). Valid values: 1-121, for STMI, IP gateway, PER, RG, ACGEN, DIU, SIUP, TMD 1-145, for STMA, WAML
1.3.6.1.4.1.4329.2.51.11.4.2.1.5ColumnhimSysWAMLConnIPIfNameread-onlycurrentName of the interface.
1.3.6.1.4.1.4329.2.51.11.4.2.1.6ColumnhimSysWAMLConnIPAddrread-onlycurrentIP address of the WAML connection.
1.3.6.1.4.1.4329.2.51.11.4.2.1.7ColumnhimSysWAMLConnIPNetMaskread-onlycurrentNet mask of the WAML connection.
1.3.6.1.4.1.4329.2.51.12NodehimBoards
1.3.6.1.4.1.4329.2.51.12.1TablehimBoardBasicTablenot-accessiblecurrentThis table contains the boards that are managed by CM. It can be viewed as an extension of hicomBCSUTable. Please note that the PEN (LTG, LTU, Slot) of LTU boa…
1.3.6.1.4.1.4329.2.51.12.1.1RowhimBoardBasicEntrynot-accessiblecurrent
1.3.6.1.4.1.4329.2.51.12.1.1.1ColumnhimBoardBasicPabxIdread-onlycurrent
1.3.6.1.4.1.4329.2.51.12.1.1.2ColumnhimBoardBasicLTGread-onlycurrentLine/trunk group number. Valid values: 1-1
1.3.6.1.4.1.4329.2.51.12.1.1.3ColumnhimBoardBasicLTUread-onlycurrentLine/trunk unit. Valid values: 1-15, for IP Gateway DSP HW of NCUI STMI STMA WAML 1-99, for RG/ACGEN PER DIU SIUP TMD 17-99, for NCUI STMA WAML
1.3.6.1.4.1.4329.2.51.12.1.1.4ColumnhimBoardBasicSlotread-onlycurrentSlot number of LTU (Line/Trunk Unit). Valid values: 1-121, for STMI, IP gateway, PER, RG, ACGEN, DIU, SIUP, TMD 1-145, for STMA, WAML
1.3.6.1.4.1.4329.2.51.12.1.1.5ColumnhimBoardBasicFuncIdread-onlycurrentFunction ID Valid values: 0-255 2 for SIU type 2 (MFV) 3 for SIU type 3 (MFC) 4 for SIU - RDS functionality 5 for SIU - ANI signaling 6 for SIU - CIS multifreq…
1.3.6.1.4.1.4329.2.51.12.1.1.6ColumnhimBoardBasicCatread-onlycurrent
1.3.6.1.4.1.4329.2.51.12.1.1.7ColumnhimBoardBasicNameread-onlycurrentName of the setup the board is configured to.
1.3.6.1.4.1.4329.2.51.12.1.1.8ColumnhimBoardBasicVOIPSecread-onlycurrent
1.3.6.1.4.1.4329.2.51.12.1.1.9ColumnhimBoardBasicLWVarread-onlycurrentThe loadware variant. Default value: 0 Valid values: 0-9, A-D
1.3.6.1.4.1.4329.2.51.12.1.1.10ColumnhimBoardBasicNoCircread-onlycurrentNumber of circuits to be configured. Valid values: 1-255
1.3.6.1.4.1.4329.2.51.12.2TablehimBoardIPTablenot-accessiblecurrentThis table contains the IP address configuration of the boards. Please note that not all fields are used for all boards.
1.3.6.1.4.1.4329.2.51.12.2.1RowhimBoardIPEntrynot-accessiblecurrent
1.3.6.1.4.1.4329.2.51.12.2.1.1ColumnhimBoardIPGwyIPAddrread-onlycurrentIP address of the gateway. Valid for: STMI
1.3.6.1.4.1.4329.2.51.12.2.1.2ColumnhimBoardIPSrcIPAddrread-onlycurrentSource IP address of STMI-HFA board. A valid Source IP address must always be specified in order to enable the IP phones to address the system (SWU) Default: 0…
1.3.6.1.4.1.4329.2.51.12.2.1.3ColumnhimBoardIPNetMaskread-onlycurrentIP network mask. Valid for: HFA
1.3.6.1.4.1.4329.2.51.12.2.1.4ColumnhimBoardIPDefRouterread-onlycurrentIP address of the default router within the LAN segment. The default router takes care of routing forward all packets with a destination address with a network…
1.3.6.1.4.1.4329.2.51.12.2.1.5ColumnhimBoardIPCustLANIPread-onlycurrentIP address of customer LAN. Default: 0.0.0.0 Valid for: IGW, SIP
1.3.6.1.4.1.4329.2.51.12.2.1.6ColumnhimBoardIPSTMI2IGWSubMaskread-onlycurrentIP subnet mask of LAN segment. Default: 0.0.0.0 Valid for: IGW, SIP
1.3.6.1.4.1.4329.2.51.12.2.1.7ColumnhimBoardIPDefGWIPread-onlycurrentDefault gateway IP address. Default: 0.0.0.0 Valid for: IGW, SIP
1.3.6.1.4.1.4329.2.51.12.2.1.8ColumnhimBoardIPManStatIPread-onlycurrentIP address of management station. Default: 0.0.0.0 Valid for: IGW, SIP
1.3.6.1.4.1.4329.2.51.12.2.1.9ColumnhimBoardIPManStatPortread-onlycurrentPort number of management station. Valid values: 1024 - 65535 Default: 0 Valid for: IGW, SIP
1.3.6.1.4.1.4329.2.51.12.2.1.10ColumnhimBoardIPBckpServIPread-onlycurrentIP address of backup server. Default: 0.0.0.0 Valid for: IGW, SIP
1.3.6.1.4.1.4329.2.51.12.2.1.11ColumnhimBoardIPBckpServPortread-onlycurrentPort number of backup server. Default: 0 (0 means 'undefined port number') Valid for: IGW, SIP
1.3.6.1.4.1.4329.2.51.12.3TablehimBoardLocTablenot-accessiblecurrentThis table contains the location data of the boards. It is only available for boards of type DSX, LTUCA, LTUCE and LTUCX.
1.3.6.1.4.1.4329.2.51.12.3.1RowhimBoardLocEntrynot-accessiblecurrent
1.3.6.1.4.1.4329.2.51.12.3.1.1ColumnhimBoardLocIdread-onlycurrentDescribes the location of the switch for the system configurator. Valid values: 0-999
1.3.6.1.4.1.4329.2.51.12.3.1.2ColumnhimBoardLocLocread-onlycurrentPostal address of the LTU (Line/Trunk Unit) shelf. Applies to the Local Connection Type. Valid values: text, up to 45 characters
1.3.6.1.4.1.4329.2.51.12.3.1.3ColumnhimBoardLocPhoneNoread-onlycurrentPhone number at the shelf location. Valid values: 0-9, *, #, A-D, up to 22 characters
1.3.6.1.4.1.4329.2.51.12.3.1.4ColumnhimBoardLocFaxNoread-onlycurrentFax number at the shelf location. Valid values: 0-9, *, #, A-D, up to 22 characters
1.3.6.1.4.1.4329.2.51.13NodehimIPDA
1.3.6.1.4.1.4329.2.51.13.1NodehimIPDAGenData
1.3.6.1.4.1.4329.2.51.13.1.1TablehimIPDAGenTablenot-accessiblecurrentGeneral settings that are true for all IPDAs.
1.3.6.1.4.1.4329.2.51.13.1.1.1RowhimIPDAGenEntrynot-accessiblecurrent
1.3.6.1.4.1.4329.2.51.13.1.1.1.1ColumnhimIPDAGenPabxIdread-onlycurrent
1.3.6.1.4.1.4329.2.51.13.1.1.1.2ColumnhimIPDAGenSpeedread-onlycurrentIndicates the bit-rate speed. Valid values: 10 Mbits/s; 100 Mbits/s
1.3.6.1.4.1.4329.2.51.13.1.1.1.3ColumnhimIPDAGenModeread-onlycurrentIndicates the bit-rate mode. Valid values: Full Duplex, Half Duplex
1.3.6.1.4.1.4329.2.51.13.1.1.1.4ColumnhimIPDAGenPayConnread-onlycurrentTOS for VoIP payload connections to APs (CP). Valid values: 0-255
1.3.6.1.4.1.4329.2.51.13.1.1.1.5ColumnhimIPDAGenSigConnread-onlycurrentTOS for signalling connections to APs (FA). Valid values: 0-255
1.3.6.1.4.1.4329.2.51.13.1.2TablehimIPDAGenIPTablenot-accessiblecurrentGeneral IP settings that are true for all IPDAs.
1.3.6.1.4.1.4329.2.51.13.1.2.1RowhimIPDAGenIPEntrynot-accessiblecurrent
1.3.6.1.4.1.4329.2.51.13.1.2.1.1ColumnhimIPDAGenIPNetAddrread-onlycurrentIP net address of HiPath LAN segment.
1.3.6.1.4.1.4329.2.51.13.1.2.1.2ColumnhimIPDAGenIPNetMaskread-onlycurrentIP net mask of HiPath LAN segment.
1.3.6.1.4.1.4329.2.51.13.1.2.1.3ColumnhimIPDAGenIPCCAAddrread-onlycurrentAddress of the CC-A processor within the HiPath LAN segment.
1.3.6.1.4.1.4329.2.51.13.1.2.1.4ColumnhimIPDAGenIPCCBAddrread-onlycurrentAddress of the CC-B processor within the HiPath LAN segment. Default value: 0.0.0.0
1.3.6.1.4.1.4329.2.51.13.1.2.1.5ColumnhimIPDAGenIPDefRoutAddrread-onlycurrentIP address of the default router within the HiPath LAN segment.
1.3.6.1.4.1.4329.2.51.13.1.2.1.6ColumnhimIPDAGenIPSurvNetAddrread-onlycurrentThe IP address of the survivability net. Default value: 0.0.0.0
1.3.6.1.4.1.4329.2.51.13.2NodehimIPDAAPData
1.3.6.1.4.1.4329.2.51.13.2.1TablehimIPDABasicTablenot-accessiblecurrentThis table stores IPDA information from CM.
1.3.6.1.4.1.4329.2.51.13.2.1.1RowhimIPDABasicEntrynot-accessiblecurrent
1.3.6.1.4.1.4329.2.51.13.2.1.1.1ColumnhimIPDABasicPabxIdread-onlycurrent
1.3.6.1.4.1.4329.2.51.13.2.1.1.2ColumnhimIPDABasicLTUread-onlycurrentLine/trunk unit. Valid values: 17-99
1.3.6.1.4.1.4329.2.51.13.2.1.1.3ColumnhimIPDABasicConnTyperead-onlycurrent
1.3.6.1.4.1.4329.2.51.13.2.1.1.4ColumnhimIPDABasicBChanNoread-onlycurrentAmount of B-Channels. Valid values: 1- 120
1.3.6.1.4.1.4329.2.51.13.2.1.1.5ColumnhimIPDABasicConvAMLawread-onlycurrent
1.3.6.1.4.1.4329.2.51.13.2.2TablehimIPDAIPTablenot-accessiblecurrentThis table contains the IP address configuration of the IPDAs.
1.3.6.1.4.1.4329.2.51.13.2.2.1RowhimIPDAIPEntrynot-accessiblecurrent
1.3.6.1.4.1.4329.2.51.13.2.2.1.1ColumnhimIPDAIPAccPtAddrread-onlycurrentIP address of the access point in the AP network.
1.3.6.1.4.1.4329.2.51.13.2.2.1.2ColumnhimIPDAIPTAccPtAddrread-onlycurrentIP address for the TAP/Service PC link at the access point. This IP address must be in the same network as the access point in the AP network.
1.3.6.1.4.1.4329.2.51.13.2.2.1.3ColumnhimIPDAIPAccPtRoutAddrread-onlycurrentIP address of the gateway (IP address of the router in the AP network).
1.3.6.1.4.1.4329.2.51.13.2.2.1.4ColumnhimIPDAIPNetMaskNWread-onlycurrentNetmask of the network to which the respective Access Point in AP network belongs.
1.3.6.1.4.1.4329.2.51.13.2.2.1.5ColumnhimIPDAIPAccPtPriRoutAddrread-onlycurrentIP address of the primary signalling router for NCUI board (IP address of the router in the HiPath 4000 LAN segment). Required if the connection type is APDL.
1.3.6.1.4.1.4329.2.51.13.2.2.1.6ColumnhimIPDAIPNetMaskDLread-onlycurrentNetmask of the network to which the Access Point in AP internal network belongs.
1.3.6.1.4.1.4329.2.51.13.2.3TablehimIPDALocTablenot-accessiblecurrentThis table contains the location data of the boards. It is only available for boards of type DSX, LTUCA, LTUCE and LTUCX.
1.3.6.1.4.1.4329.2.51.13.2.3.1RowhimIPDALocEntrynot-accessiblecurrent
1.3.6.1.4.1.4329.2.51.13.2.3.1.1ColumnhimIPDALocIdread-onlycurrentDescribes the location of the switch for the system configurator. Valid values: 0-999
1.3.6.1.4.1.4329.2.51.13.2.3.1.2ColumnhimIPDALocLocread-onlycurrentPostal address of the LTU (Line/Trunk Unit) shelf. Applies to the Local Connection Type. Valid values: text, up to 45 characters
1.3.6.1.4.1.4329.2.51.13.2.3.1.3ColumnhimIPDALocPhoneNoread-onlycurrentPhone number at the shelf location. Valid values: 0-9, *, #, A-D, up to 22 characters
1.3.6.1.4.1.4329.2.51.13.2.3.1.4ColumnhimIPDALocFaxNoread-onlycurrentFax number at the shelf location. Valid values: 0-9, *, #, A-D, up to 22 characters
1.3.6.1.4.1.4329.2.51.14NodehimInfo
1.3.6.1.4.1.4329.2.51.14.1ScalarhimSubagentLastMsgNoread-onlycurrentThe last message, warning or error number issued by the Him subagent.
1.3.6.1.4.1.4329.2.51.14.2ScalarhimSubagentLastMsgTextread-onlycurrentThe last message, warning or error text issued by the Him subagent.
1.3.6.1.4.1.4329.2.51.14.3ScalarhimResultDataread-writecurrentIs used for agent internal communication. Contains the PabxId of a Hicom for which the last discovery process was conveyed. Is SET by the discovery agent and i…
1.3.6.1.4.1.4329.2.51.15NodehimDiscovery
1.3.6.1.4.1.4329.2.51.15.1ScalarhimChangesread-onlycurrentIndicates the number of finished HIM discoveries - corresponds to the number of hicomHWDiscovXXX traps sent out.
1.3.6.1.4.1.4329.2.51.15.2TablehimDiscovTablenot-accessiblecurrentThe table describing the status concerning discovery of HIM information.
1.3.6.1.4.1.4329.2.51.15.2.1RowhimDiscovEntrynot-accessiblecurrentThe entry describes the status of the discovery process. It is designed to comply with the structure of discovery entries in the hicom MIB, even though data is…
1.3.6.1.4.1.4329.2.51.15.2.1.1ColumnhimDiscovPabxIdread-onlycurrentUnique identifier of the Hicom being discovered.
1.3.6.1.4.1.4329.2.51.15.2.1.2ColumnhimDiscovPabxMnemonicread-onlycurrentName of the Hicom system.
1.3.6.1.4.1.4329.2.51.15.2.1.3ColumnhimDiscovStatusread-writecurrentStatus of discovery process. A managment station may initiate a discovery by setting this variable to value busy. The other values are set by the agent.
1.3.6.1.4.1.4329.2.51.15.2.1.4ColumnhimDiscovModeread-writecurrentMode of discovery process.
1.3.6.1.4.1.4329.2.51.15.2.1.5ColumnhimDiscovTimDatread-onlycurrentDate and time (year, month, day, hour, minute, second) the last successful discovery action was performed for the Hicom.
1.3.6.1.4.1.4329.2.51.15.2.1.6ColumnhimDiscovErrTimDatread-onlycurrentDate and time (year, month, day, hour, minute, second) the last failed discovery action was performed for the Hicom.
1.3.6.1.4.1.4329.2.51.20NodehimMibConformance
1.3.6.1.4.1.4329.2.51.20.1NodehimMibGroups
1.3.6.1.4.1.4329.2.51.20.1.1GrouphimWelcomePageGroupcurrent
1.3.6.1.4.1.4329.2.51.20.1.2GrouphimSwitchDataGroupcurrent
1.3.6.1.4.1.4329.2.51.20.1.3GrouphimSpecGroupcurrent
1.3.6.1.4.1.4329.2.51.20.1.4GrouphimSWUPeripheryGroupcurrent
1.3.6.1.4.1.4329.2.51.20.1.5GrouphimCentralSwitchGroupcurrent
1.3.6.1.4.1.4329.2.51.20.1.6GrouphimGeneralSwitchGroupcurrent
1.3.6.1.4.1.4329.2.51.20.1.7GrouphimFeaturesGroupcurrent
1.3.6.1.4.1.4329.2.51.20.1.8GrouphimAPSPatchesGroupcurrent
1.3.6.1.4.1.4329.2.51.20.1.9GrouphimSWVersionGroupcurrent
1.3.6.1.4.1.4329.2.51.20.1.10GrouphimSWPkgVersionGroupcurrent
1.3.6.1.4.1.4329.2.51.20.1.11GrouphimSystemGroupcurrent
1.3.6.1.4.1.4329.2.51.20.1.12GrouphimBoardsGroupcurrent
1.3.6.1.4.1.4329.2.51.20.1.13GrouphimIPDAGroupcurrent
1.3.6.1.4.1.4329.2.51.20.1.14GrouphimInfoGroupcurrent
1.3.6.1.4.1.4329.2.51.20.1.15GrouphimDiscoveryGroupcurrent
1.3.6.1.4.1.4329.2.51.20.1.16GrouphimTrapsGroupcurrent
1.3.6.1.4.1.4329.2.51.21NodehimTrapGroup
1.3.6.1.4.1.4329.2.51.21.1NodehimTrapVariables
1.3.6.1.4.1.4329.2.51.21.1.1ScalarhimTrapPabxIdnot-accessiblecurrentUnique identifier of a Hicom system.
1.3.6.1.4.1.4329.2.51.21.1.2ScalarhimTrapPabxMnemonicnot-accessiblecurrentMnemonic name of the Hicom system.
1.3.6.1.4.1.4329.2.51.21.2NodehimTraps
1.3.6.1.4.1.4329.2.51.21.2.0NotificationinternalMessageHimSubagentcurrentAn internalMessage trap contains an informational message generated by the subagent.
1.3.6.1.4.1.4329.2.51.21.2.1NotificationinternalWarningHimSubagentcurrentAn internalWarning trap contains a warning message generated by a subagent.
1.3.6.1.4.1.4329.2.51.21.2.2NotificationinternalErrorHimSubagentcurrentAn internalError trap contains an error message generated by a subagent. After issuing this trap, the agent terminates.
1.3.6.1.4.1.4329.2.51.21.2.10NotificationhimDiscovSucccurrentA himDiscovSucc trap indicates the successful termination of a discovery process.
1.3.6.1.4.1.4329.2.51.21.2.11NotificationhimDiscovErrcurrentA himDiscovErr trap signifies the unsuccessful termination of a discovery process.
1.3.6.1.4.1.4329.2.51.21.2.19NotificationhimDiscovBusycurrentA himDiscovBusy trap signifies that a sw discovery process is running.
Type Definitions
NameSyntaxStatusDescription
DiscoveryModesINTEGER { man(1), auto(2), undef(9) }
DiscoveryStatesINTEGER { done(1), error(2), busy(3), finok(4), finerr(5), kill(6) }
HimPabxIdInteger32 (1..2147483647)currentTextual convention for the Pabx Id.
HimPENOCTET STRING (SIZE (0..9))currentOctet String for storing PEN numbers. The format is The PEN is displayed in the following format: [LTG]-[LTU]-[EBT]. LTG: Line/Trunk Group: always 1 LTU: Line/Trunk Unit: a number between 1 and 99 EBT: a three-digit num…
HimPhoneNumberOCTET STRING (SIZE (0..22))currentConvention that represents phone numbers in a HiPath system.
HimShelfNWTypeINTEGER { flex(1), local(2), apnw(3), apdl(4), other(0) }currentNetwork type of the shelf.
HimSwitchNumberOCTET STRING (SIZE (0..17))currentData type of the switch number.
HimYesNoINTEGER { yes(1), no(2), other(0) } DiscoveryStates ::= INTEGER { done(1), error(2), busy(3), finok(4), finerr(5), kill(6) } DiscoveryModes ::= INTEGER { man(1), auto(2), undef(9) }currentBoolean data type: 1. no 2. yes The order is set like this to comply with the definition of data leaves in the hicom MIB that use this convention implicitly.