SONUS-NODE-MIB
307 objects
The MIB Module for Node Management.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2879.2.1.1 | IdentitysonusNodeMIB | The MIB Module for Node Management. | ||
| 1.3.6.1.4.1.2879.2.1.1.1 | NodesonusNodeMIBObjects | |||
| 1.3.6.1.4.1.2879.2.1.1.1.1 | NodesonusNode | |||
| 1.3.6.1.4.1.2879.2.1.1.1.1.1 | NodesonusNodeAdmnObjects | |||
| 1.3.6.1.4.1.2879.2.1.1.1.1.1.1 | ScalarsonusNodeAdmnShelves | read-only | current | The number of shelves configured to be present in this node. |
| 1.3.6.1.4.1.2879.2.1.1.1.1.1.2 | ScalarsonusNodeAdmnTelnetLogin | read-write | current | |
| 1.3.6.1.4.1.2879.2.1.1.1.1.2 | NodesonusNodeStatusObjects | |||
| 1.3.6.1.4.1.2879.2.1.1.1.1.2.1 | ScalarsonusNodeStatShelvesPresent | read-only | current | The number of shelves currently present in this node. |
| 1.3.6.1.4.1.2879.2.1.1.1.1.2.2 | ScalarsonusNodeStatNextIfIndex | read-only | current | This MIB object identifies the next ifIndex to use in the creation of an interface. This MIB object directly corresponds to the ifIndex MIB object in the ifTab… |
| 1.3.6.1.4.1.2879.2.1.1.1.1.2.3 | ScalarsonusNodeStatMgmtStatus | read-only | current | Identifies if this node can be effectively managed by a network management system. A value of 'manageable' indicates that it can be; the other values indicate … |
| 1.3.6.1.4.1.2879.2.1.1.1.1.3 | TablesonusNodeShelfAdmnTable | not-accessible | current | This table contains information about each shelf which is configured to be a member of the node. This table describes the configured characteristics of each sh… |
| 1.3.6.1.4.1.2879.2.1.1.1.1.3.1 | RowsonusNodeShelfAdmnEntry | not-accessible | current | This table describes the shelves that are configured as members of the GSX9000 Switch node. |
| 1.3.6.1.4.1.2879.2.1.1.1.1.3.1.1 | ColumnsonusNodeShelfAdmnIndex | read-only | current | Identifies the target shelf in the node. Each node may be compprised of one or more shelves. The maximum number of shelves allowed in a node is six. |
| 1.3.6.1.4.1.2879.2.1.1.1.1.3.1.2 | ColumnsonusNodeShelfAdmnState | read-create | current | The configured state of the target shelf in the node. |
| 1.3.6.1.4.1.2879.2.1.1.1.1.3.1.3 | ColumnsonusNodeShelfAdmnIpaddr1 | read-create | current | The IP Address of the shelf. This value identifies the shelf that may join the node. Each shelf has two IP addresses that it may be reached by. This is the fir… |
| 1.3.6.1.4.1.2879.2.1.1.1.1.3.1.4 | ColumnsonusNodeShelfAdmnIpaddr2 | read-create | current | The IP Address of the shelf. This value identifies the shelf that may join the node. Each shelf has two IP addresses that it may be reached by. This is the sec… |
| 1.3.6.1.4.1.2879.2.1.1.1.1.3.1.5 | ColumnsonusNodeShelfAdmn48VdcAState | read-create | current | The configured state of the shelf's 48 VDC A-power supply. Indicates whether the A supply SHOULD be present. This object is not capable of disabling a connecte… |
| 1.3.6.1.4.1.2879.2.1.1.1.1.3.1.6 | ColumnsonusNodeShelfAdmn48VdcBState | read-create | current | The configured state of the shelf's 48 VDC B-power supply. Indicates whether the B supply SHOULD be present. This object is not capable of disabling a connecte… |
| 1.3.6.1.4.1.2879.2.1.1.1.1.3.1.7 | ColumnsonusNodeShelfAdmnStatus | read-only | current | The status of the indexed shelf in the GSX9000 node. If the value of this object is not accepted(3) or shuttingDown(4), then the objects in Sonus Shelf Status … |
| 1.3.6.1.4.1.2879.2.1.1.1.1.3.1.8 | ColumnsonusNodeShelfAdmnRestart | read-create | current | This object is used to reset a shelf in the node. The object causes the management servers on the indexed shelf to perform the indicated operation. The restart… |
| 1.3.6.1.4.1.2879.2.1.1.1.1.3.1.9 | ColumnsonusNodeShelfAdmnRowStatus | read-create | current | This object indicates the row status for this table. |
| 1.3.6.1.4.1.2879.2.1.1.1.1.4 | TablesonusNodeShelfStatTable | not-accessible | current | This table contains status information about each shelf in the GSX9000 Switch node. Shelves within the node can can be configured before they are physically at… |
| 1.3.6.1.4.1.2879.2.1.1.1.1.4.1 | RowsonusNodeShelfStatEntry | not-accessible | current | This table describes the shelves that are configured as members of the GSX9000 Switch node. |
| 1.3.6.1.4.1.2879.2.1.1.1.1.4.1.1 | ColumnsonusNodeShelfStatIndex | read-only | current | Identifies the target shelf within the node. Returns the same value as sonusNodeShelfStatIndex, the index into this instance. |
| 1.3.6.1.4.1.2879.2.1.1.1.1.4.1.2 | ColumnsonusNodeShelfStatSlots | read-only | current | The number of physical slots present in this shelf. |
| 1.3.6.1.4.1.2879.2.1.1.1.1.4.1.3 | ColumnsonusNodeShelfStatSerialNumber | read-only | current | Identifies the Sonus serial number for this shelf. |
| 1.3.6.1.4.1.2879.2.1.1.1.1.4.1.4 | ColumnsonusNodeShelfStatType | read-only | current | Identifies the Sonus shelf type. A shelf may be either the master shelf for the node, or it may be one of several slave shelves in the node. Every node contain… |
| 1.3.6.1.4.1.2879.2.1.1.1.1.4.1.5 | ColumnsonusNodeShelfStatFan | read-only | current | Identifies the status of the shelf's fan tray. A controllerFailure(2) indicates that the fan status can not be obtained. In that case in can not be determined … |
| 1.3.6.1.4.1.2879.2.1.1.1.1.4.1.6 | ColumnsonusNodeShelfStat48VAStatus | read-only | current | The status of the shelf's 48 VDC A-power supply. |
| 1.3.6.1.4.1.2879.2.1.1.1.1.4.1.7 | ColumnsonusNodeShelfStat48VBStatus | read-only | current | The status of the shelf's 48 VDC B-power supply. |
| 1.3.6.1.4.1.2879.2.1.1.1.1.4.1.8 | ColumnsonusNodeShelfStatBackplane | read-only | current | The hardware type ID of the backplane in this shelf. |
| 1.3.6.1.4.1.2879.2.1.1.1.1.4.1.9 | ColumnsonusNodeShelfStatBootCount | read-only | current | Specifies the number of times that this shelf has been booted. The boot count is specified from the perspective of the active management module running in the … |
| 1.3.6.1.4.1.2879.2.1.1.1.1.4.1.10 | ColumnsonusNodeShelfStatTemperature | read-only | current | Indicates the temperature being sensed at this shelf's intake manifold. The temperature is indicated in Celcius. |
| 1.3.6.1.4.1.2879.2.1.1.1.1.4.1.11 | ColumnsonusNodeShelfStatFanSpeed | read-only | current | Indicates the speed of the fan. |
| 1.3.6.1.4.1.2879.2.1.1.1.1.5 | TablesonusNodeSrvrAdmnTable | not-accessible | current | The server module ADMN table describes the configuration of each server module slot in an indexed shelf. A slot in a shelf, MUST be configured to accept a part… |
| 1.3.6.1.4.1.2879.2.1.1.1.1.5.1 | RowsonusNodeSrvrAdmnEntry | not-accessible | current | |
| 1.3.6.1.4.1.2879.2.1.1.1.1.5.1.1 | ColumnsonusNodeSrvrAdmnShelfIndex | read-only | current | Identifies the target shelf. Returns the same value as sonusNodeShelfStatIndex, which was used to index into this table. |
| 1.3.6.1.4.1.2879.2.1.1.1.1.5.1.2 | ColumnsonusNodeSrvrAdmnSlotIndex | read-only | current | Identifies the target slot within the shelf. |
| 1.3.6.1.4.1.2879.2.1.1.1.1.5.1.3 | ColumnsonusNodeSrvrAdmnHwType | read-write | current | Identifies the type of server module the indexed slot has been configured to accept. Server modules other than this type are rejected by the System Manager. Th… |
| 1.3.6.1.4.1.2879.2.1.1.1.1.5.1.4 | ColumnsonusNodeSrvrAdmnState | read-write | current | A server module must be enabled before System Manager will fully recognize it. The server module must be disabled before the server module can be deleted. |
| 1.3.6.1.4.1.2879.2.1.1.1.1.5.1.5 | ColumnsonusNodeSrvrAdmnMode | read-write | current | A server module which is outOfService will not accept new calls. When taken out of service, its active calls may either be dried up or terminated, depending on… |
| 1.3.6.1.4.1.2879.2.1.1.1.1.5.1.6 | ColumnsonusNodeSrvrAdmnAction | read-write | current | The type of action to perform when a server module is taken out of service. The active calls on the server module can be dried up for a specified dryup limit, … |
| 1.3.6.1.4.1.2879.2.1.1.1.1.5.1.7 | ColumnsonusNodeSrvrAdmnDryupLimit | read-write | current | Server module dryup limit, specified in minutes. If the server module has not dried up by the time this limit expires, the remaining active calls are abruptly … |
| 1.3.6.1.4.1.2879.2.1.1.1.1.5.1.8 | ColumnsonusNodeSrvrAdmnDumpState | read-write | current | Indicates if a server module will create a crashblock file when a critical error which prevents the module from continuing, has occured. |
| 1.3.6.1.4.1.2879.2.1.1.1.1.5.1.9 | ColumnsonusNodeSrvrAdmnRowStatus | read-write | current | Deleting a server module will place that slot in reset. All configuration parameters associated with the server module in this slot are destroyed. |
| 1.3.6.1.4.1.2879.2.1.1.1.1.5.1.10 | ColumnsonusNodeSrvrAdmnRedundancyRole | read-write | current | Specifies the redundancy role this server module will play. This object is required to create a row instance. |
| 1.3.6.1.4.1.2879.2.1.1.1.1.5.1.11 | ColumnsonusNodeSrvrAdmnAdapHwType | read-write | current | Identifies the type of adapter module the indexed slot has been configured to accept. Adapter modules other than this type are rejected by the System Manager. … |
| 1.3.6.1.4.1.2879.2.1.1.1.1.5.1.12 | ColumnsonusNodeSrvrAdmnSpecialFunction | read-write | current | Specifies the logical function for this server module. This object may be specified only at row creation time, but is not required. If not specified, an approp… |
| 1.3.6.1.4.1.2879.2.1.1.1.1.6 | TablesonusNodeSlotTable | not-accessible | current | The node slot table describes |
| 1.3.6.1.4.1.2879.2.1.1.1.1.6.1 | RowsonusNodeSlotEntry | not-accessible | current | |
| 1.3.6.1.4.1.2879.2.1.1.1.1.6.1.1 | ColumnsonusNodeSlotShelfIndex | read-only | current | Identifies the indexed shelf. Returns the same value as sonusNodeShelfStatIndex, which is used to index into this table. |
| 1.3.6.1.4.1.2879.2.1.1.1.1.6.1.2 | ColumnsonusNodeSlotIndex | read-only | current | Identifies the indexed slot within the shelf. |
| 1.3.6.1.4.1.2879.2.1.1.1.1.6.1.3 | ColumnsonusNodeSlotState | read-only | current | Identifies the operational state of the indexed slot in the shelf. |
| 1.3.6.1.4.1.2879.2.1.1.1.1.6.1.4 | ColumnsonusNodeSlotHwType | read-only | current | Identifies the hardware type of the server module which was detected in the slot. Valid only if the sonusNodeSlotState is greater than inserted(2). |
| 1.3.6.1.4.1.2879.2.1.1.1.1.6.1.5 | ColumnsonusNodeSlotHwTypeRev | read-only | current | Identifies the hardware type revision of the server module which was detected in the slot. Valid only if the sonusNodeSlotState is greater than inserted(2). |
| 1.3.6.1.4.1.2879.2.1.1.1.1.6.1.6 | ColumnsonusNodeSlotPower | read-only | current | Identifies the server modules power mode. If the slot state is empty, the power status is unknown(1). |
| 1.3.6.1.4.1.2879.2.1.1.1.1.6.1.7 | ColumnsonusNodeSlotAdapState | read-only | current | Identifies the adapter state of the indexed slot in the shelf. |
| 1.3.6.1.4.1.2879.2.1.1.1.1.6.1.8 | ColumnsonusNodeSlotAdapHwType | read-only | current | Identifies the hardware type of the adapter module which was detected in the slot. Valid only if the sonusNodeSlotAdapState is present(3). |
| 1.3.6.1.4.1.2879.2.1.1.1.1.7 | TablesonusNodeSrvrStatTable | not-accessible | current | The node server status table describes the status of the indexed server module in the node. This table is unavailable if the sonusNodeShelfStatStatus object in… |
| 1.3.6.1.4.1.2879.2.1.1.1.1.7.1 | RowsonusNodeSrvrStatEntry | not-accessible | current | |
| 1.3.6.1.4.1.2879.2.1.1.1.1.7.1.1 | ColumnsonusNodeSrvrStatShelfIndex | read-only | current | Identifies the target shelf. Returns the same value as sonusNodeShelfStatIndex, which was used to index into this table. |
| 1.3.6.1.4.1.2879.2.1.1.1.1.7.1.2 | ColumnsonusNodeSrvrStatSlotIndex | read-only | current | Identifies the target slot within the shelf. |
| 1.3.6.1.4.1.2879.2.1.1.1.1.7.1.3 | ColumnsonusNodeSrvrStatMiddVersion | read-only | current | Identifies the version of the MIDD EEPROM on this server module. |
| 1.3.6.1.4.1.2879.2.1.1.1.1.7.1.4 | ColumnsonusNodeSrvrStatHwType | read-only | current | Identifies the type of server module in the indexed slot. |
| 1.3.6.1.4.1.2879.2.1.1.1.1.7.1.5 | ColumnsonusNodeSrvrStatSerialNum | read-only | current | Identifies the serial number of the server module. This is the serial number assigned to the server module at manufacture. |
| 1.3.6.1.4.1.2879.2.1.1.1.1.7.1.6 | ColumnsonusNodeSrvrStatPartNum | read-only | current | Identifies the part number of the module. This is the part number assigned to the module at manufacture. |
| 1.3.6.1.4.1.2879.2.1.1.1.1.7.1.7 | ColumnsonusNodeSrvrStatPartNumRev | read-only | current | Identifies the manufacture part number revision level of the server module. |
| 1.3.6.1.4.1.2879.2.1.1.1.1.7.1.8 | ColumnsonusNodeSrvrStatMfgDate | read-only | current | The date this server module assembly was manufactured. |
| 1.3.6.1.4.1.2879.2.1.1.1.1.7.1.9 | ColumnsonusNodeSrvrStatFlashVersion | read-only | current | Identifies the version of the firmware within the non-volatile FLASH device on this server module. |
| 1.3.6.1.4.1.2879.2.1.1.1.1.7.1.10 | ColumnsonusNodeSrvrStatSwVersion | read-only | current | Identifies the version of the runtime software application this is currently executing on this server module. |
| 1.3.6.1.4.1.2879.2.1.1.1.1.7.1.11 | ColumnsonusNodeSrvrStatBuildNum | read-only | current | Identifies the build number of this software version. |
| 1.3.6.1.4.1.2879.2.1.1.1.1.7.1.12 | ColumnsonusNodeSrvrStatMode | read-only | current | Identifies the operational status of the module in the indexed slot. |
| 1.3.6.1.4.1.2879.2.1.1.1.1.7.1.13 | ColumnsonusNodeSrvrStatTemperature | read-only | current | Indicates the current Celcius temperature being sensed by the server module in the indexed slot. |
| 1.3.6.1.4.1.2879.2.1.1.1.1.7.1.14 | ColumnsonusNodeSrvrStatMemUtilization | read-only | current | The current memory utilization of this server module. The value returned is a number from 0 to 100, representing the percentage of memory utilization. Note tha… |
| 1.3.6.1.4.1.2879.2.1.1.1.1.7.1.15 | ColumnsonusNodeSrvrStatCpuUtilization | read-only | current | The current CPU utilization of this server module. The value returned is a number from 0 to 100, representing the percentage of CPU utilization. |
| 1.3.6.1.4.1.2879.2.1.1.1.1.7.1.16 | ColumnsonusNodeSrvrStatHwTypeRev | read-only | current | The hardware type revision number of this server module. |
| 1.3.6.1.4.1.2879.2.1.1.1.1.7.1.17 | ColumnsonusNodeSrvrStatSwVersionCode | read-only | current | Octet string that identifies the version of the runtime software application that is currently executing on this server module: Byte(s) Code 0 major version 1 … |
| 1.3.6.1.4.1.2879.2.1.1.1.1.7.1.18 | ColumnsonusNodeSrvrStatEpldRev | read-only | current | The EPLD revision level of this server module. An overall number which represents the total level of the server module. |
| 1.3.6.1.4.1.2879.2.1.1.1.1.7.1.19 | ColumnsonusNodeSrvrStatHostName | read-only | current | Identifies the host name that software load of this module had been built on. |
| 1.3.6.1.4.1.2879.2.1.1.1.1.7.1.20 | ColumnsonusNodeSrvrStatUserName | read-only | current | Identifies the user who builds software load of this module. |
| 1.3.6.1.4.1.2879.2.1.1.1.1.7.1.21 | ColumnsonusNodeSrvrStatViewName | read-only | current | Identifies the viewName used for software build. |
| 1.3.6.1.4.1.2879.2.1.1.1.1.7.1.22 | ColumnsonusNodeSrvrStatTotalMem | read-only | current | Indicates the total memory size of the server module. |
| 1.3.6.1.4.1.2879.2.1.1.1.1.7.1.23 | ColumnsonusNodeSrvrStatFreeMem | read-only | current | Indicates the total memory available on the server module. |
| 1.3.6.1.4.1.2879.2.1.1.1.1.7.1.24 | ColumnsonusNodeSrvrStatTotalSharedMem | read-only | current | Indicates the total shared memory size of the server module. |
| 1.3.6.1.4.1.2879.2.1.1.1.1.7.1.25 | ColumnsonusNodeSrvrStatFreeSharedMem | read-only | current | Indicates the total shared memory available on the server module. |
| 1.3.6.1.4.1.2879.2.1.1.1.1.11 | TablesonusNodeAdapStatTable | not-accessible | current | The node adapter status table describes the status of the indexed adapter module in the node. This table is unavailable if the sonusNodeSlotAdapState object in… |
| 1.3.6.1.4.1.2879.2.1.1.1.1.11.1 | RowsonusNodeAdapStatEntry | not-accessible | current | |
| 1.3.6.1.4.1.2879.2.1.1.1.1.11.1.1 | ColumnsonusNodeAdapStatShelfIndex | read-only | current | Identifies the target shelf. |
| 1.3.6.1.4.1.2879.2.1.1.1.1.11.1.2 | ColumnsonusNodeAdapStatSlotIndex | read-only | current | Identifies the target slot within the shelf. |
| 1.3.6.1.4.1.2879.2.1.1.1.1.11.1.3 | ColumnsonusNodeAdapStatMiddVersion | read-only | current | Identifies the version of the MIDD EEPROM on this adapter module. |
| 1.3.6.1.4.1.2879.2.1.1.1.1.11.1.4 | ColumnsonusNodeAdapStatHwType | read-only | current | Identifies the type of adapter module in the indexed slot. |
| 1.3.6.1.4.1.2879.2.1.1.1.1.11.1.5 | ColumnsonusNodeAdapStatHwTypeRev | read-only | current | Identifies the hardware type revision of the adapter module detected in the slot. |
| 1.3.6.1.4.1.2879.2.1.1.1.1.11.1.6 | ColumnsonusNodeAdapStatSerialNum | read-only | current | Identifies the serial number of the adapter module. This is the serial number assigned to the card at manufacture. |
| 1.3.6.1.4.1.2879.2.1.1.1.1.11.1.7 | ColumnsonusNodeAdapStatPartNum | read-only | current | Identifies the part number of the adapter module. This is the part number assigned to the card at manufacture. |
| 1.3.6.1.4.1.2879.2.1.1.1.1.11.1.8 | ColumnsonusNodeAdapStatPartNumRev | read-only | current | Identifies the assembly revision level of the adapter module. |
| 1.3.6.1.4.1.2879.2.1.1.1.1.11.1.9 | ColumnsonusNodeAdapStatMfgDate | read-only | current | The date this adapter module was manufactured. |
| 1.3.6.1.4.1.2879.2.1.1.1.1.12 | TablesonusNodeSlotAdmnTable | not-accessible | current | The node slot admn table provides physical manipulation of a slot location in a shelf. |
| 1.3.6.1.4.1.2879.2.1.1.1.1.12.1 | RowsonusNodeSlotAdmnEntry | not-accessible | current | |
| 1.3.6.1.4.1.2879.2.1.1.1.1.12.1.1 | ColumnsonusNodeSlotAdmnShelfIndex | read-only | current | Identifies the target shelf. |
| 1.3.6.1.4.1.2879.2.1.1.1.1.12.1.2 | ColumnsonusNodeSlotAdmnSlotIndex | read-only | current | Identifies the target slot within the shelf. |
| 1.3.6.1.4.1.2879.2.1.1.1.1.12.1.3 | ColumnsonusNodeSlotAdmnReset | read-write | current | Setting this object to reset(2) or coredump(3), will physically reset the server module installed in the indexed slot. This object always reads as undefined(1)… |
| 1.3.6.1.4.1.2879.2.1.1.1.2 | NodesonusNvsConfig | |||
| 1.3.6.1.4.1.2879.2.1.1.1.2.1 | TablesonusNvsConfigTable | not-accessible | current | This table specifies the Boot Parameters that apply only to the MNS present in the indexed shelf and slot. The Boot Parameters can only be accessed if the shel… |
| 1.3.6.1.4.1.2879.2.1.1.1.2.1.1 | RowsonusNvsConfigEntry | not-accessible | current | |
| 1.3.6.1.4.1.2879.2.1.1.1.2.1.1.1 | ColumnsonusBparamShelfIndex | read-only | current | Identifies the target shelf. This object returns the value of sonusNodeShelfStatIndex which was used to index into this table. |
| 1.3.6.1.4.1.2879.2.1.1.1.2.1.1.2 | ColumnsonusBparamUnused | not-accessible | current | Unused |
| 1.3.6.1.4.1.2879.2.1.1.1.2.1.1.3 | ColumnsonusBparamPasswd | read-write | current | The secure password which is used to access the Boot PROM menu subsystem. This object is not available through SNMP. |
| 1.3.6.1.4.1.2879.2.1.1.1.2.1.1.4 | ColumnsonusBparamIpAddrSlot1Port0 | read-write | current | The IP address assigned to the field service port. This port is not intended for customer use. |
| 1.3.6.1.4.1.2879.2.1.1.1.2.1.1.5 | ColumnsonusBparamIpMaskSlot1Port0 | read-write | current | The IP Address Mask assigned to the field service port. |
| 1.3.6.1.4.1.2879.2.1.1.1.2.1.1.6 | ColumnsonusBparamIpGatewaySlot1Port0 | read-write | current | The default IP Gateway address used by the field service port. |
| 1.3.6.1.4.1.2879.2.1.1.1.2.1.1.7 | ColumnsonusBparamIfSpeedTypeSlot1Port0 | read-write | current | The default link speed setting used by the field service port. |
| 1.3.6.1.4.1.2879.2.1.1.1.2.1.1.8 | ColumnsonusBparamIpAddrSlot1Port1 | read-write | current | The IP address assigned to management port number one. |
| 1.3.6.1.4.1.2879.2.1.1.1.2.1.1.9 | ColumnsonusBparamIpMaskSlot1Port1 | read-write | current | The IP address mask used by management port one. |
| 1.3.6.1.4.1.2879.2.1.1.1.2.1.1.10 | ColumnsonusBparamIpGatewaySlot1Port1 | read-write | current | The default IP Gateway address used by management port one. |
| 1.3.6.1.4.1.2879.2.1.1.1.2.1.1.11 | ColumnsonusBparamIfSpeedTypeSlot1Port1 | read-write | current | The default link speed setting used by management port one. |
| 1.3.6.1.4.1.2879.2.1.1.1.2.1.1.12 | ColumnsonusBparamIpAddrSlot1Port2 | read-write | current | The IP address assigned to management port number two. |
| 1.3.6.1.4.1.2879.2.1.1.1.2.1.1.13 | ColumnsonusBparamIpMaskSlot1Port2 | read-write | current | The IP address mask used by management port two. |
| 1.3.6.1.4.1.2879.2.1.1.1.2.1.1.14 | ColumnsonusBparamIpGatewaySlot1Port2 | read-write | current | The default gateway address used by management port two. |
| 1.3.6.1.4.1.2879.2.1.1.1.2.1.1.15 | ColumnsonusBparamIfSpeedTypeSlot1Port2 | read-write | current | The default link speed setting used by management port two. |
| 1.3.6.1.4.1.2879.2.1.1.1.2.1.1.16 | ColumnsonusBparamIpAddrSlot2Port0 | read-write | current | The IP address assigned to the field service port. This port is not intended for customer use. |
| 1.3.6.1.4.1.2879.2.1.1.1.2.1.1.17 | ColumnsonusBparamIpMaskSlot2Port0 | read-write | current | The IP Address Mask assigned to the field service port. |
| 1.3.6.1.4.1.2879.2.1.1.1.2.1.1.18 | ColumnsonusBparamIpGatewaySlot2Port0 | read-write | current | The default IP Gateway address used by the field service port. |
| 1.3.6.1.4.1.2879.2.1.1.1.2.1.1.19 | ColumnsonusBparamIfSpeedTypeSlot2Port0 | read-write | current | The default link speed setting used by the field service port. |
| 1.3.6.1.4.1.2879.2.1.1.1.2.1.1.20 | ColumnsonusBparamIpAddrSlot2Port1 | read-write | current | The IP address assigned to management port number one. |
| 1.3.6.1.4.1.2879.2.1.1.1.2.1.1.21 | ColumnsonusBparamIpMaskSlot2Port1 | read-write | current | The IP address mask used by management port one. |
| 1.3.6.1.4.1.2879.2.1.1.1.2.1.1.22 | ColumnsonusBparamIpGatewaySlot2Port1 | read-write | current | The default IP Gateway address used by management port one. |
| 1.3.6.1.4.1.2879.2.1.1.1.2.1.1.23 | ColumnsonusBparamIfSpeedTypeSlot2Port1 | read-write | current | The default link speed setting used by management port one. |
| 1.3.6.1.4.1.2879.2.1.1.1.2.1.1.24 | ColumnsonusBparamIpAddrSlot2Port2 | read-write | current | The IP address assigned to management port number two. |
| 1.3.6.1.4.1.2879.2.1.1.1.2.1.1.25 | ColumnsonusBparamIpMaskSlot2Port2 | read-write | current | The IP address mask used by management port two. |
| 1.3.6.1.4.1.2879.2.1.1.1.2.1.1.26 | ColumnsonusBparamIpGatewaySlot2Port2 | read-write | current | The default gateway address used by management port two. |
| 1.3.6.1.4.1.2879.2.1.1.1.2.1.1.27 | ColumnsonusBparamIfSpeedTypeSlot2Port2 | read-write | current | The default link speed setting used by management port two. |
| 1.3.6.1.4.1.2879.2.1.1.1.2.1.1.28 | ColumnsonusBparamBootDelay | read-write | current | The amount of delay used to allow an administrator to gain access to the NVS configuration menus before the runtime software is loaded. The delay is specified … |
| 1.3.6.1.4.1.2879.2.1.1.1.2.1.1.29 | ColumnsonusBparamCoreState | read-write | current | Specifies whether core dumps are enabled. If core dumps are disabled, a fatal software fault will result in a reboot without the overhead of performing the cor… |
| 1.3.6.1.4.1.2879.2.1.1.1.2.1.1.30 | ColumnsonusBparamCoreLevel | read-write | current | Specifies the type of core dump behavior the shelf will display. Under normal(1) behavior, the server modules will execute a core dump only for fatal software … |
| 1.3.6.1.4.1.2879.2.1.1.1.2.1.1.31 | ColumnsonusBparamBaudRate | read-write | current | The baud rate of a management port's physical interface. |
| 1.3.6.1.4.1.2879.2.1.1.1.2.1.1.32 | ColumnsonusBparamNfsPrimary | read-write | current | The IP Address of the primary NFS Server for this switch. |
| 1.3.6.1.4.1.2879.2.1.1.1.2.1.1.33 | ColumnsonusBparamNfsSecondary | read-write | current | The IP Address of the secondary NFS Server for this switch. |
| 1.3.6.1.4.1.2879.2.1.1.1.2.1.1.34 | ColumnsonusBparamNfsMountPri | read-write | current | The NFS mount point exported by the Primary NFS server. |
| 1.3.6.1.4.1.2879.2.1.1.1.2.1.1.35 | ColumnsonusBparamNfsMountSec | read-write | current | The NFS mount point exported by the Secondary NFS server. |
| 1.3.6.1.4.1.2879.2.1.1.1.2.1.1.36 | ColumnsonusBparamNfsPathUpgrade | read-write | current | The name of the temporary load path override. This path is tried before the sonusBparamNfsPathLoad when specified. If the sonusBparamNfsPathUpgrade fails to co… |
| 1.3.6.1.4.1.2879.2.1.1.1.2.1.1.37 | ColumnsonusBparamNfsPathLoad | read-write | current | The directory, beneath the exported NFS mount point, which contains the switch's operational directories. |
| 1.3.6.1.4.1.2879.2.1.1.1.2.1.1.38 | ColumnsonusBparamPrimName | read-write | current | The primary load file name for this server module. |
| 1.3.6.1.4.1.2879.2.1.1.1.2.1.1.39 | ColumnsonusBparamSecName | read-write | current | The secondary load file name for this server module. The secondary file is tried when the primary file can not be opened or read. |
| 1.3.6.1.4.1.2879.2.1.1.1.2.1.1.40 | ColumnsonusBparamMasterState | read-write | current | Specifies whether this shelf will participate in the node as a master shelf, or as a slave shelf. Each node contains exactly one master shelf, and may contain … |
| 1.3.6.1.4.1.2879.2.1.1.1.2.1.1.41 | ColumnsonusBparamParamMode | read-write | current | Specifies the binary parameter file mode of the node. This mode specifies whether the node will attempt to load a binary parameter file. The paramMode can be s… |
| 1.3.6.1.4.1.2879.2.1.1.1.2.1.1.42 | ColumnsonusBparamCliScript | read-write | current | The name of the CLI script which will be run automatically when the switch intentionally boots with default parameters. The switch will intentionally boot with… |
| 1.3.6.1.4.1.2879.2.1.1.1.2.1.1.43 | ColumnsonusBparamUId | read-write | current | The UNIX user ID used for all file accesses on both the primary and secondary NFS servers. |
| 1.3.6.1.4.1.2879.2.1.1.1.2.1.1.44 | ColumnsonusBparamGrpId | read-write | current | The UNIX group ID used for all file accesses on both the primary and secondary NFS servers. |
| 1.3.6.1.4.1.2879.2.1.1.1.2.1.1.45 | ColumnsonusBparamCoreDumpLimit | read-write | current | Indicates the maximum number of core dump files which can be created on behalf of a Server which is requesting a core dump. Setting the value to zero indicates… |
| 1.3.6.1.4.1.2879.2.1.1.1.2.1.1.46 | ColumnsonusBparamNfsPathSoftware | read-write | current | The name of the software load path. This path is is appended to the Boot Path. This object may be NULL, in which case the software is loaded directly from the … |
| 1.3.6.1.4.1.2879.2.1.1.1.2.2 | TablesonusFlashConfigTable | not-accessible | current | This table specifies the FLASH Update parameters for the indexed server module. The Boot Firmware for each server module is contained in the FLASH device. It i… |
| 1.3.6.1.4.1.2879.2.1.1.1.2.2.1 | RowsonusFlashConfigEntry | not-accessible | current | |
| 1.3.6.1.4.1.2879.2.1.1.1.2.2.1.1 | ColumnsonusFlashAdmnShelfIndex | read-only | current | Identifies the target shelf within the node. |
| 1.3.6.1.4.1.2879.2.1.1.1.2.2.1.2 | ColumnsonusFlashAdmnSlotIndex | read-only | current | Identifies the target slot within the shelf. |
| 1.3.6.1.4.1.2879.2.1.1.1.2.2.1.3 | ColumnsonusFlashAdmnUpdateButton | read-write | current | Initiate the update of the specified server module's FLASH PROM now. This object always reads as the value update(1). |
| 1.3.6.1.4.1.2879.2.1.1.1.2.3 | TablesonusFlashStatusTable | not-accessible | current | This table specifies the status of the FLASH Update process. |
| 1.3.6.1.4.1.2879.2.1.1.1.2.3.1 | RowsonusFlashStatusEntry | not-accessible | current | |
| 1.3.6.1.4.1.2879.2.1.1.1.2.3.1.1 | ColumnsonusFlashStatShelfIndex | read-only | current | Identifies the target shelf within the node. |
| 1.3.6.1.4.1.2879.2.1.1.1.2.3.1.2 | ColumnsonusFlashStatSlotIndex | read-only | current | Identifies the target slot within the shelf. |
| 1.3.6.1.4.1.2879.2.1.1.1.2.3.1.3 | ColumnsonusFlashStatState | read-only | current | The current state of the FLASH update process on the target server module. |
| 1.3.6.1.4.1.2879.2.1.1.1.2.3.1.4 | ColumnsonusFlashStatLastStatus | read-only | current | The status of the last FLASH update that was executed. |
| 1.3.6.1.4.1.2879.2.1.1.1.3 | NodesonusUser | |||
| 1.3.6.1.4.1.2879.2.1.1.1.3.1 | NodesonusUserList | |||
| 1.3.6.1.4.1.2879.2.1.1.1.3.1.1 | ScalarsonusUserListNextIndex | read-only | current | The next valid index to use when creating a new sonusUserListEntry |
| 1.3.6.1.4.1.2879.2.1.1.1.3.1.2 | TablesonusUserListTable | not-accessible | current | This table specifies the user access list for the node. |
| 1.3.6.1.4.1.2879.2.1.1.1.3.1.2.1 | RowsonusUserListEntry | not-accessible | current | |
| 1.3.6.1.4.1.2879.2.1.1.1.3.1.2.1.1 | ColumnsonusUserListIndex | read-only | current | Identifies the target user list entry. |
| 1.3.6.1.4.1.2879.2.1.1.1.3.1.2.1.2 | ColumnsonusUserListState | read-write | current | The administrative state of this user entry. |
| 1.3.6.1.4.1.2879.2.1.1.1.3.1.2.1.3 | ColumnsonusUserListUserName | read-write | current | The user name of this user. |
| 1.3.6.1.4.1.2879.2.1.1.1.3.1.2.1.4 | ColumnsonusUserListProfileName | read-write | current | The name of the profile applied to this user entry. |
| 1.3.6.1.4.1.2879.2.1.1.1.3.1.2.1.5 | ColumnsonusUserListPasswd | read-write | current | The password for this user. |
| 1.3.6.1.4.1.2879.2.1.1.1.3.1.2.1.6 | ColumnsonusUserListComment | read-write | current | A comment that is associated with this user. |
| 1.3.6.1.4.1.2879.2.1.1.1.3.1.2.1.7 | ColumnsonusUserListAccess | read-write | current | The priviledge level of this user. |
| 1.3.6.1.4.1.2879.2.1.1.1.3.1.2.1.8 | ColumnsonusUserListRowStatus | read-write | current | Row status object for this table. |
| 1.3.6.1.4.1.2879.2.1.1.1.3.1.3 | TablesonusUserListStatusTable | not-accessible | current | This table specifies status of the user access list for the node. |
| 1.3.6.1.4.1.2879.2.1.1.1.3.1.3.1 | RowsonusUserListStatusEntry | not-accessible | current | |
| 1.3.6.1.4.1.2879.2.1.1.1.3.1.3.1.1 | ColumnsonusUserListStatusIndex | not-accessible | current | Identifies the target user list status entry. |
| 1.3.6.1.4.1.2879.2.1.1.1.3.1.3.1.2 | ColumnsonusUserListStatusLastConfigChange | read-only | current | Octet string that identifies the GMT timestamp of last successful SET PDU from this CLI user. field octects contents range 1 1-2 year 0..65536 2 3 month 1..12 … |
| 1.3.6.1.4.1.2879.2.1.1.1.3.2 | NodesonusUserProfile | |||
| 1.3.6.1.4.1.2879.2.1.1.1.3.2.1 | ScalarsonusUserProfileNextIndex | read-only | current | The next valid index to use when creating an entry in the sonusUserProfileTable. |
| 1.3.6.1.4.1.2879.2.1.1.1.3.2.2 | TablesonusUserProfileTable | not-accessible | current | This table specifies the user access list for the node. |
| 1.3.6.1.4.1.2879.2.1.1.1.3.2.2.1 | RowsonusUserProfileEntry | not-accessible | current | |
| 1.3.6.1.4.1.2879.2.1.1.1.3.2.2.1.1 | ColumnsonusUserProfileIndex | read-only | current | Identifies the target profile entry. |
| 1.3.6.1.4.1.2879.2.1.1.1.3.2.2.1.2 | ColumnsonusUserProfileName | read-write | current | The name of this user profile. This object is required to create the table entry. |
| 1.3.6.1.4.1.2879.2.1.1.1.3.2.2.1.3 | ColumnsonusUserProfileUserState | read-write | current | The administrative state of this profiled user entry. |
| 1.3.6.1.4.1.2879.2.1.1.1.3.2.2.1.4 | ColumnsonusUserProfileUserPasswd | read-write | current | The password for the profiled user entry. |
| 1.3.6.1.4.1.2879.2.1.1.1.3.2.2.1.5 | ColumnsonusUserProfileUserComment | read-write | current | The comment that is associated with the profiled user entry. |
| 1.3.6.1.4.1.2879.2.1.1.1.3.2.2.1.6 | ColumnsonusUserProfileUserAccess | read-write | current | The priviledge level of the profiled user entry. |
| 1.3.6.1.4.1.2879.2.1.1.1.3.2.2.1.7 | ColumnsonusUserProfileUserCommentState | read-write | current | Indicates whether the sonusUserProfileUserComment object is present in this user profile. |
| 1.3.6.1.4.1.2879.2.1.1.1.3.2.2.1.8 | ColumnsonusUserProfileUserPasswdState | read-write | current | Indicates whether the sonusUserProfileUserPasswd object is present in this user profile. |
| 1.3.6.1.4.1.2879.2.1.1.1.3.2.2.1.9 | ColumnsonusUserProfileUserAccessState | read-write | current | Indicates whether the sonusUserProfileUserAccess object is present in this user profile. |
| 1.3.6.1.4.1.2879.2.1.1.1.3.2.2.1.10 | ColumnsonusUserProfileUserStateState | read-write | current | Indicates whether the sonusUserProfileUserState object is present in this user profile. |
| 1.3.6.1.4.1.2879.2.1.1.1.3.2.2.1.11 | ColumnsonusUserProfileRowStatus | read-write | current | |
| 1.3.6.1.4.1.2879.2.1.1.1.4 | NodesonusSwLoad | |||
| 1.3.6.1.4.1.2879.2.1.1.1.4.1 | TablesonusSwLoadTable | not-accessible | current | This table specifies the hardware type based software load table for the server modules in the node. |
| 1.3.6.1.4.1.2879.2.1.1.1.4.1.1 | RowsonusSwLoadEntry | not-accessible | current | |
| 1.3.6.1.4.1.2879.2.1.1.1.4.1.1.1 | ColumnsonusSwLoadAdmnIndex | read-only | current | Identifies the target software load entry. |
| 1.3.6.1.4.1.2879.2.1.1.1.4.1.1.2 | ColumnsonusSwLoadAdmnImageName | read-write | current | Identifies the name of the image to load for the hardware type identified by sonusSwLoadAdmnHwType. |
| 1.3.6.1.4.1.2879.2.1.1.1.4.1.1.3 | ColumnsonusSwLoadAdmnHwType | read-write | current | Identifies the target hardware type for the load image. This object can only be written at row creation. |
| 1.3.6.1.4.1.2879.2.1.1.1.4.1.1.4 | ColumnsonusSwLoadAdmnRowStatus | read-write | current | The RowStatus object for this row. |
| 1.3.6.1.4.1.2879.2.1.1.1.4.2 | TablesonusSwLoadSpecTable | not-accessible | current | This table specifies the hardware type based software load table for the server modules in the node. |
| 1.3.6.1.4.1.2879.2.1.1.1.4.2.1 | RowsonusSwLoadSpecEntry | not-accessible | current | |
| 1.3.6.1.4.1.2879.2.1.1.1.4.2.1.1 | ColumnsonusSwLoadSpecAdmnShelfIndex | read-only | current | Identifies the target shelf for this load entry entry. |
| 1.3.6.1.4.1.2879.2.1.1.1.4.2.1.2 | ColumnsonusSwLoadSpecAdmnSlotIndex | read-only | current | Identifies the target slot within the chassis for this load entry. |
| 1.3.6.1.4.1.2879.2.1.1.1.4.2.1.3 | ColumnsonusSwLoadSpecAdmnImageName | read-write | current | Identifies the name of the image to load. |
| 1.3.6.1.4.1.2879.2.1.1.1.4.2.1.4 | ColumnsonusSwLoadSpecAdmnRowStatus | read-write | current | The RowStatus object for this row. |
| 1.3.6.1.4.1.2879.2.1.1.1.5 | NodesonusParam | |||
| 1.3.6.1.4.1.2879.2.1.1.1.5.1 | NodesonusParamStatusObjects | |||
| 1.3.6.1.4.1.2879.2.1.1.1.5.1.1 | ScalarsonusParamSaveSeqNumber | read-only | current | The parameter save sequence number assigned to this parameter file. |
| 1.3.6.1.4.1.2879.2.1.1.1.5.1.2 | ScalarsonusParamSaveTimeStart | read-only | current | The system uptime, measured in milliseconds, when the last parameter save cycle started. |
| 1.3.6.1.4.1.2879.2.1.1.1.5.1.3 | ScalarsonusParamSaveTimeStop | read-only | current | The system uptime, measured in milliseconds, when the last parameter save cycle ended. |
| 1.3.6.1.4.1.2879.2.1.1.1.5.1.4 | ScalarsonusParamSaveDuration | read-only | current | The measured time in milliseconds to complete the last parameter save cycle. |
| 1.3.6.1.4.1.2879.2.1.1.1.5.1.5 | ScalarsonusParamSaveTotalBytes | read-only | current | The number of bytes contained in the last binary parameter file saved. |
| 1.3.6.1.4.1.2879.2.1.1.1.5.1.6 | ScalarsonusParamSaveTotalRecords | read-only | current | The number of individual parameter records contained in the last binary parameter file saved. |
| 1.3.6.1.4.1.2879.2.1.1.1.5.1.7 | ScalarsonusParamSaveFilename | read-only | current | Identifies the name of the image to load for the hardware type identified by sonusSwLoadAdmnHwType. |
| 1.3.6.1.4.1.2879.2.1.1.1.5.1.8 | ScalarsonusParamSaveState | read-only | current | The current state of the active Management Server's parameter saving process. |
| 1.3.6.1.4.1.2879.2.1.1.1.5.1.9 | ScalarsonusParamLoadServer | read-only | current | The IP Address of the NFS server from which parameters were loaded from. |
| 1.3.6.1.4.1.2879.2.1.1.1.5.1.10 | ScalarsonusParamLoadFileType | read-only | current | The type of binary parameter which was loaded. Under normal circumstances, the primary(1) parameter file will always be loaded. When default parameters are use… |
| 1.3.6.1.4.1.2879.2.1.1.1.5.1.11 | ScalarsonusParamLoadStatus | read-only | current | Indicates the status of the last binary parameter file load. The value defaults(1) indicates that parameters were not loaded and that the node began with defau… |
| 1.3.6.1.4.1.2879.2.1.1.1.5.1.12 | ScalarsonusParamLoadSeqNumber | read-only | current | |
| 1.3.6.1.4.1.2879.2.1.1.1.5.1.13 | ScalarsonusParamLoadTotalRecords | read-only | current | |
| 1.3.6.1.4.1.2879.2.1.1.1.5.1.14 | ScalarsonusParamLoadTotalBytes | read-only | current | |
| 1.3.6.1.4.1.2879.2.1.1.1.5.1.15 | ScalarsonusParamLoadDuration | read-only | current | |
| 1.3.6.1.4.1.2879.2.1.1.1.5.1.16 | ScalarsonusParamLoadSerialNum | read-only | current | Identifies the serial number of the node which created the parameter file loaded by this node. |
| 1.3.6.1.4.1.2879.2.1.1.1.5.1.17 | ScalarsonusParamSavePrimarySrvrState | read-only | current | The current state of parameter saving to this NFS server. |
| 1.3.6.1.4.1.2879.2.1.1.1.5.1.18 | ScalarsonusParamSavePrimarySrvrReason | read-only | current | The failure code associated with the last parameter save pass to this NFS server. |
| 1.3.6.1.4.1.2879.2.1.1.1.5.1.19 | ScalarsonusParamSaveSecondarySrvrState | read-only | current | The current state of parameter saving to this NFS server. |
| 1.3.6.1.4.1.2879.2.1.1.1.5.1.20 | ScalarsonusParamSaveSecondarySrvrReason | read-only | current | The failure code associated with the last parameter save pass to this NFS server. |
| 1.3.6.1.4.1.2879.2.1.1.1.5.1.21 | ScalarsonusParamLastSaveTime | read-only | current | Octet string that identifies the GMT timestamp of last successful PIF write. field octects contents range 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5… |
| 1.3.6.1.4.1.2879.2.1.1.1.5.2 | NodesonusParamAdminObject | |||
| 1.3.6.1.4.1.2879.2.1.1.1.5.2.1 | ScalarsonusParamAdmnMaxIncrPifs | read-write | current | The maximum of Incremental PIF files saved per NFS server |
| 1.3.6.1.4.1.2879.2.1.1.1.6 | NodesonusNfs | |||
| 1.3.6.1.4.1.2879.2.1.1.1.6.1 | TablesonusNfsAdmnTable | not-accessible | current | This table specifies the configurable NFS options for each MNS in each shelf. |
| 1.3.6.1.4.1.2879.2.1.1.1.6.1.1 | RowsonusNfsAdmnEntry | not-accessible | current | |
| 1.3.6.1.4.1.2879.2.1.1.1.6.1.1.1 | ColumnsonusNfsAdmnShelfIndex | read-only | current | Identifies the target shelf. This object returns the value of sonusNodeShelfStatIndex which was used to index into this table. |
| 1.3.6.1.4.1.2879.2.1.1.1.6.1.1.2 | ColumnsonusNfsAdmnSlotIndex | read-only | current | Identifies the target MNS module slot within the shelf. |
| 1.3.6.1.4.1.2879.2.1.1.1.6.1.1.3 | ColumnsonusNfsAdmnMountServer | read-write | current | Mounts the Primary or Secondary NFS server using mount parameters obtained from the NVS Boot parameters sonusBparamNfsPrimary or sonusBparamNfsSecondary, and s… |
| 1.3.6.1.4.1.2879.2.1.1.1.6.1.1.4 | ColumnsonusNfsAdmnUnmountServer | read-write | current | Unmounts the standby NFS server. Note: unmounting this server will disrupt any file I/O currently taking place on it. Continuous retries will occur until the u… |
| 1.3.6.1.4.1.2879.2.1.1.1.6.1.1.5 | ColumnsonusNfsAdmnToggleActiveServer | read-write | current | Toggles the Active NFS server between the Primary and Secondary, provided both servers are currently mounted. This object is always read as noop(1). |
| 1.3.6.1.4.1.2879.2.1.1.1.6.1.1.6 | ColumnsonusNfsAdmnSetWritable | read-write | current | Clears the perception of a read-only condition on the Primary or Secondary NFS server, so that server will be considered viable as the Active server. This obje… |
| 1.3.6.1.4.1.2879.2.1.1.1.6.2 | TablesonusNfsStatTable | not-accessible | current | This table specifies NFS status objects for each MNS in each shelf. |
| 1.3.6.1.4.1.2879.2.1.1.1.6.2.1 | RowsonusNfsStatEntry | not-accessible | current | |
| 1.3.6.1.4.1.2879.2.1.1.1.6.2.1.1 | ColumnsonusNfsStatShelfIndex | read-only | current | Identifies the target shelf. This object returns the value of sonusNodeShelfStatIndex which was used to index into this table. |
| 1.3.6.1.4.1.2879.2.1.1.1.6.2.1.2 | ColumnsonusNfsStatSlotIndex | read-only | current | Identifies the target MNS module slot within the shelf. |
| 1.3.6.1.4.1.2879.2.1.1.1.6.2.1.7 | ColumnsonusNfsStatPrimaryStatus | read-only | current | Indicates the mount status of the Primary NFS server: mounted and functioning properly, attemping to mount, indefinitely unmounted, attempting to unmount, moun… |
| 1.3.6.1.4.1.2879.2.1.1.1.6.2.1.8 | ColumnsonusNfsStatSecondaryStatus | read-only | current | Indicates the mount status of the Secondary NFS server: mounted and functioning properly, attemping to mount, indefinitely unmounted, attempting to unmount, mo… |
| 1.3.6.1.4.1.2879.2.1.1.1.6.2.1.9 | ColumnsonusNfsStatActiveServer | read-only | current | Indicates the current Active NFS server. This may change due to NFS failures or NFS administrative operations. |
| 1.3.6.1.4.1.2879.2.1.1.1.6.2.1.10 | ColumnsonusNfsStatStandbyServer | read-only | current | Indicates the current Standby NFS server. This may change due to NFS failures or NFS administrative operations. |
| 1.3.6.1.4.1.2879.2.1.1.1.6.2.1.11 | ColumnsonusNfsStatPrimaryIP | read-only | current | The IP Address of the currently mounted Primary NFS server. This may differ from the NVS settings if the user modified sonusBparamNfsPrimary without unmounting… |
| 1.3.6.1.4.1.2879.2.1.1.1.6.2.1.12 | ColumnsonusNfsStatSecondaryIP | read-only | current | The IP Address of the currently mounted Secondary NFS server. This may differ from the NVS settings if the user modified sonusBparamNfsSecondary without unmoun… |
| 1.3.6.1.4.1.2879.2.1.1.1.6.2.1.13 | ColumnsonusNfsStatPrimaryMount | read-only | current | The mount point currently in use on the Primary NFS server. This may differ from the NVS settings if the user modified sonusBparamNfsMountPri without unmountin… |
| 1.3.6.1.4.1.2879.2.1.1.1.6.2.1.14 | ColumnsonusNfsStatSecondaryMount | read-only | current | The mount point currently in use on the Secondary NFS server. This may differ from the NVS settings if the user modified sonusBparamNfsMountSec without unmount… |
| 1.3.6.1.4.1.2879.2.1.1.1.6.2.1.15 | ColumnsonusNfsStatPrimaryLastError | read-only | current | Last consequential error received from the Primary NFS server. This object is reset to none(1) if the server is remounted. |
| 1.3.6.1.4.1.2879.2.1.1.1.6.2.1.16 | ColumnsonusNfsStatSecondaryLastError | read-only | current | Last consequential error received from the Secondary NFS server. This object is reset to none(1) if the server is remounted. |
| 1.3.6.1.4.1.2879.2.1.1.2 | NodesonusNodeMIBNotifications | |||
| 1.3.6.1.4.1.2879.2.1.1.2.0 | NodesonusNodeMIBNotificationsPrefix | |||
| 1.3.6.1.4.1.2879.2.1.1.2.0.1 | NotificationsonusNodeShelfPowerA48VdcNormalNotification | current | A sonusShelfPowerA48VdcNormal trap indicates that 48V DC source A is operating normally for the specified shelf. | |
| 1.3.6.1.4.1.2879.2.1.1.2.0.2 | NotificationsonusNodeShelfPowerB48VdcNormalNotification | current | A sonusShelfPowerB48VdcNormal trap indicates that 48V DC source B is operating normally for the specified shelf. | |
| 1.3.6.1.4.1.2879.2.1.1.2.0.3 | NotificationsonusNodeShelfPowerA48VdcFailureNotification | current | A sonusShelfPowerA48VdcFailure trap indicates that 48V DC source A has failed for the specified shelf. | |
| 1.3.6.1.4.1.2879.2.1.1.2.0.4 | NotificationsonusNodeShelfPowerB48VdcFailureNotification | current | A sonusShelfPowerB48VdcFailure trap indicates that 48V DC source A has failed for the specified shelf. | |
| 1.3.6.1.4.1.2879.2.1.1.2.0.5 | NotificationsonusNodeShelfFanTrayFailureNotification | current | A sonusNodeShelfFanTrayFailure trap indicates that the fan controller on the specified shelf is indicating a problem. The Event Log should be examined for more… | |
| 1.3.6.1.4.1.2879.2.1.1.2.0.6 | NotificationsonusNodeShelfFanTrayOperationalNotification | current | A sonusNodeShelfFanTrayOperational trap indicates that the fan controller is fully operational on the specified shelf. | |
| 1.3.6.1.4.1.2879.2.1.1.2.0.7 | NotificationsonusNodeShelfFanTrayRemovedNotification | current | A sonusNodeShelfFanTrayRemoved trap indicates that the fan tray has been removed from the specified shelf. The fan tray should be replaced as soon as possible … | |
| 1.3.6.1.4.1.2879.2.1.1.2.0.8 | NotificationsonusNodeShelfFanTrayPresentNotification | current | A sonusNodeShelfFanTrayPresent trap indicates that a fan tray is present for the specified shelf. | |
| 1.3.6.1.4.1.2879.2.1.1.2.0.9 | NotificationsonusNodeShelfIntakeTempWarningNotification | current | A sonusNodeShelfIntakeTempWarning trap indicates that the intake temperature of the specified shelf has exceeded 45C degrees. | |
| 1.3.6.1.4.1.2879.2.1.1.2.0.10 | NotificationsonusNodeServerTempWarningNotification | current | A sonusNodeServerTempWarning trap indicates that the operating temperature of the specified shelf and slot has exceeded 60C degrees. | |
| 1.3.6.1.4.1.2879.2.1.1.2.0.11 | NotificationsonusNodeServerTempFailureNotification | current | A sonusNodeServerTempFailure trap indicates that the operating temperature of the specified shelf and slot has exceeded 70C degrees. A server module operating … | |
| 1.3.6.1.4.1.2879.2.1.1.2.0.12 | NotificationsonusNodeServerTempNormalNotification | current | A sonusNodeServerTempNormal trap indicates that the operating temperature of the specified shelf and slot has is below 60C degrees. | |
| 1.3.6.1.4.1.2879.2.1.1.2.0.13 | NotificationsonusNodeServerInsertedNotification | current | A sonusNodeServerInserted trap indicates that a server module has been inserted in the specified shelf and slot. | |
| 1.3.6.1.4.1.2879.2.1.1.2.0.14 | NotificationsonusNodeServerRemovedNotification | current | A sonusNodeServerRemoved trap indicates that a server module has been removed from the specified shelf and slot. | |
| 1.3.6.1.4.1.2879.2.1.1.2.0.15 | NotificationsonusNodeServerResetNotification | current | A sonusNodeServerReset trap indicates that the server module in the specified shelf and slot has been reset. | |
| 1.3.6.1.4.1.2879.2.1.1.2.0.16 | NotificationsonusNodeServerOperationalNotification | current | A sonusNodeServerOperational trap indicates that the booting and initialization has completed successfully for the server module in the specified shelf and slo… | |
| 1.3.6.1.4.1.2879.2.1.1.2.0.17 | NotificationsonusNodeServerPowerFailureNotification | current | A sonusNodeServerPowerFailure trap indicates that a power failure has been detected for the server module in the specified shelf and slot. | |
| 1.3.6.1.4.1.2879.2.1.1.2.0.18 | NotificationsonusNodeServerSoftwareFailureNotification | current | A sonusNodeServerSoftwareFailure trap indicates that a software failure has occurred or the server module in the specified shelf and slot. The EventLog should … | |
| 1.3.6.1.4.1.2879.2.1.1.2.0.19 | NotificationsonusNodeServerHardwareFailureNotification | current | A sonusNodeServerHardwareFailure trap indicates that a hardware failure has occurred or the server module in the specified shelf and slot. The EventLog should … | |
| 1.3.6.1.4.1.2879.2.1.1.2.0.20 | NotificationsonusNodeAdapterInsertedNotification | current | A sonusNodeAdapterInserted trap indicates that an adapter module has been inserted in the specified shelf and slot. | |
| 1.3.6.1.4.1.2879.2.1.1.2.0.21 | NotificationsonusNodeAdapterRemovedNotification | current | A sonusNodeAdpaterRemoved trap indicates that an adapter module has been removed from the specified shelf and slot. | |
| 1.3.6.1.4.1.2879.2.1.1.2.0.22 | NotificationsonusNodeMtaInsertedNotification | current | A sonusNodeMtaInserted trap indicates that a Management Timing Adapter has been inserted in the specified shelf and slot. | |
| 1.3.6.1.4.1.2879.2.1.1.2.0.23 | NotificationsonusNodeMtaRemovedNotification | current | A sonusNodeMtaRemoved trap indicates that a Management Timing Adapter has been removed from the specified shelf and slot. | |
| 1.3.6.1.4.1.2879.2.1.1.2.0.24 | NotificationsonusNodeEthernetActiveNotification | current | A sonusNodeEthernetActive trap indicates that an Ethernet link is active for the specified shelf, slot and port. | |
| 1.3.6.1.4.1.2879.2.1.1.2.0.25 | NotificationsonusNodeEthernetInactiveNotification | current | A sonusNodeEthernetInactive trap indicates that an Ethernet link is inactive for the specified shelf, slot and port. | |
| 1.3.6.1.4.1.2879.2.1.1.2.0.26 | NotificationsonusNodeEthernetDegradedNotification | current | A sonusNodeEthernetDegraded trap indicates that an Ethernet link is detecting network errors for the specified shelf, slot and port. The EventLog should be vie… | |
| 1.3.6.1.4.1.2879.2.1.1.2.0.27 | NotificationsonusNodeBootNotification | current | The Management Node Server module, in the node's master shelf, has begun the Node Boot process. | |
| 1.3.6.1.4.1.2879.2.1.1.2.0.28 | NotificationsonusNodeSlaveShelfBootNotification | current | The Management Node Server module, in a node's slave shelf, has begun the Node Boot process. | |
| 1.3.6.1.4.1.2879.2.1.1.2.0.29 | NotificationsonusNodeNfsServerSwitchoverNotification | current | Indicates that the Active NFS server has switched over to the Standby for the specified reason on the MNS in the given shelf and slot. The NFS server specified… | |
| 1.3.6.1.4.1.2879.2.1.1.2.0.30 | NotificationsonusNodeNfsServerOutOfServiceNotification | current | Indicates that the NFS server specified went out-of-service for the reason provided on the MNS in the given shelf and slot. If it was the result of a server fa… | |
| 1.3.6.1.4.1.2879.2.1.1.2.0.31 | NotificationsonusNodeNfsServerInServiceNotification | current | Indicates that the NFS server specified came in-service for the reason provided on the MNS in the given shelf and slot. The Active/Standby role assumed by the … | |
| 1.3.6.1.4.1.2879.2.1.1.2.0.32 | NotificationsonusNodeNfsServerNotWritableNotification | current | Indicates that the NFS server specified is no longer writable by the MNS in the given shelf and slot. The error code received is provided. | |
| 1.3.6.1.4.1.2879.2.1.1.2.0.33 | NotificationsonusNodeServerDisabledNotification | current | The server modules administrative state has been set to disabled. | |
| 1.3.6.1.4.1.2879.2.1.1.2.0.34 | NotificationsonusNodeServerEnabledNotification | current | The server modules administrative state has been set to enabled. | |
| 1.3.6.1.4.1.2879.2.1.1.2.0.35 | NotificationsonusNodeServerDeletedNotification | current | The server module has been deleted from the node's configuration. All configuration data associated with the server module has been deleted. | |
| 1.3.6.1.4.1.2879.2.1.1.2.0.36 | NotificationsonusParamBackupLoadNotification | current | The backup parameter file was loaded. This indicates that the primary parameter file was lost or corrupted. The backup parameter file may contain data which is… | |
| 1.3.6.1.4.1.2879.2.1.1.2.0.37 | NotificationsonusParamCorruptionNotification | current | The binary parameter inspected was corrupted. The indicated file was skipped due to corruption. This trap is only transmitted if a valid backup parameter file … | |
| 1.3.6.1.4.1.2879.2.1.1.2.0.38 | NotificationsonusNodeAdapterMissingNotification | current | A sonusNodeAdpaterMissing trap indicates that an adapter module has not been detected in a specific shelf and slot. | |
| 1.3.6.1.4.1.2879.2.1.1.2.0.39 | NotificationsonusNodeAdapterFailureNotification | current | A sonusNodeAdpaterFailure trap indicates that an adapter module has been detected but is not operational. | |
| 1.3.6.1.4.1.2879.2.1.1.2.0.40 | NotificationsonusNodeSlotResetNotification | current | A sonusNodeSlotReset trap indicates that a server module in the designated slot was reset. | |
| 1.3.6.1.4.1.2879.2.1.1.2.0.41 | NotificationsonusNodeParamWriteCompleteNotification | current | A sonusNodeParamWriteComplete trap indicates that NFS server successfully complete PIF write. | |
| 1.3.6.1.4.1.2879.2.1.1.2.0.42 | NotificationsonusNodeParamWriteErrorNotification | current | A sonusNodeParamWriteError trap indicates that error occured during PIF write. | |
| 1.3.6.1.4.1.2879.2.1.1.2.0.43 | NotificationsonusNodeBootMnsActiveNotification | current | The Management Node Server module in the specified shelf and slot has become active following a Node Boot. | |
| 1.3.6.1.4.1.2879.2.1.1.2.0.44 | NotificationsonusNodeShelfIntakeTempNormalNotification | current | A sonusNodeShelfIntakeTempNormal trap indicates that the intake temperature of the specified shelf is at or below 45C degrees. | |
| 1.3.6.1.4.1.2879.2.1.1.2.1 | NodesonusNodeMIBNotificationsObjects | |||
| 1.3.6.1.4.1.2879.2.1.1.2.1.1 | ScalarsonusNfsServer | read-only | current | The NFS server referred to by the trap. |
| 1.3.6.1.4.1.2879.2.1.1.2.1.2 | ScalarsonusNfsRole | read-only | current | Role assumed by the NFS server referred to by the trap. |
| 1.3.6.1.4.1.2879.2.1.1.2.1.3 | ScalarsonusNfsServerIp | read-only | current | The IP address of the NFS server referred to by the trap. |
| 1.3.6.1.4.1.2879.2.1.1.2.1.4 | ScalarsonusNfsServerMount | read-only | current | The mount point used on the NFS server referred to by the trap. |
| 1.3.6.1.4.1.2879.2.1.1.2.1.5 | ScalarsonusNfsReason | read-only | current | The reason for the generation of the trap - administrative operation (mount, unmount, or toggle), server failure, server not writable, or server recovery. |
| 1.3.6.1.4.1.2879.2.1.1.2.1.6 | ScalarsonusNfsErrorCode | read-only | current | The NFS error that occurred. |