SONOMASYSTEMS-SONOMA-ATM-GENERIC-MIB
158 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2926.25.7.1 | NodesonomaGenericATMGroup | |||
| 1.3.6.1.4.1.2926.25.7.1.1 | NodeatmGenericPhysGroup | |||
| 1.3.6.1.4.1.2926.25.7.1.1.1 | TableatmGenPhysTable | not-accessible | mandatory | A table of physical layer status and parameter information for the UNI's physical interface |
| 1.3.6.1.4.1.2926.25.7.1.1.1.1 | RowatmGenPhysEntry | not-accessible | mandatory | A entry in the table, containing information about the physical layer of a UNI interface |
| 1.3.6.1.4.1.2926.25.7.1.1.1.1.1 | ColumnatmGenPhysIndex | read-only | mandatory | The physical interface instance. |
| 1.3.6.1.4.1.2926.25.7.1.1.1.1.2 | ColumnatmGenPhysAal5Mtu | read-only | mandatory | The AAL5 MTU capacity for the physical interface, assigned by PM. |
| 1.3.6.1.4.1.2926.25.7.1.1.1.1.3 | ColumnatmGenPhysAal5CrcErrors | read-only | mandatory | The total number of AAL5 CPCS PDUs received with CRC-32 errors at the interface associated with an AAL5 entity. |
| 1.3.6.1.4.1.2926.25.7.1.1.1.1.4 | ColumnatmGenPhysAal5OverSizedSDUs | read-only | mandatory | The total number of AAL5 CPCS PDUs discarded at the interface associated with an AAL5 entity because the AAL5 SDUs were too large. |
| 1.3.6.1.4.1.2926.25.7.1.1.1.1.5 | ColumnatmGenPhysAal5DiscardPDU | read-only | mandatory | The total number of AAL5 CPCS PDUs discarded at the interface associated with an AAL5 entity because no receive free buffers were available. Only available wit… |
| 1.3.6.1.4.1.2926.25.7.1.1.1.1.6 | ColumnatmGenPhysHECErrors | read-only | mandatory | The total number ATM cells dropped out to HEC errors. Only available with TCOP atm card. |
| 1.3.6.1.4.1.2926.25.7.1.1.1.1.7 | ColumnatmGenPhysUnknownProtocols | read-only | mandatory | The total number cells received with an unknown header. Only available with TCOP atm card. |
| 1.3.6.1.4.1.2926.25.7.1.1.1.1.8 | ColumnatmGenPhysCellsReceived | read-only | mandatory | The total number ATM cells received with no errors. Only available with TCOP atm card. |
| 1.3.6.1.4.1.2926.25.7.1.1.1.1.9 | ColumnatmGenPhysCellsTransmitted | read-only | mandatory | The total number ATM cells actually transmitted. Only available with TCOP atm card. |
| 1.3.6.1.4.1.2926.25.7.1.1.1.1.10 | ColumnatmGenPhysRxBufStarvation | read-only | mandatory | The total number of occurrences when no Rx free buffer is available at the interface associated with an AAL5 entity. |
| 1.3.6.1.4.1.2926.25.7.1.1.1.1.11 | ColumnatmGenPhysRxFreeze | read-only | mandatory | The total number of occurrences when Rx completion ring overflows at the interface associated with an AAL5 entity. |
| 1.3.6.1.4.1.2926.25.7.1.1.1.1.12 | ColumnatmGenPhysTxFreeze | read-only | mandatory | The total number of occurrences when Tx completion ring overflows at the interface associated with an AAL5 entity. |
| 1.3.6.1.4.1.2926.25.7.1.1.2 | TableatmGenRateTable | not-accessible | mandatory | A table of ATM layer configuration for the ATM-DS3/E3/OC3c interface. Only used by earlier version of software. |
| 1.3.6.1.4.1.2926.25.7.1.1.2.1 | RowatmGenRateEntry | not-accessible | mandatory | A entry in the table, containing information about the rate queues on this physical interface. |
| 1.3.6.1.4.1.2926.25.7.1.1.2.1.1 | ColumnatmGenRatePhysIndex | read-only | mandatory | The ATM interface index, for this table the value of this object corresponds to the physical port instance. |
| 1.3.6.1.4.1.2926.25.7.1.1.2.1.2 | ColumnatmGenRateQueOne | read-write | mandatory | The value of this object can be set to any value in the range 0 to 30720 for E3, the range 0 to 36864 for DS3, and the range 0 to 135150 for OC3. The combinati… |
| 1.3.6.1.4.1.2926.25.7.1.1.2.1.3 | ColumnatmGenRateQueTwo | read-write | mandatory | The ATM layer rate queue number two bandwidth. |
| 1.3.6.1.4.1.2926.25.7.1.1.2.1.4 | ColumnatmGenRateQueThree | read-write | mandatory | The ATM layer rate queue number three bandwidth. |
| 1.3.6.1.4.1.2926.25.7.1.1.2.1.5 | ColumnatmGenRateQueFour | read-write | mandatory | The ATM layer rate queue number four bandwidth. |
| 1.3.6.1.4.1.2926.25.7.1.1.2.1.6 | ColumnatmGenRateQueFive | read-write | mandatory | The ATM layer rate queue number five bandwidth. |
| 1.3.6.1.4.1.2926.25.7.1.1.2.1.7 | ColumnatmGenRateQueSix | read-write | mandatory | The ATM layer rate queue number six bandwidth. |
| 1.3.6.1.4.1.2926.25.7.1.1.2.1.8 | ColumnatmGenRateQueSeven | read-write | mandatory | The ATM layer rate queue number seven bandwidth. |
| 1.3.6.1.4.1.2926.25.7.1.1.2.1.9 | ColumnatmGenRateQueEight | read-write | mandatory | The ATM layer rate queue number eight bandwidth. |
| 1.3.6.1.4.1.2926.25.7.1.1.3 | TableatmGenRateQTable | not-accessible | mandatory | A table of ATM layer configuration for the ATM-DS3/E3/OC3c interface. Not used with TCOP atm card. |
| 1.3.6.1.4.1.2926.25.7.1.1.3.1 | RowatmGenRateQEntry | not-accessible | mandatory | A entry in the table, containing information about the rate queues on this physical interface. |
| 1.3.6.1.4.1.2926.25.7.1.1.3.1.1 | ColumnatmGenRateQPhysIndex | read-only | mandatory | The ATM interface index, for this table the value of this object corresponds to the physical port instance. |
| 1.3.6.1.4.1.2926.25.7.1.1.3.1.2 | ColumnatmGenRateQNumber | read-write | mandatory | The ATM layer rate queue number. |
| 1.3.6.1.4.1.2926.25.7.1.1.3.1.3 | ColumnatmGenRateQueue | read-write | mandatory | The value of this object can be set to any value in the range 0 to 30720 for E3, the range 0 to 36864 for DS3, and the range 0 to 135150 for OC3. The combinati… |
| 1.3.6.1.4.1.2926.25.7.1.2 | NodeatmGenericVclGroup | |||
| 1.3.6.1.4.1.2926.25.7.1.2.1 | TableatmGenVclTable | not-accessible | mandatory | The Virtual Channel Link (VCL) table. A bi-directional VCL is modeled as one entry in this table. |
| 1.3.6.1.4.1.2926.25.7.1.2.1.1 | RowatmGenVclEntry | not-accessible | mandatory | An entry in the VCL table. This entry is used to model a bi-directional VCL. |
| 1.3.6.1.4.1.2926.25.7.1.2.1.1.1 | ColumnatmGenVclIfIndex | read-only | mandatory | The physical interface instance. |
| 1.3.6.1.4.1.2926.25.7.1.2.1.1.2 | ColumnatmGenVclVpi | read-only | mandatory | The VPI value of the VCL, 0 - 255. |
| 1.3.6.1.4.1.2926.25.7.1.2.1.1.3 | ColumnatmGenVclVci | read-only | mandatory | The VCI value of the VCL. Minimum value of 32 when VPI is 0 and minimum value of 1 for all other VPI. Maximum value of 1023 for 1561 adapter and maximum value … |
| 1.3.6.1.4.1.2926.25.7.1.2.1.1.4 | ColumnatmGenVclRateQ | read-write | mandatory | The Rate Queue used by this virtual circuit. |
| 1.3.6.1.4.1.2926.25.7.1.2.1.1.5 | ColumnatmGenVclAction | read-write | mandatory | This object is used to create or delete a row in this table. A set request to add a row to this table need only contain this object's value in the PDU. The row… |
| 1.3.6.1.4.1.2926.25.7.1.2.2 | TableatmGenVclTmTable | not-accessible | mandatory | The Virtual Channel Link (VCL) table. A bi-directional VCL is modeled as one entry in this table. |
| 1.3.6.1.4.1.2926.25.7.1.2.2.1 | RowatmGenVclTmEntry | not-accessible | mandatory | An entry in the VCL table. This entry is used to model a bi-directional VCL. |
| 1.3.6.1.4.1.2926.25.7.1.2.2.1.1 | ColumnatmGenVclTmIfIndex | read-only | mandatory | The physical interface instance. |
| 1.3.6.1.4.1.2926.25.7.1.2.2.1.2 | ColumnatmGenVclTmVpi | read-only | mandatory | The VPI value of the VCL, 0 - 255. |
| 1.3.6.1.4.1.2926.25.7.1.2.2.1.3 | ColumnatmGenVclTmVci | read-only | mandatory | The VCI value of the VCL. Minimum value of 32 when VPI is 0 and minimum value of 1 for all other VPI. Maximum value of 1023 for 1561 adapter and maximum value … |
| 1.3.6.1.4.1.2926.25.7.1.2.2.1.4 | ColumnatmGenVclTmPCR | read-write | mandatory | Specify Peak Cell Rate. |
| 1.3.6.1.4.1.2926.25.7.1.2.2.1.5 | ColumnatmGenVclTmSCR | read-write | mandatory | Specify Sustainable Cell Rate. |
| 1.3.6.1.4.1.2926.25.7.1.2.2.1.6 | ColumnatmGenVclTmMBS | read-write | mandatory | Specify Maximum Burst Size. |
| 1.3.6.1.4.1.2926.25.7.1.2.2.1.7 | ColumnatmGenVclTmAction | read-write | mandatory | This object is used to create or delete a row in this table. A set request to add a row to this table need only contain this object's value in the PDU. The row… |
| 1.3.6.1.4.1.2926.25.7.1.2.3 | TableatmGenVclStatsTable | not-accessible | mandatory | The Virtual Channel Link (VCL) table. A bi-directional VCL is modeled as one entry in this table. |
| 1.3.6.1.4.1.2926.25.7.1.2.3.1 | RowatmGenVclStatsEntry | not-accessible | mandatory | An entry in the VCL table. |
| 1.3.6.1.4.1.2926.25.7.1.2.3.1.1 | ColumnatmGenVclStatsIfIndex | read-only | mandatory | The physical interface instance. |
| 1.3.6.1.4.1.2926.25.7.1.2.3.1.2 | ColumnatmGenVclStatsVpi | read-only | mandatory | The VPI value of the VCL, 0 - 255. |
| 1.3.6.1.4.1.2926.25.7.1.2.3.1.3 | ColumnatmGenVclStatsVci | read-only | mandatory | The VCI value of the VCL, 35 - 1023. |
| 1.3.6.1.4.1.2926.25.7.1.2.3.1.4 | ColumnatmGenVclStatsCellsReceived | read-only | mandatory | The total number of cells received by this virtual circuit. |
| 1.3.6.1.4.1.2926.25.7.1.2.3.1.5 | ColumnatmGenVclStatsCellsTransmitted | read-only | mandatory | The total number of cells transmitted by this virtual circuit. |
| 1.3.6.1.4.1.2926.25.7.1.2.3.1.6 | ColumnatmGenVclStatsOamAisRcvCells | read-only | mandatory | The total number of AIS OAM cells received by this virtual circuit. |
| 1.3.6.1.4.1.2926.25.7.1.2.3.1.7 | ColumnatmGenVclStatsOamAisXmtCells | read-only | mandatory | The total number of AIS OAM cells transmitted by this virtual circuit. |
| 1.3.6.1.4.1.2926.25.7.1.2.3.1.8 | ColumnatmGenVclStatsOamRdiRcvCells | read-only | mandatory | The total number of RDI OAM cells received by this virtual circuit. |
| 1.3.6.1.4.1.2926.25.7.1.2.3.1.9 | ColumnatmGenVclStatsOamRdiXmtCells | read-only | mandatory | The total number of RDI OAM cells transmitted by this virtual circuit. |
| 1.3.6.1.4.1.2926.25.7.1.2.3.1.10 | ColumnatmGenVclStatsOamLoopbackRcvCells | read-only | mandatory | The total number of Loopback OAM cells received by this virtual circuit. |
| 1.3.6.1.4.1.2926.25.7.1.2.3.1.11 | ColumnatmGenVclStatsOamLoopbackXmtCells | read-only | mandatory | The total number of Loopback OAM cells transmitted by this virtual circuit. |
| 1.3.6.1.4.1.2926.25.7.1.3 | NodeatmGenericLpGroup | |||
| 1.3.6.1.4.1.2926.25.7.1.3.1 | TableatmGenLogicalPortTable | not-accessible | mandatory | A table of physical layer status and parameter information for the UNI's physical interface |
| 1.3.6.1.4.1.2926.25.7.1.3.1.1 | RowatmGenLogicalPortEntry | not-accessible | mandatory | A entry in the table, containing information about the physical layer of a UNI interface |
| 1.3.6.1.4.1.2926.25.7.1.3.1.1.1 | ColumnatmGenLpIfIndex | read-only | mandatory | The logical port index. |
| 1.3.6.1.4.1.2926.25.7.1.3.1.1.2 | ColumnatmGenLpPhysIf | read-only | mandatory | The physical interface associated with this logical port. |
| 1.3.6.1.4.1.2926.25.7.1.3.1.1.3 | ColumnatmGenLpLoopTime | read-write | mandatory | The time (in hundredths of a second) to drop a receive frame. |
| 1.3.6.1.4.1.2926.25.7.1.3.1.1.4 | ColumnatmGenLpProtocol | read-only | mandatory | Network layer for the VC's attached to this LP |
| 1.3.6.1.4.1.2926.25.7.1.3.1.1.5 | ColumnatmGenLpAal5EncapsType | read-write | mandatory | An instance of this object only exists when the local VCL end-point is also the VCC end-point, and AAL5 is in use. The type of data encapsulation used over the… |
| 1.3.6.1.4.1.2926.25.7.1.3.1.1.6 | ColumnatmGenLpAal5Mtu | read-write | mandatory | The PDU size for the AAL5 CPCS layer that can be processed by the AAL5 entity, 64 - 16K. |
| 1.3.6.1.4.1.2926.25.7.1.3.1.1.7 | ColumnatmGenLpAal5RateQ | read-only | mandatory | The rate queue used by this virtual circuit. |
| 1.3.6.1.4.1.2926.25.7.1.3.1.1.8 | ColumnatmGenLpAdminStatus | read-only | mandatory | The logical port status, just for reference. The Port Manager has control of the status. |
| 1.3.6.1.4.1.2926.25.7.1.3.1.1.9 | ColumnatmGenLpLoopThreshold | read-write | mandatory | The number of frames receives before a snmp trap will be sent. |
| 1.3.6.1.4.1.2926.25.7.1.3.1.1.10 | ColumnatmGenLpLoopTrapTime | read-write | mandatory | The time (in seconds) between checks to send out snmp trap. |
| 1.3.6.1.4.1.2926.25.7.1.3.1.1.11 | ColumnatmGenLpOamGeneration | read-write | mandatory | Enable or Disable the generation of OAM cells. |
| 1.3.6.1.4.1.2926.25.7.1.4 | NodeatmCesGroup | |||
| 1.3.6.1.4.1.2926.25.7.1.4.1 | TablecesConfTable | not-accessible | mandatory | The CES configuration table used to manage interworking between CBR interfaces or channels and ATM Virtual Channel Links (VCLs). The reverse mapping is shown i… |
| 1.3.6.1.4.1.2926.25.7.1.4.1.1 | RowcesConfEntry | not-accessible | mandatory | An entry in the CES configuration table. There is one entry in the table per ATM Port/VPI/VCI. |
| 1.3.6.1.4.1.2926.25.7.1.4.1.1.1 | ColumncesAtmPhysPort | read-only | mandatory | The value of this object is equal to MIB II's ifIndex value of the ATM Port interface mapped through this CES IWF to a CBR interface. This value is overwritten… |
| 1.3.6.1.4.1.2926.25.7.1.4.1.1.2 | ColumncesAtmVpi | read-only | mandatory | The value of this object is equal to the VPI used by the ATM VCL mapped through this CES IWF to a CBR interface. This value is overwritten whenever an active o… |
| 1.3.6.1.4.1.2926.25.7.1.4.1.1.3 | ColumncesAtmVci | read-only | mandatory | The value of this object is equal to the VCI used by the ATM VCL mapped through this CES IWF to a CBR interface. This value is overwritten whenever an active o… |
| 1.3.6.1.4.1.2926.25.7.1.4.1.1.4 | ColumncesCbrService | read-write | mandatory | Define if DSx/Ex service is structured or unstructured. A structured(2) interface is some nx64kbKbps. An unstructured (1) interface is 1.544Mbps, 2.048Mbps, 6.… |
| 1.3.6.1.4.1.2926.25.7.1.4.1.1.5 | ColumncesCbrClockMode | read-write | mandatory | Define if DSx/Ex service clocking mode. This maps into transmit clock source of CBR interface. For structured modes this value, if present, must be set to sync… |
| 1.3.6.1.4.1.2926.25.7.1.4.1.1.6 | ColumncesCas | read-write | mandatory | This parameter selects which AAL1 Format should be used: Without does not carry CAS bits, and uses a single 125 usec frame. With carris CAS bits in a multifram… |
| 1.3.6.1.4.1.2926.25.7.1.4.1.1.7 | ColumncesPartialFill | read-write | mandatory | If partial cell fill is used, the number of user octets per cell must be set with this parameter. Setting this parameter to zero disables partial cell fill, an… |
| 1.3.6.1.4.1.2926.25.7.1.4.1.1.8 | ColumncesBufMaxSize | read-write | mandatory | Define maximum size in 10 microsecond increments of the reassembly buffer. Some implementations may want allow the maximum buffer size to be programmed to a si… |
| 1.3.6.1.4.1.2926.25.7.1.4.1.1.9 | ColumncesCdvRxT | read-write | mandatory | The maximum cell arrival jitter in 10 usec increments that the reassembly process will tolerate in the cell stream without producing errors on the CBR service … |
| 1.3.6.1.4.1.2926.25.7.1.4.1.1.10 | ColumncesCellLossIntegrationPeriod | read-write | mandatory | The time in milliseconds for the cell loss integration period. If a cells are continuously lost for this period of time, cesCellLossStatus is set to loss (2). … |
| 1.3.6.1.4.1.2926.25.7.1.4.1.1.11 | ColumncesConnType | read-write | mandatory | The type of ATM connectivity between associated CES IWF's. Valid values are: other - none of the types specified below pvc - supporting connectivity is a perma… |
| 1.3.6.1.4.1.2926.25.7.1.4.1.1.12 | ColumncesDynBw | read-write | mandatory | The Sonoma Dynamic Bandwidth feature may be enabled or disabled. |
| 1.3.6.1.4.1.2926.25.7.1.4.1.1.13 | ColumncesSigType | read-write | mandatory | This is the A/B signalling type for dynamic bandwidth Idle detection. |
| 1.3.6.1.4.1.2926.25.7.1.4.1.1.14 | ColumncesConfAction | read-write | mandatory | The value of this object indicates whether the entry, is to be attached or removed from the CES Configuration Table. A value of attach has the effect of adding… |
| 1.3.6.1.4.1.2926.25.7.1.4.3 | TablecesStatsTable | not-accessible | mandatory | The CES AAL1 statistical data table. |
| 1.3.6.1.4.1.2926.25.7.1.4.3.1 | RowcesStatsEntry | not-accessible | mandatory | An entry in the CES AAL1 Stats table. There is one entry in this table corresponding to each entry in the cesConfTable. |
| 1.3.6.1.4.1.2926.25.7.1.4.3.1.1 | ColumncesStatsAtmPhyPort | read-only | mandatory | The physical interface instance. |
| 1.3.6.1.4.1.2926.25.7.1.4.3.1.2 | ColumncesStatsAtmVpi | read-only | mandatory | The VPI value of the VCL, 0 - 255. |
| 1.3.6.1.4.1.2926.25.7.1.4.3.1.3 | ColumncesStatsAtmVci | read-only | mandatory | The VCI value of the VCL, 35 - 1023. |
| 1.3.6.1.4.1.2926.25.7.1.4.3.1.4 | ColumncesReassCells | read-only | mandatory | This count gives the number of cells played out to the CES Service Interface. It excludes cells that were discarded for any reason, including cells that were n… |
| 1.3.6.1.4.1.2926.25.7.1.4.3.1.5 | ColumncesHdrErrors | read-only | mandatory | The count of the number of AAL1 header errors detected, including those corrected. Header errors include correctable and uncorrectable CRC, plus bad parity. |
| 1.3.6.1.4.1.2926.25.7.1.4.3.1.6 | ColumncesPointerReframes | read-only | mandatory | This records the count of the number of events in which the AAL1 reassembler found that an SDT pointer is not where it is expected, and the pointer must be rea… |
| 1.3.6.1.4.1.2926.25.7.1.4.3.1.7 | ColumncesPointerParityErrors | read-only | mandatory | This records the count of the number of events in which the AAL1 reassembler detects a parity check failure at the point where a structured data pointer is exp… |
| 1.3.6.1.4.1.2926.25.7.1.4.3.1.8 | ColumncesAal1SeqErrors | read-only | mandatory | Number of times that the sequence number of an incoming AAL1 Type 1 SAR-PDU causes a transition from the 'sync' state to the 'out of sequence' state, as define… |
| 1.3.6.1.4.1.2926.25.7.1.4.3.1.9 | ColumncesLostCells | read-only | mandatory | Number of lost cells, as detected by the AAL1 sequence number processing, for example. This records the count of the number of cells detected as lost in the ne… |
| 1.3.6.1.4.1.2926.25.7.1.4.3.1.10 | ColumncesMisinsertedCells | read-only | mandatory | Number of AAL1 sequence violations which the AAL Convergence sublayer interprets as a misinserted cell, as defined by ITU-T I.363.1. |
| 1.3.6.1.4.1.2926.25.7.1.4.3.1.11 | ColumncesBufUnderflows | read-only | mandatory | Number of buffer underflows. This records the count of the number of times the CES reassembly buffer underflows. In the case of a continuous underflow caused b… |
| 1.3.6.1.4.1.2926.25.7.1.4.3.1.12 | ColumncesBufOverflows | read-only | mandatory | Number of buffer overflows. This records the count of the number of times the CES reassembly buffer overflows. If the CES IWF is implemented with multiple buff… |
| 1.3.6.1.4.1.2926.25.7.1.4.3.1.13 | ColumncesCellLossStatus | read-only | deprecated | When cells are continuously lost for the number of milliseconds specified by cesCellLossIntegrationPeriod, the value is set to loss (2). When cells are no long… |
| 1.3.6.1.4.1.2926.25.7.1.4.4 | TablecesAttachmentTable | not-accessible | mandatory | This table is used to attach a bundle to a physical port and DS0 channel. |
| 1.3.6.1.4.1.2926.25.7.1.4.4.1 | RowcesAttachmentEntry | not-accessible | mandatory | This is an entry in the attach bundle to physical port and DS0 channel table. An entry in this table indicates if the bundle is attached to the physical port a… |
| 1.3.6.1.4.1.2926.25.7.1.4.4.1.1 | ColumncesAttachmentPhysPort | read-only | mandatory | The physical port number of the port to which the bundle is being attached. |
| 1.3.6.1.4.1.2926.25.7.1.4.4.1.2 | ColumncesAttachmentBundle | read-only | mandatory | The bundle number. The range of settable values for this object is 1025 to 1536. |
| 1.3.6.1.4.1.2926.25.7.1.4.4.1.3 | ColumncesAttachmentChan | read-only | mandatory | The value of this object indicates the DS0 channel to which the bundle, identified by cesAttachmentBundle, is attached or is to be attached. |
| 1.3.6.1.4.1.2926.25.7.1.4.4.1.4 | ColumncesAttachmentAction | read-write | mandatory | The value of this object indicates whether the bundle, is to be attached or removed from the physical port and DS0 channel. A value of attach has the effect of… |
| 1.3.6.1.4.1.2926.25.7.1.5 | NodeatmAsiPhysGroup | |||
| 1.3.6.1.4.1.2926.25.7.1.5.1 | NodeatmAsiConfGroup | |||
| 1.3.6.1.4.1.2926.25.7.1.5.1.1 | TableatmAsiConfPhyTable | not-accessible | mandatory | A table of physical layer configuration for the ASI interface |
| 1.3.6.1.4.1.2926.25.7.1.5.1.1.1 | RowatmAsiConfPhyEntry | not-accessible | mandatory | A entry in the table, containing information about the physical layer of an ASI interface |
| 1.3.6.1.4.1.2926.25.7.1.5.1.1.1.1 | ColumnatmAsiConfPhysIndex | read-only | mandatory | The physical interface index. |
| 1.3.6.1.4.1.2926.25.7.1.5.1.1.1.2 | ColumnatmAsiConfLineType | read-write | mandatory | Configure the line type. |
| 1.3.6.1.4.1.2926.25.7.1.5.1.1.1.4 | ColumnatmAsiConfLineCoding | read-write | mandatory | Configure the line coding. |
| 1.3.6.1.4.1.2926.25.7.1.5.1.1.1.5 | ColumnatmAsiConfTxClkSelect | read-write | mandatory | This parameter configures the source of the Tx clock. |
| 1.3.6.1.4.1.2926.25.7.1.5.1.1.1.6 | ColumnatmAsiConfSignalMode | read-write | mandatory | This parameter configures the signal mode. |
| 1.3.6.1.4.1.2926.25.7.1.5.1.1.1.7 | ColumnatmAsiConfLIUType | read-write | mandatory | This parameter configures the Line Interface Unit type. |
| 1.3.6.1.4.1.2926.25.7.1.5.1.1.1.8 | ColumnatmAsiConfLBOType | read-write | mandatory | This parameter configures the Line Build Out. |
| 1.3.6.1.4.1.2926.25.7.1.5.1.1.1.9 | ColumnatmAsiConfIdlePattern | read-write | mandatory | This parameter configures the idle pattern for trunk conditioning. |
| 1.3.6.1.4.1.2926.25.7.1.5.1.1.1.10 | ColumnatmAsiConfLoopbackMode | read-write | mandatory | This parameter configures the loopback mode. |
| 1.3.6.1.4.1.2926.25.7.1.5.1.1.1.11 | ColumnatmAsiConfStopMode | read-write | mandatory | This parameter configures the mode used for stop commands. |
| 1.3.6.1.4.1.2926.25.7.1.5.1.1.1.12 | ColumnatmAsiConfRecoveredClkSource | read-write | mandatory | This parameter configures the source of the recovered clock used for through timing. |
| 1.3.6.1.4.1.2926.25.7.1.5.1.1.1.13 | ColumnatmAsiDebugAddr | read-write | mandatory | PCI Phy address for DS1 port register. |
| 1.3.6.1.4.1.2926.25.7.1.5.1.1.1.14 | ColumnatmAsiDebugReadValue | read-write | mandatory | Value read from DS1 port register. |
| 1.3.6.1.4.1.2926.25.7.1.5.1.1.1.15 | ColumnatmAsiDebugWriteValue | read-write | mandatory | Value written to DS1 port register. |
| 1.3.6.1.4.1.2926.25.7.1.5.1.1.1.16 | ColumnatmAsiDebugRead | read-write | mandatory | Read or Write of DS1 port register (TRUE = READ). |
| 1.3.6.1.4.1.2926.25.7.1.5.2 | NodeatmAsiStatsGroup | |||
| 1.3.6.1.4.1.2926.25.7.1.5.2.1 | TableatmAsiStatsTable | not-accessible | mandatory | A table of physical layer statistics information for the ASI interface |
| 1.3.6.1.4.1.2926.25.7.1.5.2.1.1 | RowatmAsiStatsEntry | not-accessible | mandatory | A entry in the table, containing information about the physical layer of an ASI interface |
| 1.3.6.1.4.1.2926.25.7.1.5.2.1.1.1 | ColumnatmAsiStatsPhysIndex | read-only | mandatory | The physical interface index. |
| 1.3.6.1.4.1.2926.25.7.1.5.2.1.1.2 | ColumnatmAsiStatsNoSignals | read-only | mandatory | No signal error counter. |
| 1.3.6.1.4.1.2926.25.7.1.5.2.1.1.3 | ColumnatmAsiStatsAISDetects | read-only | mandatory | AIS Detect counter. |
| 1.3.6.1.4.1.2926.25.7.1.5.2.1.1.4 | ColumnatmAsiStatsYelAlarmCount | read-only | mandatory | A count of the number of Yellow Alarms. |
| 1.3.6.1.4.1.2926.25.7.1.5.2.1.1.5 | ColumnatmAsiStatsLCVErrors | read-only | mandatory | LCV (Line Code Violation) error counter. |
| 1.3.6.1.4.1.2926.25.7.1.5.2.1.1.6 | ColumnatmAsiStatsPCVErrors | read-only | mandatory | PCV (Path Code Violation) error counter. |
| 1.3.6.1.4.1.2926.25.7.1.5.2.1.1.7 | ColumnatmAsiStatsMOSErrors | read-only | mandatory | Multiframe out of sync error counter. |
| 1.3.6.1.4.1.2926.25.7.1.5.2.1.1.8 | ColumnatmAsiStatsSyncLossCount | read-only | mandatory | Sync Loss counter. |
| 1.3.6.1.4.1.2926.25.7.1.5.2.1.1.9 | ColumnatmAsiStatsHECErrors | read-only | mandatory | HEC error counter. |
| 1.3.6.1.4.1.2926.25.7.1.5.2.1.1.10 | ColumnatmAsiStatsSignalLoss | read-only | mandatory | Signal loss indication. |
| 1.3.6.1.4.1.2926.25.7.1.5.2.1.1.11 | ColumnatmAsiStatsAISDetect | read-only | mandatory | AIS indication. |
| 1.3.6.1.4.1.2926.25.7.1.5.2.1.1.12 | ColumnatmAsiStatsYellowAlarm | read-only | mandatory | Yellow Alarm indication. |
| 1.3.6.1.4.1.2926.25.7.1.5.2.1.1.13 | ColumnatmAsiStatsSyncLoss | read-only | mandatory | Loss of sync indication. |
| 1.3.6.1.4.1.2926.25.7.1.5.2.1.1.14 | ColumnatmAsiStatsTxClockLoss | read-only | mandatory | Loss of transmit clock indication. |
| 1.3.6.1.4.1.2926.25.7.1.5.2.1.1.15 | ColumnatmAsiStatsClearCounters | read-write | mandatory | Clear all counters in this group ONLY. |
| 1.3.6.1.4.1.2926.25.7.1.6 | NodeatmAsmPhysGroup | |||
| 1.3.6.1.4.1.2926.25.7.1.6.1 | NodeatmAsmPhyConfGroup | |||
| 1.3.6.1.4.1.2926.25.7.1.6.1.1 | TableatmAsmPhyConfTable | not-accessible | mandatory | A table of physical layer configuration for the ASM interfaces. |
| 1.3.6.1.4.1.2926.25.7.1.6.1.1.1 | RowatmAsmPhyConfEntry | not-accessible | mandatory | A entry in the table, containing information about the physical layer of an ASM interfaces. |
| 1.3.6.1.4.1.2926.25.7.1.6.1.1.1.1 | ColumnatmAsmPhyConfIndex | read-only | mandatory | The physical interface index. |
| 1.3.6.1.4.1.2926.25.7.1.6.1.1.1.2 | ColumnatmAsmPhyConfAdminLineUsage | read-write | mandatory | The desired physical port's line usage. For some port types, the desired line usage will become effective after the system is rebooted. |
| 1.3.6.1.4.1.2926.25.7.1.6.1.1.1.3 | ColumnatmAsmPhyConfOperLineUsage | read-only | mandatory | The physical port's current line usage. |