SK-UPPS-MIB
96 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC1155-SMI | Counter DisplayString enterprises Gauge OBJECT-TYPE TimeTicks |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.179 | Nodesk | |||
| 1.3.6.1.4.1.179.2 | NodeskMibs | |||
| 1.3.6.1.4.1.179.2.2 | Nodesk-board | |||
| 1.3.6.1.4.1.179.2.2.1 | Nodesk-board-status | |||
| 1.3.6.1.4.1.179.2.2.1.1 | TablestTable | not-accessible | mandatory | A list of board status entries. |
| 1.3.6.1.4.1.179.2.2.1.1.1 | RowstEntry | not-accessible | mandatory | A board status entry containing information common to a given board. |
| 1.3.6.1.4.1.179.2.2.1.1.1.1 | ColumnstIfIndex | read-only | mandatory | The ifIndex of the corresponding entry in the ifTable. |
| 1.3.6.1.4.1.179.2.2.1.1.1.2 | ColumnstVersion | read-only | mandatory | VersionNr. of the DLI |
| 1.3.6.1.4.1.179.2.2.1.1.1.3 | ColumnstLogAddress | read-only | mandatory | This is the adapter's current logical node address. In normal case this address is equal to the value of PHYSADDR. If the DLI wants to change the logical addre… |
| 1.3.6.1.4.1.179.2.2.1.1.1.4 | ColumnstInterrupt | read-only | mandatory | This is the IRQ line used by the adapter (-1 if none). |
| 1.3.6.1.4.1.179.2.2.1.1.1.5 | ColumnstBaseAddress | read-only | mandatory | This is the segment address (base) at which the adapter's RAM is located in the address space of the PC (0 if adapter has no shared memory). |
| 1.3.6.1.4.1.179.2.2.1.1.1.6 | ColumnstRAMSize | read-only | mandatory | This is the size in bytes of the shared memory on the adapter. |
| 1.3.6.1.4.1.179.2.2.1.1.1.7 | ColumnstIOPort | read-only | mandatory | This is the first I/O port address (base) used by the adapter (0 if none). |
| 1.3.6.1.4.1.179.2.2.1.1.1.8 | ColumnstDMALine | read-only | mandatory | This is the DMA channel number used by the adapter (-1 if none). |
| 1.3.6.1.4.1.179.2.2.1.1.1.9 | ColumnstNumMbufs | read-only | mandatory | This is the total number of all Mbufs. Mbuf is a data structure in the DLI whichs includes the necessary information to coordinate the interaction of various f… |
| 1.3.6.1.4.1.179.2.2.1.1.1.10 | ColumnstMaxTxMbufs | read-only | mandatory | This is the maximum number of Mbufs that may be allocated by the protocol clients |
| 1.3.6.1.4.1.179.2.2.1.1.1.11 | ColumnstMaxRxMbufs | read-only | mandatory | The number of Mbufs destined for packet reception can be calculated as NumMbufs - MaxTXMbufs. |
| 1.3.6.1.4.1.179.2.2.1.1.1.12 | ColumnstCurrentPacketFilter | read-only | mandatory | This variable is a value representing the address types that are received by the driver. Default is O. Then, for each address type A, with the value 1 - 4, the… |
| 1.3.6.1.4.1.179.2.2.1.1.1.13 | ColumnstServiceInterrupt | read-only | mandatory | This is the service interrupt occupied by UPPSDLI. It can be set at start of the DLI (default:0x7c). |
| 1.3.6.1.4.1.179.2.2.1.1.1.14 | ColumnstOEMSignature | read-only | mandatory | OEM-Signature |
| 1.3.6.1.4.1.179.2.2.1.1.1.15 | ColumnstTopology | read-only | mandatory | This field holds the network topology id. Topology ids are assigned by Schneider & Koch. The following topology ids have been defined: ID Topology === ========… |
| 1.3.6.1.4.1.179.2.2.1.1.1.16 | ColumnstIORange | read-only | mandatory | Specifies the number of I/O ports following the I/O port base. |
| 1.3.6.1.4.1.179.2.2.2 | Nodesk-board-client | |||
| 1.3.6.1.4.1.179.2.2.2.1 | TableclTable | not-accessible | mandatory | A list of clients. |
| 1.3.6.1.4.1.179.2.2.2.1.1 | RowclEntry | not-accessible | mandatory | A client entry containing information common to a given client. |
| 1.3.6.1.4.1.179.2.2.2.1.1.1 | ColumnclIfIndex | read-only | mandatory | The corresponding ifIndex of the given client. |
| 1.3.6.1.4.1.179.2.2.2.1.1.2 | ColumnclType | read-only | mandatory | This object represents the protocol type to be opened. The protocol types are the following: Mode (PMODE) TYPE Protocol =========== =============== ===========… |
| 1.3.6.1.4.1.179.2.2.2.1.1.3 | ColumnclMulticast | read-only | mandatory | This is the number of multicast addresses tered registered by the protocol. |
| 1.3.6.1.4.1.179.2.2.2.1.1.4 | ColumnclName | read-only | mandatory | This is a character chain that characterizes the protocol/application. |
| 1.3.6.1.4.1.179.2.2.2.1.1.5 | ColumnclMode | read-only | mandatory | This value represents the mode of the registered protocol (cf. UPPS Developers Kit) |
| 1.3.6.1.4.1.179.2.2.2.1.1.6 | ColumnclPID | read-only | mandatory | This value represents a virtual board number to identify a protocol |
| 1.3.6.1.4.1.179.2.2.3 | Nodeeth | |||
| 1.3.6.1.4.1.179.2.2.3.1 | TableethStatsTable | not-accessible | mandatory | Statistics for a collection of ethernet-like interfaces attached to a particular system. |
| 1.3.6.1.4.1.179.2.2.3.1.1 | RowethStatsEntry | not-accessible | mandatory | Statistics for a particular interface to an ethernet-like medium. |
| 1.3.6.1.4.1.179.2.2.3.1.1.1 | ColumnethStatsIndex | read-only | mandatory | An index value that uniquely identifies an interface to an ethernet-like medium. The interface identified by a particular value of this index is the same inter… |
| 1.3.6.1.4.1.179.2.2.3.1.1.2 | ColumnethStatsAlignmentErrors | read-only | mandatory | A count of frames received on a particular interface that are not an integral number of octets in length and do not pass the FCS check. The count represented b… |
| 1.3.6.1.4.1.179.2.2.3.1.1.3 | ColumnethStatsFCSErrors | read-only | mandatory | A count of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS check. The count represented by an… |
| 1.3.6.1.4.1.179.2.2.3.1.1.4 | ColumnethStatsSingleCollisionFrames | read-only | mandatory | A count of successfully transmitted frames on a particular interface for which transmission is inhibited by exactly one collision. A frame that is counted by a… |
| 1.3.6.1.4.1.179.2.2.3.1.1.5 | ColumnethStatsMultipleCollisionFrames | read-only | mandatory | A count of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one collision. A frame that is counted by… |
| 1.3.6.1.4.1.179.2.2.3.1.1.6 | ColumnethStatsSQETestErrors | read-only | mandatory | A count of times that the SQE TEST ERROR message is generated by the PLS sublayer for a particular interface. this object is not supported |
| 1.3.6.1.4.1.179.2.2.3.1.1.7 | ColumnethStatsDeferredTransmissions | read-only | mandatory | A count of frames for which the first transmission attempt on a particular interface is delayed because the medium is busy. The count represented by an instanc… |
| 1.3.6.1.4.1.179.2.2.3.1.1.8 | ColumnethStatsLateCollisions | read-only | mandatory | The number of times that a collision is detected on a particular interface later than 512 bit-times into the transmission of a packet. Five hundred and twelve … |
| 1.3.6.1.4.1.179.2.2.3.1.1.9 | ColumnethStatsExcessiveCollisions | read-only | mandatory | A count of frames for which transmission on a particular interface fails due to excessive collisions. |
| 1.3.6.1.4.1.179.2.2.3.1.1.10 | ColumnethStatsInternalMacTransErrors | read-only | mandatory | A count of frames for which transmission on a particular interface fails due to an internal MAC sublayer transmit error. A frame is only counted by an instance… |
| 1.3.6.1.4.1.179.2.2.3.1.1.11 | ColumnethStatsCarrierSenseErrors | read-only | mandatory | The number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame on a particular interface. The count repres… |
| 1.3.6.1.4.1.179.2.2.3.1.1.12 | ColumnethStatsExcessiveDeferrals | read-only | mandatory | A count of frames for which transmission on a particular interface is deferred for an excessive period of time. |
| 1.3.6.1.4.1.179.2.2.3.1.1.13 | ColumnethStatsFrameTooLongs | read-only | mandatory | A count of frames received on a particular interface that exceed the maximum permitted frame size. The count represented by an instance of this object is incre… |
| 1.3.6.1.4.1.179.2.2.3.1.1.14 | ColumnethStatsInRangeLengthErrors | read-only | mandatory | A count of frames received on a particular interface with a length field value that falls between the minimum unpadded LLC data size and the maximum allowed LL… |
| 1.3.6.1.4.1.179.2.2.3.1.1.15 | ColumnethStatsOutOfRangeLengthFields | read-only | mandatory | A count of frames received on a particular interface for which the length field value exceeds the maximum allowed LLC data size. The count represented by an in… |
| 1.3.6.1.4.1.179.2.2.3.1.1.16 | ColumnethStatsInternalMacRecvErrors | read-only | mandatory | A count of frames for which reception on a particular interface fails due to an internal MAC sublayer receive error. A frame is only counted by an instance of … |
| 1.3.6.1.4.1.179.2.2.4 | Nodetok | |||
| 1.3.6.1.4.1.179.2.2.4.1 | TabletokStatsTable | not-accessible | mandatory | Statistics for a collection of token-ring interfaces attached to a particular system. |
| 1.3.6.1.4.1.179.2.2.4.1.1 | RowtokStatsEntry | not-accessible | mandatory | Statistics for a particular interface for Token Ring. |
| 1.3.6.1.4.1.179.2.2.4.1.1.1 | ColumntokStatsIndex | read-only | mandatory | An index value that uniquely identifies an interface to a token-ring medium. The interface identified by a particular value of this index is the same interface… |
| 1.3.6.1.4.1.179.2.2.4.1.1.2 | ColumntokStatsUpstreamNbr | read-only | mandatory | The MAC's upstream neighbour's long individual MAC address. |
| 1.3.6.1.4.1.179.2.2.4.1.1.3 | ColumntokStatsLocalRingNumber | read-only | mandatory | The unique number of the local Token Ring |
| 1.3.6.1.4.1.179.2.2.4.1.1.4 | ColumntokStatsRingUpCounts | read-only | mandatory | The number of times the station made sucessfully an 'open adapter' |
| 1.3.6.1.4.1.179.2.2.4.1.1.5 | ColumntokStatsSignalLossErrors | read-only | mandatory | The number of times the adapter detected a loss of signal on the ring |
| 1.3.6.1.4.1.179.2.2.4.1.1.6 | ColumntokStatsLobeWireFaults | read-only | mandatory | The number of times the adapter detected an open or short circuit in the cable between the adapter and the wiring concentrator. |
| 1.3.6.1.4.1.179.2.2.4.1.1.7 | ColumntokStatsRingRecoveryCounts | read-only | mandatory | The number of times the adapter observes claim token MAC frames on the ring. The adapter may be transmitting the claim token frames. |
| 1.3.6.1.4.1.179.2.2.4.1.1.8 | ColumntokStatsLineErrors | read-only | mandatory | The line error counter is incremented whenever 1) a frame is repeated or copied, and 2) the error detected indicator is zero in the incoming frame, and 3) at l… |
| 1.3.6.1.4.1.179.2.2.4.1.1.9 | ColumntokStatsBurstErrors | read-only | mandatory | The burst error counter is contained in all adapter configurations and is incremented when the adapter detects the absence of transitions for five half- bit ti… |
| 1.3.6.1.4.1.179.2.2.4.1.1.10 | ColumntokStatsARI-FCIErrors | read-only | mandatory | The ARI/FCI error counter is incremented when an adapter receives an Active Monitor Present (AMP)MAC frame with the ARI/FCI bits equal to zero and a Standby Mo… |
| 1.3.6.1.4.1.179.2.2.4.1.1.11 | ColumntokStatsLostFrameErrors | read-only | mandatory | The lost frame error counter is incremented when an adapter is in transmit (stripping) mode and fails to receive the end of the frame transmitted. |
| 1.3.6.1.4.1.179.2.2.4.1.1.12 | ColumntokStatsReceiveCongestionErrors | read-only | mandatory | The receive congestion error counter is incremented when an adapter in the repeat mode recognizes a frame addressed to it but has no buffer available to copy t… |
| 1.3.6.1.4.1.179.2.2.4.1.1.13 | ColumntokStatsFrameCopiedErrors | read-only | mandatory | The frame copied error counter is incremented when an adapter in the repeat/receive mode recognizes a frame addressed to its specific address but finds the ARI… |
| 1.3.6.1.4.1.179.2.2.4.1.1.14 | ColumntokStatsTokenErrors | read-only | mandatory | The token error is active only in the active monitor station. It is incremented when the active monitor detects an error with the token protocol as follows: 1)… |
| 1.3.6.1.4.1.179.2.2.4.1.1.15 | ColumntokStatsDMABusErrors | read-only | mandatory | The DMA bus error counter counts the occurrences of DMA bus errors that do not exceed the abort thresholds as specified in the Initialization parameters. |
| 1.3.6.1.4.1.179.2.2.4.1.1.16 | ColumntokStatsDMAParityErrors | read-only | mandatory | The DMA parity error counter counts the occurrences of DMA parity errors that do not exceed the abort thresholds as specified in the Initialization parameters. |
| 1.3.6.1.4.1.179.2.2.4.1.1.17 | ColumntokStatsReceiveOverflowErrors | read-only | mandatory | The Receive Overflow error counter counts the occurrences of packets which do not fit in one DLI Mbuf ( > 4504 Bytes). |
| 1.3.6.1.4.1.179.2.2.5 | Nodefddi | |||
| 1.3.6.1.4.1.179.2.2.5.1 | TablefddiStatsTable | not-accessible | mandatory | Statistics for a collection of fddi interfaces attached to a particular system. |
| 1.3.6.1.4.1.179.2.2.5.1.1 | RowfddiStatsEntry | not-accessible | mandatory | Statistics for a particular interface to a fddi medium. |
| 1.3.6.1.4.1.179.2.2.5.1.1.1 | ColumnfddiStatsIndex | read-only | mandatory | An index value that uniquely identifies an interface to an fddi medium. The interface identified by a particular value of this index is the same interface as i… |
| 1.3.6.1.4.1.179.2.2.5.1.1.2 | ColumnfddiSMTOpVersionId | read-only | mandatory | The version that this station is using for its operation (refer to ANSI 7.1.2.2). |
| 1.3.6.1.4.1.179.2.2.5.1.1.3 | ColumnfddiSMTCFState | read-only | mandatory | The attachment configuration for the station or concentrator (refer to ANSI SMT 9.7.4.3). The following values are possible: cf0(0), cf1(1), cf2(2), cf3(3), cf… |
| 1.3.6.1.4.1.179.2.2.5.1.1.4 | ColumnfddiSMTFrameSends | read-only | mandatory | The number of SMT frames sent |
| 1.3.6.1.4.1.179.2.2.5.1.1.5 | ColumnfddiSMTFrameReceives | read-only | mandatory | The number of SMT frames received |
| 1.3.6.1.4.1.179.2.2.5.1.1.6 | ColumnfddiSMTRingUps | read-only | mandatory | The number of times the Ring came up |
| 1.3.6.1.4.1.179.2.2.5.1.1.7 | ColumnfddiMACUpstreamNbr | read-only | mandatory | The MAC's upstream neighbor's long individual MAC address. It may be determined by the Neighbor Information Frame protocol (refer to ANSI SMT 7.2.1). The value… |
| 1.3.6.1.4.1.179.2.2.5.1.1.8 | ColumnfddiMACDownstreamNbr | read-only | mandatory | The MAC's downstream neighbor's long individual MAC address. It may be determined by the Neighbor Information Frame protocol (refer to ANSI SMT 7.2.1). The val… |
| 1.3.6.1.4.1.179.2.2.5.1.1.9 | ColumnfddiMACFrameCts | read-only | mandatory | Frame_Counter (refer to ANSI MAC 2.2.1). |
| 1.3.6.1.4.1.179.2.2.5.1.1.10 | ColumnfddiMACErrorCts | read-only | mandatory | Error_Counter (refer to ANSI MAC 2.2.1). |
| 1.3.6.1.4.1.179.2.2.5.1.1.11 | ColumnfddiMACLostCts | read-only | mandatory | Lost_Counter (refer to ANSI MAC 2.2.1). |
| 1.3.6.1.4.1.179.2.2.5.1.1.12 | ColumnfddiPORT1LerEstimate | read-only | mandatory | A long term average link error rate of Port 1. It ranges from 10**-4 to 10**-15 and is reported as the absolute value of the exponent of the estimate. |
| 1.3.6.1.4.1.179.2.2.5.1.1.13 | ColumnfddiPORT2LerEstimate | read-only | mandatory | A long term average link error rate of Port2. It ranges from 10**-4 to 10**-15 and is reported as the absolute value of the exponent of the estimate. Returns N… |
| 1.3.6.1.4.1.179.2.2.5.1.1.14 | ColumnfddiATTACHMENTClass | read-only | mandatory | The Attachment class. This represents a PORT or a pair of PORTs plus the associated optional optical bypass that are managed as a functional unit. The PORT ass… |
| 1.3.6.1.4.1.179.2.2.5.1.1.15 | ColumnfddiATTACHOptBypassPresent | read-only | mandatory | The value of this object is false for 'single- attachment'. Correct operation of CMT for single-attachment and concentrator attachments requires that a bypass … |
| 1.3.6.1.4.1.179.2.2.6 | Nodesk-board-statistics | |||
| 1.3.6.1.4.1.179.2.2.6.1 | TablestatsTable | not-accessible | mandatory | A list of board statistic entries. |
| 1.3.6.1.4.1.179.2.2.6.1.1 | RowstatsEntry | not-accessible | mandatory | A board statistic entry containing information common to a given board. |
| 1.3.6.1.4.1.179.2.2.6.1.1.1 | ColumnstatsIfIndex | read-only | mandatory | The ifIndex of the corresponding entry in the ifTable. |
| 1.3.6.1.4.1.179.2.2.6.1.1.2 | ColumnstatsFCSErrors | read-only | mandatory | The number of frames received with a Cyclic Redundancy Check error. This counter is incremented by the template part of the DLI not by the hardware driver as i… |
| 1.3.6.1.4.1.179.2.2.6.1.1.3 | ColumnstatsAlignmentErrors | read-only | mandatory | The number of frames received, which did not end on a byte boundery. This counter is incremented by the template part of the DLI not by the hardware driver as … |
| 1.3.6.1.4.1.179.2.2.6.1.1.4 | ColumnstatsFrameTooLongs | read-only | mandatory | The number of frames received which were to long to fit in the data area of the Mbuf. This counter is incremented by the template part of the DLI not by the ha… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| FddiMACLongAddressType | OCTET STRING (SIZE (6)) |