SONOMASYSTEMS-SONOMA-ATM-DS3-MIB
40 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2926.25.7.2 | NodesonomaDS3ATMAdapterGroup | |||
| 1.3.6.1.4.1.2926.25.7.2.1 | NodeatmDs3ConfGroup | |||
| 1.3.6.1.4.1.2926.25.7.2.1.1 | TableatmDs3ConfPhyTable | not-accessible | mandatory | A table of physical layer configuration for the DS3 interface |
| 1.3.6.1.4.1.2926.25.7.2.1.1.1 | RowatmDs3ConfPhyEntry | not-accessible | mandatory | A entry in the table, containing information about the physical layer of a DS3 interface |
| 1.3.6.1.4.1.2926.25.7.2.1.1.1.1 | ColumnatmDs3ConfPhysIndex | read-only | mandatory | The physical interface index. |
| 1.3.6.1.4.1.2926.25.7.2.1.1.1.2 | ColumnatmDs3ConfFraming | read-only | mandatory | DS3 or E3 framing selection. |
| 1.3.6.1.4.1.2926.25.7.2.1.1.1.3 | ColumnatmDs3ConfInsGFCBits | read-write | mandatory | Enable/disable the insertion of GFC bits. |
| 1.3.6.1.4.1.2926.25.7.2.1.1.1.4 | ColumnatmDs3ConfSerBipolarIO | read-write | mandatory | Enable/disable bipolar serial I/O. |
| 1.3.6.1.4.1.2926.25.7.2.1.1.1.5 | ColumnatmDs3ConfScramblePld | read-write | mandatory | Enable/disable payload scrambling. |
| 1.3.6.1.4.1.2926.25.7.2.1.1.1.6 | ColumnatmDs3ConfOverheadPLCP | read-write | mandatory | Enable/disable PLCP processing. |
| 1.3.6.1.4.1.2926.25.7.2.1.1.1.7 | ColumnatmDs3ConfGenerateFEBE | read-write | mandatory | Enable/disable FEBE generation when F, M, or CP bit errors received. |
| 1.3.6.1.4.1.2926.25.7.2.1.1.1.8 | ColumnatmDs3ConfGenerateFEAC | read-write | mandatory | Enable/disable FEAC generation and detection. |
| 1.3.6.1.4.1.2926.25.7.2.1.1.1.9 | ColumnatmDs3ConfLoopback | read-write | mandatory | Enable/disable internal loopback. |
| 1.3.6.1.4.1.2926.25.7.2.1.1.1.10 | ColumnatmDs3ConfCableLength | read-write | mandatory | Configure for the length of the cable. |
| 1.3.6.1.4.1.2926.25.7.2.1.1.1.11 | ColumnatmDs3ConfInternalEqualizer | read-write | mandatory | Configure to use or bypass the internal equalizer. |
| 1.3.6.1.4.1.2926.25.7.2.1.1.1.12 | ColumnatmDs3ConfFillerCells | read-write | mandatory | This parameter indicates the type of filler cells to send when there are no data cells. |
| 1.3.6.1.4.1.2926.25.7.2.1.1.1.13 | ColumnatmDs3ConfGenerateClock | read-write | mandatory | Enable/disable clock generation. |
| 1.3.6.1.4.1.2926.25.7.2.2 | NodeatmDs3StatsGroup | |||
| 1.3.6.1.4.1.2926.25.7.2.2.1 | TableatmDs3PhyStatsTable | not-accessible | mandatory | A table of physical layer statistics information for the DS3 interface |
| 1.3.6.1.4.1.2926.25.7.2.2.1.1 | RowatmDs3PhyStatsEntry | not-accessible | mandatory | A entry in the table, containing information about the physical layer of a DS3 interface |
| 1.3.6.1.4.1.2926.25.7.2.2.1.1.1 | ColumnatmDs3PhyStatsPhysIndex | read-only | mandatory | The physical interface index. |
| 1.3.6.1.4.1.2926.25.7.2.2.1.1.2 | ColumnatmDs3StatsAlarms | read-only | mandatory | Test the PLCP alarm counter |
| 1.3.6.1.4.1.2926.25.7.2.2.1.1.3 | ColumnatmDs3StatsNoSignals | read-only | mandatory | No signal error counter. |
| 1.3.6.1.4.1.2926.25.7.2.2.1.1.4 | ColumnatmDs3StatsNoDs3Frames | read-only | mandatory | No DS-3 frame error counter. |
| 1.3.6.1.4.1.2926.25.7.2.2.1.1.5 | ColumnatmDs3StatsAisDetects | read-only | mandatory | AIS detect counter. |
| 1.3.6.1.4.1.2926.25.7.2.2.1.1.6 | ColumnatmDs3StatsFrameErrs | read-only | mandatory | Frame error counter. |
| 1.3.6.1.4.1.2926.25.7.2.2.1.1.7 | ColumnatmDs3StatsParityErrs | read-only | mandatory | Parity error counter. |
| 1.3.6.1.4.1.2926.25.7.2.2.1.1.8 | ColumnatmDs3StatsCpErrs | read-only | mandatory | CP error counter. |
| 1.3.6.1.4.1.2926.25.7.2.2.1.1.9 | ColumnatmDs3StatsFeBlockErrs | read-only | mandatory | Far End Block error counter. |
| 1.3.6.1.4.1.2926.25.7.2.2.1.1.10 | ColumnatmDs3StatsBpvErrs | read-only | mandatory | Bipolar Violation error counter. |
| 1.3.6.1.4.1.2926.25.7.2.2.1.1.11 | ColumnatmDs3StatsRemoteAlarms | read-only | mandatory | Bipolar Violation error counter. |
| 1.3.6.1.4.1.2926.25.7.2.2.1.1.12 | ColumnatmDs3StatsSignalLoss | read-only | mandatory | Signal loss indication. |
| 1.3.6.1.4.1.2926.25.7.2.2.1.1.13 | ColumnatmDs3StatsOutOfCell | read-only | mandatory | ATM out-of-cell delineation. |
| 1.3.6.1.4.1.2926.25.7.2.2.1.1.14 | ColumnatmDs3StatsFifoOverflow | read-only | mandatory | ATM FIFO overflow. |
| 1.3.6.1.4.1.2926.25.7.2.2.1.1.15 | ColumnatmDs3StatsRemoteAlarmInd | read-only | mandatory | Remote alarm indication. |
| 1.3.6.1.4.1.2926.25.7.2.2.1.1.16 | ColumnatmDs3StatsFrameLoss | read-only | mandatory | Frame loss indication. |
| 1.3.6.1.4.1.2926.25.7.2.2.1.1.17 | ColumnatmDs3StatsSyncLoss | read-only | mandatory | Synchronization loss counter. |
| 1.3.6.1.4.1.2926.25.7.2.2.1.1.18 | ColumnatmDs3StatsPlcpAlarmState | read-only | mandatory | Test the PLCP alarm state. |
| 1.3.6.1.4.1.2926.25.7.2.2.1.1.19 | ColumnatmDs3StatsAisState | read-only | mandatory | AIS detect LED state. |
| 1.3.6.1.4.1.2926.25.7.2.2.1.1.20 | ColumnatmDs3StatsClearCounters | read-write | mandatory | Clear all counters in this group ONLY. |