SW-IGMP-MIB
37 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | enterprises IpAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.326 | Nodemarconi | |||
| 1.3.6.1.4.1.326.2 | Nodesystems | |||
| 1.3.6.1.4.1.326.2.20 | Nodeexternal | |||
| 1.3.6.1.4.1.326.2.20.1 | Nodedlink | |||
| 1.3.6.1.4.1.326.2.20.1.1 | Nodedlinkcommon | |||
| 1.3.6.1.4.1.326.2.20.1.2 | Nodegolf | |||
| 1.3.6.1.4.1.326.2.20.1.2.1 | Nodegolfproducts | |||
| 1.3.6.1.4.1.326.2.20.1.2.1.3 | Nodees2000 | |||
| 1.3.6.1.4.1.326.2.20.1.2.2 | Nodegolfcommon | |||
| 1.3.6.1.4.1.326.2.20.1.2.2.2 | Nodemarconi-mgmt | |||
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28 | Nodees2000Mgmt | |||
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2 | NodeswL2Mgmt | |||
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.7 | NodeswIGMP | |||
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.7.1 | NodeswIGMPCtrl | |||
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.7.1.1 | ScalarswIGMPAdminState | read-write | mandatory | This object allows the user to enable/disable the IGMP snooping function. The IGMP function provided by the device includes both v1 and v2. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.7.1.2 | ScalarswIGMPTimeout | read-write | mandatory | The timeout value for sending IGMP query packet when no one was sent by the multicast router in the lan. The device will actively send the query message. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.7.2 | TableswIGMPInfoTable | not-accessible | mandatory | The table contains the number current IGMP query packets which is captured by this device, as well as the IGMP query packets sent by the device. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.7.2.1 | RowswIGMPInfoEntry | not-accessible | mandatory | Information about current IGMP query information, provided that swDevIGMPCaptureState and swIGMPCtrlState of associated VLAN entry are all enabled. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.7.2.1.1 | ColumnswIGMPInfoIndex | read-only | mandatory | This object indicates the IGMP query information entry number. It could be up to 12 entries, depending on current number of VLAN entries. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.7.2.1.2 | ColumnswIGMPInfoVid | read-only | mandatory | This object indicates the Vid of associated IGMP info table entry. It follows swIGMPCtrlVid in the associated entry of IGMP control table (swIGMPCtrlTable). |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.7.2.1.3 | ColumnswIGMPInfoQueryCount | read-only | mandatory | This object indicates the number of query packets received since the IGMP function enabled, in per-VLAN basis. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.7.2.1.4 | ColumnswIGMPInfoTxQueryCount | read-only | mandatory | This object indicates the send count of IGMP query messages, in per-VLAN basis. In case of IGMP timer expiration, the switch sends IGMP query packets to relate… |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.7.3 | TableswIGMPTable | not-accessible | mandatory | This table contains information regarding to the IGMP group membership report received by each port. The system will use the information recorded in this table… |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.7.3.1 | RowswIGMPEntry | not-accessible | mandatory | Each entry describes the ports which are member of a specific group address. Note that when a specific multicast address existing in the table also exist in th… |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.7.3.1.1 | ColumnswIGMPVid | read-only | mandatory | This object indicates the Vid of individual IGMP table entry. It shows the Vid of IGMP report information captured on network. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.7.3.1.2 | ColumnswIGMPGroupIpAddr | read-only | mandatory | A IP multicast group address which has port membership in the underlying network. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.7.3.1.3 | ColumnswIGMPGroupMacAddr | read-only | mandatory | The multicast MAC address corresponds to swIGMPGroupIpAddr. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.7.3.1.4 | ColumnswIGMPPortMap | read-only | mandatory | Indicates the set of ports which are members of this multicast group. These ports are represented by a octet string.The most significant bit represents the low… |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.7.3.1.5 | ColumnswIGMPIpGroupReportCount | read-only | mandatory | Indicates the number of group membership report packets received by the device corresponding to this multicast group. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.7.4 | TableswIGMPCtrlTable | not-accessible | mandatory | The table controls the Vlan's IGMP function. Its scale depends on current VLAN state (swVlanInfoStatus). If VLAN is disabled or in Mac-Base mode, there is only… |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.7.4.1 | RowswIGMPCtrlEntry | not-accessible | mandatory | The entry in IGMP control table (swIGMPCtrlTable). The entry is effective only when IGMP capture switch is enabled. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.7.4.1.1 | ColumnswIGMPCtrlIndex | read-only | mandatory | This object indicates the IGMP control entry number.Its scale depends on current VLAN state (es400VlanInfoStatus). If VLAN is disabled or in Mac-Base mode, the… |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.7.4.1.2 | ColumnswIGMPCtrlVid | read-write | mandatory | This object indicates the IGMP control entry's VLAN id. If VLAN is disabled or in Mac-Base mode, the Vid is always 0 and cannot be changed by management users.… |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.7.4.1.3 | ColumnswIGMPCtrlTimer | read-write | mandatory | The timer value for sending IGMP query packet when none was sent by the multicast router in the LAN. The timer works in per-VLAN basis. Our device will be acti… |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.7.4.1.4 | ColumnswIGMPCtrlState | read-write | mandatory | This object indicates the status of this entry. other(1) - This entry is currently in use but the conditions under which it will remain so are different from e… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| MacAddress | OCTET STRING(SIZE(6)) | ||
| PortList | OCTET STRING(SIZE(4)) |