SONOMASYSTEMS-SONOMA-ATM-E3-MIB
41 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2926.25.7.3 | NodesonomaE3ATMAdapterGroup | |||
| 1.3.6.1.4.1.2926.25.7.3.1 | NodeatmE3ConfGroup | |||
| 1.3.6.1.4.1.2926.25.7.3.1.1 | TableatmE3ConfPhyTable | not-accessible | mandatory | A table of physical layer configuration for the E3 interface |
| 1.3.6.1.4.1.2926.25.7.3.1.1.1 | RowatmE3ConfPhyEntry | not-accessible | mandatory | A entry in the table, containing information about the physical layer of a E3 interface |
| 1.3.6.1.4.1.2926.25.7.3.1.1.1.1 | ColumnatmE3ConfPhysIndex | read-only | mandatory | The physical interface index. |
| 1.3.6.1.4.1.2926.25.7.3.1.1.1.2 | ColumnatmE3ConfFraming | read-only | mandatory | Indicates the type of framing supported. |
| 1.3.6.1.4.1.2926.25.7.3.1.1.1.3 | ColumnatmE3ConfInsGFCBits | read-write | mandatory | Enable/disable the insertion of GFC bits. |
| 1.3.6.1.4.1.2926.25.7.3.1.1.1.4 | ColumnatmE3ConfSerBipolarIO | read-write | mandatory | Enable/disable bipolar serial I/O. |
| 1.3.6.1.4.1.2926.25.7.3.1.1.1.5 | ColumnatmE3ConfPayloadScrambling | read-write | mandatory | Enable/disable payload scrambling. |
| 1.3.6.1.4.1.2926.25.7.3.1.1.1.6 | ColumnatmE3ConfOverheadProcessing | read-write | mandatory | Enable/disable Overhead processing. |
| 1.3.6.1.4.1.2926.25.7.3.1.1.1.7 | ColumnatmE3ConfHDB3Encoding | read-write | mandatory | Enable/disable HDB3 (High Density Bipolar 3) Encoding. |
| 1.3.6.1.4.1.2926.25.7.3.1.1.1.8 | ColumnatmE3ConfLoopback | read-write | mandatory | This object is used to modify the state of internal loopback.... |
| 1.3.6.1.4.1.2926.25.7.3.1.1.1.9 | ColumnatmE3ConfCableLength | read-write | mandatory | Configure for the length of the cable. |
| 1.3.6.1.4.1.2926.25.7.3.1.1.1.10 | ColumnatmE3ConfInternalEqualizer | read-write | mandatory | Configure to use or bypass the internal equalizer. |
| 1.3.6.1.4.1.2926.25.7.3.1.1.1.11 | ColumnatmE3ConfFillerCells | read-write | mandatory | This parameter indicates the type of filler cells to send when there are no data cells. |
| 1.3.6.1.4.1.2926.25.7.3.1.1.1.12 | ColumnatmE3ConfGenerateClock | read-write | mandatory | Enable/disable clock generation. |
| 1.3.6.1.4.1.2926.25.7.3.2 | NodeatmE3StatsGroup | |||
| 1.3.6.1.4.1.2926.25.7.3.2.1 | TableatmE3StatsTable | not-accessible | mandatory | A table of physical layer statistics information for the E3 interface |
| 1.3.6.1.4.1.2926.25.7.3.2.1.1 | RowatmE3StatsEntry | not-accessible | mandatory | A entry in the table, containing information about the physical layer of a E3 interface |
| 1.3.6.1.4.1.2926.25.7.3.2.1.1.1 | ColumnatmE3StatsPhysIndex | read-only | mandatory | The physical interface index. |
| 1.3.6.1.4.1.2926.25.7.3.2.1.1.2 | ColumnatmE3StatsNoSignals | read-only | mandatory | No signal error counter. |
| 1.3.6.1.4.1.2926.25.7.3.2.1.1.3 | ColumnatmE3StatsNoE3Frames | read-only | mandatory | No E3 frames error counter. |
| 1.3.6.1.4.1.2926.25.7.3.2.1.1.4 | ColumnatmE3StatsFrameErrors | read-only | mandatory | A count of the number of Frames in error. |
| 1.3.6.1.4.1.2926.25.7.3.2.1.1.5 | ColumnatmE3StatsHECErrors | read-only | mandatory | HEC (Header Error Check) error counter. |
| 1.3.6.1.4.1.2926.25.7.3.2.1.1.6 | ColumnatmE3StatsEMErrors | read-only | mandatory | EM (error monitoring) error counter. |
| 1.3.6.1.4.1.2926.25.7.3.2.1.1.7 | ColumnatmE3StatsFeBlockErrors | read-only | mandatory | Far End Block error counter. |
| 1.3.6.1.4.1.2926.25.7.3.2.1.1.8 | ColumnatmE3StatsBpvErrors | read-only | mandatory | Bipolar Violation error counter. |
| 1.3.6.1.4.1.2926.25.7.3.2.1.1.9 | ColumnatmE3StatsPayloadTypeMismatches | read-only | mandatory | Payload Type Mismatches error counter. |
| 1.3.6.1.4.1.2926.25.7.3.2.1.1.10 | ColumnatmE3StatsTimingMarkers | read-only | mandatory | Timing Markers error counter. |
| 1.3.6.1.4.1.2926.25.7.3.2.1.1.11 | ColumnatmE3StatsAISDetects | read-only | mandatory | AIS (Alarm Indication Signal) detect counter. |
| 1.3.6.1.4.1.2926.25.7.3.2.1.1.12 | ColumnatmE3StatsRDIDetects | read-only | mandatory | RDI (Remote Defect Indication) error counter. |
| 1.3.6.1.4.1.2926.25.7.3.2.1.1.13 | ColumnatmE3StatsSignalLoss | read-only | mandatory | Signal loss indication. |
| 1.3.6.1.4.1.2926.25.7.3.2.1.1.14 | ColumnatmE3StatsFrameLoss | read-only | mandatory | Frame loss indication. |
| 1.3.6.1.4.1.2926.25.7.3.2.1.1.15 | ColumnatmE3StatsSyncLoss | read-only | mandatory | Synchronization loss counter. |
| 1.3.6.1.4.1.2926.25.7.3.2.1.1.16 | ColumnatmE3StatsOutOfCell | read-only | mandatory | ATM out-of-cell delineation. |
| 1.3.6.1.4.1.2926.25.7.3.2.1.1.17 | ColumnatmE3StatsFIFOOverflow | read-only | mandatory | ATM FIFO overflow. |
| 1.3.6.1.4.1.2926.25.7.3.2.1.1.18 | ColumnatmE3StatsPayloadTypeMismatch | read-only | mandatory | The Payload Type Mismatch state. |
| 1.3.6.1.4.1.2926.25.7.3.2.1.1.19 | ColumnatmE3StatsTimingMarker | read-only | mandatory | The Timing Marker state. |
| 1.3.6.1.4.1.2926.25.7.3.2.1.1.20 | ColumnatmE3StatsAISDetect | read-only | mandatory | The AIS (Alarm Indication Signal) state. |
| 1.3.6.1.4.1.2926.25.7.3.2.1.1.21 | ColumnatmE3StatsRDIDetect | read-only | mandatory | RDI (Remote Defect Indication) state. |
| 1.3.6.1.4.1.2926.25.7.3.2.1.1.22 | ColumnatmE3StatsClearCounters | read-write | mandatory | Clear all counters in this group ONLY. |