MIB Viewer

SS-TRAP-MIB

25 objects
The Signaling Server SNMP trap MIB.
Imported Objects
RFC-1215TRAP-TYPE
RFC1213-MIBDisplayString
SNMPv2-SMIenterprises MODULE-IDENTITY OBJECT-TYPE
SNMPv2-TCDateAndTime RowPointer
OIDNameAccessStatusDescription
1.3.6.1.4.1.562Nodent
1.3.6.1.4.1.562.3Nodemeridian
1.3.6.1.4.1.562.3.21Nodesigserv
1.3.6.1.4.1.562.3.21.5Nodessmib
1.3.6.1.4.1.562.3.21.5.4Nodefm-Info
1.3.6.1.4.1.562.3.21.5.4.1NodefmSSAlarmTraps
1.3.6.1.4.1.562.3.21.5.4.1.1NodefmSScriticalAlarmThis trap is used to provide a real time indication of a critical alarm condition. The variables listed in VARIABLES clause are defined in `fmSSAlarmInfo' grou…
1.3.6.1.4.1.562.3.21.5.4.1.2NodefmSSmajorAlarmThis trap is used to provide a real time indication of a major alarm condition. The variables listed in VARIABLES clause are defined in `fmSSAlarmInfo' group a…
1.3.6.1.4.1.562.3.21.5.4.1.3NodefmSSminorAlarmThis trap is used to provide a real time indication of a minor alarm condition. The variables listed in VARIABLES clause are defined in `fmSSAlarmInfo' group a…
1.3.6.1.4.1.562.3.21.5.4.1.4NodefmSSwarningAlarmThis trap is used to provide a real time indication of a warning alarm condition. The variables listed in VARIABLES clause are defined in `fmSSAlarmInfo' group…
1.3.6.1.4.1.562.3.21.5.4.1.5NodefmSSclearedAlarmThis trap is used to provide a real time indication of a cleared alarm. The variables listed in VARIABLES clause are defined in `fmSSAlarmInfo' group are prese…
1.3.6.1.4.1.562.3.21.5.4.1.6NodefmSSindeterminateAlarmThis trap is used to provide a real time indication of a indeterminate alarm condition. The variables listed in VARIABLES clause are defined in `fmSSAlarmInfo'…
1.3.6.1.4.1.562.3.21.5.4.1.7NodefmSSAlarmInfo
1.3.6.1.4.1.562.3.21.5.4.1.7.1ScalarcomponentRowPointernot-accessiblecurrentA pointer to the RowStatus variable of the component emitting the alarm, on a system where a component is generally a table entry.
1.3.6.1.4.1.562.3.21.5.4.1.7.2ScalarcomponentNamenot-accessiblecurrentThis convention is used where each component can be uniquely referenced by a type and instance name (at the console interface also). The textual content of thi…
1.3.6.1.4.1.562.3.21.5.4.1.7.3ScalareventTimenot-accessiblecurrentThe date and time at which the alarmed event occurred.
1.3.6.1.4.1.562.3.21.5.4.1.7.4ScalaractiveListStatusnot-accessiblecurrentThe active alarm list status. This may be used by the Manager to add (on receiving a set) and delete (on receiving a clear) alarms from the alarm display.
1.3.6.1.4.1.562.3.21.5.4.1.7.5Scalarseveritynot-accessiblecurrentThe severity of the alarm which should indicate what priority should be given for fixing this problem. All values are OSI-defined; refer to CCITT X.733/ISO 101…
1.3.6.1.4.1.562.3.21.5.4.1.7.6ScalaralarmTypenot-accessiblecurrentThe alarm type field as defined by OSI which is used to indicate a broad category of what is wrong. The first 6 values are OSI-defined; refer to CCITT X.733/IS…
1.3.6.1.4.1.562.3.21.5.4.1.7.7ScalarprobableCausenot-accessiblecurrentThe probable cause for the alarm which usually qualifies the Alarm Type field. Most values are OSI-defined; refer to CCITT X.733 and X.736 (ISO 10164-4 and 101…
1.3.6.1.4.1.562.3.21.5.4.1.7.8ScalarntpIndexnot-accessiblecurrentAn 8-digit code which is an index into an NTP to provide more description of the alarm and possible actions to take. The first 4 digits indicate a 'group' of a…
1.3.6.1.4.1.562.3.21.5.4.1.7.9ScalarcommentDatanot-accessiblecurrentAdditional textual information for the network operator to use. It contains only ASCII characters. Note: The total number of bytes in commentData, operatorData…
1.3.6.1.4.1.562.3.21.50IdentitysstrapmibThe Signaling Server SNMP trap MIB.
Type Definitions
NameSyntaxStatusDescription
AlarmSeverityINTEGER { indeterminate (0), critical (1), major (2), minor (3), warning (4), cleared (5) }
AlarmTypeINTEGER { communications (1), qualityOfService (2), processing (3), equipment (4), security (5), operator (6), debug (7), unknown (8) }