SONOMASYSTEMS-SONOMA-IPPROP-MIB
52 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2926.25.4.1 | NodeipRouting | |||
| 1.3.6.1.4.1.2926.25.4.1.1 | ScalaripRIPState | read-write | mandatory | This parameter determines if the RIP routing protocol is enabled globally. This parameter is set to DISABLED if IP routing is disabled globally. |
| 1.3.6.1.4.1.2926.25.4.1.2 | ScalaripSecurity | read-write | mandatory | This parameter enables or disables the security mechanism. |
| 1.3.6.1.4.1.2926.25.4.1.3 | TableipPortConfigTable | not-accessible | mandatory | This is a table of configurable IP parameters. |
| 1.3.6.1.4.1.2926.25.4.1.3.1 | RowipPortConfigEntry | not-accessible | mandatory | This is an entry of the ipPortConfigTable. |
| 1.3.6.1.4.1.2926.25.4.1.3.1.1 | ColumnipPortConfigIndex | read-only | mandatory | This is the Logical Port No. to which this Table entry pertains. |
| 1.3.6.1.4.1.2926.25.4.1.3.1.2 | ColumnipPortForwarding | read-write | mandatory | The indication of whether this entity is acting as a gateway in respect to the forwarding of datagrams received by, but not addressed to, this entity. IP gatew… |
| 1.3.6.1.4.1.2926.25.4.1.3.1.3 | ColumnipPortMACEncapsulation | read-write | mandatory | This parameter determines the LAN encapsulation used when transmitting a datagram on this logical port. This parameter is only applicable for logical ports whi… |
| 1.3.6.1.4.1.2926.25.4.1.3.1.4 | ColumnipPortDisposition | read-write | mandatory | This parameter determines the action taken on a received IP datagram if routing is disabled for this port, and the global routing flag is set to enabled (2). I… |
| 1.3.6.1.4.1.2926.25.4.1.3.1.5 | ColumnipPortMTU | read-write | mandatory | Maximum size of an IP packet that can be transferred through this interface. It is the ifMtu for the port minus the mac header. The minimum value is 64 bytes |
| 1.3.6.1.4.1.2926.25.4.1.3.1.6 | ColumnipPortDefaultGateway | read-write | mandatory | This parameter determines the default gateway for this specific IP port. If the destination for packets received on this port is not in the forwarding table, t… |
| 1.3.6.1.4.1.2926.25.4.1.3.1.7 | ColumnipPortDefaultGatewayLP | read-write | mandatory | This parameter determines the logical port that the default gateway could be reached. |
| 1.3.6.1.4.1.2926.25.4.1.4 | TableipPortAddrTable | not-accessible | mandatory | This table is a table of IP addresses and masks associated with each logical port. |
| 1.3.6.1.4.1.2926.25.4.1.4.1 | RowipPortAddrEntry | not-accessible | mandatory | An entry of the IP port address table. All the objects in an entry must be supplied in a single SET PDU. |
| 1.3.6.1.4.1.2926.25.4.1.4.1.1 | ColumnipPortAddrIndex | read-write | mandatory | An index into the ipPortAddr Table which identifies the Logical Port No, for which the address is valid. |
| 1.3.6.1.4.1.2926.25.4.1.4.1.2 | ColumnipPortIpAddress | read-write | mandatory | The IP Address of the logical port.This object combined with the ipPortAddrIndex object constitutes the instance value used to uniquely identify and entry in t… |
| 1.3.6.1.4.1.2926.25.4.1.4.1.3 | ColumnipPortIpAddressMask | read-write | mandatory | The IP address mask associated with the IP address. |
| 1.3.6.1.4.1.2926.25.4.1.4.1.4 | ColumnipPortAddrType | read-write | mandatory | If the value of this object is valid(1) and we are performing a SetRequest then this is a request to add an entry to the table. If a value of invalid(2) is pas… |
| 1.3.6.1.4.1.2926.25.4.1.5 | ScalaripAccessViolations | read-only | mandatory | This is a count of the number of access violations which have occurred for the entire unit. |
| 1.3.6.1.4.1.2926.25.4.1.6 | ScalaripOtherDiscards | read-only | mandatory | This is the total number of IP datagrams discarded for the entire unit, for other reasons, eg the incorrect configuration of a WAN port, etc |
| 1.3.6.1.4.1.2926.25.4.1.7 | ScalaripOutTransmits | read-only | mandatory | This is the total number of IP datagrams which have been transmitted by this unit. |
| 1.3.6.1.4.1.2926.25.4.1.8 | ScalaripRelay | read-write | mandatory | This parameter enables or disables the BOOTP/DHCP Relay Agent mechanism. |
| 1.3.6.1.4.1.2926.25.4.1.9 | TableipRelayServerTable | not-accessible | mandatory | Table of servers to whom BOOTP/DHCP broadcast messages will be forwarded. |
| 1.3.6.1.4.1.2926.25.4.1.9.1 | RowipRelayServerEntry | not-accessible | mandatory | A particular entry. |
| 1.3.6.1.4.1.2926.25.4.1.9.1.1 | ColumnipRelayServerAddress | read-only | mandatory | The IP Address of the BOOTP/DHCP destination server. |
| 1.3.6.1.4.1.2926.25.4.1.9.1.2 | ColumnipRelayServerStatus | read-write | mandatory | If the value of this object is valid(1) and we are performing a SetRequest then this is a request to add an entry to the table. If a value of invalid(2) is pas… |
| 1.3.6.1.4.1.2926.25.4.1.10 | ScalaripDhcpClient | read-write | mandatory | This parameter enables or disables the DHCP Client capabilities for this entity. |
| 1.3.6.1.4.1.2926.25.4.1.11 | NodeipCounters | |||
| 1.3.6.1.4.1.2926.25.4.1.11.1 | ScalaripInternalReceived | read-only | mandatory | The number of datagrams received that were addressed to the router's IP address. |
| 1.3.6.1.4.1.2926.25.4.1.11.2 | ScalaripLoopback | read-only | mandatory | The number of datagrams looped back to ourselves. |
| 1.3.6.1.4.1.2926.25.4.1.11.3 | ScalaripNonFastPath | read-only | mandatory | The number of datagrams forwarded by software outside the fastpath. |
| 1.3.6.1.4.1.2926.25.4.1.11.4 | ScalaripBackgroundPath | read-only | mandatory | The number of datagrams forwarded or received through the background software path. |
| 1.3.6.1.4.1.2926.25.4.1.11.5 | ScalaripNotForwarding | read-only | mandatory | The number of datagrams received that would have been forwarded except that forwarding was disabled on the inbound port. |
| 1.3.6.1.4.1.2926.25.4.1.11.6 | ScalaripVlanMismatch | read-only | mandatory | The number of datagrams not forwarded because the source VLAN id did not match the destination VLAN id. |
| 1.3.6.1.4.1.2926.25.4.1.11.7 | ScalaripShortHeader | read-only | mandatory | The number of datagrams received with a header shorter than is allowed. |
| 1.3.6.1.4.1.2926.25.4.1.11.8 | ScalaripHeaderLengthError | read-only | mandatory | The number of datagrams received with a header specifying a length longer than the enclosing frame. |
| 1.3.6.1.4.1.2926.25.4.1.11.9 | ScalaripVersionError | read-only | mandatory | The number of datagrams received with an incorrect header version number. |
| 1.3.6.1.4.1.2926.25.4.1.11.10 | ScalaripCsumError | read-only | mandatory | The number of datagrams received with an incorrect header checksum. |
| 1.3.6.1.4.1.2926.25.4.1.11.11 | ScalaripFwdFormatError | read-only | mandatory | The number of datagrams not forwarded because an error was encountered formating the datagram for its next hop. This is an internal software error. |
| 1.3.6.1.4.1.2926.25.4.1.11.12 | ScalaripConvFailedInbound | read-only | mandatory | The number of datagrams not forwarded because an internal buffer translation failed (inbound). This is an internal software error. |
| 1.3.6.1.4.1.2926.25.4.1.11.13 | ScalaripConvFailedOutbound | read-only | mandatory | The number of datagrams not forwarded because an internal buffer translation failed (outbound). This is an internal software error. |
| 1.3.6.1.4.1.2926.25.4.1.11.14 | ScalaripArpRequestsSent | read-only | mandatory | The number of ARP requests sent. |
| 1.3.6.1.4.1.2926.25.4.1.11.15 | ScalaripArpRepliesSent | read-only | mandatory | The number of ARP Replies sent. |
| 1.3.6.1.4.1.2926.25.4.1.11.16 | ScalaripArpRequestsRecv | read-only | mandatory | The number of ARP requests received. |
| 1.3.6.1.4.1.2926.25.4.1.11.17 | ScalaripArpRepliesRecv | read-only | mandatory | The number of ARP replies received. |
| 1.3.6.1.4.1.2926.25.4.1.11.18 | ScalaripArpQueueSatisfied | read-only | mandatory | The number of datagrams queued to an ARP queue that we later transmitted. |
| 1.3.6.1.4.1.2926.25.4.1.11.19 | ScalaripArpQueueDropped | read-only | mandatory | The number of datagrams queued to an ARP queue that we later dropped. |
| 1.3.6.1.4.1.2926.25.4.1.11.20 | ScalaripArpNotQueuedLimit | read-only | mandatory | The number of datagrams not queued to an ARP queue because the limit was reached. |
| 1.3.6.1.4.1.2926.25.4.1.11.21 | ScalaripRequestsThrottled | read-only | mandatory | The number of requests dropped because they exceeded the IP request throttle. |
| 1.3.6.1.4.1.2926.25.4.1.11.22 | ScalaripRequestsThrottledLastSecond | read-only | mandatory | The number of requests dropped in the last second because they exceeded the IP request throttle. |
| 1.3.6.1.4.1.2926.25.4.1.12 | NodeipParameters | |||
| 1.3.6.1.4.1.2926.25.4.1.12.1 | ScalaripparamBackwardingThrottle | read-write | mandatory | In order to avoid denial-of-service attacks, the IP forwarder throttles the number of requests directed to this system which are processed. |