SWITCH-SYSTEM-MIB
174 objects
iscom switch system Enterprise MIB definition.
Imported Objects
| IF-MIB | ifIndex |
| RAISECOM-BASE-MIB | iscomSwitch |
| SNMPv2-CONF | OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | MacAddress RowStatus TruthValue |
| SWITCH-TC | EnableVar PortList Vlanset |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.8886.6.1.1 | IdentityrcSystem | iscom switch system Enterprise MIB definition. | ||
| 1.3.6.1.4.1.8886.6.1.1.1 | NodercSwitchInformation | |||
| 1.3.6.1.4.1.8886.6.1.1.1.1 | ScalarrcSwitchRoseVersion | read-only | current | rose software version . |
| 1.3.6.1.4.1.8886.6.1.1.1.2 | ScalarrcSwitchHardwareVersion | read-only | current | rose hardware version . |
| 1.3.6.1.4.1.8886.6.1.1.1.3 | ScalarrcSwitchServiceInfo | read-only | deprecated | rose software service information version . every bit stand for one type of service and , '0' stand for service is up, '1' stand for not start Qos Filter Storm… |
| 1.3.6.1.4.1.8886.6.1.1.1.4 | ScalarrcSwitchLastErrorCode | read-only | deprecated | This mib object stand for system last error code ,for system analysis 0 for no error 1 ...0x7fffffff for error code |
| 1.3.6.1.4.1.8886.6.1.1.1.5 | ScalarrcSwitchMaxPhysicalPortNum | read-only | current | The physical port number which system supports. |
| 1.3.6.1.4.1.8886.6.1.1.1.6 | ScalarrcSwitchMaxAggregationPortNum | read-only | current | The aggregation port number which system supports. |
| 1.3.6.1.4.1.8886.6.1.1.1.7 | ScalarrcSwitchMaxL3IpSubnetNum | read-only | current | The layer 3 port number which system supports. |
| 1.3.6.1.4.1.8886.6.1.1.1.8 | ScalarrcSwitchMacTableCapability | read-only | current | The capability of MAC table. |
| 1.3.6.1.4.1.8886.6.1.1.1.9 | ScalarrcSwitchMacAddress | read-only | current | MAC address. |
| 1.3.6.1.4.1.8886.6.1.1.1.10 | ScalarrcSwitchVlanSpaceSize | read-only | current | the number of vlans in a vlan |
| 1.3.6.1.4.1.8886.6.1.1.1.11 | ScalarrcSwitchPvidSpaceSize | read-only | current | |
| 1.3.6.1.4.1.8886.6.1.1.1.12 | ScalarrcSwitchDefaultVlan | read-only | current | Default vlan |
| 1.3.6.1.4.1.8886.6.1.1.1.13 | ScalarrcSwitchBootstrapVersion | read-only | current | rose bootstrap version . |
| 1.3.6.1.4.1.8886.6.1.1.1.14 | ScalarrcSwitchSerialNumber | read-only | current | The serial number of the motherboard. |
| 1.3.6.1.4.1.8886.6.1.1.1.15 | ScalarrcSwitchFpgaVersion | read-only | current | rose fpga version. |
| 1.3.6.1.4.1.8886.6.1.1.1.16 | ScalarrcSwitchProductVersion | read-only | current | product version |
| 1.3.6.1.4.1.8886.6.1.1.1.17 | ScalarrcSwitchCmpAbName | read-only | current | manufacturer abbreviated name |
| 1.3.6.1.4.1.8886.6.1.1.1.18 | ScalarrcSwitchCmpFullName | read-only | current | manufacturer full name |
| 1.3.6.1.4.1.8886.6.1.1.1.19 | ScalarrcSwitchDeviceName | read-only | current | device name |
| 1.3.6.1.4.1.8886.6.1.1.1.20 | ScalarrcSwitchBackBoardVendorName | read-only | current | Backboard vendor name. |
| 1.3.6.1.4.1.8886.6.1.1.1.21 | ScalarrcSwitchBackBoardSerialNumber | read-only | current | Serial number of the backboard. |
| 1.3.6.1.4.1.8886.6.1.1.1.22 | ScalarrcSwitchBackBoardName | read-only | current | Backboard name. |
| 1.3.6.1.4.1.8886.6.1.1.1.23 | ScalarrcSwitchBackBoardVersion | read-only | current | Backboard version. |
| 1.3.6.1.4.1.8886.6.1.1.2 | NodercSlotInformation | |||
| 1.3.6.1.4.1.8886.6.1.1.2.1 | ScalarrcSlotNum | read-only | current | Total number of slot |
| 1.3.6.1.4.1.8886.6.1.1.2.2 | TablercSlotStateTable | not-accessible | current | A table of slot . |
| 1.3.6.1.4.1.8886.6.1.1.2.2.1 | RowrcSlotStateEntry | not-accessible | current | A list of slot. |
| 1.3.6.1.4.1.8886.6.1.1.2.2.1.1 | ColumnrcSlotIndex | not-accessible | current | slot index based 0 |
| 1.3.6.1.4.1.8886.6.1.1.2.2.1.2 | ColumnrcSlotPortStart | read-only | current | the start number of port in this slot |
| 1.3.6.1.4.1.8886.6.1.1.2.2.1.3 | ColumnrcSlotPortNum | read-only | current | the number of ports in this slot |
| 1.3.6.1.4.1.8886.6.1.1.2.2.1.4 | ColumnrcSlotType | read-only | current | slot type |
| 1.3.6.1.4.1.8886.6.1.1.3 | NodercSwitchConfig | |||
| 1.3.6.1.4.1.8886.6.1.1.3.1 | ScalarrcMacAgingTime | read-write | current | The value based 10 is the aging time for MAC address. Aging will be disable when aging time was (0) |
| 1.3.6.1.4.1.8886.6.1.1.3.2 | ScalarrcStormControlBcastEnable | read-write | mandatory | Set the Storm control for broadcast on the interface to enable(1) or disable(2). |
| 1.3.6.1.4.1.8886.6.1.1.3.3 | ScalarrcStormControlMcastEnable | read-write | mandatory | Set the Storm control for multicast on the interface to enable(1) or disable(2). |
| 1.3.6.1.4.1.8886.6.1.1.3.4 | ScalarrcStormControlDlfEnable | read-write | mandatory | Set the Storm control for DLF on the interface to enable(1) or disable(2). |
| 1.3.6.1.4.1.8886.6.1.1.3.5 | ScalarrcStormControlpps | read-write | mandatory | The limit number for storm control on the interface . |
| 1.3.6.1.4.1.8886.6.1.1.3.6 | ScalarrcStormControlbps | read-write | mandatory | The limit number for storm control on the interface . |
| 1.3.6.1.4.1.8886.6.1.1.3.7 | ScalarrcStormControlRatio | read-write | mandatory | storm control limit ratio |
| 1.3.6.1.4.1.8886.6.1.1.3.8 | ScalarrcStormControlBurst | read-write | mandatory | Set burst length when storm control open on the interface. . |
| 1.3.6.1.4.1.8886.6.1.1.3.9 | ScalarrcStpEnable | read-write | mandatory | The enabled/disabled status of STP for the bridge entity. |
| 1.3.6.1.4.1.8886.6.1.1.3.10 | ScalarrcSvlEnable | read-write | mandatory | share vlan mode enable or disable |
| 1.3.6.1.4.1.8886.6.1.1.3.11 | ScalarrcGarpEnable | read-write | mandatory | GARP enable or disable |
| 1.3.6.1.4.1.8886.6.1.1.3.12 | ScalarrcLacpEnable | read-write | mandatory | share vlan mode enable or disable |
| 1.3.6.1.4.1.8886.6.1.1.3.13 | ScalarrcVlanSpaceNum | read-write | obsolete | The system supports at most rcVlanSpaceSize vlans, so the vlan ID increases at rcVlanSpaceSize step over. |
| 1.3.6.1.4.1.8886.6.1.1.3.14 | ScalarrcPvidSpaceNum | read-write | obsolete | The system supports at most rcPvidSpaceSize vlans, so the vlan ID increases at rcPvidSpaceSize step over. |
| 1.3.6.1.4.1.8886.6.1.1.3.15 | ScalarrcLoopbackDetectInterval | read-write | current | Interval of sending loopback-detect packet. |
| 1.3.6.1.4.1.8886.6.1.1.3.16 | ScalarrcArpAgingTime | read-write | deprecated | arp timeout |
| 1.3.6.1.4.1.8886.6.1.1.3.17 | ScalarrcBpduTransPorts | read-write | current | The ports translating BPDU packets. |
| 1.3.6.1.4.1.8886.6.1.1.3.18 | ScalarrcDot1xTransPorts | read-write | current | The ports translating Dot1x packets. |
| 1.3.6.1.4.1.8886.6.1.1.3.19 | ScalarrcLacpTransPorts | read-write | current | The ports translating Lacp packets. |
| 1.3.6.1.4.1.8886.6.1.1.3.20 | ScalarrcGarpTransPorts | read-write | current | The ports translating Garp packets. |
| 1.3.6.1.4.1.8886.6.1.1.3.21 | ScalarrcGmrpTransPorts | read-write | current | The ports translating Gmrp packets. |
| 1.3.6.1.4.1.8886.6.1.1.3.22 | ScalarrcGvrpTransPorts | read-write | current | The ports translating Gvrp packets. |
| 1.3.6.1.4.1.8886.6.1.1.3.23 | ScalarrcIpRouting | read-write | current | start or stop system routing function . this is a commnd MIB variable . |
| 1.3.6.1.4.1.8886.6.1.1.3.24 | ScalarrcStaticRouteDistance | read-write | current | system static route distance value . this is a commnd MIB variable . |
| 1.3.6.1.4.1.8886.6.1.1.3.25 | ScalarrcFastRoute | read-write | current | true for fast route and false for normal route . |
| 1.3.6.1.4.1.8886.6.1.1.3.26 | ScalarrcDlfForwardingEnable | read-write | mandatory | whether forwarding DLF packets . |
| 1.3.6.1.4.1.8886.6.1.1.3.27 | ScalarrcLoopbackDetectVlan | read-write | mandatory | loopback-detection packet belongs to which VLAN. |
| 1.3.6.1.4.1.8886.6.1.1.3.28 | ScalarrcLoopbackDetectDestAddr | read-write | mandatory | destination MAC address of loopback-detection packet. |
| 1.3.6.1.4.1.8886.6.1.1.3.29 | ScalarrcMaxAllowedFrameLength | read-write | mandatory | the maximum packet size for the switch. |
| 1.3.6.1.4.1.8886.6.1.1.3.30 | ScalarrcSvlDefaultVlan | read-write | mandatory | default vlan which the mac address is also learned to. |
| 1.3.6.1.4.1.8886.6.1.1.3.31 | ScalarrcTelnetMaxSessions | read-write | current | Max sessions device telnet server permits. '0' indicates that device won't permits any telnet connect. |
| 1.3.6.1.4.1.8886.6.1.1.3.32 | ScalarrcTelnetAcceptPorts | read-write | current | Ports that access telnet connect request to telnet server on device. |
| 1.3.6.1.4.1.8886.6.1.1.3.33 | ScalarrcVlanMacLearning | read-write | current | Enable or disable source MAC address learning on VLAN. |
| 1.3.6.1.4.1.8886.6.1.1.3.34 | ScalarrcConsoleEnable | read-write | current | Enable or disable console connect. |
| 1.3.6.1.4.1.8886.6.1.1.3.35 | ScalarrcStormControlOperpps | read-only | mandatory | The actual limit number for storm control on the interface . |
| 1.3.6.1.4.1.8886.6.1.1.3.36 | ScalarrcStormControlOperbps | read-only | mandatory | The actual limit number for storm control on the interface . |
| 1.3.6.1.4.1.8886.6.1.1.3.37 | ScalarrcOperMaxAllowedFrameLength | read-only | mandatory | The actual maximum packet size for the switch. |
| 1.3.6.1.4.1.8886.6.1.1.3.38 | ScalarrcTrapBindipEnable | read-write | current | Enable or disable rapBindip.DEFVAL { disable } |
| 1.3.6.1.4.1.8886.6.1.1.4 | NodercPortInfoConfig | |||
| 1.3.6.1.4.1.8886.6.1.1.4.1 | TablercPortTable | not-accessible | current | A table of switch port and associated properties. |
| 1.3.6.1.4.1.8886.6.1.1.4.1.1 | RowrcPortEntry | not-accessible | current | Table entry for switch port control and status information. |
| 1.3.6.1.4.1.8886.6.1.1.4.1.1.1 | ColumnrcPortIndex | read-only | current | An index based 1 that uniquely identifies a system interface. |
| 1.3.6.1.4.1.8886.6.1.1.4.1.1.2 | ColumnrcPortType | read-only | current | port type,same as slot type. |
| 1.3.6.1.4.1.8886.6.1.1.4.1.1.3 | ColumnrcSlotTableIndex | read-only | current | the index of slot which this port is in. |
| 1.3.6.1.4.1.8886.6.1.1.4.1.1.4 | ColumnrcSlotPortIndex | read-only | current | index of this port in the slot |
| 1.3.6.1.4.1.8886.6.1.1.4.1.1.5 | ColumnrcPortAdminStatus | read-write | current | The desired state of the interface. |
| 1.3.6.1.4.1.8886.6.1.1.4.1.1.6 | ColumnrcPortOperStatus | read-only | current | The current operational state of the interface. |
| 1.3.6.1.4.1.8886.6.1.1.4.1.1.7 | ColumnrcPortDuplexSpeedSet | read-write | current | The desired speed and duplex for this interface. If the selected control is not possible on the interface, a value of illegal(99) is returned. If the port type… |
| 1.3.6.1.4.1.8886.6.1.1.4.1.1.8 | ColumnrcPortDuplexSpeedGet | read-only | current | The actual speed and duplex for this interface. If the interface is not configured for an acceptable value, a value of illegal(99) is returned. A value of unkn… |
| 1.3.6.1.4.1.8886.6.1.1.4.1.1.9 | ColumnrcPortFlowControlEnable | read-write | mandatory | Set the flow control on the interface to enable(1) or disable(2). |
| 1.3.6.1.4.1.8886.6.1.1.4.1.1.10 | ColumnrcPortMacLearningEnable | read-write | mandatory | Set the learning ability on the interface to enable(1) or disable(2). |
| 1.3.6.1.4.1.8886.6.1.1.4.1.1.11 | ColumnrcPortMacThreshold | read-write | mandatory | The Mac limit number on the interface or interface-vlan. |
| 1.3.6.1.4.1.8886.6.1.1.4.1.1.12 | ColumnrcPortStormControlBcastEnable | read-write | mandatory | Set the broadcast storm control on the interface to enable(1) or disable(2). |
| 1.3.6.1.4.1.8886.6.1.1.4.1.1.13 | ColumnrcPortStormControlMcastEnable | read-write | mandatory | Set the multicast storm control on the interface to enable(1) or disable(2). |
| 1.3.6.1.4.1.8886.6.1.1.4.1.1.14 | ColumnrcPortStormControlDlfEnable | read-write | mandatory | Set the DLF storm control on the interface to enable(1) or disable(2). |
| 1.3.6.1.4.1.8886.6.1.1.4.1.1.15 | ColumnrcPortStormControlBurst | read-write | mandatory | Set burst length when storm control open on the interface. . |
| 1.3.6.1.4.1.8886.6.1.1.4.1.1.16 | ColumnrcPortStormControlLimit | read-write | mandatory | The limit number for storm control on this port . |
| 1.3.6.1.4.1.8886.6.1.1.4.1.1.17 | ColumnrcPortStormControlLimitRatio | read-write | mandatory | storm control limit ratio on this port |
| 1.3.6.1.4.1.8886.6.1.1.4.1.1.18 | ColumnrcPortDefaultPriority | read-write | mandatory | The received untaged frames are forwarded to a proper queue according to this default priority. |
| 1.3.6.1.4.1.8886.6.1.1.4.1.1.19 | ColumnrcPortLoopbackDetectEnable | read-write | current | Loopback detect of this port is on or off. |
| 1.3.6.1.4.1.8886.6.1.1.4.1.1.20 | ColumnrcPortLoopbackDetectSrcPort | read-only | current | The source port(it sends loopback-detect packets) makes of loop with loopback port. |
| 1.3.6.1.4.1.8886.6.1.1.4.1.1.21 | ColumnrcPortProtected | read-write | mandatory | Traffic between protected port group members are blocked. |
| 1.3.6.1.4.1.8886.6.1.1.4.1.1.22 | ColumnrcPortFlowControlRecvEnable | read-write | mandatory | Set the flow control on receive direction of the interface to enable(1) or disable(2). |
| 1.3.6.1.4.1.8886.6.1.1.4.1.1.23 | ColumnrcPortFlowControlSendEnable | read-write | mandatory | Set the flow control on sender direction of the interface to enable(1) or disable(2). |
| 1.3.6.1.4.1.8886.6.1.1.4.1.1.24 | ColumnrcPortFlowControlRecvStatus | read-only | mandatory | The flow control status on receive direction of the interface to enable(1) or disable(2). |
| 1.3.6.1.4.1.8886.6.1.1.4.1.1.25 | ColumnrcPortFlowControlSendStatus | read-only | mandatory | The flow control status on sender direction of the interface to enable(1) or disable(2). |
| 1.3.6.1.4.1.8886.6.1.1.4.1.1.26 | ColumnrcPortLoopbackDetectDownTime | read-write | mandatory | time of loopback port shutdown. |
| 1.3.6.1.4.1.8886.6.1.1.4.1.1.27 | ColumnrcPortMediaAttachType | read-only | current | media attachment type of this Ether like interface. |
| 1.3.6.1.4.1.8886.6.1.1.4.1.1.28 | ColumnrcPortMediaAttachCapability | read-only | current | Medium type and capability of media attachment units. It is different with rcPortType which identifys the capability of the Ether like interface. |
| 1.3.6.1.4.1.8886.6.1.1.4.1.1.29 | ColumnrcPortMDIXMode | read-write | current | Automatic MDI Crossover mode of a port/PHY |
| 1.3.6.1.4.1.8886.6.1.1.4.1.1.30 | ColumnrcPortMDIXStatus | read-write | current | Automatic MDI Crossover mode of a port/PHY |
| 1.3.6.1.4.1.8886.6.1.1.4.1.1.31 | ColumnrcportDiscPKts | read-only | current | The number of packets which were the difference between the total number of packets received on the interface and all packets transmitted out of the interface |
| 1.3.6.1.4.1.8886.6.1.1.4.1.1.32 | ColumnrcPortMacThresholdVlan | read-write | mandatory | when the Mac limits mac-thredshold on the interface-vlan, it indicates the VlanId;when the mac limits mac-thredshold on interface, its value is 4095. |
| 1.3.6.1.4.1.8886.6.1.1.4.1.1.33 | ColumnrcPortPhysicalStatus | read-write | mandatory | The current physical state of the interface. |
| 1.3.6.1.4.1.8886.6.1.1.4.1.1.34 | ColumnrcPortLinkUpDelayTime | read-write | mandatory | The port link delay time. |
| 1.3.6.1.4.1.8886.6.1.1.4.2 | TablercComboPortTable | not-accessible | current | A table of Combo port and associated properties. |
| 1.3.6.1.4.1.8886.6.1.1.4.2.1 | RowrcComboPortEntry | not-accessible | current | Table entry for Combo port status information. |
| 1.3.6.1.4.1.8886.6.1.1.4.2.1.1 | ColumnrcComboIndex | not-accessible | current | An index based 1 that uniquely identifies a Ether like interface. |
| 1.3.6.1.4.1.8886.6.1.1.4.2.1.2 | ColumnrcComboPortIndex | not-accessible | current | An index for media attachment on Combo that 'rcComboIndex' uniquely identifies a Ether like interface. |
| 1.3.6.1.4.1.8886.6.1.1.4.2.1.3 | ColumnrcComboPortType | read-only | current | port type identfies capability of Ether like interface. |
| 1.3.6.1.4.1.8886.6.1.1.4.2.1.4 | ColumnrcComboPortMediaAttachType | read-only | current | media attachment type of Combo port. |
| 1.3.6.1.4.1.8886.6.1.1.4.2.1.5 | ColumnrcComboPortActiveStatus | read-only | current | used to identify whether this Combo port currently be in the active state. |
| 1.3.6.1.4.1.8886.6.1.1.4.2.1.6 | ColumnrcComboPortMediaAttachCapability | read-only | current | Medium type and capability of media attachment units. It is different with rcComboPortType which identifys the capability of the Ether like interface |
| 1.3.6.1.4.1.8886.6.1.1.4.3 | TablercPortStormControlTable | not-accessible | current | A table of ports' storm control properties. |
| 1.3.6.1.4.1.8886.6.1.1.4.3.1 | RowrcPortStormControlEntry | not-accessible | current | Table entry for ports' storm control information. |
| 1.3.6.1.4.1.8886.6.1.1.4.3.1.1 | ColumnrcPortStormControlPortIndex | not-accessible | current | An index based 1 that uniquely identifies a Ether like interface. |
| 1.3.6.1.4.1.8886.6.1.1.4.3.1.2 | ColumnrcPortStormControlPktType | not-accessible | current | An index that uniquely identifies packet type for storm control. |
| 1.3.6.1.4.1.8886.6.1.1.4.3.1.3 | ColumnrcPortStormControlUnit | read-write | current | unit of value for storm control. |
| 1.3.6.1.4.1.8886.6.1.1.4.3.1.4 | ColumnrcPortStormControlMaxValue | read-write | current | Max value for storm control. |
| 1.3.6.1.4.1.8886.6.1.1.5 | NodercLoopbackTrap | |||
| 1.3.6.1.4.1.8886.6.1.1.5.1 | NotificationrcLoopbackLinkUpTrap | current | A linkDown trap signifies that the port identified by rcPortIndex change to link up state from link down. | |
| 1.3.6.1.4.1.8886.6.1.1.5.2 | NotificationrcLoopbackLinkDownTrap | current | A linkDown trap signifies that the port identified by rcPortIndex change to link down state from link up. | |
| 1.3.6.1.4.1.8886.6.1.1.6 | NodercPorConnectorChangeTrap | |||
| 1.3.6.1.4.1.8886.6.1.1.6.1 | NotificationrcPortConnectorInsertTrap | current | To notify NMS that connector has been inserted. If 'rcPortMediaAttachType' is 'combo' NMS need check 'rcComboPortTable' for deciding which combo port is insert… | |
| 1.3.6.1.4.1.8886.6.1.1.6.2 | NotificationrcPortConnectorRemoveTrap | current | To notify NMS that connector has been removed. If 'rcPortMediaAttachType' is 'combo' NMS need check 'rcComboPortTable' for deciding which combo port is removed. | |
| 1.3.6.1.4.1.8886.6.1.1.8 | NodercPortMappingInfoConfig | |||
| 1.3.6.1.4.1.8886.6.1.1.8.1 | TablercUspPortToUspMappingTable | not-accessible | current | The table describes how the port map to the USP. |
| 1.3.6.1.4.1.8886.6.1.1.8.1.1 | RowrcUspPortToUspMappingEntry | not-accessible | current | Defines an entry in the rcUspPortToUspMappingTable.The index is rcPortIndex,while is unique in raisecom private mib. |
| 1.3.6.1.4.1.8886.6.1.1.8.1.1.1 | ColumnrcUspPortToUspMappingUnitIndex | read-only | current | The unit index which port is mapped to. |
| 1.3.6.1.4.1.8886.6.1.1.8.1.1.2 | ColumnrcUspPortToUspMappingSlotIndex | read-only | current | The slot index which port is mapped to. |
| 1.3.6.1.4.1.8886.6.1.1.8.1.1.3 | ColumnrcUspPortToUspMappingPortIndex | read-only | current | The port index which port is mapped to. |
| 1.3.6.1.4.1.8886.6.1.1.8.2 | TablercUspUspToPortMappingTable | not-accessible | current | The table describes how the USP map to the port. |
| 1.3.6.1.4.1.8886.6.1.1.8.2.1 | RowrcUspUspToPortMappingEntry | not-accessible | current | Defines an entry in the rcUspUspToPortMappingTable.The indexes are rcUspUspToPortMappingUnitIndex,rcUspUspToPortMappingSlotIndex and rcUspUspToPortMappingPortI… |
| 1.3.6.1.4.1.8886.6.1.1.8.2.1.1 | ColumnrcUspUspToPortMappingUnitIndex | not-accessible | current | The unit index which is mapped to the port. |
| 1.3.6.1.4.1.8886.6.1.1.8.2.1.2 | ColumnrcUspUspToPortMappingSlotIndex | not-accessible | current | The slot index which is mapped to the port. |
| 1.3.6.1.4.1.8886.6.1.1.8.2.1.3 | ColumnrcUspUspToPortMappingPortIndex | not-accessible | current | The port index which is mapped to the port. |
| 1.3.6.1.4.1.8886.6.1.1.8.2.1.4 | ColumnrcUspPortIndex | read-only | current | The port index which the USP is mapped to. |
| 1.3.6.1.4.1.8886.6.1.1.8.3 | ScalarrcUspUnitNum | read-only | current | The total unit number. |
| 1.3.6.1.4.1.8886.6.1.1.8.4 | TablercUspUnitTable | not-accessible | current | The table describes the detail of unit. |
| 1.3.6.1.4.1.8886.6.1.1.8.4.1 | RowrcUspUnitEntry | not-accessible | current | Defines an entry in the rcUspUnitTable.The index is rcUspUnitIndex. |
| 1.3.6.1.4.1.8886.6.1.1.8.4.1.1 | ColumnrcUspUnitIndex | not-accessible | current | The port index which the USP is mapped to. |
| 1.3.6.1.4.1.8886.6.1.1.8.4.1.2 | ColumnrcUspUnitSlotNum | read-only | current | The total slot num which the corresponding unit has. |
| 1.3.6.1.4.1.8886.6.1.1.8.4.1.3 | ColumnrcUspUnitPortNum | read-only | current | The total port num which the corresponding unit has. |
| 1.3.6.1.4.1.8886.6.1.1.8.5 | TablercUspSlotTable | not-accessible | current | The table describes the detail of slot. |
| 1.3.6.1.4.1.8886.6.1.1.8.5.1 | RowrcUspSlotEntry | not-accessible | current | Defines an entry in the rcUspSlotTable.The indexes are rcUspSlotUnitIndex and rcUspSlotSlotIndex. |
| 1.3.6.1.4.1.8886.6.1.1.8.5.1.1 | ColumnrcUspSlotUnitIndex | not-accessible | current | The unit index which a slot belongs to. |
| 1.3.6.1.4.1.8886.6.1.1.8.5.1.2 | ColumnrcUspSlotSlotIndex | not-accessible | current | The slot index. |
| 1.3.6.1.4.1.8886.6.1.1.8.5.1.3 | ColumnrcUspSlotSlotType | read-only | current | The slot type. |
| 1.3.6.1.4.1.8886.6.1.1.8.5.1.4 | ColumnrcUspSlotRightSubcardType | read-only | current | The type of subcard which is suitable to the slot. |
| 1.3.6.1.4.1.8886.6.1.1.8.5.1.5 | ColumnrcUspSlotActualSubcardType | read-only | current | The type of subcard which is inserted to the slot. |
| 1.3.6.1.4.1.8886.6.1.1.8.5.1.6 | ColumnrcUspSlotSerial | read-only | current | The serial number of slot. |
| 1.3.6.1.4.1.8886.6.1.1.8.5.1.7 | ColumnrcUspSlotHardVersion | read-only | current | The hard version of slot. |
| 1.3.6.1.4.1.8886.6.1.1.8.5.1.8 | ColumnrcUspSlotSoftwareVersion | read-only | current | The soft version of slot. |
| 1.3.6.1.4.1.8886.6.1.1.8.5.1.9 | ColumnrcUspSlotPortStart | read-only | current | The global port index this slot starts from. |
| 1.3.6.1.4.1.8886.6.1.1.8.5.1.10 | ColumnrcUspSlotPortNum | read-only | current | The number of ports this slot has. |
| 1.3.6.1.4.1.8886.6.1.1.8.5.1.11 | ColumnrcUspSlotSlotState | read-only | current | The slot State. |
| 1.3.6.1.4.1.8886.6.1.1.8.6 | TablercUspIfToUspMappingTable | not-accessible | current | The table describes how the IF map to the USP. |
| 1.3.6.1.4.1.8886.6.1.1.8.6.1 | RowrcUspIfToUspMappingEntry | not-accessible | current | Defines an entry in the rcUspIfToUspMappingTable.The index is ifIndex,while is unique in raisecom private mib. |
| 1.3.6.1.4.1.8886.6.1.1.8.6.1.1 | ColumnrcUspIfToUspMappingUnitIndex | read-only | current | The unit index which IF is mapped to. |
| 1.3.6.1.4.1.8886.6.1.1.8.6.1.2 | ColumnrcUspIfToUspMappingSlotIndex | read-only | current | The slot index which IF is mapped to. |
| 1.3.6.1.4.1.8886.6.1.1.8.6.1.3 | ColumnrcUspIfToUspMappingPortIndex | read-only | current | The port index which IF is mapped to. |
| 1.3.6.1.4.1.8886.6.1.1.8.6.1.4 | ColumnrcUspIfType | read-only | current | The IF type which IF is mapped to. |
| 1.3.6.1.4.1.8886.6.1.1.8.6.1.5 | ColumnrcUspIfState | read-only | current | The IF State. |
| 1.3.6.1.4.1.8886.6.1.1.8.7 | TablercUspUspToIfMappingTable | not-accessible | current | The table describes how the USP map to the IF. |
| 1.3.6.1.4.1.8886.6.1.1.8.7.1 | RowrcUspUspToIfMappingEntry | not-accessible | current | Defines an entry in the rcUspUspToIfMappingTable.The indexes are rcUspUspToIfMappingUnitIndex,rcUspUspToIfMappingSlotIndex,rcUspUspToIfMappingPortIndex and rcU… |
| 1.3.6.1.4.1.8886.6.1.1.8.7.1.1 | ColumnrcUspUspToIfMappingUnitIndex | not-accessible | current | The unit index which is mapped to the IF. |
| 1.3.6.1.4.1.8886.6.1.1.8.7.1.2 | ColumnrcUspUspToIfMappingSlotIndex | not-accessible | current | The slot index which is mapped to the IF. |
| 1.3.6.1.4.1.8886.6.1.1.8.7.1.3 | ColumnrcUspUspToIfMappingPortIndex | not-accessible | current | The port index which is mapped to the IF. |
| 1.3.6.1.4.1.8886.6.1.1.8.7.1.4 | ColumnrcUspIfTypeIndex | not-accessible | current | The port type which is mapped to the IF. |
| 1.3.6.1.4.1.8886.6.1.1.8.7.1.5 | ColumnrcUspIfIndex | read-only | current | The If Index which is mapped to the IF. |