SVCEXT-MIB
57 objects
The MIB module used to describe the ArrowPoint Communications content services table
Imported Objects
| APENT-MIB | svcExt |
| RFC-1215 | TRAP-TYPE |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2467.1.15.1 | IdentityapSvcExtMib | The MIB module used to describe the ArrowPoint Communications content services table | ||
| 1.3.6.1.4.1.2467.1.15.1 | NodeapSvcTransitionTrap | A service transition trap is generated whenever the the service state transitions from ACTIVE -> DEAD, or DEAD -> ACTIVE. | ||
| 1.3.6.1.4.1.2467.1.15.2 | TableapSvcTable | not-accessible | current | A list of content service entries. |
| 1.3.6.1.4.1.2467.1.15.2.1 | RowapSvcEntry | not-accessible | current | A group of information to uniquely identify a content providing service. |
| 1.3.6.1.4.1.2467.1.15.2.1.1 | ColumnapSvcName | read-create | current | The name of the content providing service. |
| 1.3.6.1.4.1.2467.1.15.2.1.2 | ColumnapSvcIndex | read-only | current | The unique service index assigned to the name by the SCM. |
| 1.3.6.1.4.1.2467.1.15.2.1.3 | ColumnapSvcIPAddress | read-create | current | The IP Address the of the content providing service. |
| 1.3.6.1.4.1.2467.1.15.2.1.4 | ColumnapSvcIPProtocol | read-create | current | The IP Protocol the of the content providing service. |
| 1.3.6.1.4.1.2467.1.15.2.1.5 | ColumnapSvcPort | read-create | current | The UDP or TCP port of the content providing service. |
| 1.3.6.1.4.1.2467.1.15.2.1.6 | ColumnapSvcKALType | read-create | current | The Keepalive detection method. |
| 1.3.6.1.4.1.2467.1.15.2.1.7 | ColumnapSvcKALFrequency | read-create | current | The Keepalive frequency of doing keepalive probes in units of seconds. |
| 1.3.6.1.4.1.2467.1.15.2.1.8 | ColumnapSvcKALMaxFailure | read-create | current | The Keepalive maximum number of failures before the service is transitioned to failed state. |
| 1.3.6.1.4.1.2467.1.15.2.1.9 | ColumnapSvcKALRetryPeriod | read-create | current | The Keepalive frequency of probes to the service after it has been transitioned to failed state. |
| 1.3.6.1.4.1.2467.1.15.2.1.10 | ColumnapSvcKALUri | read-create | current | The URI which be checked during an HTTP keepalive. |
| 1.3.6.1.4.1.2467.1.15.2.1.11 | ColumnapSvcKALMethod | read-create | current | |
| 1.3.6.1.4.1.2467.1.15.2.1.12 | ColumnapSvcEnable | read-create | current | The state of the service, either enable or disabled |
| 1.3.6.1.4.1.2467.1.15.2.1.13 | ColumnapSvcType | read-create | current | The type of this server |
| 1.3.6.1.4.1.2467.1.15.2.1.14 | ColumnapSvcQOSMinRate | read-create | current | The Average Minimum Bandwidth Rate for this service |
| 1.3.6.1.4.1.2467.1.15.2.1.15 | ColumnapSvcQOSMinBW | read-create | current | The Total Bandwidth of this service |
| 1.3.6.1.4.1.2467.1.15.2.1.16 | ColumnapSvcWeight | read-create | current | The Service weight which is used in conjunction with load metrics when making load allocation decisions. The weight may be used to bias flows towards the speci… |
| 1.3.6.1.4.1.2467.1.15.2.1.17 | ColumnapSvcState | read-only | current | The current service state |
| 1.3.6.1.4.1.2467.1.15.2.1.18 | ColumnapSvcShortLoad | read-only | current | The Service currently sensed load for Short Lived Flows |
| 1.3.6.1.4.1.2467.1.15.2.1.19 | ColumnapSvcMaxConnections | read-create | current | The maximum concurrent number of TCP connections allowed to this service |
| 1.3.6.1.4.1.2467.1.15.2.1.20 | ColumnapSvcConnections | read-only | current | The current number of TCP connections to this service |
| 1.3.6.1.4.1.2467.1.15.2.1.21 | ColumnapSvcTransitions | read-only | current | The number of service state transitions that have occurred |
| 1.3.6.1.4.1.2467.1.15.2.1.22 | ColumnapSvcMaxContent | read-create | current | Maximum pieces of content permitted to be replicated upon this service. This object only has validity when this service is configured to have type replication.… |
| 1.3.6.1.4.1.2467.1.15.2.1.23 | ColumnapSvcMaxUsage | read-create | current | Maximum storage space in MB which may be replicated upon this service. This object only has validity when the this service is configured to have type replicati… |
| 1.3.6.1.4.1.2467.1.15.2.1.24 | ColumnapSvcMaxAge | read-create | current | The time in minutes replicated content may exist upon this service before it is aged out. This age out time is applied on a per- replicated-content basis. |
| 1.3.6.1.4.1.2467.1.15.2.1.25 | ColumnapSvcAccessRecordName | read-create | current | An access record name, present in apFtpTable or apHttpTable, used for replication access when this service is configured to be of type replicationStore, publis… |
| 1.3.6.1.4.1.2467.1.15.2.1.26 | ColumnapSvcStatus | read-create | current | Status entry for this row |
| 1.3.6.1.4.1.2467.1.15.2.1.27 | ColumnapSvcCookie | read-create | current | The unique server cookie for this service. |
| 1.3.6.1.4.1.2467.1.15.2.1.28 | ColumnapSvcKALPersistence | read-create | current | This object controls whether the Keepalive will be attempted over a persistent connection. Persistent connections are supported through HTTP 1.1, and HTTP 1.0 … |
| 1.3.6.1.4.1.2467.1.15.2.1.29 | ColumnapSvcKALName | read-create | current | The name of the keepalive that this service will use. |
| 1.3.6.1.4.1.2467.1.15.2.1.30 | ColumnapSvcLongLoad | read-only | current | The Service currently sensed load for Long Lived Flows |
| 1.3.6.1.4.1.2467.1.15.2.1.31 | ColumnapSvcKALPort | read-create | current | The port to use, for TCP & HTTP keepalives. This KAL port designation does not impact 'named' keep- alive configurations. If this object is not configured, kee… |
| 1.3.6.1.4.1.2467.1.15.2.1.32 | ColumnapSvcPublishName | read-create | current | The name used to identify the service which publishes for this subscriber. This object is used in conjunction with apSvcPublishState. |
| 1.3.6.1.4.1.2467.1.15.2.1.33 | ColumnapSvcPublishState | read-create | current | The state of this service in relation to publish/subscribe activity. |
| 1.3.6.1.4.1.2467.1.15.2.1.34 | ColumnapSvcPublishInterval | read-create | current | When this service is configured as a publisher, controls when the publisher will attempt to update the subscribers. When this object contains the value 0, it i… |
| 1.3.6.1.4.1.2467.1.15.2.1.35 | ColumnapSvcAccessType | read-create | current | Specifies whether the access mechanism associated with this service is of type HTTP or FTP |
| 1.3.6.1.4.1.2467.1.15.2.1.36 | ColumnapSvcKALHash | read-create | current | This object contains the MD5 hash which will be compared for HTTP keepalives which use the GET method. |
| 1.3.6.1.4.1.2467.1.15.2.1.37 | ColumnapSvcKALFTPRecord | read-create | current | This object contains the name of the ftp-record used for a FTP keepalive |
| 1.3.6.1.4.1.2467.1.15.2.1.38 | ColumnapSvcPublishFile | read-create | current | This object contains the name of the file which the publisher will check for modification on to commence a publish operation. This object is used in conjunctio… |
| 1.3.6.1.4.1.2467.1.15.2.1.39 | ColumnapSvcRedirectDomain | read-create | current | The domain name used when a redirect service generates an object moved redirect instead of the service address. |
| 1.3.6.1.4.1.2467.1.15.2.1.40 | ColumnapSvcAvgLoad | read-only | current | The Service currently sensed average load |
| 1.3.6.1.4.1.2467.1.15.2.1.41 | ColumnapSvcIPAddressRange | read-create | current | The range of IP Addresses of the content providing service. |
| 1.3.6.1.4.1.2467.1.15.2.1.42 | ColumnapSvcPortRange | read-create | current | The range of UDP or TCP ports of the content providing service. |
| 1.3.6.1.4.1.2467.1.15.2.1.43 | ColumnapSvcKALScriptName | read-create | current | This name represents the script that will be used in conjunction with the keepalive type script. The script will be played everytime the keepalive is issued. |
| 1.3.6.1.4.1.2467.1.15.2.1.44 | ColumnapSvcKALScriptArgs | read-create | current | This name represents the script arguments that will be used in conjunction with the keepalive type script. |
| 1.3.6.1.4.1.2467.1.15.2.1.45 | ColumnapSvcKALScriptLog | read-create | current | This name represents the script log that can be used to capture output from a keepalive script. |
| 1.3.6.1.4.1.2467.1.15.2.1.46 | ColumnapSvcCacheByPass | read-create | current | Controls whether a chache type of services implicit by-pass feature is enabled or disabled |
| 1.3.6.1.4.1.2467.1.15.3 | ScalarapSvcLoadThreshold | read-write | current | Global load threshold, maximum Load Number for service eligibility |
| 1.3.6.1.4.1.2467.1.15.4 | ScalarapSvcLoadStepSize | read-write | current | The granularity of Load Numbers, expressed in msec. |
| 1.3.6.1.4.1.2467.1.15.5 | ScalarapSvcLoadStepStatic | read-write | current | Disables system dynamic Load Step Size calculation |
| 1.3.6.1.4.1.2467.1.15.6 | ScalarapSvcLoadDecayInterval | read-write | current | The frequency which an ineligible service, becomes eligible, expressed in teardown report cycles. |
| 1.3.6.1.4.1.2467.1.15.7 | ScalarapSvcLoadEnable | read-write | current | Controls system service Load calculation |
| 1.3.6.1.4.1.2467.1.15.8 | ScalarapSvcLoadSvcStatRptTimeout | read-write | current | The maximum time period the system will wait to send a teardown report. (in seconds) |
| 1.3.6.1.4.1.2467.1.15.9 | ScalarapSvcLoadInfoTimeout | read-write | current | The amount of time (in seconds), which stale load information will be aged out. |