SONUS-SYSTEM-TIMING-MIB
78 objects
The MIB Module for System Timing management.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2879.2.1.3 | IdentitysonusSystemTimingMIB | The MIB Module for System Timing management. | ||
| 1.3.6.1.4.1.2879.2.1.3.1 | NodesonusSystemTimingMIBObjects | |||
| 1.3.6.1.4.1.2879.2.1.3.1.1 | TablesonusStShelfAdmnTable | not-accessible | current | |
| 1.3.6.1.4.1.2879.2.1.3.1.1.1 | RowsonusStShelfAdmnEntry | not-accessible | current | |
| 1.3.6.1.4.1.2879.2.1.3.1.1.1.1 | ColumnsonusStShelfAdmnShelfIndex | read-only | current | Identifies the target shelf within the node. |
| 1.3.6.1.4.1.2879.2.1.3.1.1.1.2 | ColumnsonusStShelfAdmnFailoverGuardTime | read-write | current | Indicates how long a timing source can be faulting before switchover to another source is initiated |
| 1.3.6.1.4.1.2879.2.1.3.1.1.1.3 | ColumnsonusStShelfAdmnRecoveryGuardTime | read-write | current | Indicates how long a timing source must be valid for, after it has faulted, before it will be considered valid again. |
| 1.3.6.1.4.1.2879.2.1.3.1.1.1.4 | ColumnsonusStShelfAdmnTransmitRemoteAlarm | read-write | current | Not Supported |
| 1.3.6.1.4.1.2879.2.1.3.1.1.1.5 | ColumnsonusStShelfAdmnRevertRefSwitching | read-write | current | If enabled, then a timing source which has failed, but then becomes valid again, will be reconsidered for use. If disabled, then once a timing source fails, it… |
| 1.3.6.1.4.1.2879.2.1.3.1.1.1.6 | ColumnsonusStShelfAdmnRevertMtaSwitching | read-write | current | If enabled, then an MTA which is hot-inserted will automatically be brought on line and made available for use. If disabled, then an MTA which is hot-inserted … |
| 1.3.6.1.4.1.2879.2.1.3.1.1.1.7 | ColumnsonusStShelfAdmnRevertInsertDelay | read-write | current | MTA warm-up period. When an MTA is hot-inserted, the card will be allowed to warm up and stabilize for this amount of time before being put back into service. … |
| 1.3.6.1.4.1.2879.2.1.3.1.1.1.8 | ColumnsonusStShelfAdmnFreeRunAlarm | read-write | current | Not Supported |
| 1.3.6.1.4.1.2879.2.1.3.1.1.1.9 | ColumnsonusStShelfAdmnTimingSourceAction | read-write | current | Resequence will cause the timing sequence list to be re-evaluated. This may cause the current active timing source to change. |
| 1.3.6.1.4.1.2879.2.1.3.1.1.1.10 | ColumnsonusStShelfAdmnRowStatus | read-write | current | This object indicates the row status for this table. |
| 1.3.6.1.4.1.2879.2.1.3.1.1.1.11 | ColumnsonusStShelfAdmnSourceReconfigAlg | read-write | current | This object indicates which algorithm should be used to select timing sources for use as System Synchronized sources. Selecting Ordered_list causes sources to … |
| 1.3.6.1.4.1.2879.2.1.3.1.1.1.12 | ColumnsonusStShelfAdmnMtaSourceAffinity | read-write | current | This object works in conjunction with the Source Reconfiguration Algorithm object. If sticky is selected, System Timing Manager will exhaust oll timing sources… |
| 1.3.6.1.4.1.2879.2.1.3.1.2 | TablesonusStShelfStatTable | not-accessible | current | |
| 1.3.6.1.4.1.2879.2.1.3.1.2.1 | RowsonusStShelfStatEntry | not-accessible | current | |
| 1.3.6.1.4.1.2879.2.1.3.1.2.1.1 | ColumnsonusStShelfStatShelfIndex | read-only | current | |
| 1.3.6.1.4.1.2879.2.1.3.1.2.1.2 | ColumnsonusStShelfStatActiveMtaSlot | read-only | current | Identifies which MTA is providing the System Synchronized Timing signal. |
| 1.3.6.1.4.1.2879.2.1.3.1.2.1.3 | ColumnsonusStShelfStatActiveSource | read-only | current | Identifies what timing source the active MTA is using to provide System Synchronized Timing. |
| 1.3.6.1.4.1.2879.2.1.3.1.3 | TablesonusStMtaAdmnTable | not-accessible | current | |
| 1.3.6.1.4.1.2879.2.1.3.1.3.1 | RowsonusStMtaAdmnEntry | not-accessible | current | |
| 1.3.6.1.4.1.2879.2.1.3.1.3.1.1 | ColumnsonusStMtaAdmnShelfIndex | read-only | current | Identifies the target shelf within the node. |
| 1.3.6.1.4.1.2879.2.1.3.1.3.1.2 | ColumnsonusStMtaAdmnMtaSlotIndex | read-only | current | Identifies the target slot within the shelf. |
| 1.3.6.1.4.1.2879.2.1.3.1.3.1.3 | ColumnsonusStMtaAdmnState | read-write | current | If enabled, the MTA can participate in system timing. If disabled, then it will be removed from service and not allowed to participate. All timing sequence ent… |
| 1.3.6.1.4.1.2879.2.1.3.1.3.1.4 | ColumnsonusStMtaAdmnLineEncoding | read-write | current | Select AMI or B8ZS line coding for BITS LIU. Select HDB3 for SETS LIU |
| 1.3.6.1.4.1.2879.2.1.3.1.3.1.5 | ColumnsonusStMtaAdmnSsmChannelBit | read-write | current | MTA 20, E1 support only. Identifies which of the additional spare bits, embedded within the framing pattern, contains the SSM channel |
| 1.3.6.1.4.1.2879.2.1.3.1.3.1.6 | ColumnsonusStMtaAdmnFramerMode | read-write | current | Select ESF or D4/SF for BITS framer. ESF should be selected if B8ZS has been selected for the line encoding. D4/SF should be selected if AMI has been selected … |
| 1.3.6.1.4.1.2879.2.1.3.1.3.1.7 | ColumnsonusStMtaAdmnFramerTransmitYellowAlarm | read-write | current | Not supported |
| 1.3.6.1.4.1.2879.2.1.3.1.3.1.8 | ColumnsonusStMtaAdmnLiuTransmitAllOnes | read-write | current | Not supported |
| 1.3.6.1.4.1.2879.2.1.3.1.3.1.9 | ColumnsonusStMtaAdmnAction | read-write | current | Selecting AVAILABLE will cause the MTA to be moved from the Out-Of-Service state to the Available-For-Use state. This command is necessary to manually make an … |
| 1.3.6.1.4.1.2879.2.1.3.1.3.1.10 | ColumnsonusStMtaAdmnRowStatus | read-write | current | This object indicates the row status for this table. |
| 1.3.6.1.4.1.2879.2.1.3.1.4 | TablesonusStMtaStatTable | not-accessible | current | |
| 1.3.6.1.4.1.2879.2.1.3.1.4.1 | RowsonusStMtaStatEntry | not-accessible | current | |
| 1.3.6.1.4.1.2879.2.1.3.1.4.1.1 | ColumnsonusStMtaStatShelfIndex | read-only | current | |
| 1.3.6.1.4.1.2879.2.1.3.1.4.1.2 | ColumnsonusStMtaStatMtaSlotIndex | read-only | current | |
| 1.3.6.1.4.1.2879.2.1.3.1.4.1.3 | ColumnsonusStMtaStatOperStat | read-only | current | Indicates the operational status of the MTA |
| 1.3.6.1.4.1.2879.2.1.3.1.4.1.4 | ColumnsonusStMtaStatMtaHwDesc | read-only | current | Description of the MTA hardware in the form of 'hwtype_hwRev'. |
| 1.3.6.1.4.1.2879.2.1.3.1.4.1.5 | ColumnsonusStMtaStatMtaHwType | read-only | current | Description of the MTA hardware Type only. Entry 5+6 obsolete entry 4. |
| 1.3.6.1.4.1.2879.2.1.3.1.4.1.6 | ColumnsonusStMtaStatMtaHwTypeRev | read-only | current | Description of the MTA hardware type revision. Entry 5+6 obsolete entry 4. |
| 1.3.6.1.4.1.2879.2.1.3.1.4.1.7 | ColumnsonusStMtaStatMtaSerialNum | read-only | current | Identifies the serial number of the server module. This is the serial number assigned to the mta module in manufacturing. |
| 1.3.6.1.4.1.2879.2.1.3.1.4.1.8 | ColumnsonusStMtaStatMtaPartNum | read-only | current | Identifies the part number of the server module. This is the part number assigned to the mta module in manufacturing. |
| 1.3.6.1.4.1.2879.2.1.3.1.5 | TablesonusStTimingSourceTable | not-accessible | current | |
| 1.3.6.1.4.1.2879.2.1.3.1.5.1 | RowsonusStTimingSourceEntry | not-accessible | current | |
| 1.3.6.1.4.1.2879.2.1.3.1.5.1.1 | ColumnsonusStTimingSourceShelfIndex | read-write | current | |
| 1.3.6.1.4.1.2879.2.1.3.1.5.1.2 | ColumnsonusStTimingSourceMtaSlotIndex | read-write | current | Indicates which MTA this timing node is bound to. |
| 1.3.6.1.4.1.2879.2.1.3.1.5.1.3 | ColumnsonusStTimingSource | read-write | current | Indicates which physical timing source is bound to this node. External BITS sources are used by MTA 10's, in T1 based chassis'. External SETS sources are used … |
| 1.3.6.1.4.1.2879.2.1.3.1.5.1.4 | ColumnsonusStTimingSourceState | read-write | current | If enabled, the source can participate in system timing. If disabled, then it will be removed from service and not be allowed to participate. |
| 1.3.6.1.4.1.2879.2.1.3.1.5.1.5 | ColumnsonusStTimingSourceSequenceNum | read-write | current | The timing sequence number is automatically generated |
| 1.3.6.1.4.1.2879.2.1.3.1.5.1.6 | ColumnsonusStTimingSourceAction | read-write | current | Selecting AVAILABLE will cause the timing source to be moved from the Out-Of-Service state to the Available-For-Use state. This command is necessary to manuall… |
| 1.3.6.1.4.1.2879.2.1.3.1.5.1.7 | ColumnsonusStTimingSourceRowStatus | read-write | current | This object indicates the row status for this table. |
| 1.3.6.1.4.1.2879.2.1.3.1.6 | TablesonusStTimingSourceStatTable | not-accessible | current | |
| 1.3.6.1.4.1.2879.2.1.3.1.6.1 | RowsonusStTimingSourceStatEntry | not-accessible | current | |
| 1.3.6.1.4.1.2879.2.1.3.1.6.1.1 | ColumnsonusStTimingSourceStatShelfIndex | read-only | current | Indicates shelf. |
| 1.3.6.1.4.1.2879.2.1.3.1.6.1.2 | ColumnsonusStTimingSourceStatMtaSlotIndex | read-only | current | Indicates which MTA this timing node is bound to. |
| 1.3.6.1.4.1.2879.2.1.3.1.6.1.3 | ColumnsonusStTimingSourceStat | read-only | current | Indicates the physical timing source |
| 1.3.6.1.4.1.2879.2.1.3.1.6.1.4 | ColumnsonusStTimingSourceStatState | read-only | current | Indicates the current overall state of the timing source, including the hardware state, adminitrative mode and shelf configuration |
| 1.3.6.1.4.1.2879.2.1.3.1.6.1.5 | ColumnsonusStTimingSourceStatTraceability | read-only | current | Indicates the Quality Level of the System Synchronized Timing Source |
| 1.3.6.1.4.1.2879.2.1.3.1.6.1.6 | ColumnsonusStTimingSourceStatLineState | read-only | current | Indicates the current physical status of the timing source |
| 1.3.6.1.4.1.2879.2.1.3.1.7 | TablesonusStChannelBindingTable | not-accessible | current | This table describes how derived timing sources should be mapped to the MTA hardware |
| 1.3.6.1.4.1.2879.2.1.3.1.7.1 | RowsonusStChannelBindingEntry | not-accessible | current | |
| 1.3.6.1.4.1.2879.2.1.3.1.7.1.1 | ColumnsonusStChannelBindingShelfIndex | read-only | current | |
| 1.3.6.1.4.1.2879.2.1.3.1.7.1.2 | ColumnsonusStChannelBindingSlotIndex | read-only | current | Server slot number to provide a recovered clock source. The same server can be configured to provide both possible recovered clocks as long as different channe… |
| 1.3.6.1.4.1.2879.2.1.3.1.7.1.3 | ColumnsonusStChannelBindingChannel | read-only | current | T1/E1 span or OC12 port number to provide the recovered clock source. T1 span range is 1-12(CNS10), 1-28(CNS30), E1 span range is 1-8(CNS20), OC12 port number(… |
| 1.3.6.1.4.1.2879.2.1.3.1.7.1.4 | ColumnsonusStChannelBindingRefClk | read-only | current | Backplane signal the recovered clock source should be bound to. Each REFCLK must only be bound to a single Server slot/span. |
| 1.3.6.1.4.1.2879.2.1.3.1.7.1.5 | ColumnsonusStChannelBindingRowStatus | read-write | current | This object indicates the row status for this table. |
| 1.3.6.1.4.1.2879.2.1.3.2 | NodesonusSystemTimingMIBNotifications | |||
| 1.3.6.1.4.1.2879.2.1.3.2.0 | NodesonusSystemTimingMIBNotificationsPrefix | |||
| 1.3.6.1.4.1.2879.2.1.3.2.0.1 | NotificationsonusSystemTimingActiveFailedNotification | current | This trap indicates that the currently active System Timing clock source has failed. | |
| 1.3.6.1.4.1.2879.2.1.3.2.0.2 | NotificationsonusSystemTimingActiveSwitchoverNotification | current | This trap indicates that the active System Timing clock source has been switched to another source. | |
| 1.3.6.1.4.1.2879.2.1.3.2.0.3 | NotificationsonusSystemTimingOscillatorActiveNotification | current | This trap indicates that all external sources of System Timing have failed and that the current source of timing is the MTA's internal oscillator. | |
| 1.3.6.1.4.1.2879.2.1.3.2.0.4 | NotificationsonusSystemTimingMTAFailedNotification | current | This trap indicates that the MTA indicated has failed or been removed from the shelf. | |
| 1.3.6.1.4.1.2879.2.1.3.2.0.6 | NotificationsonusSystemTimingMTAOperationalNotification | current | This trap indicates that the specified MTA is now operational. | |
| 1.3.6.1.4.1.2879.2.1.3.2.0.7 | NotificationsonusSystemTimingMTATotalFailureNotification | current | This trap indicates that no MTA's are available for use to provide System Timing. They have either failed, been removed from service or been removed from the s… | |
| 1.3.6.1.4.1.2879.2.1.3.2.1 | NodesonusSystemTimingMIBNotificationsObjects | |||
| 1.3.6.1.4.1.2879.2.1.3.2.1.1 | ScalarsonusTimingSource | read-only | current | |
| 1.3.6.1.4.1.2879.2.1.3.2.1.2 | ScalarsonusTimingSource2 | read-only | current |