SONOMASYSTEMS-SONOMA-ETHERNET-MIB
31 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2926.25.5.1 | NodesonomaEthernet | |||
| 1.3.6.1.4.1.2926.25.5.1.1 | NodeethernetAdapterGroup | |||
| 1.3.6.1.4.1.2926.25.5.1.1.1 | NodeenetSMCGroup | |||
| 1.3.6.1.4.1.2926.25.5.1.1.1.1 | TableenetSMCConfigTable | not-accessible | mandatory | A table of Ethernet physical port configuration parameters. |
| 1.3.6.1.4.1.2926.25.5.1.1.1.1.1 | RowenetSMCConfigEntry | not-accessible | mandatory | An entry in the enetSMC port table. |
| 1.3.6.1.4.1.2926.25.5.1.1.1.1.1.1 | ColumnenetSMCConfigIndex | read-only | mandatory | The value of the index uniquely specifies the physical port number to which this entry is applicable. |
| 1.3.6.1.4.1.2926.25.5.1.1.1.1.1.2 | ColumnenetSMCConfigLineSpeed | read-write | mandatory | The line speed configured for this adapter. Auto and 100 Mbit are only valid for the 9332 card. |
| 1.3.6.1.4.1.2926.25.5.1.1.1.1.1.3 | ColumnenetSMCConfigInterface | read-write | mandatory | This type of interface which is configured on this adapter. Setting the value to aui (1) is an invalid operation for interfaces which only support twistedPair … |
| 1.3.6.1.4.1.2926.25.5.1.1.1.1.1.4 | ColumnenetSMCConfigMode | read-write | mandatory | Indicates which duplex mode is configured on this interface. |
| 1.3.6.1.4.1.2926.25.5.1.1.1.2 | TableenetSMCStatsTable | not-accessible | mandatory | A table of Ethernet physical port statistics parameters. |
| 1.3.6.1.4.1.2926.25.5.1.1.1.2.1 | RowenetSMCStatsEntry | not-accessible | mandatory | An entry in the enetSMC port table. |
| 1.3.6.1.4.1.2926.25.5.1.1.1.2.1.1 | ColumnenetSMCStatsIndex | read-only | mandatory | The value of the index uniquely specifies the physical port number to which this entry is applicable. |
| 1.3.6.1.4.1.2926.25.5.1.1.1.2.1.2 | ColumnenetSMCSQEErrors | read-only | mandatory | The number of SQE/Heartbeat errors detected. |
| 1.3.6.1.4.1.2926.25.5.1.1.1.2.1.3 | ColumnenetSMCRxMissedFrames | read-only | mandatory | The number of receive frames missed because no buffers were available to accept the incoming data. |
| 1.3.6.1.4.1.2926.25.5.1.1.1.2.1.4 | ColumnenetSMCRetries | read-only | mandatory | Total number of transmission retries by this station on the attached LAN. |
| 1.3.6.1.4.1.2926.25.5.1.1.1.2.1.5 | ColumnenetSMCCollisions | read-only | mandatory | Total collisions detected on the attached LAN. |
| 1.3.6.1.4.1.2926.25.5.1.1.1.2.1.6 | ColumnenetSMCRunts | read-only | mandatory | Total number of runts detected on the attached LAN. |
| 1.3.6.1.4.1.2926.25.5.1.1.1.2.1.7 | ColumnenetSMCFRAMorCRCErrors | read-only | mandatory | Total number of Framing or CRC errors detected on LAN. |
| 1.3.6.1.4.1.2926.25.5.1.1.1.2.1.8 | ColumnenetSMCTxDeferrals | read-only | mandatory | The total number of TX deferrals encountered on the LAN segment. |
| 1.3.6.1.4.1.2926.25.5.1.1.1.2.1.9 | ColumnenetSMCLateCollisions | read-only | mandatory | Total number of late collisions encountered during transmission by this port. |
| 1.3.6.1.4.1.2926.25.5.1.1.1.2.1.10 | ColumnenetSMCLossofCarrierErrors | read-only | mandatory | Total number of loss of carrier errors encountered by this port. |
| 1.3.6.1.4.1.2926.25.5.1.1.1.2.1.11 | ColumnenetSMCRetryErrors | read-only | mandatory | Total number of TX retry limit errors encountered during transmission by this port. |
| 1.3.6.1.4.1.2926.25.5.1.1.1.2.1.18 | ColumnenetSMCNoOfLinkResets | read-only | mandatory | This is the number of link resets which have occurred since the last reinitialization of the unit. |
| 1.3.6.1.4.1.2926.25.5.1.1.1.2.1.19 | ColumnenetSMCLastLinkResetReason | read-only | mandatory | This object gives the reason code for the last reset which occurred on this LAN physical link. A value of noReason(1) is returned if the link has not reset. A … |
| 1.3.6.1.4.1.2926.25.5.1.1.1.2.1.20 | ColumnenetSMCTimeSinceLastLinkReset | read-only | mandatory | This is the time, in seconds, since the last link reset. |
| 1.3.6.1.4.1.2926.25.5.1.1.1.2.1.21 | ColumnenetSMCRxPackets | read-only | mandatory | This is the number of packets received on this link by the device driver. |
| 1.3.6.1.4.1.2926.25.5.1.1.1.3 | TableenetSMCStatusTable | not-accessible | mandatory | A table of Ethernet physical port status parameters. |
| 1.3.6.1.4.1.2926.25.5.1.1.1.3.1 | RowenetSMCStatusEntry | not-accessible | mandatory | An entry in the enetSMC port status table. |
| 1.3.6.1.4.1.2926.25.5.1.1.1.3.1.1 | ColumnenetSMCLineSpeed | read-only | mandatory | Indicates the current line speed. |
| 1.3.6.1.4.1.2926.25.5.1.1.1.3.1.2 | ColumnenetSMCLineMode | read-only | mandatory | Indicates the current duplex mode on this interface. |
| 1.3.6.1.4.1.2926.25.5.1.1.1.3.1.3 | ColumnenetSMCLineInterface | read-only | mandatory | Indicate the interface as detected. |