SRAP-WCM-MIB
185 objects
The 3COM Wireless LAN Products Web Configuration Management MIB Module.
Imported Objects
| A3Com-products-MIB | a3Com |
| RFC1213-MIB | ifIndex |
| SNMPv2-CONF | NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | MacAddress |
| SRAP-GLOBAL-REG | srAPModules srAPWCM |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43.0.95 | NotificationradioTransmitStop | current | The radio has stopped transmitting due to a fault. There may be a jammed channel. The user should change the AP to the different channel or check if there is a… | |
| 1.3.6.1.4.1.43.0.96 | NotificationradioReceiveStop | current | The radio has stopped receiving due to a fault. There may be a jammed channel. The user should change the AP to the different channel or check if there is a RF… | |
| 1.3.6.1.4.1.43.0.97 | NotificationexceedMaxAssociated | current | Exceed max 256 Associated clients. No more association of wireless clients allowed. The user can disassociate the idle wirless clients. | |
| 1.3.6.1.4.1.43.0.98 | NotificationexceedtThresholdAssociated | current | The number of Wireless Clients association reaches the threshold of the AP. Please check the MIB object, thresholdAssociated. The default is 200. The number of… | |
| 1.3.6.1.4.1.43.0.99 | NotificationdslSecurityViolation | current | For Wireless Client, User name or password is not correct in Dynamic Security Link database of AP. The user can check the AP admin if the account exists on the… | |
| 1.3.6.1.4.1.43.35.1.1.5 | IdentitysrAPWCMMIBModule | The 3COM Wireless LAN Products Web Configuration Management MIB Module. | ||
| 1.3.6.1.4.1.43.35.1.7.1 | NodewcmMIB | |||
| 1.3.6.1.4.1.43.35.1.7.1.1 | NodewcmConf | |||
| 1.3.6.1.4.1.43.35.1.7.1.1.1 | NodeapConfigMgmtGroups | |||
| 1.3.6.1.4.1.43.35.1.7.1.1.1.1 | GroupapManufactureInfoGroup | current | The apManufactureInfo group | |
| 1.3.6.1.4.1.43.35.1.7.1.1.1.2 | GroupapSystemConfigGroup | current | The apSystemConfig group | |
| 1.3.6.1.4.1.43.35.1.7.1.1.1.3 | GroupapSNMPInfoGroup | current | The apSNMPInfo group | |
| 1.3.6.1.4.1.43.35.1.7.1.1.1.4 | GroupapRFConfigGroup | current | The apRFConfig group | |
| 1.3.6.1.4.1.43.35.1.7.1.1.2 | NodeapPerformMgmtGroups | |||
| 1.3.6.1.4.1.43.35.1.7.1.1.2.1 | GroupapRFStatisticsGroup | current | The apRFStatistics group | |
| 1.3.6.1.4.1.43.35.1.7.1.1.2.2 | GroupapEtherItfStatGroup | current | The apEtherInfStat group | |
| 1.3.6.1.4.1.43.35.1.7.1.1.2.3 | GroupapRFItfStatGroup | current | The apRFInfStat group | |
| 1.3.6.1.4.1.43.35.1.7.1.1.2.4 | GroupapTrafficMatrixGroup | current | The apTrafficMatrix group | |
| 1.3.6.1.4.1.43.35.1.7.1.1.2.5 | GroupapDSPerFreqStatTableGroup | current | The apDSPerFreqStatTable group | |
| 1.3.6.1.4.1.43.35.1.7.1.1.3 | NodeapFaultMgmtGroups | |||
| 1.3.6.1.4.1.43.35.1.7.1.1.3.1 | GroupapFaultMgmtGroup | current | The apRFStatistics group | |
| 1.3.6.1.4.1.43.35.1.7.1.1.4 | NodeapSecurityMgmtGroups | |||
| 1.3.6.1.4.1.43.35.1.7.1.1.4.1 | GroupapSecurityMgmtGroup | current | The apSecurityMgmt group | |
| 1.3.6.1.4.1.43.35.1.7.1.1.5 | NodeapEventGroups | |||
| 1.3.6.1.4.1.43.35.1.7.1.1.5.1 | GroupwcmNotificationGroup | current | The wcm Notifications. | |
| 1.3.6.1.4.1.43.35.1.7.1.2 | NodewcmObjs | |||
| 1.3.6.1.4.1.43.35.1.7.1.2.1 | NodeapConfigMgmt | |||
| 1.3.6.1.4.1.43.35.1.7.1.2.1.1 | NodeapManufactureInfo | |||
| 1.3.6.1.4.1.43.35.1.7.1.2.1.1.1 | ScalarapModelnumber | read-only | current | The Model Number of the ACCESS Point device. |
| 1.3.6.1.4.1.43.35.1.7.1.2.1.1.2 | ScalarapSerialnumber | read-only | current | The Serial Number of the ACCESS Point system. |
| 1.3.6.1.4.1.43.35.1.7.1.2.1.1.3 | ScalarapMyMacAddr | read-only | current | The MAC address of the ACCESS Point. |
| 1.3.6.1.4.1.43.35.1.7.1.2.1.1.4 | ScalarapFirmwareVer | read-only | current | The current version of the ACCESS Point firmware. |
| 1.3.6.1.4.1.43.35.1.7.1.2.1.1.5 | ScalarapWebUiVer | read-only | current | The current version of the ACCESS Point WEB Configration System. |
| 1.3.6.1.4.1.43.35.1.7.1.2.1.1.6 | ScalarapMfgDate | read-only | current | The Date of this ACCESS Point was manufactured. |
| 1.3.6.1.4.1.43.35.1.7.1.2.1.1.7 | ScalarapProductName | read-only | current | The Product Name of this ACCESS Point. |
| 1.3.6.1.4.1.43.35.1.7.1.2.1.1.8 | ScalarapMfgName | read-only | current | The Manufacture Name of this ACCESS Point. |
| 1.3.6.1.4.1.43.35.1.7.1.2.1.1.9 | ScalarapHardwareRev | read-only | current | The Hardware Revision of this ACCESS Point. |
| 1.3.6.1.4.1.43.35.1.7.1.2.1.2 | NodeapSystemConfig | |||
| 1.3.6.1.4.1.43.35.1.7.1.2.1.2.1 | ScalarapDeviceName | read-write | current | An ASCII string to identify the Device Name of this ACCESS Point (up to 255 characters). |
| 1.3.6.1.4.1.43.35.1.7.1.2.1.2.2 | ScalarapDeviceLoc | read-write | current | An ASCII string to identify the Location of this ACCESS Point (up to 255 characters). |
| 1.3.6.1.4.1.43.35.1.7.1.2.1.2.3 | ScalarapHelpFilePath | read-write | current | An ASCII string to identify the Location of this ACCESS Point (up to 255 characters). |
| 1.3.6.1.4.1.43.35.1.7.1.2.1.2.4 | ScalarapMyIPAddr | read-write | current | The IP address for the Access Point. It can be set when apStaticIPAddrEnable is set to is enabled. |
| 1.3.6.1.4.1.43.35.1.7.1.2.1.2.5 | ScalarapSubnetMask | read-write | current | The subnet mask for the Access Point. It can be set when apStaticIPAddrEnable is set to enabled. |
| 1.3.6.1.4.1.43.35.1.7.1.2.1.2.6 | ScalarapGatewayIPAddr | read-write | current | The IP address of the gateway for the Access Point. |
| 1.3.6.1.4.1.43.35.1.7.1.2.1.2.7 | ScalarapAdditionalGatewaysTableLength | read-only | current | The maximum number of entries in the Additional Gateways Table. |
| 1.3.6.1.4.1.43.35.1.7.1.2.1.2.8 | TableapAdditionalGatewaysTable | not-accessible | current | A table of information for additional Gateways. The current number of entries is 4(that mean aditional gateway is 3). |
| 1.3.6.1.4.1.43.35.1.7.1.2.1.2.8.1 | RowapAdditionalGatewaysEntry | not-accessible | current | An entry in the table of information for additional gateways for this ACCESS Point. A row in this table cannot be created or deleted by SNMP operations on colu… |
| 1.3.6.1.4.1.43.35.1.7.1.2.1.2.8.1.1 | ColumnadditionalGatewaysIndex | not-accessible | current | Specific Gateway information Table index. Range (1..3). |
| 1.3.6.1.4.1.43.35.1.7.1.2.1.2.8.1.2 | ColumnapAdditionalGatewaysIPAddr | read-write | current | The IP address of the Gateway used for this Access Point. |
| 1.3.6.1.4.1.43.35.1.7.1.2.1.2.9 | ScalarapDHCPEnable | read-write | current | Enables/Disables Wireless DHCP mode for the Access Point. Default is disabled(2). |
| 1.3.6.1.4.1.43.35.1.7.1.2.1.2.10 | ScalarapStaticIPAddrEnable | read-write | current | Enables/Disables Static IP of ACCESS Point . Default is disabled(2). Before issuing this command, set 'apMyIPAddr', 'apSubnetMask', and 'apGatewayIPAddr' to th… |
| 1.3.6.1.4.1.43.35.1.7.1.2.1.3 | NodeapSNMPInfo | |||
| 1.3.6.1.4.1.43.35.1.7.1.2.1.3.1 | ScalarapSNMPRequests | read-only | current | Indicates the number of SNMP requests to this SNMP Agent. |
| 1.3.6.1.4.1.43.35.1.7.1.2.1.3.2 | ScalarapSNMPTraps | read-only | current | Indicates the number of Traps that were generated by this SNMP Agent. |
| 1.3.6.1.4.1.43.35.1.7.1.2.1.3.3 | ScalarapAllTrapsEnable | read-write | current | Enables/Disables all SNMP traps. Default is enabled(1). |
| 1.3.6.1.4.1.43.35.1.7.1.2.1.3.4 | ScalarapColdBootTrapEnable | read-write | current | Enables/Disables ACCESS Point Cold Boot trap. Default is allTrapHosts(4). This is a generic-trap and the trap code is 0. When not disabled the trap could be di… |
| 1.3.6.1.4.1.43.35.1.7.1.2.1.3.5 | ScalarapAuthenFailureTrapEnable | read-write | current | Enables/Disables authentication failure trap. Default is allTrapHosts(4). This is a generic-trap and the trap code is 4. When not disabled the trap could be di… |
| 1.3.6.1.4.1.43.35.1.7.1.2.1.3.6 | ScalarapRFTrapEnable | read-write | current | Enables/Disables ACCESS Point RF driver startup trap. Default is allTrapHosts(4). This is an a3com enterprise-specific trap. When not disabled the trap could b… |
| 1.3.6.1.4.1.43.35.1.7.1.2.1.3.7 | ScalarapWarmBootTrapEnable | read-write | current | Enables/Disables Warm Boot trap. Default is allTrapHosts(4). This is a generic-trap and the trap code is 0. When not disabled the trap could be directed to Tra… |
| 1.3.6.1.4.1.43.35.1.7.1.2.1.3.8 | ScalarapWCMaxAssocTrapEnable | read-write | current | Enables/Disables apWCMaxAssoc Trap. Default is allTrapHosts(4). When not disabled the trap could be directed to TrapHost1, TrapHost2 or all TrapHosts. The apAl… |
| 1.3.6.1.4.1.43.35.1.7.1.2.1.3.9 | ScalarapThresholdAssociatedEnable | read-write | current | Enables/Disables apThresholdAssociated Trap. Default is allTrapHosts(4). When not disabled the trap could be directed to TrapHost1, TrapHost2 or all TrapHosts.… |
| 1.3.6.1.4.1.43.35.1.7.1.2.1.3.10 | ScalardslSecurityViolationEnable | read-write | current | Enables/Disables dslSecurityViolation Trap. Default is allTrapHosts(4). When not disabled the trap could be directed to TrapHost1, TrapHost2 or all TrapHosts. … |
| 1.3.6.1.4.1.43.35.1.7.1.2.1.4 | NodeapRFConfig | |||
| 1.3.6.1.4.1.43.35.1.7.1.2.1.4.1 | ScalarapWlanServiceArea | read-write | current | The WLAN Service Area of the ACCESS Point. |
| 1.3.6.1.4.1.43.35.1.7.1.2.1.4.2 | ScalarapCountryName | read-only | current | The country for which the ACCESS Point radio is configured. It is set at the factory and may not be altered. |
| 1.3.6.1.4.1.43.35.1.7.1.2.1.4.3 | ScalarapWEPAlgorithm | read-only | current | This attribute is a set of all the shared key WEP algorithms supported by the STAs. The following are the default values and the associated algorithm. Value = … |
| 1.3.6.1.4.1.43.35.1.7.1.2.1.4.4 | ScalarapShortPreamble | read-write | current | This attribute is a set to enable short preamble for compatibility within the 802.11 community. Setting it to enabled shall result in performance enhancement. … |
| 1.3.6.1.4.1.43.35.1.7.1.2.1.4.5 | ScalarapMaxWCTrigger | read-write | current | Indicates the trigger point for sending apWCMaxAssocTrap trap. Range (1..255) The default value is 255. |
| 1.3.6.1.4.1.43.35.1.7.1.2.1.4.6 | ScalarapRadioAutoSense | read-write | current | This attribute is a set to enable Radio Auto Sense. Default is enabled. |
| 1.3.6.1.4.1.43.35.1.7.1.2.1.4.7 | ScalarapRadioChannel | read-write | current | This attribute is Radio Channel. This attribute can be written when apRadioAutoSense is disabled. |
| 1.3.6.1.4.1.43.35.1.7.1.2.1.4.8 | ScalarapHighPerformance | read-write | current | This attribute is a set to enable Radio High Performance. Default is disabled. |
| 1.3.6.1.4.1.43.35.1.7.1.2.1.4.9 | ScalarapTransmitPower | read-write | current | This attribute is a set the transmit power from 1-100 micro watts. |
| 1.3.6.1.4.1.43.35.1.7.1.2.1.4.10 | ScalarapRadioAntenna | read-write | current | This attribute is a set the section of radio antenna. |
| 1.3.6.1.4.1.43.35.1.7.1.2.1.4.11 | ScalarthresholdAssociated | read-write | current | This attribute is a set the threshold of Associated Wireless Client. The default is 200. |
| 1.3.6.1.4.1.43.35.1.7.1.2.1.4.12 | ScalarapDataRateMgmt | read-write | current | This attribute is automatically or manually set the best data rate . |
| 1.3.6.1.4.1.43.35.1.7.1.2.1.4.13 | ScalarapDataRate5 | read-write | current | This attribute is a set the data rate to 5.5 Mb/sec . |
| 1.3.6.1.4.1.43.35.1.7.1.2.1.4.14 | ScalarapDataRate11 | read-write | current | This attribute is a set the data rate to 11.0 Mb/sec . |
| 1.3.6.1.4.1.43.35.1.7.1.2.2 | NodeapPerformMgmt | |||
| 1.3.6.1.4.1.43.35.1.7.1.2.2.1 | NodeapRFStatistics | |||
| 1.3.6.1.4.1.43.35.1.7.1.2.2.1.1 | ScalarrfTxUcastFrms | read-only | current | The number of Unicast frames successfully transmitted. |
| 1.3.6.1.4.1.43.35.1.7.1.2.2.1.2 | ScalarrfRxUcastFrms | read-only | current | The number of Unicast frames successfully received |
| 1.3.6.1.4.1.43.35.1.7.1.2.2.1.3 | ScalarrfTxBcastFrms | read-only | current | The number of Broadcast frames transmitted |
| 1.3.6.1.4.1.43.35.1.7.1.2.2.1.4 | ScalarrfRxBcastFrms | read-only | current | The number of Broadcast frames received. |
| 1.3.6.1.4.1.43.35.1.7.1.2.2.1.5 | ScalarrfTxMcastFrms | read-only | current | The number of Multicast frames transmitted. |
| 1.3.6.1.4.1.43.35.1.7.1.2.2.1.6 | ScalarrfRxMcastFrms | read-only | current | The number of Multicast frames received. |
| 1.3.6.1.4.1.43.35.1.7.1.2.2.1.7 | ScalarrfTxEncryptFrms | read-only | current | The number of Encrypted frames transmitted. |
| 1.3.6.1.4.1.43.35.1.7.1.2.2.1.8 | ScalarrfRxEncryptFrms | read-only | current | The number of Encrypted frames received. |
| 1.3.6.1.4.1.43.35.1.7.1.2.2.1.9 | ScalarrfTxFragFrms | read-only | current | The number of frames fragments transmitted. |
| 1.3.6.1.4.1.43.35.1.7.1.2.2.1.10 | ScalarrfRxFragFrms | read-only | current | The number of frames fragments received. |
| 1.3.6.1.4.1.43.35.1.7.1.2.2.1.11 | ScalarrfTxBeacons | read-only | current | The number of Beacon frames transmitted. |
| 1.3.6.1.4.1.43.35.1.7.1.2.2.1.12 | ScalarrfRxBeacons | read-only | current | The number of Beacon frames received. |
| 1.3.6.1.4.1.43.35.1.7.1.2.2.1.13 | ScalarrfTxACK | read-only | current | The number of ACK frames transmitted in response to successfully received frames. |
| 1.3.6.1.4.1.43.35.1.7.1.2.2.1.14 | ScalarrfRxACK | read-only | current | The number of frames transmitted that had their corresponding ACK frames successfully received frames. |
| 1.3.6.1.4.1.43.35.1.7.1.2.2.1.15 | ScalarrfTxRTS | read-only | current | The number of RTS frames that were successfully transmitted. |
| 1.3.6.1.4.1.43.35.1.7.1.2.2.1.16 | ScalarrfRxRTS | read-only | current | The number of RTS received frames. |
| 1.3.6.1.4.1.43.35.1.7.1.2.2.1.17 | ScalarrfCTSFailures | read-only | current | The number of frames for which no CTS frames was received in response to a RTS frames being sent. |
| 1.3.6.1.4.1.43.35.1.7.1.2.2.1.18 | ScalarrfRxCTS | read-only | current | The number of CTS frames received in response to a RTS. |
| 1.3.6.1.4.1.43.35.1.7.1.2.2.1.19 | ScalarrfTxACKFailures | read-only | current | The number of frames transmitted that did not have their corresponding ACK packets successfully received. |
| 1.3.6.1.4.1.43.35.1.7.1.2.2.1.20 | ScalarrfTxRetrys | read-only | current | The number of frames that were retransmitted. |
| 1.3.6.1.4.1.43.35.1.7.1.2.2.1.21 | ScalarrfFCSErrors | read-only | current | The number of frames received with checksum error. |
| 1.3.6.1.4.1.43.35.1.7.1.2.2.1.22 | ScalarrfRxDuplicateFrms | read-only | current | The number of duplicate frames received. |
| 1.3.6.1.4.1.43.35.1.7.1.2.2.1.23 | ScalarrfWEPUndecryptFrms | read-only | current | The number of frames received with the WEP sub-field of the Frame Control field set to one and the WEPOn value for the key mapped to the TA's MAC address indic… |
| 1.3.6.1.4.1.43.35.1.7.1.2.2.1.24 | ScalarrfWEPICVErrors | read-only | current | The number of frames received with the WEP sub-field of the Frame Control field set to one and the value of the ICV as received in the frame does not match the… |
| 1.3.6.1.4.1.43.35.1.7.1.2.2.2 | NodeapEtherItfStat | |||
| 1.3.6.1.4.1.43.35.1.7.1.2.2.2.1 | ScalarapEtherPacketsIns | read-only | current | Indicates the number of good packets received on the Ethernet interface. |
| 1.3.6.1.4.1.43.35.1.7.1.2.2.2.2 | ScalarapEtherPacketsOuts | read-only | current | Indicates the number of packets successfully transmitted on the Ethernet interface. |
| 1.3.6.1.4.1.43.35.1.7.1.2.2.2.3 | ScalarapEtherOctetsIns | read-only | current | Indicates the number of good bytes received on the Ethernet interface. |
| 1.3.6.1.4.1.43.35.1.7.1.2.2.2.4 | ScalarapEtherOctetsOuts | read-only | current | Indicates the number of bytes successfully transmitted on the Ethernet interface. |
| 1.3.6.1.4.1.43.35.1.7.1.2.2.2.5 | ScalarapEtherPktsInPerSec | read-only | current | Indicates the number of good packets per second received on the Ethernet Interface. |
| 1.3.6.1.4.1.43.35.1.7.1.2.2.2.6 | ScalarapEtherPktsOutPerSec | read-only | current | Indicates the number of packets per second successfully transmitted on the Ethernet interface. |
| 1.3.6.1.4.1.43.35.1.7.1.2.2.2.7 | ScalarapEtherOctInPerSec | read-only | current | Indicates the number of good bytes per second received on the Ethernet Interface. |
| 1.3.6.1.4.1.43.35.1.7.1.2.2.2.8 | ScalarapEtherOctOutPerSec | read-only | current | Indicates the number of bytes per second successfully transmitted on the Ethernet interface. |
| 1.3.6.1.4.1.43.35.1.7.1.2.2.3 | NodeapRFItfStat | |||
| 1.3.6.1.4.1.43.35.1.7.1.2.2.3.1 | ScalarapRFFrmsIns | read-only | current | Indicates the number of good packets received on the RF interface. |
| 1.3.6.1.4.1.43.35.1.7.1.2.2.3.2 | ScalarapRFFrmsOuts | read-only | current | Indicates the number of packets successfully transmitted on the RF interface. |
| 1.3.6.1.4.1.43.35.1.7.1.2.2.3.3 | ScalarapRFOctetsIns | read-only | current | Indicates the number of good bytes received on the RF interface. |
| 1.3.6.1.4.1.43.35.1.7.1.2.2.3.4 | ScalarapRFOctetsOuts | read-only | current | Indicates the number of bytes successfully transmitted on the RF interface. |
| 1.3.6.1.4.1.43.35.1.7.1.2.2.3.5 | ScalarapRFFrmsInPerSec | read-only | current | Indicates the number of good packets per second received on the RF Interface. |
| 1.3.6.1.4.1.43.35.1.7.1.2.2.3.6 | ScalarapRFFrmsOutPerSec | read-only | current | Indicates the number of packets per second successfully transmitted on the RF interface. |
| 1.3.6.1.4.1.43.35.1.7.1.2.2.3.7 | ScalarapRFOctInPerSec | read-only | current | Indicates the number of good bytes per second received on the RF Interface. |
| 1.3.6.1.4.1.43.35.1.7.1.2.2.3.8 | ScalarapRFOctOutPerSec | read-only | current | Indicates the number of bytes per second successfully transmitted on the RF interface. |
| 1.3.6.1.4.1.43.35.1.7.1.2.2.4 | NodeapTrafficMatrix | |||
| 1.3.6.1.4.1.43.35.1.7.1.2.2.4.1 | ScalarapEnetsNPktsToEnets | read-only | current | Indicates the number of packets sent from the Ethernet Interface the Ethernet Interface. Must be 0 |
| 1.3.6.1.4.1.43.35.1.7.1.2.2.4.2 | ScalarapRFNPktsToEnets | read-only | current | Indicates the number of packets sent from the RF Interface to the Ethernet Interface. |
| 1.3.6.1.4.1.43.35.1.7.1.2.2.4.3 | ScalarapEnetsNPktsToRF | read-only | current | Indicates the number of packets sent from Ethernet Interface to the RF Interface. |
| 1.3.6.1.4.1.43.35.1.7.1.2.2.4.4 | ScalarapRFNPktsToRF | read-only | current | Indicates the number of packets sent from the RF Interfaceto the RF Interface. Must be 0 |
| 1.3.6.1.4.1.43.35.1.7.1.2.2.5 | TableapDSPerFreqStatTable | not-accessible | current | A table of Radio Per Frequency statistics, which is based on the historical frequency records used by this Access Point. The current number of entries is 78. |
| 1.3.6.1.4.1.43.35.1.7.1.2.2.5.1 | RowapDSPerFreqStatEntry | not-accessible | current | An entry in the table of Radio per frequency statistics. A row in this table cannot be created or deleted by SNMP operations on columns of the table. |
| 1.3.6.1.4.1.43.35.1.7.1.2.2.5.1.1 | ColumnrfDSFrequency | read-only | current | Radio Frequency channel number. |
| 1.3.6.1.4.1.43.35.1.7.1.2.2.5.1.2 | ColumnrfDSPerFqPktsSents | read-only | current | Counter for the packets sent per frequency. |
| 1.3.6.1.4.1.43.35.1.7.1.2.2.5.1.3 | ColumnrfDSPerFqPktsRcvds | read-only | current | Counter for the packets received per frequency. |
| 1.3.6.1.4.1.43.35.1.7.1.2.2.5.1.4 | ColumnrfDSPerFqRetries | read-only | current | Counter for the retries per frequency. |
| 1.3.6.1.4.1.43.35.1.7.1.2.3 | NodeapFaultMgmt | |||
| 1.3.6.1.4.1.43.35.1.7.1.2.3.1 | ScalarapUpdateTemplateStatus | read-only | current | Reports the Firmware/HTML file download and update status. |
| 1.3.6.1.4.1.43.35.1.7.1.2.3.2 | ScalarapBackupFileName | read-write | current | The name of the file to be backuped to the TFTP Server. (Including path name and total up to 255 characters.) |
| 1.3.6.1.4.1.43.35.1.7.1.2.3.3 | ScalarapTemplateOperation | read-write | current | startBackup(1) - Backup the AP configuration through TFTP server. The AP backup configuration, named as apBackupFileName, will be saved in the default location… |
| 1.3.6.1.4.1.43.35.1.7.1.2.3.4 | ScalarapRestoreFileName | read-write | current | The name of the file to be restored to the AP. (Including path name and total up to 255 characters.) |
| 1.3.6.1.4.1.43.35.1.7.1.2.3.5 | ScalarapSyslogDstIpAddressTableLength | read-only | current | The maximum number of entries in the Syslog Destination Ip Address Table. |
| 1.3.6.1.4.1.43.35.1.7.1.2.3.6 | TableapSyslogDstIpAddressTable | not-accessible | current | A table of Syslog Destination Ip Address. The current number of entries is 2. |
| 1.3.6.1.4.1.43.35.1.7.1.2.3.6.1 | RowapSyslogDstIpAddressEntry | not-accessible | current | An entry in the table of Syslog Destination Ip Address for this ACCESS Point. A row in this table cannot be created or deleted by SNMP operations on columns of… |
| 1.3.6.1.4.1.43.35.1.7.1.2.3.6.1.1 | ColumnapSyslogDstIpAddressIndex | not-accessible | current | Specific Syslog Destination Ip Address Table index. Range (1..2). |
| 1.3.6.1.4.1.43.35.1.7.1.2.3.6.1.2 | ColumnapSyslogDstIpAddress | read-write | current | The IP address of Syslog Destination used for this Access Point. |
| 1.3.6.1.4.1.43.35.1.7.1.2.3.7 | ScalarapSyslogEnable | read-write | current | Enables/Disables syslog for the Access Point. Default is disabled(2). |
| 1.3.6.1.4.1.43.35.1.7.1.2.4 | NodeapSecurityMgmt | |||
| 1.3.6.1.4.1.43.35.1.7.1.2.4.1 | ScalarapACLViolations | read-only | current | Indicates the number of Access Control violations occurred. |
| 1.3.6.1.4.1.43.35.1.7.1.2.4.2 | ScalarapEAPSupport | read-write | current | The AP supprt the Extensive Authentication Protocol is enabled or disabled. Default is enabled. |
| 1.3.6.1.4.1.43.35.1.7.1.2.4.3 | ScalarapAuthServerSupportNumber | read-only | current | The maximum number of entries in the Authenicator Server Table. |
| 1.3.6.1.4.1.43.35.1.7.1.2.4.4 | ScalarapKeyServerSupportNumber | read-only | current | The maximum number of entries in the Key Server Table. |
| 1.3.6.1.4.1.43.35.1.7.1.2.4.5 | ScalarapAccountServerSupportNumber | read-only | current | The maximum number of entries in the Accounting Server Table. |
| 1.3.6.1.4.1.43.35.1.7.1.2.4.6 | TableapAuthServerTable | not-accessible | current | A table of information for Authenticator Servers. Now support number of entries is 2. |
| 1.3.6.1.4.1.43.35.1.7.1.2.4.6.1 | RowapAuthServerEntry | not-accessible | current | An entry in the table of information for Authenticator Servers for this Access Point. |
| 1.3.6.1.4.1.43.35.1.7.1.2.4.6.1.1 | ColumnapAuthServerIndex | not-accessible | current | A number uniquely identifying each Authenticator server. |
| 1.3.6.1.4.1.43.35.1.7.1.2.4.6.1.2 | ColumnapAuthServerIPAddr | read-write | current | The IP address of the Authenticator server referred to in this table entry. |
| 1.3.6.1.4.1.43.35.1.7.1.2.4.6.1.3 | ColumnapAuthServerPortNumber | read-write | current | The UDP port the client is using to send requests to this Authenticator server. |
| 1.3.6.1.4.1.43.35.1.7.1.2.4.6.1.4 | ColumnapAuthSharedSecret | read-write | mandatory | This values indicates the shared key used by the authentication server. |
| 1.3.6.1.4.1.43.35.1.7.1.2.4.6.1.5 | ColumnapAuthServerRetransmit | read-write | current | The number of times the access point tries to authenticate logon access. |
| 1.3.6.1.4.1.43.35.1.7.1.2.4.6.1.6 | ColumnapAuthServerTimeout | read-write | current | The number of seconds the access point waits for a reply from the RADIUS server before it resends the request |
| 1.3.6.1.4.1.43.35.1.7.1.2.4.7 | TableapKeyServerTable | not-accessible | current | A table of information for Key Servers. Now support number of entries is 2. |
| 1.3.6.1.4.1.43.35.1.7.1.2.4.7.1 | RowapKeyServerEntry | not-accessible | current | An entry in the table of information for Key Servers for this Access Point. |
| 1.3.6.1.4.1.43.35.1.7.1.2.4.7.1.1 | ColumnapKeyServerIndex | not-accessible | current | A number uniquely identifying each Key server. |
| 1.3.6.1.4.1.43.35.1.7.1.2.4.7.1.2 | ColumnapKeyServerIPAddr | read-write | current | The IP address of the Key server referred to in this table entry. |
| 1.3.6.1.4.1.43.35.1.7.1.2.4.7.1.3 | ColumnapKeyServerPortNumber | read-write | current | The UDP port the client is using to send requests to this server. |
| 1.3.6.1.4.1.43.35.1.7.1.2.4.8 | TableapAccountServerTable | not-accessible | current | A table of information for Account Servers. Now support number of entries is 1. |
| 1.3.6.1.4.1.43.35.1.7.1.2.4.8.1 | RowapAccountServerEntry | not-accessible | current | An entry in the table of information for Account Servers for this Access Point. |
| 1.3.6.1.4.1.43.35.1.7.1.2.4.8.1.1 | ColumnapAccountServerIndex | not-accessible | current | A number uniquely identifying each Account server. |
| 1.3.6.1.4.1.43.35.1.7.1.2.4.8.1.2 | ColumnapAccountServerIPAddr | read-write | current | The IP address of the Account server referred to in this table entry. |
| 1.3.6.1.4.1.43.35.1.7.1.2.4.8.1.3 | ColumnapAccountServerPortNumber | read-write | current | The UDP port the client is using to send requests to this server. |
| 1.3.6.1.4.1.43.35.1.7.1.2.4.8.1.4 | ColumnapAccountServerSharedSecret | read-write | mandatory | This values indicates the shared key used by the accounting server. |
| 1.3.6.1.4.1.43.35.1.7.1.2.4.8.1.5 | ColumnapAccountServerRetransmit | read-write | current | The number of times the access point tries to accounting logon access. |
| 1.3.6.1.4.1.43.35.1.7.1.2.4.8.1.6 | ColumnapAccountServerTimeout | read-write | current | The number of seconds the access point waits for a reply from the RADIUS accounting server before it resends the request |
| 1.3.6.1.4.1.43.35.1.7.1.2.4.9 | ScalarapFastReKeying | read-write | current | The AP supprt the Fast-rekeying is enabled or disabled. Default is disabled. |
| 1.3.6.1.4.1.43.35.1.7.1.2.4.10 | ScalarapTFTPServerPortNumber | read-write | current | The TFTP Server port. |
| 1.3.6.1.4.1.43.35.1.7.1.2.4.11 | ScalarapTFTPRetries | read-write | current | The maximum retries number of tftp client in SRAPEE |
| 1.3.6.1.4.1.43.35.1.7.1.2.4.12 | ScalarapTFTPTimeOutInterval | read-write | current | The maximum time out interval of tftp client in SRAPEE |
| 1.3.6.1.4.1.43.35.1.7.1.2.4.13 | TableapEncryptionTable | not-accessible | current | Conceptual table for Encryption setting of device |
| 1.3.6.1.4.1.43.35.1.7.1.2.4.13.1 | RowapEncryptionEntry | not-accessible | current | An Entry (conceptual row) in the Encryption Table ifIndex - Each IEEE 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are in… |
| 1.3.6.1.4.1.43.35.1.7.1.2.4.13.1.1 | ColumnapEncryptionMode | read-write | current | The encryption mode that each IEEE 802.11 Interface(apEncryptionMode.ifIndex) is using. Value: 1 = No Encryption 2 = 64 bit WEP 3 = 128 bit WEP 4 = 152 bit WEP… |
| 1.3.6.1.4.1.43.35.1.7.1.2.4.13.1.2 | ColumnapWPAPSKPassPhrase | read-write | current | A WPA Pre-Share Key Pass Phrase. |
| 1.3.6.1.4.1.43.35.1.7.1.2.4.13.1.3 | ColumnapWEPDefaultKeyID | read-write | current | The WEPDefaultKey N currently being used to encrypt data |
| 1.3.6.1.4.1.43.35.1.7.1.2.4.13.1.4 | ColumnapWEPDefaultKey1 | read-write | current | A WEP default secret key 1 value. |
| 1.3.6.1.4.1.43.35.1.7.1.2.4.13.1.5 | ColumnapWEPDefaultKey2 | read-write | current | A WEP default secret key 2 value. |
| 1.3.6.1.4.1.43.35.1.7.1.2.4.13.1.6 | ColumnapWEPDefaultKey3 | read-write | current | A WEP default secret key 3 value. |
| 1.3.6.1.4.1.43.35.1.7.1.2.4.13.1.7 | ColumnapWEPDefaultKey4 | read-write | current | A WEP default secret key 4 value. |
| 1.3.6.1.4.1.43.35.1.7.1.3 | NodewcmEvents | |||
| 1.3.6.1.4.1.43.35.1.7.1.3.0 | NodewcmEventsV2 |