SONOMASYSTEMS-SONOMA-ATM-OC3c-MIB
44 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2926.25.7.4 | NodesonomaOC3cATMAdapterGroup | |||
| 1.3.6.1.4.1.2926.25.7.4.1 | NodeatmOC3cConfGroup | |||
| 1.3.6.1.4.1.2926.25.7.4.1.1 | TableatmOC3cConfPhyTable | not-accessible | mandatory | A table of physical layer configuration for the OC3c interface |
| 1.3.6.1.4.1.2926.25.7.4.1.1.1 | RowatmOC3cConfPhyEntry | not-accessible | mandatory | A entry in the table, containing information about the physical layer of a OC3c interface |
| 1.3.6.1.4.1.2926.25.7.4.1.1.1.1 | ColumnatmOC3cConfPhysIndex | read-only | mandatory | The physical interface index. |
| 1.3.6.1.4.1.2926.25.7.4.1.1.1.2 | ColumnatmOC3cConfFraming | read-write | mandatory | Indicates the type of framing supported. |
| 1.3.6.1.4.1.2926.25.7.4.1.1.1.3 | ColumnatmOC3cConfLoopbackMode | read-write | mandatory | Configure the loopback mode to use. |
| 1.3.6.1.4.1.2926.25.7.4.1.1.1.4 | ColumnatmOC3cConfFillerCells | read-write | mandatory | This parameter indicates the type of filler cells to send when there are no data cells. |
| 1.3.6.1.4.1.2926.25.7.4.1.1.1.5 | ColumnatmOC3cConfOpticalDataLink | read-only | mandatory | This parameter indicates the type of Optical Data Link. |
| 1.3.6.1.4.1.2926.25.7.4.1.1.1.6 | ColumnatmOC3cConfReceiveClockLooping | read-write | mandatory | When enabled, the receive clock is used as the clock for the transmit side. Otherwise an internal oscillator is used for the transmit clock. |
| 1.3.6.1.4.1.2926.25.7.4.2 | NodeatmOC3cStatsGroup | |||
| 1.3.6.1.4.1.2926.25.7.4.2.1 | TableatmOC3cStatsTable | not-accessible | mandatory | A table of physical layer statistics information for the OC3c interface |
| 1.3.6.1.4.1.2926.25.7.4.2.1.1 | RowatmOC3cStatsEntry | not-accessible | mandatory | A entry in the table, containing information about the physical layer of a OC3c interface |
| 1.3.6.1.4.1.2926.25.7.4.2.1.1.1 | ColumnatmOC3cStatsPhysIndex | read-only | mandatory | The physical interface index. |
| 1.3.6.1.4.1.2926.25.7.4.2.1.1.2 | ColumnatmOC3cStatsNoSignals | read-only | mandatory | No signal error counter. |
| 1.3.6.1.4.1.2926.25.7.4.2.1.1.3 | ColumnatmOC3cStatsNoOC3cFrames | read-only | mandatory | No OC3c frames error counter. |
| 1.3.6.1.4.1.2926.25.7.4.2.1.1.4 | ColumnatmOC3cStatsFrameErrors | read-only | mandatory | A count of the number of Frames in error. |
| 1.3.6.1.4.1.2926.25.7.4.2.1.1.5 | ColumnatmOC3cStatsB1ParityErrors | read-only | mandatory | B1 parity error counter. |
| 1.3.6.1.4.1.2926.25.7.4.2.1.1.6 | ColumnatmOC3cStatsB2ParityErrors | read-only | mandatory | B2 parity error counter. |
| 1.3.6.1.4.1.2926.25.7.4.2.1.1.7 | ColumnatmOC3cStatsB3ParityErrors | read-only | mandatory | B3 parity error counter. |
| 1.3.6.1.4.1.2926.25.7.4.2.1.1.8 | ColumnatmOC3cStatsB1BlockErrors | read-only | mandatory | B1 block error counter. |
| 1.3.6.1.4.1.2926.25.7.4.2.1.1.9 | ColumnatmOC3cStatsB2BlockErrors | read-only | mandatory | B2 block error counter. |
| 1.3.6.1.4.1.2926.25.7.4.2.1.1.10 | ColumnatmOC3cStatsB3BlockErrors | read-only | mandatory | B3 block error counter. |
| 1.3.6.1.4.1.2926.25.7.4.2.1.1.11 | ColumnatmOC3cStatsB1CodeViolations | read-only | mandatory | B1 code violation error counter. |
| 1.3.6.1.4.1.2926.25.7.4.2.1.1.12 | ColumnatmOC3cStatsB2CodeViolations | read-only | mandatory | B2 code violation error counter. |
| 1.3.6.1.4.1.2926.25.7.4.2.1.1.13 | ColumnatmOC3cStatsB3CodeViolations | read-only | mandatory | B3 code violation error counter. |
| 1.3.6.1.4.1.2926.25.7.4.2.1.1.14 | ColumnatmOC3cStatsLineFERFDetects | read-only | mandatory | Line FERF detects counter. |
| 1.3.6.1.4.1.2926.25.7.4.2.1.1.15 | ColumnatmOC3cStatsPathFERFDetects | read-only | mandatory | Path FERF detects counter. |
| 1.3.6.1.4.1.2926.25.7.4.2.1.1.16 | ColumnatmOC3cStatsLineAISDetects | read-only | mandatory | Line AIS (Alarm Indication Signal) error counter. |
| 1.3.6.1.4.1.2926.25.7.4.2.1.1.17 | ColumnatmOC3cStatsPathAISDetects | read-only | mandatory | Path AIS (Alarm Indication Signal) error counter. |
| 1.3.6.1.4.1.2926.25.7.4.2.1.1.18 | ColumnatmOC3cStatsRDIDefects | read-only | mandatory | RDI (Remote Defects Indication) error counter. |
| 1.3.6.1.4.1.2926.25.7.4.2.1.1.19 | ColumnatmOC3cStatsSignalLoss | read-only | mandatory | Signal Loss state. |
| 1.3.6.1.4.1.2926.25.7.4.2.1.1.20 | ColumnatmOC3cStatsOpticalCarrierLoss | read-only | mandatory | Optical carrier loss state. |
| 1.3.6.1.4.1.2926.25.7.4.2.1.1.21 | ColumnatmOC3cStatsFrameLoss | read-only | mandatory | The frame loss state. |
| 1.3.6.1.4.1.2926.25.7.4.2.1.1.22 | ColumnatmOC3cStatsSyncLoss | read-only | mandatory | The Sync loss state. |
| 1.3.6.1.4.1.2926.25.7.4.2.1.1.23 | ColumnatmOC3cStatsOutOfCell | read-only | mandatory | The out-of-cell state. |
| 1.3.6.1.4.1.2926.25.7.4.2.1.1.24 | ColumnatmOC3cStatsPointerLoss | read-only | mandatory | The pointer loss state. |
| 1.3.6.1.4.1.2926.25.7.4.2.1.1.25 | ColumnatmOC3cStatsFIFOOverflow | read-only | mandatory | ATM FIFO overflow state. |
| 1.3.6.1.4.1.2926.25.7.4.2.1.1.26 | ColumnatmOC3cStatsLineFERFDetect | read-only | mandatory | Line FERF state. |
| 1.3.6.1.4.1.2926.25.7.4.2.1.1.27 | ColumnatmOC3cStatsPathFERFDetect | read-only | mandatory | Path FERF state. |
| 1.3.6.1.4.1.2926.25.7.4.2.1.1.28 | ColumnatmOC3cStatsLineAISState | read-only | mandatory | The Line AIS (Alarm Indication Signal) state. |
| 1.3.6.1.4.1.2926.25.7.4.2.1.1.29 | ColumnatmOC3cStatsPathAISState | read-only | mandatory | The Path AIS (Alarm Indication Signal) state. |
| 1.3.6.1.4.1.2926.25.7.4.2.1.1.30 | ColumnatmOC3cStatsRDIState | read-only | mandatory | RDI (Remote Defect Indication) state. |
| 1.3.6.1.4.1.2926.25.7.4.2.1.1.31 | ColumnatmOC3cStatsClearCounters | read-write | mandatory | Clear all counters in this group ONLY. |