SONOMASYSTEMS-SONOMA-ATM-IMA-MIB
155 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2926.25.7.7 | NodesonomaImaATMAdapterGroup | |||
| 1.3.6.1.4.1.2926.25.7.7.1 | NodeatmImaGroupObjects | |||
| 1.3.6.1.4.1.2926.25.7.7.1.1 | ScalarimaGroupNumber | read-only | mandatory | The number of IMA groups configured on this system. |
| 1.3.6.1.4.1.2926.25.7.7.1.2 | TableimaGroupTable | not-accessible | mandatory | The IMA Group Configuration table. |
| 1.3.6.1.4.1.2926.25.7.7.1.2.1 | RowimaGroupEntry | not-accessible | mandatory | An entry in the IMA Group table. |
| 1.3.6.1.4.1.2926.25.7.7.1.2.1.1 | ColumnimaGroupIndex | read-only | mandatory | A unique value for the IMA Group. |
| 1.3.6.1.4.1.2926.25.7.7.1.2.1.2 | ColumnimaGroupRowStatus | read-write | mandatory | This object identifies the IMA Group's administrative status. It is used to enable and disable a group. |
| 1.3.6.1.4.1.2926.25.7.7.1.2.1.3 | ColumnimaGroupIfIndex | read-only | mandatory | This object identifies the logical interface number ('ifIndex') assigned to this IMA group, and is used to identify corresponding rows in the Interfaces MIB. N… |
| 1.3.6.1.4.1.2926.25.7.7.1.2.1.4 | ColumnimaGroupNeState | read-only | mandatory | The current operational state of the near-end IMA Group State Machine. |
| 1.3.6.1.4.1.2926.25.7.7.1.2.1.5 | ColumnimaGroupFeState | read-only | mandatory | The current operational state of the far-end IMA Group State Machine. |
| 1.3.6.1.4.1.2926.25.7.7.1.2.1.6 | ColumnimaGroupFailureStatus | read-only | mandatory | The current failure status of the IMA group (the reason why the GTSM is in the down state. |
| 1.3.6.1.4.1.2926.25.7.7.1.2.1.7 | ColumnimaGroupSymmetry | read-write | mandatory | Symmetry of the IMA group. |
| 1.3.6.1.4.1.2926.25.7.7.1.2.1.8 | ColumnimaGroupMinNumTxLinks | read-write | mandatory | Minimum number of transmit links required to be Active for the IMA group to be in the Up state. |
| 1.3.6.1.4.1.2926.25.7.7.1.2.1.9 | ColumnimaGroupMinNumRxLinks | read-write | mandatory | Minimum number of receive links required to be Active for the IMA group to be in the Up state. |
| 1.3.6.1.4.1.2926.25.7.7.1.2.1.10 | ColumnimaGroupNeTxClkMode | read-write | mandatory | Transmit clocking mode used by the near-end IMA group. |
| 1.3.6.1.4.1.2926.25.7.7.1.2.1.11 | ColumnimaGroupFeTxClkMode | read-only | mandatory | Transmit clocking mode used by the far-end IMA group. |
| 1.3.6.1.4.1.2926.25.7.7.1.2.1.12 | ColumnimaGroupTxTimingRefLink | read-write | mandatory | The ifIndex of the transmit timing reference link to be used by the near-end for IMA data cell clock recovery from the ATM layer. |
| 1.3.6.1.4.1.2926.25.7.7.1.2.1.13 | ColumnimaGroupRxTimingRefLink | read-only | mandatory | The ifIndex of the receive timing reference link to be used by near-end for IMA data cell clock recovery toward the ATM layer. |
| 1.3.6.1.4.1.2926.25.7.7.1.2.1.14 | ColumnimaGroupLastChange | read-only | mandatory | The time-of-day the IMA group last changed operational state (i.e., value of imaNeGroupState changed). |
| 1.3.6.1.4.1.2926.25.7.7.1.2.1.15 | ColumnimaGroupTxImaId | read-write | mandatory | The IMA ID currently in use by the near-end IMA function. |
| 1.3.6.1.4.1.2926.25.7.7.1.2.1.16 | ColumnimaGroupRxImaId | read-only | mandatory | The IMA ID currently in use by the far-end IMA function. |
| 1.3.6.1.4.1.2926.25.7.7.1.2.1.17 | ColumnimaGroupTxFrameLength | read-write | mandatory | The frame length to be used by the IMA group in the transmit direction. Can only be set when the IMA group is startup. |
| 1.3.6.1.4.1.2926.25.7.7.1.2.1.18 | ColumnimaGroupRxFrameLength | read-only | mandatory | Value of IMA frame length as received from remote IMA function. |
| 1.3.6.1.4.1.2926.25.7.7.1.2.1.19 | ColumnimaGroupDiffDelayMax | read-write | mandatory | The maximum number of milliseconds of delay differential among the links that will be tolerated on this interface. |
| 1.3.6.1.4.1.2926.25.7.7.1.2.1.20 | ColumnimaGroupLeastDelayLink | read-only | mandatory | The ifIndex of the link configured in the IMA group which has the smallest link propagation delay. This value has meaning only if at least 1 link has been conf… |
| 1.3.6.1.4.1.2926.25.7.7.1.2.1.21 | ColumnimaGroupDiffDelayMaxObs | read-only | mandatory | The latest maximum differential delay observed (in milliseconds), i.e. between the links having the least and most link propagation delay, among the receive li… |
| 1.3.6.1.4.1.2926.25.7.7.1.2.1.22 | ColumnimaGroupAlphaValue | read-write | mandatory | This indicates the 'alpha' value used to specify the number of consecutive invalid ICP cells to be detected before moving to the IMA HUNT state. |
| 1.3.6.1.4.1.2926.25.7.7.1.2.1.23 | ColumnimaGroupBetaValue | read-write | mandatory | This indicates the 'beta' value used to specify the number of consecutive errored ICP cells to be detected before moving to the IMA HUNT state. |
| 1.3.6.1.4.1.2926.25.7.7.1.2.1.24 | ColumnimaGroupGammaValue | read-write | mandatory | This indicates the 'gamma' value used to specify the number of consecutive valid ICP cells to be detected before moving to the IMA SYNC state from the PRESYNC … |
| 1.3.6.1.4.1.2926.25.7.7.1.2.1.25 | ColumnimaGroupRunningSecs | read-only | mandatory | The amount of time (in seconds) since this IMA group has been in operation (up or down). |
| 1.3.6.1.4.1.2926.25.7.7.1.2.1.26 | ColumnimaGroupUnavailSecs | read-only | mandatory | Count of one second intervals where the IMA Group Traffic State Machine is Down. |
| 1.3.6.1.4.1.2926.25.7.7.1.2.1.27 | ColumnimaGroupNeNumFailures | read-only | mandatory | The number of times a near-end group failure (Config-Abort, Insufficient-Links) has been reported since power-up or reboot. |
| 1.3.6.1.4.1.2926.25.7.7.1.2.1.28 | ColumnimaGroupFeNumFailures | read-only | mandatory | The number of times a far-end group failure (Config-Abort-FE, Insufficient-Links-FE, Blocked-FE) has been reported since power-up or reboot. This is an optiona… |
| 1.3.6.1.4.1.2926.25.7.7.1.2.1.29 | ColumnimaGroupTxAvailCellRate | read-only | mandatory | The current cell rate (truncated value in cells per second) provided by this IMA group in the transmit direction, considering all the transmit links in the Act… |
| 1.3.6.1.4.1.2926.25.7.7.1.2.1.30 | ColumnimaGroupRxAvailCellRate | read-only | mandatory | The current cell rate (truncated value in cells per second) provided by this IMA group in the receive direction, considering all the receive links in the Activ… |
| 1.3.6.1.4.1.2926.25.7.7.1.2.1.31 | ColumnimaGroupNumTxCfgLnks | read-only | mandatory | The number of links that are configured to transmit in this IMA group. |
| 1.3.6.1.4.1.2926.25.7.7.1.2.1.32 | ColumnimaGroupNumRxCfgLnks | read-only | mandatory | The number of links that are configured to receive in this IMA group. |
| 1.3.6.1.4.1.2926.25.7.7.1.2.1.33 | ColumnimaGroupNumTxActLnks | read-only | mandatory | The number of links which are configured to transmit and are currently Active in this IMA group. |
| 1.3.6.1.4.1.2926.25.7.7.1.2.1.34 | ColumnimaGroupNumRxActLnks | read-only | mandatory | The number of links which are configured to receive and are currently Active in this IMA group. |
| 1.3.6.1.4.1.2926.25.7.7.1.2.1.35 | ColumnimaGroupTestLinkIfIndex | read-write | mandatory | This object is used to designate an interface as the Test Link. A value of -1 specifies that the implementation may choose the Test Link. In this case, the imp… |
| 1.3.6.1.4.1.2926.25.7.7.1.2.1.36 | ColumnimaGroupTestPattern | read-write | mandatory | The value of this object is used to specify the test pattern in an IMA group loopback operation. A value in the range 0 to 255 designates a specific pattern. A… |
| 1.3.6.1.4.1.2926.25.7.7.1.2.1.37 | ColumnimaGroupTestProcStatus | read-write | mandatory | This object is used to enable or disable the Test Pattern Procedure, and to note whether at least one link failed the test. The test is started by setting oper… |
| 1.3.6.1.4.1.2926.25.7.7.2 | NodeatmImaLinkObjects | |||
| 1.3.6.1.4.1.2926.25.7.7.2.1 | TableimaLinkTable | not-accessible | mandatory | The IMA group Link Status and Configuration table. |
| 1.3.6.1.4.1.2926.25.7.7.2.1.1 | RowimaLinkEntry | not-accessible | mandatory | An entry in the IMA Group Link table. |
| 1.3.6.1.4.1.2926.25.7.7.2.1.1.1 | ColumnimaLinkIfIndex | read-only | mandatory | This corresponds to the 'ifIndex' of the MIB-II interface on which this link is established. This object also corresponds to the logical number ('ifIndex') ass… |
| 1.3.6.1.4.1.2926.25.7.7.2.1.1.2 | ColumnimaLinkRowStatus | read-write | mandatory | The imaLinkRowStatus object allows create, change and delete operations on imaLinkTable entries. To create a new conceptual row (or instance) of the imaLinkTab… |
| 1.3.6.1.4.1.2926.25.7.7.2.1.1.3 | ColumnimaLinkGroupIndex | read-write | mandatory | The value which identifies the IMA group (imaGroupIndex) of which this link is a member. |
| 1.3.6.1.4.1.2926.25.7.7.2.1.1.4 | ColumnimaLinkNeTxState | read-only | mandatory | The current state of the near-end transmit link. |
| 1.3.6.1.4.1.2926.25.7.7.2.1.1.5 | ColumnimaLinkNeRxState | read-only | mandatory | The current state of the near-end receive link. |
| 1.3.6.1.4.1.2926.25.7.7.2.1.1.6 | ColumnimaLinkFeTxState | read-only | mandatory | The current state of the far-end transmit link as reported via ICP cells. |
| 1.3.6.1.4.1.2926.25.7.7.2.1.1.7 | ColumnimaLinkFeRxState | read-only | mandatory | The current state of the far-end receive link as reported via ICP cells. |
| 1.3.6.1.4.1.2926.25.7.7.2.1.1.8 | ColumnimaLinkNeRxFailureStatus | read-only | mandatory | The current link failure status of the near-end receive link. |
| 1.3.6.1.4.1.2926.25.7.7.2.1.1.9 | ColumnimaLinkFeRxFailureStatus | read-only | mandatory | The current link failure status of the far-end receive link as reported via ICP cells. |
| 1.3.6.1.4.1.2926.25.7.7.2.1.1.10 | ColumnimaLinkTxLid | read-only | mandatory | The outgoing LID used currently on the link by the local end. This value has meaning only if the link belongs to an IMA group. |
| 1.3.6.1.4.1.2926.25.7.7.2.1.1.11 | ColumnimaLinkRxLid | read-only | mandatory | The incoming LID used currently on the link by the remote end as reported via ICP cells. This value has meaning only if the link belongs to an IMA group. |
| 1.3.6.1.4.1.2926.25.7.7.2.1.1.12 | ColumnimaLinkRelDelay | read-only | mandatory | The latest measured delay on this link relative to the link, in the same IMA group, with the least delay. |
| 1.3.6.1.4.1.2926.25.7.7.2.1.1.13 | ColumnimaLinkImaViolations | read-only | mandatory | ICP violations: count of errored, invalid or missing ICP cells during non-SES-IMA condition. |
| 1.3.6.1.4.1.2926.25.7.7.2.1.1.14 | ColumnimaLinkOifAnomalies | read-only | mandatory | The number of OIF anomalies during non-SES-IMA condition at the near-end. This is an optional attribute. |
| 1.3.6.1.4.1.2926.25.7.7.2.1.1.15 | ColumnimaLinkNeSevErroredSec | read-only | mandatory | Count of one second intervals containing several IV-IMA, or one or more link defects (e.g., LOS, OOF/LOF, AIS, LCD), LIF, LODS defects during non-UAS-IMA condi… |
| 1.3.6.1.4.1.2926.25.7.7.2.1.1.16 | ColumnimaLinkFeSevErroredSec | read-only | mandatory | Count of one second intervals containing one or more RDI-IMA defects. |
| 1.3.6.1.4.1.2926.25.7.7.2.1.1.17 | ColumnimaLinkNeUnavailSec | read-only | mandatory | Count of unavailable seconds at near-end: unavailability begins at the onset of 10 contiguous SES-IMA and ends at the onset of 10 contiguous seconds with no SE… |
| 1.3.6.1.4.1.2926.25.7.7.2.1.1.18 | ColumnimaLinkFeUnavailSec | read-only | mandatory | Count of unavailable seconds at far-end: unavailability begins at the onset of 10 contiguous SES-IMA-FE and ends at the onset of 10 contiguous seconds with no … |
| 1.3.6.1.4.1.2926.25.7.7.2.1.1.19 | ColumnimaLinkNeTxUnusableSec | read-only | mandatory | Tx Unusable seconds: count of Unusable seconds at the near end Tx LSM. |
| 1.3.6.1.4.1.2926.25.7.7.2.1.1.20 | ColumnimaLinkNeRxUnusableSec | read-only | mandatory | Rx Unusable seconds: count of Unusable seconds at the near end Rx LSM. |
| 1.3.6.1.4.1.2926.25.7.7.2.1.1.21 | ColumnimaLinkFeTxUnusableSec | read-only | mandatory | Tx Unusable seconds at far-end: count of seconds with Unusable indications from the far-end Tx LSM. |
| 1.3.6.1.4.1.2926.25.7.7.2.1.1.22 | ColumnimaLinkFeRxUnusableSec | read-only | mandatory | Rx Unusable seconds at far-end: count of seconds with Unusable indications from the far-end Rx LSM. |
| 1.3.6.1.4.1.2926.25.7.7.2.1.1.23 | ColumnimaLinkNeTxNumFailures | read-only | mandatory | The number of times a near-end transmit failure alarm condition has been entered on this link. |
| 1.3.6.1.4.1.2926.25.7.7.2.1.1.24 | ColumnimaLinkNeRxNumFailures | read-only | mandatory | The number of times a near-end receive failure alarm condition has been entered on this link (i.e., LIF, LODS, Mis-Connected, RDI-IMA). |
| 1.3.6.1.4.1.2926.25.7.7.2.1.1.25 | ColumnimaLinkFeTxNumFailures | read-only | mandatory | The number of times a far-end transmit failure alarm condition has been entered on this link. This is an optional attribute. |
| 1.3.6.1.4.1.2926.25.7.7.2.1.1.26 | ColumnimaLinkFeRxNumFailures | read-only | mandatory | The number of times a far-end receive failure alarm condition has been entered on this link (i.e., LIF, LODS, Mis-Connected, RDI-IMA). This is an optional attr… |
| 1.3.6.1.4.1.2926.25.7.7.2.1.1.27 | ColumnimaLinkTxStuffs | read-only | mandatory | Counts of stuff events inserted in the transmit direction. This is an optional attribute. |
| 1.3.6.1.4.1.2926.25.7.7.2.1.1.28 | ColumnimaLinkRxStuffs | read-only | mandatory | Counts of stuff events detected in the receive direction. This is an optional attribute. |
| 1.3.6.1.4.1.2926.25.7.7.2.1.1.29 | ColumnimaLinkRxTestPattern | read-only | mandatory | This object identifies the test pattern received in the ICP Cell (octet 17) on the link during the IMA Test Pattern Procedure. This value then may be compared … |
| 1.3.6.1.4.1.2926.25.7.7.2.1.1.30 | ColumnimaLinkTestProcStatus | read-only | mandatory | This value indicates the current state of the Test Pattern Procedure. If the value is disabled(1), the test is not running. A value of operating(2) means the t… |
| 1.3.6.1.4.1.2926.25.7.7.2.1.1.31 | ColumnimaLinkNumber | read-only | mandatory | This corresponds to the link number on the IMA Group. |
| 1.3.6.1.4.1.2926.25.7.7.3 | NodeatmImaDs1Objects | |||
| 1.3.6.1.4.1.2926.25.7.7.3.1 | TableimaDs1Table | not-accessible | mandatory | A table of physical layer configuration for the DS1 interface |
| 1.3.6.1.4.1.2926.25.7.7.3.1.1 | RowimaDs1Entry | not-accessible | mandatory | A entry in the table, containing information about the physical layer of a DS1 interface |
| 1.3.6.1.4.1.2926.25.7.7.3.1.1.1 | ColumnimaDs1Index | read-only | mandatory | The physical interface index. |
| 1.3.6.1.4.1.2926.25.7.7.3.1.1.2 | ColumnimaDs1GroupIndex | read-only | mandatory | The IMA Group's interface index. |
| 1.3.6.1.4.1.2926.25.7.7.3.1.1.3 | ColumnimaDs1ConfLoopback | read-write | mandatory | This object is used to modify the state of internal loopback.... |
| 1.3.6.1.4.1.2926.25.7.7.3.1.1.4 | ColumnimaDs1ConfTxClockSelect | read-write | mandatory | Configure the transmit clock. |
| 1.3.6.1.4.1.2926.25.7.7.3.1.1.5 | ColumnimaDs1ConfLineCode | read-only | mandatory | Configure the line coding method. |
| 1.3.6.1.4.1.2926.25.7.7.3.1.1.6 | ColumnimaDs1ConfFrameFormat | read-only | mandatory | Configure the framing format. |
| 1.3.6.1.4.1.2926.25.7.7.3.1.1.7 | ColumnimaDs1ConfCableLength | read-write | mandatory | Configure the cable length. |
| 1.3.6.1.4.1.2926.25.7.7.3.1.1.8 | ColumnimaDs1ConfTxTimingRefLink | read-only | mandatory | The ifIndex of the transmit timing reference link to be used by the near-end for IMA data cell clock recovery from the ATM layer. |
| 1.3.6.1.4.1.2926.25.7.7.3.1.1.9 | ColumnimaDs1ConfScramble | read-only | mandatory | The cells are scrambled / de-scrambled on the line. |
| 1.3.6.1.4.1.2926.25.7.7.3.1.1.10 | ColumnimaDs1StatsNoSignals | read-only | mandatory | No signal error counter. |
| 1.3.6.1.4.1.2926.25.7.7.3.1.1.11 | ColumnimaDs1StatsAISDetects | read-only | mandatory | AIS Detect counter. |
| 1.3.6.1.4.1.2926.25.7.7.3.1.1.12 | ColumnimaDs1StatsYelAlarmCount | read-only | mandatory | A count of the number of Yellow Alarms. |
| 1.3.6.1.4.1.2926.25.7.7.3.1.1.13 | ColumnimaDs1StatsLCVErrors | read-only | mandatory | LCV (Line Code Violation) error counter. |
| 1.3.6.1.4.1.2926.25.7.7.3.1.1.14 | ColumnimaDs1StatsPCVErrors | read-only | mandatory | PCV (Path Code Violation) error counter. |
| 1.3.6.1.4.1.2926.25.7.7.3.1.1.15 | ColumnimaDs1StatsMOSErrors | read-only | mandatory | Multiframe out of sync error counter. |
| 1.3.6.1.4.1.2926.25.7.7.3.1.1.16 | ColumnimaDs1StatsSyncLossCount | read-only | mandatory | Sync Loss counter. |
| 1.3.6.1.4.1.2926.25.7.7.3.1.1.17 | ColumnimaDs1StatsHECErrors | read-only | mandatory | HEC error counter. |
| 1.3.6.1.4.1.2926.25.7.7.3.1.1.18 | ColumnimaDs1StatsSignalLoss | read-only | mandatory | Signal loss indication. |
| 1.3.6.1.4.1.2926.25.7.7.3.1.1.19 | ColumnimaDs1StatsAISDetect | read-only | mandatory | AIS indication. |
| 1.3.6.1.4.1.2926.25.7.7.3.1.1.20 | ColumnimaDs1StatsYellowAlarm | read-only | mandatory | Yellow Alarm indication. |
| 1.3.6.1.4.1.2926.25.7.7.3.1.1.21 | ColumnimaDs1StatsSyncLoss | read-only | mandatory | Loss of sync indication. |
| 1.3.6.1.4.1.2926.25.7.7.3.1.1.22 | ColumnimaDs1StatsTxClockLoss | read-only | mandatory | Loss of transmit clock indication. |
| 1.3.6.1.4.1.2926.25.7.7.3.1.1.23 | ColumnimaDs1StatsErrSec | read-only | mandatory | Count of Errored Seconds. |
| 1.3.6.1.4.1.2926.25.7.7.3.1.1.24 | ColumnimaDs1StatsLineErrSec | read-only | mandatory | Count of Line Errored Seconds. |
| 1.3.6.1.4.1.2926.25.7.7.3.1.1.25 | ColumnimaDs1StatsErrFreeSec | read-only | mandatory | Count of Error Free Seconds. |
| 1.3.6.1.4.1.2926.25.7.7.3.1.1.26 | ColumnimaDs1StatsBurstErrSec | read-only | mandatory | Count of Bursty Errored Seconds. |
| 1.3.6.1.4.1.2926.25.7.7.3.1.1.27 | ColumnimaDs1StatsSevErrSec | read-only | mandatory | Count of Severely Errored Seconds. |
| 1.3.6.1.4.1.2926.25.7.7.3.1.1.28 | ColumnimaDs1StatsConSevErrSec | read-only | mandatory | Count of Consecutive Severely Errored Seconds. |
| 1.3.6.1.4.1.2926.25.7.7.3.1.1.29 | ColumnimaDs1StatsFailedSignal | read-only | mandatory | Count of Failed Signal conditions. |
| 1.3.6.1.4.1.2926.25.7.7.3.1.1.30 | ColumnimaDs1StatsUnavailSec | read-only | mandatory | Count of unavailable secondss. |
| 1.3.6.1.4.1.2926.25.7.7.3.1.1.31 | ColumnimaDs1StatsSevErrFramSec | read-only | mandatory | Count of Severely Errored Framing Seconds. |
| 1.3.6.1.4.1.2926.25.7.7.3.1.1.32 | ColumnimaDs1StatsClearCounters | read-write | mandatory | Clear all counters in this group ONLY. |
| 1.3.6.1.4.1.2926.25.7.7.3.1.1.33 | ColumnimaDs1DebugAddr | read-write | mandatory | PCI Phy address for DS1 port register. |
| 1.3.6.1.4.1.2926.25.7.7.3.1.1.34 | ColumnimaDs1DebugReadValue | read-write | mandatory | Value read from DS1 port register. |
| 1.3.6.1.4.1.2926.25.7.7.3.1.1.35 | ColumnimaDs1DebugWriteValue | read-write | mandatory | Value written to DS1 port register. |
| 1.3.6.1.4.1.2926.25.7.7.3.1.1.36 | ColumnimaDs1DebugRead | read-write | mandatory | Read or Write of DS1 port register (TRUE = READ). |
| 1.3.6.1.4.1.2926.25.7.7.3.1.1.37 | ColumnimaDs1PortNumber | read-only | mandatory | The port number on the IMA. |
| 1.3.6.1.4.1.2926.25.7.7.4 | NodeatmImaE1Objects | |||
| 1.3.6.1.4.1.2926.25.7.7.4.1 | TableimaE1Table | not-accessible | mandatory | A table of physical layer configuration for the E1 interface |
| 1.3.6.1.4.1.2926.25.7.7.4.1.1 | RowimaE1Entry | not-accessible | mandatory | A entry in the table, containing information about the physical layer of a E1 interface |
| 1.3.6.1.4.1.2926.25.7.7.4.1.1.1 | ColumnimaE1Index | read-only | mandatory | The physical interface index. |
| 1.3.6.1.4.1.2926.25.7.7.4.1.1.2 | ColumnimaE1GroupIndex | read-only | mandatory | The IMA Group's interface index. |
| 1.3.6.1.4.1.2926.25.7.7.4.1.1.3 | ColumnimaE1ConfLoopback | read-write | mandatory | This object is used to modify the state of internal loopback.... |
| 1.3.6.1.4.1.2926.25.7.7.4.1.1.4 | ColumnimaE1ConfTxClockSelect | read-write | mandatory | Configure the transmit clock. |
| 1.3.6.1.4.1.2926.25.7.7.4.1.1.5 | ColumnimaE1ConfLineCode | read-only | mandatory | Configure the line coding method. |
| 1.3.6.1.4.1.2926.25.7.7.4.1.1.6 | ColumnimaE1ConfFrameFormat | read-only | mandatory | Configure the framing format. |
| 1.3.6.1.4.1.2926.25.7.7.4.1.1.7 | ColumnimaE1ConfCableLength | read-write | mandatory | Configure Long or Short Haul. |
| 1.3.6.1.4.1.2926.25.7.7.4.1.1.8 | ColumnimaE1ConfTxTimingRefLink | read-only | mandatory | The ifIndex of the transmit timing reference link to be used by the near-end for IMA data cell clock recovery from the ATM layer. |
| 1.3.6.1.4.1.2926.25.7.7.4.1.1.9 | ColumnimaE1ConfScramble | read-only | mandatory | The cells are scrambled / de-scrambled on the line. |
| 1.3.6.1.4.1.2926.25.7.7.4.1.1.10 | ColumnimaE1StatsNoSignals | read-only | mandatory | No signal error counter. |
| 1.3.6.1.4.1.2926.25.7.7.4.1.1.11 | ColumnimaE1StatsRAIDetects | read-only | mandatory | RAI Detect counter. |
| 1.3.6.1.4.1.2926.25.7.7.4.1.1.12 | ColumnimaE1StatsFASErrors | read-only | mandatory | FAS (Frame Alignment Signal) error counter. |
| 1.3.6.1.4.1.2926.25.7.7.4.1.1.13 | ColumnimaE1StatsCVErrors | read-only | mandatory | CV (Code Violation) error counter. |
| 1.3.6.1.4.1.2926.25.7.7.4.1.1.14 | ColumnimaE1StatsCRCErrors | read-only | mandatory | CRC4 error counter. |
| 1.3.6.1.4.1.2926.25.7.7.4.1.1.15 | ColumnimaE1StatsEBitErrors | read-only | mandatory | E-Bit (FEBE) error counter. |
| 1.3.6.1.4.1.2926.25.7.7.4.1.1.16 | ColumnimaE1StatsSyncLossCount | read-only | mandatory | Sync Loss counter. |
| 1.3.6.1.4.1.2926.25.7.7.4.1.1.17 | ColumnimaE1StatsHECErrors | read-only | mandatory | HEC error counter. |
| 1.3.6.1.4.1.2926.25.7.7.4.1.1.18 | ColumnimaE1StatsSignalLoss | read-only | mandatory | Signal loss indication. |
| 1.3.6.1.4.1.2926.25.7.7.4.1.1.19 | ColumnimaE1StatsRAIDetect | read-only | mandatory | RAI indication. |
| 1.3.6.1.4.1.2926.25.7.7.4.1.1.20 | ColumnimaE1StatsSyncLoss | read-only | mandatory | Loss of sync indication. |
| 1.3.6.1.4.1.2926.25.7.7.4.1.1.21 | ColumnimaE1StatsTxClockLoss | read-only | mandatory | Loss of transmit clock indication. |
| 1.3.6.1.4.1.2926.25.7.7.4.1.1.22 | ColumnimaE1StatsErrSec | read-only | mandatory | Count of Errored Seconds. |
| 1.3.6.1.4.1.2926.25.7.7.4.1.1.23 | ColumnimaE1StatsLineErrSec | read-only | mandatory | Count of Line Errored Seconds. |
| 1.3.6.1.4.1.2926.25.7.7.4.1.1.24 | ColumnimaE1StatsErrFreeSec | read-only | mandatory | Count of Error Free Seconds. |
| 1.3.6.1.4.1.2926.25.7.7.4.1.1.25 | ColumnimaE1StatsBurstErrSec | read-only | mandatory | Count of Bursty Errored Seconds. |
| 1.3.6.1.4.1.2926.25.7.7.4.1.1.26 | ColumnimaE1StatsSevErrSec | read-only | mandatory | Count of Severely Errored Seconds. |
| 1.3.6.1.4.1.2926.25.7.7.4.1.1.27 | ColumnimaE1StatsConSevErrSec | read-only | mandatory | Count of Consecutive Severely Errored Seconds. |
| 1.3.6.1.4.1.2926.25.7.7.4.1.1.28 | ColumnimaE1StatsFailedSignal | read-only | mandatory | Count of Failed Signal conditions. |
| 1.3.6.1.4.1.2926.25.7.7.4.1.1.29 | ColumnimaE1StatsUnavailSec | read-only | mandatory | Count of unavailable secondss. |
| 1.3.6.1.4.1.2926.25.7.7.4.1.1.30 | ColumnimaE1StatsSevErrFramSec | read-only | mandatory | Count of Severely Errored Framing Seconds. |
| 1.3.6.1.4.1.2926.25.7.7.4.1.1.31 | ColumnimaE1StatsClearCounters | read-write | mandatory | Clear all counters in this group ONLY. |
| 1.3.6.1.4.1.2926.25.7.7.4.1.1.32 | ColumnimaE1DebugAddr | read-write | mandatory | PCI Phy address for E1 port register. |
| 1.3.6.1.4.1.2926.25.7.7.4.1.1.33 | ColumnimaE1DebugReadValue | read-write | mandatory | Value read from E1 port register. |
| 1.3.6.1.4.1.2926.25.7.7.4.1.1.34 | ColumnimaE1DebugWriteValue | read-write | mandatory | Value written to E1 port register. |
| 1.3.6.1.4.1.2926.25.7.7.4.1.1.35 | ColumnimaE1DebugRead | read-write | mandatory | Read or Write of E1 port register (TRUE = READ). |
| 1.3.6.1.4.1.2926.25.7.7.4.1.1.36 | ColumnimaE1PortNumber | read-only | mandatory | The port number on the IMA. |