MIB Viewer

SONUS-DS3-MIB

51 objects
The MIB Module DS3 management.
OIDNameAccessStatusDescription
1.3.6.1.4.1.2879.2.4.2IdentitysonusDsx3MIBThe MIB Module DS3 management.
1.3.6.1.4.1.2879.2.4.2.1NodesonusDsx3MIBObjects
1.3.6.1.4.1.2879.2.4.2.1.1NodesonusDsx3Admn
1.3.6.1.4.1.2879.2.4.2.1.1.1NodesonusDsx3AdmnNextIndex
1.3.6.1.4.1.2879.2.4.2.1.1.2TablesonusDsx3AdmnTablenot-accessiblecurrentTable of Sonus Enterprise Configurations for all DS3s
1.3.6.1.4.1.2879.2.4.2.1.1.2.1RowsonusDsx3AdmnEntrynot-accessiblecurrentEntry in Table consisting of the all the Sonus Enterprise DS3 Configurations
1.3.6.1.4.1.2879.2.4.2.1.1.2.1.1ColumnsonusDsx3AdmnRowStatusread-writecurrentDS3, Needed for SNMP
1.3.6.1.4.1.2879.2.4.2.1.1.2.1.2ColumnsonusDsx3AdmnNameread-writecurrentName of this DS3
1.3.6.1.4.1.2879.2.4.2.1.1.2.1.3ColumnsonusDsx3AdmnShelfIndexread-onlycurrentShelf index for this table
1.3.6.1.4.1.2879.2.4.2.1.1.2.1.4ColumnsonusDsx3AdmnSlotIndexread-onlycurrentSlot index for this table
1.3.6.1.4.1.2879.2.4.2.1.1.2.1.5ColumnsonusDsx3AdmnPortIndexread-onlycurrentPort index for this table
1.3.6.1.4.1.2879.2.4.2.1.1.2.1.6ColumnsonusDsx3AdmnDs3Indexread-onlycurrentDs3 Index into this table
1.3.6.1.4.1.2879.2.4.2.1.1.2.1.7ColumnsonusDsx3AdmnIfIndexread-onlycurrentDs3 If Index. Same as the If index of the standard table
1.3.6.1.4.1.2879.2.4.2.1.1.2.1.8ColumnsonusDsx3AdmnStateread-writecurrentState of DS3, Enabled/Disabled
1.3.6.1.4.1.2879.2.4.2.1.1.2.1.9ColumnsonusDsx3AdmnTimeoutread-writecurrentMax time in minutes before dryup takes place
1.3.6.1.4.1.2879.2.4.2.1.1.2.1.10ColumnsonusDsx3AdmnModeread-writecurrentDS3 is in service or out of service.
1.3.6.1.4.1.2879.2.4.2.1.1.2.1.11ColumnsonusDsx3AdmnActionread-writecurrentForce out of service or wait for dryup
1.3.6.1.4.1.2879.2.4.2.1.1.2.1.12ColumnsonusDsx3AdmnAvailDs1sread-writecurrentBitstring map of Ds1s that are available on this DS3.
1.3.6.1.4.1.2879.2.4.2.1.1.2.1.13ColumnsonusDsx3AdmnDs1ModeOverrideread-writecurrentThis flag controls whether the mode and state of the DS1's carried in the DS3 are modified when the mode and state of the DS3 is modified. If this flag is set …
1.3.6.1.4.1.2879.2.4.2.1.1.2.1.14ColumnsonusDsx3AdmnInitCountersread-writecurrentUsed to initialize all counters. Once enabled clears all T3 counters.
1.3.6.1.4.1.2879.2.4.2.1.1.2.1.15ColumnsonusDsx3AdmnCircuitIdread-writecurrentThe Circuit Id.
1.3.6.1.4.1.2879.2.4.2.1.2TablesonusDsx3StatTablenot-accessiblecurrentTable of Sonus Enterprise status for all DS3s
1.3.6.1.4.1.2879.2.4.2.1.2.1RowsonusDsx3StatEntrynot-accessiblecurrentEntry in Table consisting of the all the Sonus Enterprise DS3 Status
1.3.6.1.4.1.2879.2.4.2.1.2.1.1ColumnsonusDsx3StatShelfIndexread-onlycurrentShelf index for this table
1.3.6.1.4.1.2879.2.4.2.1.2.1.2ColumnsonusDsx3StatSlotIndexread-onlycurrentSlot index for this table
1.3.6.1.4.1.2879.2.4.2.1.2.1.3ColumnsonusDsx3StatPortIndexread-onlycurrentPort index for this table
1.3.6.1.4.1.2879.2.4.2.1.2.1.4ColumnsonusDsx3StatDs3Indexread-onlycurrentDs3 Index into this table
1.3.6.1.4.1.2879.2.4.2.1.2.1.5ColumnsonusDsx3StatValidIntervalsread-onlycurrentNumber of intervals worth of Performance Data that is valid
1.3.6.1.4.1.2879.2.4.2.1.2.1.6ColumnsonusDsx3StatDs3LCVread-onlycurrentTotal number of line code violations
1.3.6.1.4.1.2879.2.4.2.1.2.1.7ColumnsonusDsx3StatDs3FERRread-onlycurrentTotal number of framing errors
1.3.6.1.4.1.2879.2.4.2.1.2.1.8ColumnsonusDsx3StatDs3EXZSread-onlycurrentTotal number of Excessive zeroes violations
1.3.6.1.4.1.2879.2.4.2.1.2.1.9ColumnsonusDsx3StatDs3PERRread-onlycurrentTotal number of parity errors
1.3.6.1.4.1.2879.2.4.2.1.2.1.10ColumnsonusDsx3StatDs3CPERRread-onlycurrentTotal number of C-Bit parity errors
1.3.6.1.4.1.2879.2.4.2.1.2.1.11ColumnsonusDsx3StatDs3FEBEread-onlycurrentTotal number of FEBE errors
1.3.6.1.4.1.2879.2.4.2.1.2.1.12ColumnsonusDsx3StatDs3AISread-onlycurrentTotal number of AIS errors
1.3.6.1.4.1.2879.2.4.2.1.2.1.13ColumnsonusDsx3StatDs3LOSread-onlycurrentTotal number of Loss of signal errors
1.3.6.1.4.1.2879.2.4.2.1.2.1.14ColumnsonusDsx3StatLineStatStrread-onlycurrentString display for DS3 line status
1.3.6.1.4.1.2879.2.4.2.1.2.1.15ColumnsonusDsx3StatLoopbackStrread-onlycurrentString display for DS3 loopback status
1.3.6.1.4.1.2879.2.4.2.1.2.1.16ColumnsonusDsx3StatOperStatusread-onlycurrentThe actual status of the DS3 interface. Interface is Up if it is administratively in service and there are no line failures or hardware failures. Interface is …
1.3.6.1.4.1.2879.2.4.2.2NodesonusDsx3MIBNotifications
1.3.6.1.4.1.2879.2.4.2.2.0NodesonusDsx3MIBNotificationsPrefix
1.3.6.1.4.1.2879.2.4.2.2.0.1NotificationsonusDsx3AdminChangeNotificationcurrentA sonusDsx3AdminChangeNotification trap indicates the DS3 administration changes.
1.3.6.1.4.1.2879.2.4.2.2.0.2NotificationsonusDsx3OutOfServiceNotificationcurrentA sonusDsx3OutOfServiceNotification trap indicates that a DS3 went out of service. The reason indicates the reason why and type indicates the type of failure.
1.3.6.1.4.1.2879.2.4.2.2.0.3NotificationsonusDsx3ThresholdCrossingNotificationcurrentA sonusDsx3ThresholdCrossingNotification trap indicates that a DS3 threshold has been crossed. The type indicates the type of threshold.
1.3.6.1.4.1.2879.2.4.2.2.0.4NotificationsonusDsx3LineStatusChangeNotificationcurrentA sonusDsx3LineStatusChangeNotification trap indicates the DS3 state changes. It is used to notify DS3 Alarms states
1.3.6.1.4.1.2879.2.4.2.2.1NodesonusDsx3MIBNotificationsObjects
1.3.6.1.4.1.2879.2.4.2.2.1.1ScalarsonusDs3OutOfServiceReasonread-onlycurrentThe reason for DS3 going out of service
1.3.6.1.4.1.2879.2.4.2.2.1.2ScalarsonusDs3OutOfServiceTyperead-onlycurrentThe type of operation which caused DS3 to go out of service
1.3.6.1.4.1.2879.2.4.2.2.1.3ScalarsonusDs3ThresholdTyperead-onlycurrentType of threshold that was crossed which caused a threshold crossing trap
1.3.6.1.4.1.2879.2.4.2.2.1.4ScalarsonusDs3LineStateread-onlycurrentThe type of Alarm or failure which caused DS3 to go out of service
1.3.6.1.4.1.2879.2.4.2.2.1.5ScalarsonusDs3AdmnStateread-onlycurrentThe administrative state of the DS3.