SLP1-MIB
92 objects
This is the MIB module for the SecureLinx Power Manager.
Imported Objects
| SNMPv2-SMI | enterprises MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.244 | Nodelantronix | |||
| 1.3.6.1.4.1.244.1 | Nodeproducts | |||
| 1.3.6.1.4.1.244.1.9 | Nodeslp | |||
| 1.3.6.1.4.1.244.1.9.1 | Identityslp1 | This is the MIB module for the SecureLinx Power Manager. | ||
| 1.3.6.1.4.1.244.1.9.1.1 | Nodeslp1SystemGroup | |||
| 1.3.6.1.4.1.244.1.9.1.1.1 | Scalarslp1SystemVersion | read-only | current | The firmware version of the system. |
| 1.3.6.1.4.1.244.1.9.1.1.2 | Scalarslp1SystemNICSerialNumber | read-only | current | The serial number of the network interface card in the system. |
| 1.3.6.1.4.1.244.1.9.1.1.3 | Scalarslp1SystemLocation | read-write | current | The location of the system. |
| 1.3.6.1.4.1.244.1.9.1.1.4 | Scalarslp1SystemTowerCount | read-only | current | The number of towers in the system. |
| 1.3.6.1.4.1.244.1.9.1.1.5 | Scalarslp1SystemEnvMonCount | read-only | current | The number of environmental monitors in the system. |
| 1.3.6.1.4.1.244.1.9.1.2 | Nodeslp1SystemTables | |||
| 1.3.6.1.4.1.244.1.9.1.2.1 | Tableslp1TowerTable | not-accessible | current | A table of towers. |
| 1.3.6.1.4.1.244.1.9.1.2.1.1 | Rowslp1TowerEntry | not-accessible | current | Row definition for the tower table. |
| 1.3.6.1.4.1.244.1.9.1.2.1.1.1 | Columnslp1TowerIndex | not-accessible | current | Index for the tower table. |
| 1.3.6.1.4.1.244.1.9.1.2.1.1.2 | Columnslp1TowerID | read-only | current | The ID of the tower. |
| 1.3.6.1.4.1.244.1.9.1.2.1.1.3 | Columnslp1TowerName | read-write | current | The name of the tower. |
| 1.3.6.1.4.1.244.1.9.1.2.1.1.4 | Columnslp1TowerStatus | read-only | current | The operational status of the tower. |
| 1.3.6.1.4.1.244.1.9.1.2.1.1.5 | Columnslp1TowerInfeedCount | read-only | current | The number of input feeds on the tower. |
| 1.3.6.1.4.1.244.1.9.1.2.2 | Tableslp1InfeedTable | not-accessible | current | A table of input feeds. |
| 1.3.6.1.4.1.244.1.9.1.2.2.1 | Rowslp1InfeedEntry | not-accessible | current | Row definition for the input feed table. |
| 1.3.6.1.4.1.244.1.9.1.2.2.1.1 | Columnslp1InfeedIndex | not-accessible | current | Index for the input feed table. |
| 1.3.6.1.4.1.244.1.9.1.2.2.1.2 | Columnslp1InfeedID | read-only | current | The ID of the input feed. |
| 1.3.6.1.4.1.244.1.9.1.2.2.1.3 | Columnslp1InfeedName | read-write | current | The name of the input feed. |
| 1.3.6.1.4.1.244.1.9.1.2.2.1.4 | Columnslp1InfeedCapabilities | read-only | current | The capabilities of the input feed. |
| 1.3.6.1.4.1.244.1.9.1.2.2.1.5 | Columnslp1InfeedStatus | read-only | current | The status of the input feed. If the slp1InfeedCapabilities 'onSense' bit is TRUE, then all of the states are supported and indicate the sensed state of the in… |
| 1.3.6.1.4.1.244.1.9.1.2.2.1.6 | Columnslp1InfeedLoadStatus | read-only | current | The status of the load measured on the input feed. If the slp1InfeedCapabilities 'loadSense' bit is TRUE, then all of the states are supported. If the slp1Infe… |
| 1.3.6.1.4.1.244.1.9.1.2.2.1.7 | Columnslp1InfeedLoadValue | read-only | current | The load measured on the input feed. A non-negative value indicates the measured load in hundredths of Amps. A negative value indicates that a load value was n… |
| 1.3.6.1.4.1.244.1.9.1.2.2.1.8 | Columnslp1InfeedLoadHighThresh | read-write | current | The load high threshold value of the input feed in Amps. |
| 1.3.6.1.4.1.244.1.9.1.2.2.1.9 | Columnslp1InfeedOutletCount | read-only | current | The number of outlets on the input feed. |
| 1.3.6.1.4.1.244.1.9.1.2.3 | Tableslp1OutletTable | not-accessible | current | A table of outlets. |
| 1.3.6.1.4.1.244.1.9.1.2.3.1 | Rowslp1OutletEntry | not-accessible | current | Row definition for the outlet table. |
| 1.3.6.1.4.1.244.1.9.1.2.3.1.1 | Columnslp1OutletIndex | not-accessible | current | Index for the outlet table. |
| 1.3.6.1.4.1.244.1.9.1.2.3.1.2 | Columnslp1OutletID | read-only | current | The ID of the outlet. |
| 1.3.6.1.4.1.244.1.9.1.2.3.1.3 | Columnslp1OutletName | read-write | current | The name of the outlet. |
| 1.3.6.1.4.1.244.1.9.1.2.3.1.4 | Columnslp1OutletCapabilities | read-only | current | The capabilities of the outlet. |
| 1.3.6.1.4.1.244.1.9.1.2.3.1.5 | Columnslp1OutletStatus | read-only | current | The status of the outlet. If the slp1OutletCapabilities 'onSense' bit is TRUE, then all of the states are supported and indicate the sensed state of the outlet… |
| 1.3.6.1.4.1.244.1.9.1.2.3.1.6 | Columnslp1OutletLoadStatus | read-only | current | The status of the load measured on the outlet. If the slp1OutletCapabilities 'loadSense' bit is TRUE, then all of the states are supported. If the slp1OutletCa… |
| 1.3.6.1.4.1.244.1.9.1.2.3.1.7 | Columnslp1OutletLoadValue | read-only | current | The load measured on the outlet. A non-negative value indicates the measured load in hundredths of Amps. A negative value indicates that a load value was not a… |
| 1.3.6.1.4.1.244.1.9.1.2.3.1.8 | Columnslp1OutletLoadLowThresh | read-write | current | The load low threshold value of the outlet in Amps. |
| 1.3.6.1.4.1.244.1.9.1.2.3.1.9 | Columnslp1OutletLoadHighThresh | read-write | current | The load high threshold value of the outlet in Amps. |
| 1.3.6.1.4.1.244.1.9.1.2.3.1.10 | Columnslp1OutletControlState | read-only | current | The control state of the outlet. The supported states are dependent upon the slp1OutletCapabilities 'powerControl' and 'shutdown' bits, as well as the supporte… |
| 1.3.6.1.4.1.244.1.9.1.2.3.1.11 | Columnslp1OutletControlAction | read-write | current | An action to change the control state of the outlet. If the slp1OutletCapabilities 'powerControl' bit is TRUE, then the 'on', 'off', and 'reboot' actions can b… |
| 1.3.6.1.4.1.244.1.9.1.2.4 | Tableslp1EnvMonTable | not-accessible | current | A table of environmental monitors. |
| 1.3.6.1.4.1.244.1.9.1.2.4.1 | Rowslp1EnvMonEntry | not-accessible | current | Row definition for the environmental monitor table. |
| 1.3.6.1.4.1.244.1.9.1.2.4.1.1 | Columnslp1EnvMonIndex | not-accessible | current | Index for the environmental monitor table. |
| 1.3.6.1.4.1.244.1.9.1.2.4.1.2 | Columnslp1EnvMonID | read-only | current | The ID of the environmental monitor. |
| 1.3.6.1.4.1.244.1.9.1.2.4.1.3 | Columnslp1EnvMonName | read-write | current | The name of the environmental monitor. |
| 1.3.6.1.4.1.244.1.9.1.2.4.1.4 | Columnslp1EnvMonStatus | read-only | current | The operational status of the environmental monitor. |
| 1.3.6.1.4.1.244.1.9.1.2.4.1.5 | Columnslp1EnvMonWaterSensorName | read-write | current | The name of the water sensor. |
| 1.3.6.1.4.1.244.1.9.1.2.4.1.6 | Columnslp1EnvMonWaterSensorStatus | read-only | current | The status of the water sensor. |
| 1.3.6.1.4.1.244.1.9.1.2.4.1.7 | Columnslp1EnvMonADCName | read-write | current | The name of the analog-to-digital converter. |
| 1.3.6.1.4.1.244.1.9.1.2.4.1.8 | Columnslp1EnvMonADCStatus | read-only | current | The status of the analog-to-digital converter. |
| 1.3.6.1.4.1.244.1.9.1.2.4.1.9 | Columnslp1EnvMonADCCount | read-only | current | The 8-bit count value from the analog-to-digital converter. A non-negative value indicates the digital value retrieved from the ADC. A negative value indicates… |
| 1.3.6.1.4.1.244.1.9.1.2.4.1.10 | Columnslp1EnvMonADCLowThresh | read-write | current | The 8-bit count low threshold value of the analog-to-digital converter. |
| 1.3.6.1.4.1.244.1.9.1.2.4.1.11 | Columnslp1EnvMonADCHighThresh | read-write | current | The 8-bit count high threshold value of the analog-to-digital converter. |
| 1.3.6.1.4.1.244.1.9.1.2.4.1.12 | Columnslp1EnvMonTempHumidSensorCount | read-only | current | The number of temperature/humidity sensors on the environmental monitor. |
| 1.3.6.1.4.1.244.1.9.1.2.4.1.13 | Columnslp1EnvMonContactClosureCount | read-only | current | The number of contact closures on the environmental monitor. |
| 1.3.6.1.4.1.244.1.9.1.2.5 | Tableslp1TempHumidSensorTable | not-accessible | current | A table of temperature/humidity sensors. |
| 1.3.6.1.4.1.244.1.9.1.2.5.1 | Rowslp1TempHumidSensorEntry | not-accessible | current | Row definition for the temperature/humidity sensor table. |
| 1.3.6.1.4.1.244.1.9.1.2.5.1.1 | Columnslp1TempHumidSensorIndex | not-accessible | current | Index for the temperature/humidity sensor table. |
| 1.3.6.1.4.1.244.1.9.1.2.5.1.2 | Columnslp1TempHumidSensorID | read-only | current | The ID of the temperature/humidity sensor. |
| 1.3.6.1.4.1.244.1.9.1.2.5.1.3 | Columnslp1TempHumidSensorName | read-write | current | The name of the temperature/humidity sensor. |
| 1.3.6.1.4.1.244.1.9.1.2.5.1.4 | Columnslp1TempHumidSensorStatus | read-only | current | The operational status of the temperature/humidity sensor. |
| 1.3.6.1.4.1.244.1.9.1.2.5.1.5 | Columnslp1TempHumidSensorTempStatus | read-only | current | The status of the temperature sensor. |
| 1.3.6.1.4.1.244.1.9.1.2.5.1.6 | Columnslp1TempHumidSensorTempValue | read-only | current | The temperature measured by the sensor. A non-negative value indicates the measured temperature in tenths of degrees Celsius. A negative value indicates that a… |
| 1.3.6.1.4.1.244.1.9.1.2.5.1.7 | Columnslp1TempHumidSensorTempLowThresh | read-write | current | The temperature low threshold value of the sensor in degrees Celsius. |
| 1.3.6.1.4.1.244.1.9.1.2.5.1.8 | Columnslp1TempHumidSensorTempHighThresh | read-write | current | The temperature high threshold value of the sensor in degrees Celsius. |
| 1.3.6.1.4.1.244.1.9.1.2.5.1.9 | Columnslp1TempHumidSensorHumidStatus | read-only | current | The status of the humidity sensor. |
| 1.3.6.1.4.1.244.1.9.1.2.5.1.10 | Columnslp1TempHumidSensorHumidValue | read-only | current | The humidity measured by the sensor. A non-negative value indicates the measured humidity in percentage relative humidity. A negative value indicates that a hu… |
| 1.3.6.1.4.1.244.1.9.1.2.5.1.11 | Columnslp1TempHumidSensorHumidLowThresh | read-write | current | The humidity low threshold value of the sensor in percentage relative humidity. |
| 1.3.6.1.4.1.244.1.9.1.2.5.1.12 | Columnslp1TempHumidSensorHumidHighThresh | read-write | current | The humidity low threshold value of the sensor in percentage relative humidity. |
| 1.3.6.1.4.1.244.1.9.1.2.6 | Tableslp1ContactClosureTable | not-accessible | current | A table of contact closures. |
| 1.3.6.1.4.1.244.1.9.1.2.6.1 | Rowslp1ContactClosureEntry | not-accessible | current | Row definition for the contact closure table. |
| 1.3.6.1.4.1.244.1.9.1.2.6.1.1 | Columnslp1ContactClosureIndex | not-accessible | current | Index for the contact closure table. |
| 1.3.6.1.4.1.244.1.9.1.2.6.1.2 | Columnslp1ContactClosureID | read-only | current | The ID of the contact closure. |
| 1.3.6.1.4.1.244.1.9.1.2.6.1.3 | Columnslp1ContactClosureName | read-write | current | The name of the contact closure. |
| 1.3.6.1.4.1.244.1.9.1.2.6.1.4 | Columnslp1ContactClosureStatus | read-only | current | The status of the contact closure. |
| 1.3.6.1.4.1.244.1.9.1.100 | Nodeslp1Traps | |||
| 1.3.6.1.4.1.244.1.9.1.100.0 | Nodeslp1Events | |||
| 1.3.6.1.4.1.244.1.9.1.100.0.1 | Notificationslp1TowerStatusEvent | current | Tower status event. If enabled, this trap is sent when the slp1TowerStatus indicates an error state ('noComm'). This trap is repeated periodically while the sl… | |
| 1.3.6.1.4.1.244.1.9.1.100.0.2 | Notificationslp1InfeedStatusEvent | current | Input feed status event. If enabled, this trap is sent when the slp1InfeedStatus indicates an error state ('offError', 'onError', or 'noComm'). This trap is re… | |
| 1.3.6.1.4.1.244.1.9.1.100.0.3 | Notificationslp1InfeedLoadEvent | current | Input feed load event. If enabled, this trap is sent when the slp1InfeedLoadStatus indicates an error state ('loadLow', 'loadHigh', 'overLoad', 'readError', or… | |
| 1.3.6.1.4.1.244.1.9.1.100.0.4 | Notificationslp1OutletStatusEvent | current | Outlet status event. If enabled, this trap is sent when the slp1OutletStatus indicates an error state ('offError', 'onError', or 'noComm'). This trap is repeat… | |
| 1.3.6.1.4.1.244.1.9.1.100.0.5 | Notificationslp1OutletLoadEvent | current | Outlet load event. If enabled, this trap is sent when the slp1OutletLoadStatus indicates an error state ('loadLow', 'loadHigh', 'overLoad', 'readError', or 'no… | |
| 1.3.6.1.4.1.244.1.9.1.100.0.6 | Notificationslp1OutletChangeEvent | current | Outlet on/off change event. If enabled, this trap is sent when the slp1OutletStatus changes from any 'on' state ('on', 'onWait' or 'onError') to any 'off' stat… | |
| 1.3.6.1.4.1.244.1.9.1.100.0.7 | Notificationslp1EnvMonStatusEvent | current | Environmental monitor status event. If enabled, this trap is sent when the slp1EnvMonStatus indicates an error state ('noComm'). This trap is repeated periodic… | |
| 1.3.6.1.4.1.244.1.9.1.100.0.8 | Notificationslp1EnvMonWaterSensorEvent | current | Environmental monitor water sensor event. If enabled, this trap is sent when the slp1EnvMonWaterSensorStatus indicates an error state ('alarm'). This trap is r… | |
| 1.3.6.1.4.1.244.1.9.1.100.0.9 | Notificationslp1EnvMonADCEvent | current | Environmental monitor analog-to-digital converter event. If enabled, this trap is sent when the slp1EnvMonADCStatus indicates an error state ('countLow' or 'co… | |
| 1.3.6.1.4.1.244.1.9.1.100.0.10 | Notificationslp1TempHumidSensorStatusEvent | current | Temperature/humidity sensor status event. If enabled, this trap is sent when the slp1TempHumidSensorStatus indicates an error state ('lost'). This trap is repe… | |
| 1.3.6.1.4.1.244.1.9.1.100.0.11 | Notificationslp1TempHumidSensorTempEvent | current | Temperature/humidity sensor temperature event. If enabled, this trap is sent when the slp1TempHumidSensorTempStatus indicates an error state ('tempLow' or 'tem… | |
| 1.3.6.1.4.1.244.1.9.1.100.0.12 | Notificationslp1TempHumidSensorHumidEvent | current | Temperature/humidity sensor humidity event. If enabled, this trap is sent when the slp1TempHumidSensorHumidStatus indicates an error state ('humidLow' or 'humi… | |
| 1.3.6.1.4.1.244.1.9.1.100.0.13 | Notificationslp1ContactClosureEvent | current | Contact closure event. If enabled, this trap is sent when the slp1ContactClosureStatus indicates an error state ('alarm'). This trap is repeated periodically w… |