SW-COMMON-MIB
37 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | enterprises |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.326 | Nodemarconi | |||
| 1.3.6.1.4.1.326.2 | Nodesystems | |||
| 1.3.6.1.4.1.326.2.20 | Nodeexternal | |||
| 1.3.6.1.4.1.326.2.20.1 | Nodedlink | |||
| 1.3.6.1.4.1.326.2.20.1.1 | Nodedlinkcommon | |||
| 1.3.6.1.4.1.326.2.20.1.2 | Nodegolf | |||
| 1.3.6.1.4.1.326.2.20.1.2.1 | Nodegolfproducts | |||
| 1.3.6.1.4.1.326.2.20.1.2.1.3 | Nodees2000 | |||
| 1.3.6.1.4.1.326.2.20.1.2.2 | Nodegolfcommon | |||
| 1.3.6.1.4.1.326.2.20.1.2.2.2 | Nodemarconi-mgmt | |||
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28 | Nodees2000Mgmt | |||
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2 | NodeswL2Mgmt | |||
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.1 | NodeswL2DevMgmt | |||
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.1.1 | NodeswL2DevCtrl | |||
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.1.1.1 | ScalarswL2DevCtrlStpState | read-write | mandatory | This object can be enabled or disabled spanning tree algorithm during runtime of the system. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.1.1.2 | ScalarswL2DevCtrlPartitionModeState | read-write | mandatory | This object used to enable or disable port auto partition. When the object apply for all ports of the device. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.1.1.3 | ScalarswL2DevCtrlTableLockState | read-write | mandatory | This object indicates whether the address table is locked. In other words, the address table doesn't learn any more new address. The aging timer is suspended w… |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.1.1.4 | ScalarswL2DevCtrlHOLState | read-write | mandatory | The object provides a way to prevent HOL (Head Of Line) blocking between ports. HOL protection may prevent forwarding a packet to a blocking port. The idea rel… |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.1.1.5 | ScalarswL2DevCtrlAddrLookupModesAndHitRate | read-write | mandatory | According to the differnet address looke mode setting, to enlarge the address table size is possible in device. But there is side effect as the higher level yo… |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.1.1.6 | ScalarswL2DevCtrlBuzzerState | read-write | mandatory | Controls buzzer state to be disabled or enabled. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.1.1.7 | ScalarswL2DevCtrlBuzzerTest | write-only | mandatory | Tests buzzer to bibi. First of all, any unsigned integer can be used to set. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.1.2 | NodeswL2DevAlarm | |||
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.1.2.1 | ScalarswL2DevAlarmPartition | read-write | mandatory | Depending on this object, the device send a trap or not when any one of the device's ports was partitioned. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.1.2.2 | ScalarswL2DevAlarmNewRoot | read-write | mandatory | When the device has become the new root of the Spanning Tree, this object decide whether to send a new root trap. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.1.2.3 | ScalarswL2DevAlarmTopChange | read-write | mandatory | This object determines to send a trap or not when the switch topology was changed. If the object is enabled(3), the topologyChange trap is sent by the device w… |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.1.2.4 | ScalarswL2DevAlarmLinkChange | read-write | mandatory | This object determines to send a trap or not when the link was changed. If the object is enabled(3), the Link Change trap is sent by the device when any of its… |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.1.2.5 | TableswL2DevAlarmPowerTable | not-accessible | mandatory | A table that controls error state to bibi about power module. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.1.2.5.1 | RowswL2DevAlarmPowerEntry | not-accessible | mandatory | A list of controlling informations for power module. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.1.2.5.1.1 | ColumnswL2DevAlarmPowerIndex | read-only | mandatory | ID of the power module. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.1.2.5.1.2 | ColumnswL2DevAlarmPowerTemperature | read-write | mandatory | Controls temperature error state in power module. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.1.2.5.1.3 | ColumnswL2DevAlarmPowerVolt | read-write | mandatory | Controls volt error state in power module. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.1.2.5.1.4 | ColumnswL2DevAlarmPowerCurrent | read-write | mandatory | Controls current error state in power module. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.1.2.5.1.5 | ColumnswL2DevAlarmPowerFan | read-write | mandatory | Controls fan error state in power module. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.1.2.6 | TableswL2DevAlarmSystemFanTable | not-accessible | mandatory | A table that controls error state to bibi about system fans. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.1.2.6.1 | RowswL2DevAlarmSystemFanEntry | not-accessible | mandatory | A list of controlling informations for system fans. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.1.2.6.1.1 | ColumnswL2DevAlarmSystemFanIndex | read-only | mandatory | ID of the system fans. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.1.2.6.1.2 | ColumnswL2DevAlarmSystemFanState | read-write | mandatory | Controls system fan error state. |