SPP-OPT-MIB
97 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter enterprises Gauge |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.449 | Nodecodex | |||
| 1.3.6.1.4.1.449.2 | NodecdxProductSpecific | |||
| 1.3.6.1.4.1.449.2.1 | Nodecdx6500 | |||
| 1.3.6.1.4.1.449.2.1.2 | Nodecdx6500Configuration | |||
| 1.3.6.1.4.1.449.2.1.2.1 | Nodecdx6500CfgProtocolGroup | |||
| 1.3.6.1.4.1.449.2.1.2.1.1 | Nodecdx6500PCTPortProtocolGroup | |||
| 1.3.6.1.4.1.449.2.1.2.1.1.30 | Tablecdx6500PPCTSPPPortTable | not-accessible | mandatory | This table contains the SPP Port configuration parameters. |
| 1.3.6.1.4.1.449.2.1.2.1.1.30.1 | Rowcdx6500PPCTSPPPortEntry | not-accessible | mandatory | Entries in the SPP Port Configuration Table. |
| 1.3.6.1.4.1.449.2.1.2.1.1.30.1.1 | Columncdx6500SPPPCfgPortNum | read-only | mandatory | Port Number of this port. |
| 1.3.6.1.4.1.449.2.1.2.1.1.30.1.2 | Columncdx6500SPPPCfgPortType | read-only | mandatory | Port Type of the port. |
| 1.3.6.1.4.1.449.2.1.2.1.1.30.1.3 | Columncdx6500SPPPCfgPortSpeed | read-only | mandatory | This is the speed of the port in bits per second. speed300 : 300 bits per second speed600 : 600 bits per second speed1200 : 1200 bits per second speed1800 : 18… |
| 1.3.6.1.4.1.449.2.1.2.1.1.30.1.4 | Columncdx6500SPPPCfgInterchTimeout | read-only | mandatory | This indicates the maximum time period allowed between received characters. time50 : maximum time period allowed 50 seconds. time100 : maximum time period allo… |
| 1.3.6.1.4.1.449.2.1.2.1.1.30.1.5 | Columncdx6500SPPPCfgSLCNum | read-only | mandatory | This specifies the SLC (Smart Line Controller) the port is connected to. |
| 1.3.6.1.4.1.449.2.1.2.1.1.30.1.6 | Columncdx6500SPPPCfgSLCLineNum | read-only | mandatory | This specifies the line on the SLC (Smart Line Controller) the port is connected to. |
| 1.3.6.1.4.1.449.2.1.2.1.1.30.1.7 | Columncdx6500SPPPCfgStnIDList | read-only | mandatory | List of station identifiers the port will support. A range of station numbers can be entered, for example : 1, 6, 8-12, 250-255 indicates 1, 6, 8, 9, 10, 11, 1… |
| 1.3.6.1.4.1.449.2.1.2.1.1.30.1.8 | Columncdx6500SPPPCfgProtocolID | read-only | mandatory | The Protocol Identifier is the first four bytes of the call user data. The default is: 0x11, 0x9F, 0xA7, 0x46. |
| 1.3.6.1.4.1.449.2.1.2.1.1.30.1.9 | Columncdx6500SPPPCfgQueueSize | read-only | mandatory | This specifies the size of the queue which will be used to store the packets to be forwarded to SLC (Smart Line Controller). |
| 1.3.6.1.4.1.449.2.1.2.1.1.30.1.10 | Columncdx6500SPPPCfgBlockingThresh | read-only | mandatory | This specifies the blocking threshold for the queue being used by the SPP. |
| 1.3.6.1.4.1.449.2.1.2.1.1.30.1.11 | Columncdx6500SPPPCfgUnblockThresh | read-only | mandatory | This specifies the unblocking threshold for the queue being used by the SPP. |
| 1.3.6.1.4.1.449.2.1.2.1.1.30.1.12 | Columncdx6500SPPPCfgElectricalInterfaceType | read-only | mandatory | Specify the Electrical Interface Type: V.24 - V.24 Electrical Interface Type V.35 - V.35 Electrical Interface Type V.36 - V.36 Electrical Interface Type X.21 -… |
| 1.3.6.1.4.1.449.2.1.2.1.1.30.1.13 | Columncdx6500SPPPCfgV24ElectricalInterfaceOption | read-only | mandatory | Specify the Pin 22 option: RI - V.24 uses Pin 22 for Ring Indicator output signal TM - V.24 uses Pin 22 for Test Mode input signal |
| 1.3.6.1.4.1.449.2.1.2.1.1.30.1.14 | Columncdx6500SPPPCfgHighSpeedElectricalInterfaceOption | read-only | mandatory | Specify the cable type: NONE - V.35/V.36/X.21 DCE with straight through cable XOVER - V.35/V.36/X.21 DCE with crossover adapter cable |
| 1.3.6.1.4.1.449.2.1.2.1.3 | Nodecdx6500PCTStationProtocolGroup | |||
| 1.3.6.1.4.1.449.2.1.3 | Nodecdx6500Statistics | |||
| 1.3.6.1.4.1.449.2.1.3.1 | Nodecdx6500StatProtocolGroup | |||
| 1.3.6.1.4.1.449.2.1.3.1.1 | Nodecdx6500PSTPortProtocolGroup | |||
| 1.3.6.1.4.1.449.2.1.3.1.1.31 | Tablecdx6500PPSTSPPPStatsTable | not-accessible | mandatory | This table contains the SPP Port Statistics Parameters. |
| 1.3.6.1.4.1.449.2.1.3.1.1.31.1 | Rowcdx6500PPSTSPPPStatEntry | not-accessible | mandatory | Entries in the SPP Port Statistics Table. |
| 1.3.6.1.4.1.449.2.1.3.1.1.31.1.1 | Columncdx6500SPPPStatPortNum | read-only | mandatory | Port Number of this port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.31.1.2 | Columncdx6500SPPPStatPortStatus | read-only | mandatory | This indicates the operational status of the port. disabled : port is disabled enabled : port is enabled busyOut : busy out the port up : port is up down : por… |
| 1.3.6.1.4.1.449.2.1.3.1.1.31.1.3 | Columncdx6500SPPPStatPortType | read-only | mandatory | This indicates the type of access protocol for this port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.31.1.4 | Columncdx6500SPPPStatPortSpeed | read-only | mandatory | This indicates the port speed in bits per second. speed300 : 300 bits per second speed600 : 600 bits per second speed1200 : 1200 bits per second speed1800 : 18… |
| 1.3.6.1.4.1.449.2.1.3.1.1.31.1.5 | Columncdx6500SPPPStatPortUtilIn | read-only | mandatory | This indicates the port utilization for the line to port direction. |
| 1.3.6.1.4.1.449.2.1.3.1.1.31.1.6 | Columncdx6500SPPPStatPortUtilOut | read-only | mandatory | This indicates the port utilization for the port to line direction. |
| 1.3.6.1.4.1.449.2.1.3.1.1.31.1.7 | Columncdx6500SPPPStatSLCNum | read-only | mandatory | This indicates the number of the SLC to which the port is connected. |
| 1.3.6.1.4.1.449.2.1.3.1.1.31.1.8 | Columncdx6500SPPPStatSLCLineNum | read-only | mandatory | This indicates the line number of the SLC to which the port is connected. |
| 1.3.6.1.4.1.449.2.1.3.1.1.31.1.9 | Columncdx6500SPPPStatFlowCntrlState | read-only | mandatory | This indicates whether the port is blocked by SLC or not. |
| 1.3.6.1.4.1.449.2.1.3.1.1.31.1.10 | Columncdx6500SPPPStatLastStatsReset | read-only | mandatory | This specifies the time stamp of the last statistics reset. |
| 1.3.6.1.4.1.449.2.1.3.1.1.31.1.11 | Columncdx6500SPPPStatChrsIn | read-only | mandatory | This indicates the number of characters that have been received by the port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.31.1.12 | Columncdx6500SPPPStatChrsOut | read-only | mandatory | This indicates the number of characters that have been transmitted by the port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.31.1.13 | Columncdx6500SPPPStatFramesIn | read-only | mandatory | This indicates the number of frames that have been received by the port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.31.1.14 | Columncdx6500SPPPStatFramesOut | read-only | mandatory | This indicates the number of frames that have been transmitted by the port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.31.1.15 | Columncdx6500SPPPStatChrsInPerSec | read-only | mandatory | This indicates the rate at which characters have been received by the port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.31.1.16 | Columncdx6500SPPPStatChrsOutPerSec | read-only | mandatory | This indicates the rate at which characters have been transmitted by the port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.31.1.17 | Columncdx6500SPPPStatFramesInPerSec | read-only | mandatory | This indicates the rate at which frames have been received by the port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.31.1.18 | Columncdx6500SPPPStatFramesOutPerSec | read-only | mandatory | This indicates the rate at which frames have been transmitted by the port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.31.1.19 | Columncdx6500SPPPStatNoOfErrorFrames | read-only | mandatory | This indicates the number of erroneous frames received by the port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.31.1.20 | Columncdx6500SPPPStatNoOfStns | read-only | mandatory | This indicates the number of stations on this SLC line. |
| 1.3.6.1.4.1.449.2.1.3.1.3 | Nodecdx6500PSTStationProtocolGroup | |||
| 1.3.6.1.4.1.449.2.1.3.1.3.9 | Tablecdx6500SPSTSPPStnStatTable | not-accessible | mandatory | This table contains SPP Station statistics parameters. |
| 1.3.6.1.4.1.449.2.1.3.1.3.9.1 | Rowcdx6500SPSTSPPSStatEntry | not-accessible | mandatory | Entries in the SPP Station Statistics Table. |
| 1.3.6.1.4.1.449.2.1.3.1.3.9.1.1 | Columncdx6500SPPSStatPortNum | read-only | mandatory | Port Number of this port. |
| 1.3.6.1.4.1.449.2.1.3.1.3.9.1.2 | Columncdx6500SPPSStatStnId | read-only | mandatory | This specifies the entry number of this station. |
| 1.3.6.1.4.1.449.2.1.3.1.3.9.1.3 | Columncdx6500SPPSStatStnStatus | read-only | mandatory | This indicates the state of the station. disabled : Station is disabled enabled : Station is enabled busyOut : busy out the station up : Station is enabled dow… |
| 1.3.6.1.4.1.449.2.1.3.1.3.9.1.4 | Columncdx6500SPPSStatSLCNum | read-only | mandatory | This indicates the number of the SLC to which the port is connected. |
| 1.3.6.1.4.1.449.2.1.3.1.3.9.1.5 | Columncdx6500SPPSStatSLCLineNum | read-only | mandatory | This indicates the line number of the SLC to which the port is connected. |
| 1.3.6.1.4.1.449.2.1.3.1.3.9.1.6 | Columncdx6500SPPSStatAdjChanState | read-only | mandatory | This indicates whether the port is blocked by the adjacent channel or not. |
| 1.3.6.1.4.1.449.2.1.3.1.3.9.1.7 | Columncdx6500SPPSStatCurrCallSummStatus | read-only | mandatory | This indicates the current status of the SPP station. calling : when it is awaiting call accept from Host connected : when the connection to the Host has been … |
| 1.3.6.1.4.1.449.2.1.3.1.3.9.1.8 | Columncdx6500SPPSStatLastClrCauseCode | read-only | mandatory | This indicates the cause code received in the last clear packet. |
| 1.3.6.1.4.1.449.2.1.3.1.3.9.1.9 | Columncdx6500SPPSStatLastClrDiagCode | read-only | mandatory | This indicates the diagnostic code received in the last clear packet. |
| 1.3.6.1.4.1.449.2.1.3.1.3.9.1.10 | Columncdx6500SPPSStatLastInCalledAddress | read-only | mandatory | This indicates the called address in the last inbound call packet. |
| 1.3.6.1.4.1.449.2.1.3.1.3.9.1.11 | Columncdx6500SPPSStatLastInCallingAddress | read-only | mandatory | This indicates the calling address in the last inbound call packet. |
| 1.3.6.1.4.1.449.2.1.3.1.3.9.1.12 | Columncdx6500SPPSStatLastInCallFacilities | read-only | mandatory | This indicates the facilities in the last inbound call request packet. |
| 1.3.6.1.4.1.449.2.1.3.1.3.9.1.13 | Columncdx6500SPPSStatLastInCallCUD | read-only | mandatory | This indicates the data in the Call User Data field in the last inbound call request packet. |
| 1.3.6.1.4.1.449.2.1.3.1.3.9.1.14 | Columncdx6500SPPSStatLastOutCalledAddress | read-only | mandatory | This indicates the called address in the last outbound call packet. |
| 1.3.6.1.4.1.449.2.1.3.1.3.9.1.15 | Columncdx6500SPPSStatLastOutCallingAddress | read-only | mandatory | This indicates the calling address in the last outbound call packet. |
| 1.3.6.1.4.1.449.2.1.3.1.3.9.1.16 | Columncdx6500SPPSStatLastOutCallFacilities | read-only | mandatory | This indicates the facilities in the last outbound call request packet. |
| 1.3.6.1.4.1.449.2.1.3.1.3.9.1.17 | Columncdx6500SPPSStatLastOutCallCUD | read-only | mandatory | This indicates the data in the Call User Data field in the last outbound call request packet. |
| 1.3.6.1.4.1.449.2.1.3.1.3.9.1.18 | Columncdx6500SPPSStatChrsIn | read-only | mandatory | This indicates the number of characters received by the PAD from SLC for this station. |
| 1.3.6.1.4.1.449.2.1.3.1.3.9.1.19 | Columncdx6500SPPSStatChrsOut | read-only | mandatory | This indicates the number of characters sent by the PAD to SLC for this station. |
| 1.3.6.1.4.1.449.2.1.3.1.3.9.1.20 | Columncdx6500SPPSStatFramesIn | read-only | mandatory | This indicates the number of frames received by the PAD from SLC for this station. |
| 1.3.6.1.4.1.449.2.1.3.1.3.9.1.21 | Columncdx6500SPPSStatFramesOut | read-only | mandatory | This indicates the number of frames sent by the PAD to SLC for this station. |
| 1.3.6.1.4.1.449.2.1.3.1.3.9.1.22 | Columncdx6500SPPSStatChrsInPerSec | read-only | mandatory | This indicates the rate at which characters were received by the PAD from SLC for this station. |
| 1.3.6.1.4.1.449.2.1.3.1.3.9.1.23 | Columncdx6500SPPSStatChrsOutPerSec | read-only | mandatory | This indicates the rate at which characters were sent by the PAD to SLC for this station. |
| 1.3.6.1.4.1.449.2.1.3.1.3.9.1.24 | Columncdx6500SPPSStatFramesInPerSec | read-only | mandatory | This indicates the rate at which frames were received by the PAD from SLC for this station. |
| 1.3.6.1.4.1.449.2.1.3.1.3.9.1.25 | Columncdx6500SPPSStatFramesOutPerSec | read-only | mandatory | This indicates the rate at which frames were sent by the PAD to SLC for this station. |
| 1.3.6.1.4.1.449.2.1.3.1.3.9.1.26 | Columncdx6500SPPSStatNoOfErrorFrames | read-only | mandatory | This indicates the number of erroneous frames received. |
| 1.3.6.1.4.1.449.2.1.3.1.3.9.1.27 | Columncdx6500SPPSStatStnState | read-only | mandatory | This indicates the current status of the configured station. up : station is up dsbl : station is disabled. |
| 1.3.6.1.4.1.449.2.1.3.1.3.9.1.28 | Columncdx6500SPPSStatLastStatsReset | read-only | mandatory | This specifies the time stamp of the last statistics reset. |
| 1.3.6.1.4.1.449.2.1.4 | Nodecdx6500Controls | |||
| 1.3.6.1.4.1.449.2.1.4.13 | Nodecdx6500ContSPPTable | |||
| 1.3.6.1.4.1.449.2.1.4.13.1 | Tablecdx6500ContSPPPortTable | not-accessible | mandatory | This table contains the SPP Port Control parameters. |
| 1.3.6.1.4.1.449.2.1.4.13.1.1 | Rowcdx6500ContSPPPortEntry | not-accessible | mandatory | Entries in the SPP Port Control Table. |
| 1.3.6.1.4.1.449.2.1.4.13.1.1.1 | Columncdx6500ContSPPPortNum | not-accessible | mandatory | Port Number of this port. |
| 1.3.6.1.4.1.449.2.1.4.13.1.1.2 | Columncdx6500ContSPPPortBoot | write-only | mandatory | Boots the specified SPP Port boot : Boot the port. |
| 1.3.6.1.4.1.449.2.1.4.13.1.1.3 | Columncdx6500ContSPPPortEnable | write-only | mandatory | Enables the specified SPP Port. enable : Enable the Port. |
| 1.3.6.1.4.1.449.2.1.4.13.1.1.4 | Columncdx6500ContSPPPortDisable | write-only | mandatory | Disables the specified SPP Port. disable : Disable Port. |
| 1.3.6.1.4.1.449.2.1.4.13.1.1.5 | Columncdx6500ContSPPPortResetStats | write-only | mandatory | Reset statistics for the specified SPP Port. reset : Reset port statistics. |
| 1.3.6.1.4.1.449.2.1.4.13.2 | Tablecdx6500ContSPPStnTable | not-accessible | mandatory | This table contains the SPP Station Control parameters. |
| 1.3.6.1.4.1.449.2.1.4.13.2.1 | Rowcdx6500ContSPPStnEntry | not-accessible | mandatory | Entries in the SPP Station Control Table. |
| 1.3.6.1.4.1.449.2.1.4.13.2.1.1 | Columncdx6500SContSPPPortNum | not-accessible | mandatory | Port Number of this port. |
| 1.3.6.1.4.1.449.2.1.4.13.2.1.2 | Columncdx6500ContSPPStnId | not-accessible | mandatory | SPP station number. |
| 1.3.6.1.4.1.449.2.1.4.13.2.1.3 | Columncdx6500ContSPPStnBoot | not-accessible | mandatory | Boots the secified SPP station boot : Boot the station. |
| 1.3.6.1.4.1.449.2.1.4.13.2.1.4 | Columncdx6500ContSPPStnEnable | write-only | mandatory | Enables the specified SPP station. enable : Enable station. |
| 1.3.6.1.4.1.449.2.1.4.13.2.1.5 | Columncdx6500ContSPPStnDisable | write-only | mandatory | Disables the specified SPP station. disable : Disable Station. |
| 1.3.6.1.4.1.449.2.1.4.13.2.1.6 | Columncdx6500ContSPPStnResetStats | write-only | mandatory | Reset statistics for the specified SPP station. reset : Reset station statistics. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DisplayString | OCTET STRING |