SWITCHING-SYSTEMS-MIB
437 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.114 | Nodesynernetics | |||
| 1.3.6.1.4.1.114.1 | NodeswitchingSystems | |||
| 1.3.6.1.4.1.114.1.3 | NodecorebuilderProductsI | |||
| 1.3.6.1.4.1.114.1.4 | NodeswitchingSystemsMib | |||
| 1.3.6.1.4.1.114.1.4.1 | NodeswSysSystem | |||
| 1.3.6.1.4.1.114.1.4.1 | NodeswSysSystemOverTemperatureEvent | The trap that is generated when the system temperature exceeds a certain threshold. | ||
| 1.3.6.1.4.1.114.1.4.1.1 | ScalarswSysSystemId | read-only | mandatory | The unique identifier assigned to this system during manufacturing. |
| 1.3.6.1.4.1.114.1.4.1.2 | ScalarswSysSystemType | read-only | mandatory | The type of system. |
| 1.3.6.1.4.1.114.1.4.1.3 | ScalarswSysSystemName | read-write | mandatory | The text string describing this system. |
| 1.3.6.1.4.1.114.1.4.1.4 | ScalarswSysSystemManufacturer | read-only | mandatory | The text string describing the manufacturer of this system. |
| 1.3.6.1.4.1.114.1.4.1.5 | ScalarswSysSystemHardwareRevision | read-only | mandatory | The revision level of the system, contained in two octets. The first octet indicates the artwork revision, and the second octet indicates the rework level. |
| 1.3.6.1.4.1.114.1.4.1.6 | ScalarswSysSystemMemorySize | read-only | mandatory | The amount of memory (RAM), in bytes, present on the system processor board. |
| 1.3.6.1.4.1.114.1.4.1.7 | ScalarswSysSystemFlashMemorySize | read-only | mandatory | The amount of flash memory, in bytes, present on the system processor board. |
| 1.3.6.1.4.1.114.1.4.1.8 | ScalarswSysSystemNvMemorySize | read-only | mandatory | The amount of non-volatile memory, in bytes, present on the system processor board. |
| 1.3.6.1.4.1.114.1.4.1.9 | ScalarswSysSystemSoftwareRevision | read-only | mandatory | The revision number of the Switching Systems software. Each byte indicates the following: byte 0: major release number. byte 1: minor release number. byte 2: u… |
| 1.3.6.1.4.1.114.1.4.1.10 | ScalarswSysSystemBuildTime | read-only | mandatory | The build time of the system software. |
| 1.3.6.1.4.1.114.1.4.1.11 | ScalarswSysSystemSnmpRevision | read-only | mandatory | The revision number of the SNMP agent implementation. |
| 1.3.6.1.4.1.114.1.4.1.12 | ScalarswSysSystemRequestedSnmpMode | read-write | mandatory | This object describes the requested SNMP mode for the system. The value of this object indicates the mode that will become effective following a reboot of the … |
| 1.3.6.1.4.1.114.1.4.1.13 | ScalarswSysSystemCurrentSnmpMode | read-only | mandatory | This object describes the currently active SNMP mode for the system. Note that only a subset of the above values may be valid for some systems. |
| 1.3.6.1.4.1.114.1.4.1.14 | ScalarswSysSystemAction | read-write | mandatory | This object, when read, always returns the value other(1). Setting this object to the value reset(2) causes a reset of the system. Setting this object to the v… |
| 1.3.6.1.4.1.114.1.4.1.15 | ScalarswSysSystemOvertemperature | read-only | mandatory | This object indicates the current overtemperature status for the system. If the system does not support overtemperature detection, this object returns notSuppo… |
| 1.3.6.1.4.1.114.1.4.1.16 | ScalarswSysSystemFanFailure | read-only | mandatory | This object indicates the current fan status for the system. If the system does not support fan failure detection, this object returns notSupported. |
| 1.3.6.1.4.1.114.1.4.1.17 | ScalarswSysSystemProtocolMask | read-only | mandatory | This object is a bit mask that indicates which protocols exist in the software image currently loaded in memory. The value of this OBJECT is a sum. It initiall… |
| 1.3.6.1.4.1.114.1.4.1.18 | ScalarswSysSystemConsoleAccess | read-write | mandatory | This object determines whether another device can remotely access the system console via Telnet, Rlogin, or modem port. An existing remote session will not be … |
| 1.3.6.1.4.1.114.1.4.1.19 | ScalarswSysSystemConsoleReadPwd | read-write | mandatory | This object is the console read-access password. |
| 1.3.6.1.4.1.114.1.4.1.20 | ScalarswSysSystemConsoleWritePwd | read-write | mandatory | This object is the console write-access password. The read-write community string is required for access to this object. |
| 1.3.6.1.4.1.114.1.4.1.21 | ScalarswSysSystemConsoleAdminPwd | read-write | mandatory | This object is the console admin-access password. The read-write community string is required for access to this object. |
| 1.3.6.1.4.1.114.1.4.1.22 | ScalarswSysSystemDateTime | read-write | mandatory | The current date and time as reflected by the system clock in the format mm/dd/yy hh:mm:ss xM. |
| 1.3.6.1.4.1.114.1.4.1.23 | ScalarswSysSystemDSTime | read-write | mandatory | This parameter specifies the displacement, in minutes, from non-daylight savings time. The swSysDSTime object, along with the swSysTimeZone object, allows the … |
| 1.3.6.1.4.1.114.1.4.1.24 | ScalarswSysSystemTimeZone | read-write | mandatory | This parameter specifies, in minutes, displacement of the system west of Greenwich. A negative number for this parameter indicates how many minutes displacemen… |
| 1.3.6.1.4.1.114.1.4.1.25 | ScalarswSysSystemCurrentFddiStationMode | read-only | mandatory | This object describes the current FDDI station mode for systems that support multi-station mode. |
| 1.3.6.1.4.1.114.1.4.1.26 | ScalarswSysSystemRequestedFddiStationMode | read-write | mandatory | This object describes the requested FDDI station mode for systems that support multi-station mode. The requested mode will become current during the next syste… |
| 1.3.6.1.4.1.114.1.4.1.27 | NodeswSysSystemLog | |||
| 1.3.6.1.4.1.114.1.4.1.27.1 | ScalarswSysSystemLogEntryCurrentCount | read-only | mandatory | The number of entries currently recorded in the system log. |
| 1.3.6.1.4.1.114.1.4.1.27.2 | ScalarswSysSystemLogMaxSize | read-only | mandatory | The maximum number of events that can be recorded in the system log. |
| 1.3.6.1.4.1.114.1.4.1.27.3 | ScalarswSysSystemLogSeverityThreshold | read-write | mandatory | This object determines the miminum serverety level of events recorded in the system log. For example, if the swSysSysteLogSeverityThreshold is set to errors(3)… |
| 1.3.6.1.4.1.114.1.4.1.27.4 | TableswSysSystemLogTable | not-accessible | mandatory | This table provides information on recorded system events. |
| 1.3.6.1.4.1.114.1.4.1.27.4.1 | RowswSysSystemLogEntry | not-accessible | mandatory | A system log entry. |
| 1.3.6.1.4.1.114.1.4.1.27.4.1.1 | ColumnswSysSystemLogIndex | read-only | mandatory | The index of the log entry relative to this entry. |
| 1.3.6.1.4.1.114.1.4.1.27.4.1.2 | ColumnswSysSystemLogSeverityLevel | read-only | mandatory | Indicates the severity level of the log entry. |
| 1.3.6.1.4.1.114.1.4.1.27.4.1.3 | ColumnswSysSystemLogDateTime | read-only | mandatory | Indicates the date and time of the log event and is formatted as follows: MM:DD:YY HH:MM:SS. |
| 1.3.6.1.4.1.114.1.4.1.27.4.1.4 | ColumnswSysSystemLogFacility | read-only | mandatory | The facility which entered the event in the log. fcmlmm(6) represents those events which may be common to the Lanplex Management Module (LMM) and the FDDI Conc… |
| 1.3.6.1.4.1.114.1.4.1.27.4.1.5 | ColumnswSysSystemLogMessage | read-only | mandatory | The recorded log message. |
| 1.3.6.1.4.1.114.1.4.1.28 | ScalarswSysSystemBaseMACAddress | read-only | mandatory | The base MAC address for the system. |
| 1.3.6.1.4.1.114.1.4.1.29 | ScalarswSysSystemMACAddressCount | read-only | mandatory | The number of MAC addresses allocated to this system. |
| 1.3.6.1.4.1.114.1.4.1.30 | ScalarswSysSystemChassisSerialNumber | read-only | mandatory | The serial number of the chassis. |
| 1.3.6.1.4.1.114.1.4.1.31 | ScalarswSysSystemFPMemorySize | read-only | mandatory | The amount of frame processor memory (RAM), in bytes. |
| 1.3.6.1.4.1.114.1.4.1.32 | ScalarswSysSystemBufferSize | read-only | mandatory | The amount of buffer memory, in bytes. |
| 1.3.6.1.4.1.114.1.4.2 | NodeswSysPowerSupplyFailureEvent | The trap that is generated when a power supply unit fails. | ||
| 1.3.6.1.4.1.114.1.4.2 | NodeswSysSlot | |||
| 1.3.6.1.4.1.114.1.4.2.1 | ScalarswSysSlotCount | read-only | mandatory | The count of slots in the chassis. |
| 1.3.6.1.4.1.114.1.4.2.2 | TableswSysSlotTable | not-accessible | mandatory | A list of slot entries. A single entry exists in this list for each slot in the chassis. |
| 1.3.6.1.4.1.114.1.4.2.2.1 | RowswSysSlotEntry | not-accessible | mandatory | A slot entry contains information about a particular slot. |
| 1.3.6.1.4.1.114.1.4.2.2.1.1 | ColumnswSysSlotIndex | read-only | mandatory | The index of the slot identified by this entry. |
| 1.3.6.1.4.1.114.1.4.2.2.1.2 | ColumnswSysSlotBoardType | read-only | mandatory | The type of board residing in the slot identified by this entry. |
| 1.3.6.1.4.1.114.1.4.2.2.1.3 | ColumnswSysSlotBoardRevision | read-only | mandatory | The revision number of the board in the slot identified by this entry. If the slot is empty, or the revision is unknown this object returns a zero length strin… |
| 1.3.6.1.4.1.114.1.4.2.2.1.4 | ColumnswSysSlotBoardStatus | read-only | mandatory | The status of the board in the slot identified by this entry. |
| 1.3.6.1.4.1.114.1.4.2.2.1.5 | ColumnswSysSlotBoardName | read-only | mandatory | The text string describing the board in the slot identified by this entry. |
| 1.3.6.1.4.1.114.1.4.2.2.1.6 | ColumnswSysSlotBoardNameAbbrev | read-only | mandatory | The abbreviation used to describe the board in the slot identified by this entry. |
| 1.3.6.1.4.1.114.1.4.2.2.1.7 | ColumnswSysSlotEthernetPortCount | read-only | mandatory | The count of ethernet ports in the slot identified by this entry. |
| 1.3.6.1.4.1.114.1.4.2.2.1.8 | ColumnswSysSlotFddiMacCount | read-only | mandatory | The count of FDDI MACs in the slot identified by this entry. |
| 1.3.6.1.4.1.114.1.4.2.2.1.9 | ColumnswSysSlotFddiPortCount | read-only | mandatory | The count of FDDI ports in the slot identified by this entry. |
| 1.3.6.1.4.1.114.1.4.2.2.1.10 | ColumnswSysSlotOvertemperature | read-only | mandatory | This object indicates the current overtemperature status for the slot. If the slot does not support overtemperature detection, this object returns notSupported. |
| 1.3.6.1.4.1.114.1.4.2.2.1.11 | ColumnswSysSlotTokenRingPortCount | read-only | mandatory | The count of TokenRing ports in the slot identified by this entry. |
| 1.3.6.1.4.1.114.1.4.2.2.1.12 | ColumnswSysSlotBoardRevStr | read-only | mandatory | This revision number of the board in the slot identified by this entry. If the slot is empty, or the revision is unknown this object returns a zero length stri… |
| 1.3.6.1.4.1.114.1.4.2.2.1.13 | ColumnswSysSlotConverterBad | read-only | mandatory | This object indicates the current status +12V->+5V converter for the slot. If the slot does not support +12V->+5V converter detection, this object returns notS… |
| 1.3.6.1.4.1.114.1.4.3 | NodeswSysChassisSlotOverTemperatureEvent | The trap that is generated when the temperature of a board in a particular slot exceeds a certain threshold. | ||
| 1.3.6.1.4.1.114.1.4.3 | NodeswSysControlPanel | |||
| 1.3.6.1.4.1.114.1.4.3.1 | ScalarswSysControlPanelHardwareRevision | read-only | mandatory | An 8-bit value specifying the revision level of the control panel hardware. |
| 1.3.6.1.4.1.114.1.4.3.2 | ScalarswSysControlPanelSoftwareRevision | read-only | mandatory | An 8-bit value specifying the revision level of the control panel software. |
| 1.3.6.1.4.1.114.1.4.3.3 | ScalarswSysControlPanelLines | read-only | mandatory | The number of lines in the control panel display. |
| 1.3.6.1.4.1.114.1.4.3.4 | ScalarswSysControlPanelColumns | read-only | mandatory | The number of columns in the control panel display. |
| 1.3.6.1.4.1.114.1.4.3.5 | ScalarswSysControlPanelText | read-only | mandatory | The currently displayed text in the control panel display. |
| 1.3.6.1.4.1.114.1.4.3.6 | ScalarswSysControlPanelAccess | read-write | mandatory | This object determines whether modifications to system configuration are allowed via the Control Panel |
| 1.3.6.1.4.1.114.1.4.4 | NodeswSysChassisSlotInsertEvent | The trap that is generated when a board is inserted into a particular slot. | ||
| 1.3.6.1.4.1.114.1.4.4 | NodeswSysPowerSupply | |||
| 1.3.6.1.4.1.114.1.4.4.1 | ScalarswSysPowerSupplyCount | read-only | mandatory | The count of power supplies in the system. |
| 1.3.6.1.4.1.114.1.4.4.2 | TableswSysPowerSupplyStatusTable | not-accessible | mandatory | A list of power supply status entries. |
| 1.3.6.1.4.1.114.1.4.4.2.1 | RowswSysPowerSupplyStatusEntry | not-accessible | mandatory | A power supply status entry contains information about a particular power supply. |
| 1.3.6.1.4.1.114.1.4.4.2.1.1 | ColumnswSysPowerSupplyStatusIndex | read-only | mandatory | The unique index of the power supply identified by this entry. |
| 1.3.6.1.4.1.114.1.4.4.2.1.2 | ColumnswSysPowerSupplyStatus | read-only | mandatory | This object represents the power supply status. The value is a sum. It initially takes on the value 0, then for each type which is active, 2 raised to a power … |
| 1.3.6.1.4.1.114.1.4.4.2.1.3 | ColumnswSysPowerSupplyStatusSupported | read-only | mandatory | This object represents the various power supply status types which are supported. The value is a sum. It initially takes on the value 0, then for each type whi… |
| 1.3.6.1.4.1.114.1.4.5 | NodeswSysChassisSlotExtractEvent | The trap that is generated when a board is extracted from a particular slot. | ||
| 1.3.6.1.4.1.114.1.4.5 | NodeswSysSnmp | |||
| 1.3.6.1.4.1.114.1.4.5.1 | ScalarswSysSnmpAgentId | read-only | mandatory | The unique id for this SNMP agent within the system. |
| 1.3.6.1.4.1.114.1.4.5.2 | ScalarswSysSnmpInternalAgentTrapMask | read-write | mandatory | This value is a bit string that indicates which traps are enabled for transmit to other agents in the system. The octet string value is treated as a 64-bit int… |
| 1.3.6.1.4.1.114.1.4.5.3 | ScalarswSysSnmpInternalAgentTrapDestinationMask | read-write | mandatory | A value which indicates to which other agents in the system traps should be sent. The value is a sum. It initially takes on the value 0, then for each agent wh… |
| 1.3.6.1.4.1.114.1.4.5.4 | ScalarswSysSnmpProxyInternalRequests | read-write | deprecated | This object determines if this agent will proxy requests to other agents in the system. If the value of this object is true(1), this agent will proxy requests … |
| 1.3.6.1.4.1.114.1.4.5.5 | ScalarswSysSnmpInternalProxyRequestMaxAge | read-write | mandatory | The maximum time, in seconds, an internal proxy request will remain queued waiting for a response before being discarded. Note that when the value of swSysSnmp… |
| 1.3.6.1.4.1.114.1.4.5.6 | ScalarswSysSnmpProxyInternalTraps | read-write | deprecated | This object determines if this agent will generate proxy traps for those traps received from other agents in the system. If the value of this object is true(1)… |
| 1.3.6.1.4.1.114.1.4.5.7 | TableswSysSnmpInternalProxyTable | not-accessible | mandatory | A list of SNMP internal agent proxy entries. An entry in this table exists for each agent in the system that can be reached by this agent via the internal prox… |
| 1.3.6.1.4.1.114.1.4.5.7.1 | RowswSysSnmpInternalProxyEntry | not-accessible | mandatory | An entry identifies the communities available for communicating with another agent in the system via the internal proxy mechanism. |
| 1.3.6.1.4.1.114.1.4.5.7.1.1 | ColumnswSysSnmpInternalProxyAgentId | read-only | mandatory | The id of the agent identified by this entry. |
| 1.3.6.1.4.1.114.1.4.5.7.1.2 | ColumnswSysSnmpInternalProxyAccessClass | read-only | mandatory | The access to MIB objects supported by the agent identified by this entry provided by this agent, when using the community string identified by the correspondi… |
| 1.3.6.1.4.1.114.1.4.5.7.1.3 | ColumnswSysSnmpInternalProxyCommunity | read-only | mandatory | A community which allows access to MIB objects supported by the agent identified by this entry. |
| 1.3.6.1.4.1.114.1.4.6 | NodeswSysAgent | |||
| 1.3.6.1.4.1.114.1.4.6 | NodeswSysBridgeAddressThresholdEvent | The trap that is generated when the number of addresses stored in the bridge reaches swSysBridgeAddressThreshold. | ||
| 1.3.6.1.4.1.114.1.4.6.1 | ScalarswSysAgentRequestMaxAge | read-write | mandatory | The maximum time, in seconds, a local SNMP request will remain queued waiting for a response before being discarded. |
| 1.3.6.1.4.1.114.1.4.6.2 | ScalarswSysAgentProxyRemoteSmtRequests | read-write | deprecated | This object determines if this agent will proxy SMT requests to other FDDI stations. If the value of this object is true(1), this agent will proxy SMT requests… |
| 1.3.6.1.4.1.114.1.4.6.3 | ScalarswSysAgentRemoteSmtProxyRequestMaxAge | read-write | mandatory | The maximum time, in seconds, an SMT proxy request will remain queued waiting for a response before being discarded. Note that when the value of swSysAgentProx… |
| 1.3.6.1.4.1.114.1.4.6.4 | ScalarswSysAgentProxyRemoteSmtEvents | read-write | mandatory | This object determines if this agent will generate traps for SMT events occuring at other stations. If the value of this object is true(1), this agent will gen… |
| 1.3.6.1.4.1.114.1.4.6.5 | TableswSysAgentTrapDescriptionTable | not-accessible | mandatory | This table contains a listing of trap descriptions for each trap supported by this agent. This provides a relationship between a trap index, and the trap enter… |
| 1.3.6.1.4.1.114.1.4.6.5.1 | RowswSysAgentTrapDescriptionTableEntry | not-accessible | mandatory | Information relating a trap index to a specific trap enterprise oid and trap number. |
| 1.3.6.1.4.1.114.1.4.6.5.1.1 | ColumnswSysAgentTrapDescriptionIndex | read-only | mandatory | A unique index corresponding to the trap described by this entry. This value of this object corresponding to a particular trap will remain constant accross sys… |
| 1.3.6.1.4.1.114.1.4.6.5.1.2 | ColumnswSysAgentTrapEnterprise | read-only | mandatory | The enterpise under which the trap identified by this entry is defined. |
| 1.3.6.1.4.1.114.1.4.6.5.1.3 | ColumnswSysAgentTrapNumber | read-only | mandatory | The number of the trap identified by this entry, within the enterprise where it is defined. |
| 1.3.6.1.4.1.114.1.4.6.6 | TableswSysAgentTrapDestinationTable | not-accessible | mandatory | This table contains information specifying which traps will be transmitted to a given destination address. The table is indexed by the destination address type… |
| 1.3.6.1.4.1.114.1.4.6.6.1 | RowswSysAgentTrapDestinationTableEntry | not-accessible | mandatory | Information relating a set of traps and a destination address to which each trap in ths set will be transmitted when it is generated. To create a new entry, se… |
| 1.3.6.1.4.1.114.1.4.6.6.1.1 | ColumnswSysAgentTrapDestinationAddressType | read-only | mandatory | The type of address identified by this entry. |
| 1.3.6.1.4.1.114.1.4.6.6.1.2 | ColumnswSysAgentTrapDestinationAddress | read-only | mandatory | The address, of the type specified by the corresponding value of swSysAgentTrapDestinationAddressType, to which the set of traps identified by this entry are t… |
| 1.3.6.1.4.1.114.1.4.6.6.1.3 | ColumnswSysAgentTrapDestinationTrapMask | read-write | mandatory | This value is a bit string that indicates which traps are enabled for the address identified by this entry. The octet string value is treated as a 64-bit value… |
| 1.3.6.1.4.1.114.1.4.6.6.1.4 | ColumnswSysAgentTrapDestinationEntryStatus | read-write | mandatory | The status of the trap destination table entry. Setting this object to invalid(1) has the effect of removing the corresponding entry from the table. |
| 1.3.6.1.4.1.114.1.4.6.7 | ScalarswSysAgentReadCommunity | read-write | mandatory | This object is the read community string when access is made via SNMP, see RFC1157. |
| 1.3.6.1.4.1.114.1.4.6.8 | ScalarswSysAgentReadWriteCommunity | read-write | mandatory | This object is the read-write community string when access is made via SNMP, see RFC1157. The read-write community string is required to access this object. |
| 1.3.6.1.4.1.114.1.4.7 | NodeswSysInterface | |||
| 1.3.6.1.4.1.114.1.4.7 | NodeswSysSystemFanFailureEvent | The trap that is generated when one of the system fans fails. | ||
| 1.3.6.1.4.1.114.1.4.7.1 | TableswSysInterfaceLocationTable | not-accessible | mandatory | A list of interface location entries. A single entry exists in this list for each interface managed by this agent. |
| 1.3.6.1.4.1.114.1.4.7.1.1 | RowswSysInterfaceLocationEntry | not-accessible | mandatory | An interface location entry describes the location of a particular interface managed by this agent. |
| 1.3.6.1.4.1.114.1.4.7.1.1.1 | ColumnswSysInterfaceLocationIfIndex | read-only | mandatory | The value of the MIB-II ifIndex corresponding to the interface identified by this entry. |
| 1.3.6.1.4.1.114.1.4.7.1.1.2 | ColumnswSysInterfaceLocationInterfaceType | read-only | mandatory | The type of the physical implementation of the interface identified by this entry. |
| 1.3.6.1.4.1.114.1.4.7.1.1.3 | ColumnswSysInterfaceLocationType | read-only | mandatory | The type of location where the interface identified by this entry is physically located. |
| 1.3.6.1.4.1.114.1.4.7.1.1.4 | ColumnswSysInterfaceLocationTypeIndex | read-only | mandatory | The index of the location identified by the corresponding instance of swSysInterfaceLocationType where the interface identified by this entry is physically loc… |
| 1.3.6.1.4.1.114.1.4.7.1.1.5 | ColumnswSysInterfaceLocationLocalIndex | read-only | mandatory | The local index of the interface identified by this entry relative to its type specified by the corresponding value of swSysInterfaceLocationInterfaceType, and… |
| 1.3.6.1.4.1.114.1.4.7.1.1.6 | ColumnswSysInterfaceLocationSystemModuleIndex | read-only | mandatory | The system module index of the interface idnetified by this entry. Ths index can be used to acquire the module information from the s2SysModuleCardGroup and th… |
| 1.3.6.1.4.1.114.1.4.8 | NodeswModuleCardSysOverTemperatureEvent | The trap that is generated when the temperature of the system exceeds a certain threshold. This trap is generated from agents that support the swSysModuleCardI… | ||
| 1.3.6.1.4.1.114.1.4.8 | NodeswSysEthernetPort | |||
| 1.3.6.1.4.1.114.1.4.8.1 | ScalarswSysEthernetPortCount | read-only | mandatory | The count of ethernet ports managed by this agent. |
| 1.3.6.1.4.1.114.1.4.8.2 | TableswSysEthernetPortTable | not-accessible | mandatory | A list of ethernet port entries. A single entry exists in this list for each ethernet port managed by this agent. |
| 1.3.6.1.4.1.114.1.4.8.2.1 | RowswSysEthernetPortEntry | not-accessible | mandatory | An ethernet port entry contains information about a particular ethernet port managed by this agent. |
| 1.3.6.1.4.1.114.1.4.8.2.1.1 | ColumnswSysEthernetPortIndex | read-only | mandatory | The index of the ethernet port identified by this entry, relative to this agent. |
| 1.3.6.1.4.1.114.1.4.8.2.1.2 | ColumnswSysEthernetPortIfIndex | read-only | mandatory | The value of the MIB-II ifIndex corresponding to the ethernet port identified by this entry. |
| 1.3.6.1.4.1.114.1.4.8.2.1.3 | ColumnswSysEthernetPortLabel | read-write | mandatory | An ASCII text string describing the ethernet port identified by this entry. |
| 1.3.6.1.4.1.114.1.4.8.2.1.4 | ColumnswSysEthernetPortLinkStatus | read-only | mandatory | The current value of the link status for the ethernet port identified by this entry. |
| 1.3.6.1.4.1.114.1.4.8.2.1.5 | ColumnswSysEthernetPortType | read-only | mandatory | Specific port type description for the ethernet port identified by this entry. |
| 1.3.6.1.4.1.114.1.4.8.3 | TableswSysEthernetPortRateTable | not-accessible | mandatory | A list of ethernet port rate entries. A single entry exists in this list for each ethernet port, managed by this agent, which supports rate information. |
| 1.3.6.1.4.1.114.1.4.8.3.1 | RowswSysEthernetPortRateEntry | not-accessible | mandatory | An ethernet port rate entry contains rate statistics for a particular ethernet port managed by this agent. Rate statistics are calculated based on a one second… |
| 1.3.6.1.4.1.114.1.4.8.3.1.1 | ColumnswSysEthernetPortRateIndex | read-only | mandatory | The index of the ethernet port identified by this entry, relative to this agent. |
| 1.3.6.1.4.1.114.1.4.8.3.1.2 | ColumnswSysEthernetPortRateByteReceiveRate | read-only | mandatory | The average number of bytes received per second by the ethernet port identified by this entry during the most recent sampling period. |
| 1.3.6.1.4.1.114.1.4.8.3.1.3 | ColumnswSysEthernetPortRatePeakByteReceiveRate | read-only | mandatory | The peak value of swSysEthernetPortRateByteReceiveRate since the system was last initialized for the ethernet port identified by this entry. |
| 1.3.6.1.4.1.114.1.4.8.3.1.4 | ColumnswSysEthernetPortRateFrameReceiveRate | read-only | mandatory | The average number of frames received per second by the ethernet port identified by this entry during the most recent sampling period. |
| 1.3.6.1.4.1.114.1.4.8.3.1.5 | ColumnswSysEthernetPortRatePeakFrameReceiveRate | read-only | mandatory | The peak value of swSysEthernetPortRateFrameReceiveRate since the system was last initialized for the ethernet port identified by this entry. |
| 1.3.6.1.4.1.114.1.4.8.3.1.6 | ColumnswSysEthernetPortRateByteTransmitRate | read-only | mandatory | The average number of bytes transmitted per second by the ethernet port identified by this entry during the most recent sampling period. |
| 1.3.6.1.4.1.114.1.4.8.3.1.7 | ColumnswSysEthernetPortRatePeakByteTransmitRate | read-only | mandatory | The peak value of swSysEthernetPortRateByteTransmitRate since the system was last initialized for the ethernet port identified by this entry. |
| 1.3.6.1.4.1.114.1.4.8.3.1.8 | ColumnswSysEthernetPortRateFrameTransmitRate | read-only | mandatory | The average number of frames transmitted per second by the ethernet port identified by this entry during the most recent sampling period. |
| 1.3.6.1.4.1.114.1.4.8.3.1.9 | ColumnswSysEthernetPortRatePeakFrameTransmitRate | read-only | mandatory | The peak value of swSysEthernetPortRateFrameTransmitRate since the system was last initialized for the ethernet port identified by this entry. |
| 1.3.6.1.4.1.114.1.4.9 | NodeswModuleCardInsertEvent | The trap that is generated when a board is inserted into a particular modular slot. This trap is generated from agents that support the swSysModuleCardInfoTabl… | ||
| 1.3.6.1.4.1.114.1.4.9 | NodeswSysSmt | |||
| 1.3.6.1.4.1.114.1.4.9.1 | ScalarswSysSmtCount | read-only | mandatory | The count of SMTs managed by this agent. |
| 1.3.6.1.4.1.114.1.4.9.4 | TableswSysSmtFddiMacBeaconTable | not-accessible | mandatory | A list of FDDI MAC beacon entries. A single entry exists in this list for each FDDI MAC, managed by this agent, which supports MAC beacon history. |
| 1.3.6.1.4.1.114.1.4.9.4.1 | RowswSysSmtFddiMacBeaconEntry | not-accessible | mandatory | An FDDI MAC beacon entry contains information about a particular FDDI MAC's beacon history. |
| 1.3.6.1.4.1.114.1.4.9.4.1.1 | ColumnswSysSmtFddiMacBeaconSmtIndex | read-only | mandatory | The index of the SMT instance identified by this entry, relative to this agent. |
| 1.3.6.1.4.1.114.1.4.9.4.1.2 | ColumnswSysSmtFddiMacBeaconIndex | read-only | mandatory | The index of the FDDI MAC identified by this entry, within the SMT identified by this entry. |
| 1.3.6.1.4.1.114.1.4.9.4.1.3 | ColumnswSysSmtFddiMacBeaconHistory | read-only | mandatory | This object gives a history of the most recent beacon information received on the FDDI MAC identified by this entry. It can contain up to a maximum of eight re… |
| 1.3.6.1.4.1.114.1.4.9.5 | TableswSysSmtFddiMacRateTable | not-accessible | mandatory | A list of FDDI MAC rate entries. A single entry exists in this list for each FDDI MAC, managed by this agent, which supports rate statistics. |
| 1.3.6.1.4.1.114.1.4.9.5.1 | RowswSysSmtFddiMacRateEntry | not-accessible | mandatory | An FDDI MAC rate entry contains rate statistics for a particular FDDI MAC managed by this agent. Rate statistics are calculated based on a one second sampling … |
| 1.3.6.1.4.1.114.1.4.9.5.1.1 | ColumnswSysSmtFddiMacRateSmtIndex | read-only | mandatory | The index of the SMT instance identified by this entry, relative to this agent. |
| 1.3.6.1.4.1.114.1.4.9.5.1.2 | ColumnswSysSmtFddiMacRateIndex | read-only | mandatory | The index of the FDDI MAC identified by this entry, within the SMT identified by this entry. |
| 1.3.6.1.4.1.114.1.4.9.5.1.3 | ColumnswSysSmtFddiMacRateByteReceiveRate | read-only | mandatory | The average number of bytes received per second by the FDDI MAC identified by this entry during the most recent sampling period. |
| 1.3.6.1.4.1.114.1.4.9.5.1.4 | ColumnswSysSmtFddiMacRatePeakByteReceiveRate | read-only | mandatory | The peak value of swSysSmtFddiMacByteReceiveRate since the system was last initialized for the FDDI MAC identified by this entry. |
| 1.3.6.1.4.1.114.1.4.9.5.1.5 | ColumnswSysSmtFddiMacRateFrameReceiveRate | read-only | mandatory | The average number of frames received per second by the FDDI MAC identified by this entry during the most recent sampling period. |
| 1.3.6.1.4.1.114.1.4.9.5.1.6 | ColumnswSysSmtFddiMacRatePeakFrameReceiveRate | read-only | mandatory | The peak value of swSysSmtFddiMacRateFrameReceiveRate since the system was last initialized for the FDDI MAC identified by this entry. |
| 1.3.6.1.4.1.114.1.4.9.5.1.7 | ColumnswSysSmtFddiMacRateByteTransmitRate | read-only | mandatory | The average number of bytes transmitted per second by the FDDI MAC identified by this entry during the most recent sampling period. |
| 1.3.6.1.4.1.114.1.4.9.5.1.8 | ColumnswSysSmtFddiMacRatePeakByteTransmitRate | read-only | mandatory | The peak value of swSysSmtFddiMacByteTransmitRate since the system was last initialized for the FDDI MAC identified by this entry. |
| 1.3.6.1.4.1.114.1.4.9.5.1.9 | ColumnswSysSmtFddiMacRateFrameTransmitRate | read-only | mandatory | The average number of frames transmitted per second by the FDDI MAC identified by this entry during the most recent sampling period. |
| 1.3.6.1.4.1.114.1.4.9.5.1.10 | ColumnswSysSmtFddiMacRatePeakFrameTransmitRate | read-only | mandatory | The peak value of swSysSmtFddiMacFrameTransmitRate since the system was last initialized for the FDDI MAC identified by this entry. |
| 1.3.6.1.4.1.114.1.4.9.6 | TableswSysSmtFddiPortTable | not-accessible | mandatory | A list of FDDI port entries. A single entry exists in this list for each FDDI port managed by this agent. |
| 1.3.6.1.4.1.114.1.4.9.6.1 | RowswSysSmtFddiPortEntry | not-accessible | mandatory | An FDDI port entry contains information about a particular FDDI port managed by this agent. |
| 1.3.6.1.4.1.114.1.4.9.6.1.1 | ColumnswSysSmtFddiPortSmtIndex | read-only | mandatory | The index of the SMT instance identified by this entry, relative to this agent. |
| 1.3.6.1.4.1.114.1.4.9.6.1.2 | ColumnswSysSmtFddiPortIndex | read-only | mandatory | The index of the FDDI port identified by this entry, within the SMT identified by this entry. |
| 1.3.6.1.4.1.114.1.4.9.6.1.3 | ColumnswSysSmtFddiPortLocationType | read-only | mandatory | The type of location where the FDDI port identified by this entry is physically located. |
| 1.3.6.1.4.1.114.1.4.9.6.1.4 | ColumnswSysSmtFddiPortLocationTypeIndex | read-only | mandatory | The index of the location identified by the corresponding instance of swSysSmtFddiPortLocationType where the FDDI port identified by this entry is physically l… |
| 1.3.6.1.4.1.114.1.4.9.6.1.5 | ColumnswSysSmtFddiPortLocationLocalIndex | read-only | mandatory | The local index of the FDDI port identified by this entry relative to the location specified by the corresponding values of swSysSmtFddiPortLocationType and sw… |
| 1.3.6.1.4.1.114.1.4.9.6.1.6 | ColumnswSysSmtFddiPortLabel | read-write | mandatory | An ASCII text string describing the FDDI port identified by this entry. |
| 1.3.6.1.4.1.114.1.4.9.7 | TableswSysSmtFddiMacLocationTable | not-accessible | mandatory | An FDDI MAC Location table contains information to assign an FDDI MAC to a different Location. The system must be rebooted after all changes to this table are … |
| 1.3.6.1.4.1.114.1.4.9.7.1 | RowswSysSmtFddiMacLocationEntry | not-accessible | mandatory | An FDDI MAC entry contains information to assign an FDDI MAC to a different Location. |
| 1.3.6.1.4.1.114.1.4.9.7.1.1 | ColumnswSysSmtFddiMacLocationSmtIndex | read-only | mandatory | The index of the SMT instance identified by this entry, relative to the agent. |
| 1.3.6.1.4.1.114.1.4.9.7.1.2 | ColumnswSysSmtFddiMacLocationIndex | read-only | mandatory | The index of the FDDI MAC instance identified by this entry, relative to the SMT identified by this entry. |
| 1.3.6.1.4.1.114.1.4.9.7.1.3 | ColumnswSysSmtFddiMacCurrentLocation | read-only | mandatory | Indicates whether the MAC identified by this entry is assigned to a backplane FDDI station (internal) or an FDDI station configured on a module (external.) |
| 1.3.6.1.4.1.114.1.4.9.7.1.4 | ColumnswSysSmtFddiMacRequestedLocation | read-write | mandatory | The Location which the MAC identified by this entry is to be assigned to during the next reboot. |
| 1.3.6.1.4.1.114.1.4.9.7.1.5 | ColumnswSysSmtFddiMacAvailableLocation | read-only | mandatory | Indicates the Location(s) available for this MAC. A mac Location which can be modified to either the interanl backplane or an external FDDI port is indicated b… |
| 1.3.6.1.4.1.114.1.4.9.8 | TableswSysSmtFddiMacStationTable | not-accessible | mandatory | An FDDI station MAC table contains information to assign an FDDI MAC to an FDDI Station. The system must be rebooted after all changes to this table are comple… |
| 1.3.6.1.4.1.114.1.4.9.8.1 | RowswSysSmtFddiMacStationEntry | not-accessible | mandatory | An FDDI MAC entry contains information to assign an FDDI MAC to an FDDI Station. |
| 1.3.6.1.4.1.114.1.4.9.8.1.1 | ColumnswSysSmtFddiMacStationSmtIndex | read-only | mandatory | The index of the SMT instance identified by this entry, relative to this agent. |
| 1.3.6.1.4.1.114.1.4.9.8.1.2 | ColumnswSysSmtFddiMacStationIndex | read-only | mandatory | The index of the MAC instance identified by this entry, relative to the SMT identified by this entry. |
| 1.3.6.1.4.1.114.1.4.9.8.1.3 | ColumnswSysSmtFddiMacCurrentStation | read-only | mandatory | Indicates which FDDI station that the FDDI MAC identified by this entry is assigned to. A value of 0 indicates that the mac is assigned to an external station.… |
| 1.3.6.1.4.1.114.1.4.9.8.1.4 | ColumnswSysSmtFddiMacRequestedStation | read-write | mandatory | Indicates which FDDI station the FDDI MAC identified by this entry will be set to during the next system reboot. A value of 0 indicates an external station. Ot… |
| 1.3.6.1.4.1.114.1.4.9.8.1.5 | ColumnswSysSmtFddiMacAvailableStations | read-only | mandatory | This value is a sum. Setting of the first bit (LSB) indicates that the MAC can be assigned to an external station. Available backplane stations are indicated b… |
| 1.3.6.1.4.1.114.1.4.9.9 | TableswSysSmtFddiPortStationTable | not-accessible | mandatory | An FDDI station Port table contains information to assign an FDDI Port to an FDDI Station. The system must be rebooted after all changes to this table are comp… |
| 1.3.6.1.4.1.114.1.4.9.9.1 | RowswSysSmtFddiPortStationEntry | not-accessible | mandatory | An FDDI Port entry contains information to assign an FDDI Port to an FDDI Station. |
| 1.3.6.1.4.1.114.1.4.9.9.1.1 | ColumnswSysSmtFddiPortStationSmtIndex | read-only | mandatory | The index of the SMT instance identified by this entry, relative to this agent. |
| 1.3.6.1.4.1.114.1.4.9.9.1.2 | ColumnswSysSmtFddiPortStationIndex | read-only | mandatory | The index of the Port instance identified by this entry, relative to the SMT indentified by this entry. |
| 1.3.6.1.4.1.114.1.4.9.9.1.3 | ColumnswSysSmtFddiPortCurrentStation | read-only | mandatory | Indicates which FDDI station the FDDI Port identified by this entry is assigned to. A value of 0 indicates that the Port is assigned to an external station. Ot… |
| 1.3.6.1.4.1.114.1.4.9.9.1.4 | ColumnswSysSmtFddiPortRequestedStation | read-write | mandatory | Indicates which FDDI station the FDDI port identified by this entry will be set to during the next system reboot. A value of 0 indicates an external station. O… |
| 1.3.6.1.4.1.114.1.4.9.9.1.5 | ColumnswSysSmtFddiPortAvailableStations | read-only | mandatory | This value is a sum. Setting of the first bit indicates that the port can be assigned to an external station. Available backplane stations are indicated by add… |
| 1.3.6.1.4.1.114.1.4.10 | NodeswModuleCardExtractEvent | The trap that is generated when a board is extracted from a particular modular slot. This trap is generated from agents that support the swSysModuleCardInfoTab… | ||
| 1.3.6.1.4.1.114.1.4.10 | NodeswSysBridge | |||
| 1.3.6.1.4.1.114.1.4.10.1 | ScalarswSysBridgeCount | read-only | mandatory | The count of bridges managed by this agent. |
| 1.3.6.1.4.1.114.1.4.10.2 | TableswSysBridgeTable | not-accessible | mandatory | A list of bridge entries. A single entry exists in this list for each bridge managed by this agent. |
| 1.3.6.1.4.1.114.1.4.10.2.1 | RowswSysBridgeEntry | not-accessible | mandatory | A bridge entry contains information about a particular bridge managed by this agent. |
| 1.3.6.1.4.1.114.1.4.10.2.1.1 | ColumnswSysBridgeIndex | read-only | mandatory | The index of the bridge identified by this entry, relative to this agent. |
| 1.3.6.1.4.1.114.1.4.10.2.1.2 | ColumnswSysBridgePortCount | read-only | mandatory | The number of bridge ports that the bridge identified by this entry controls. |
| 1.3.6.1.4.1.114.1.4.10.2.1.3 | ColumnswSysBridgeAddressTableSize | read-only | mandatory | The size of the address table for the bridge identified by this entry. |
| 1.3.6.1.4.1.114.1.4.10.2.1.4 | ColumnswSysBridgeAddressTableCount | read-only | mandatory | The current count of addresses in the address table for the bridge identified by this entry. |
| 1.3.6.1.4.1.114.1.4.10.2.1.5 | ColumnswSysBridgeAddressTablePeakCount | read-only | mandatory | The peak count of addresses in the address table for the bridge identified by this entry, since the system was last initialized. |
| 1.3.6.1.4.1.114.1.4.10.2.1.6 | ColumnswSysBridgeAddressThreshold | read-write | mandatory | A reporting threshold for the total number of addresses known for the bridge identified by this entry. When this threshold is reached, the event swSysBridgeAdd… |
| 1.3.6.1.4.1.114.1.4.10.2.1.7 | ColumnswSysBridgeMode | read-write | mandatory | The operational mode of the bridge identified by this entry. Note that bridges which report notSupported(3) will not support sets of this object, and that the … |
| 1.3.6.1.4.1.114.1.4.10.2.1.8 | ColumnswSysBridgeBackbonePort | read-write | mandatory | The number of the port selected as the backbone segment port when the corresponding value of swSysBridgeMode is is expressMode(1). The value of this object can… |
| 1.3.6.1.4.1.114.1.4.10.2.1.9 | ColumnswSysBridgeIpFragmentationEnabled | read-write | mandatory | A flag indicating whether or not IP fragmentation is enabled on this bridge. Note that bridges which report notSupported(3) will not support sets of this objec… |
| 1.3.6.1.4.1.114.1.4.10.2.1.10 | ColumnswSysBridgeTrFddiTranslationMode | read-write | mandatory | The mode used to describe whether the embedded MAC addresses are byte-conjugated in order to convert them from Token Ring format to native FDDI format (and vic… |
| 1.3.6.1.4.1.114.1.4.10.2.1.11 | ColumnswSysBridgeSTPGroupAddress | read-write | mandatory | Spanning tree bridge group address. The address cannot be changed if the spanning tree is enabled (swSysBridgeStpEnabled). |
| 1.3.6.1.4.1.114.1.4.10.2.1.12 | ColumnswSysBridgeSTPEnable | read-write | mandatory | This object indicates if spanning tree bridge feature is enabled or disabled. If enabled this value will equal true(1). |
| 1.3.6.1.4.1.114.1.4.10.2.1.13 | ColumnswSysBridgeIpxSnapTranslationEnable | read-write | mandatory | This object indicates if the IPX 802.3-FDDI SNAP Translation bridge feature is enabled or disabled. If enabled this value will equal true(1). Note, this object… |
| 1.3.6.1.4.1.114.1.4.10.2.1.14 | ColumnswSysBridgeLowLatencyEnable | read-write | mandatory | This object indicates if the bridge low latency feature is enabled or disabled. If enabled this value will equal true(1). Note, this object may not be supporte… |
| 1.3.6.1.4.1.114.1.4.10.2.1.15 | ColumnswSysBridgeVlanMode | read-write | mandatory | This object indicates the VLAN types that this bridge will support. Open mode means that each VLAN within this bridge will be of the Open type; all VLANs withi… |
| 1.3.6.1.4.1.114.1.4.10.3 | TableswSysBridgePortTable | not-accessible | mandatory | A list of bridge port entries. A single entry exists in this list for each bridge port managed by this agent. |
| 1.3.6.1.4.1.114.1.4.10.3.1 | RowswSysBridgePortEntry | not-accessible | mandatory | A bridge port entry contains information about a particular bridge port managed by this agent. |
| 1.3.6.1.4.1.114.1.4.10.3.1.1 | ColumnswSysBridgePortBridgeIndex | read-only | mandatory | The index of the bridge identified by this entry, relative to this agent. |
| 1.3.6.1.4.1.114.1.4.10.3.1.2 | ColumnswSysBridgePortIndex | read-only | mandatory | The index of the bridge port identified by this entry, within the bridge identified by this entry. |
| 1.3.6.1.4.1.114.1.4.10.3.1.3 | ColumnswSysBridgePortIfIndex | read-only | mandatory | The value of the MIB-II ifIndex corresponding to the bridge port identified by this entry. |
| 1.3.6.1.4.1.114.1.4.10.3.1.4 | ColumnswSysBridgePortReceiveMulticastLimit | read-write | mandatory | The maximum number of multicast frames per second that can be received in the sample interval. The sample interval is one second. The default value for this ob… |
| 1.3.6.1.4.1.114.1.4.10.3.1.5 | ColumnswSysBridgePortAddressAction | read-write | mandatory | This object, when read, always returns the value other(1). The behavior of setting this object to each of the acceptable values is as follows: freezeAddress: c… |
| 1.3.6.1.4.1.114.1.4.10.3.1.6 | ColumnswSysBridgePortSpanningTreeFrameReceivedCounts | read-only | mandatory | The number of spanning tree frames received by the bridge port identified by this entry. |
| 1.3.6.1.4.1.114.1.4.10.3.1.7 | ColumnswSysBridgePortReceiveBlockedDiscards | read-only | mandatory | The number of frames discarded by the bridge port identified by this entry because the receiving bridge port was not in the 'forwarding' state. |
| 1.3.6.1.4.1.114.1.4.10.3.1.8 | ColumnswSysBridgePortReceiveMulticastLimitExceededs | read-only | mandatory | The number of times the value of swSysBridgePortReceiveMulticastLimit was exceeded for the port identified by this entry. |
| 1.3.6.1.4.1.114.1.4.10.3.1.9 | ColumnswSysBridgePortReceiveMulticastLimitExceededDiscards | read-only | mandatory | The number of multicast/broadcast frames discarded by the bridge port identified by this entry because the corresponding value of swSysBridgePortReceiveMultica… |
| 1.3.6.1.4.1.114.1.4.10.3.1.10 | ColumnswSysBridgePortReceiveSecurityDiscards | read-only | mandatory | The number of frames discarded by the bridge port identified by this entry because they contained source addresses which were statically configured on another … |
| 1.3.6.1.4.1.114.1.4.10.3.1.11 | ColumnswSysBridgePortReceiveUnknownDiscards | read-only | mandatory | The number of frames discarded by the bridge port identified by this entry because the destination address was unknown. Note that this counter is only valid fo… |
| 1.3.6.1.4.1.114.1.4.10.3.1.12 | ColumnswSysBridgePortReceiveOtherDiscards | read-only | mandatory | The number of frames discarded by the bridge port identified by this entry because they contained either invalid (group) source addresses or source addresses b… |
| 1.3.6.1.4.1.114.1.4.10.3.1.13 | ColumnswSysBridgePortReceiveErrorDiscards | read-only | mandatory | The number of frames discarded by the bridge port identified by this entry because of internal bridge system errors (e.g., hardware and software address table … |
| 1.3.6.1.4.1.114.1.4.10.3.1.14 | ColumnswSysBridgePortSameSegmentDiscards | read-only | mandatory | The number of frames discarded by the bridge port identified by this entry because the destination address is known on the same network segment as the source a… |
| 1.3.6.1.4.1.114.1.4.10.3.1.15 | ColumnswSysBridgePortTransmitBlockedDiscards | read-only | mandatory | The number of frames discarded by the bridge port identified by this entry because the transmitting bridge port was not in the 'forwarding' state. |
| 1.3.6.1.4.1.114.1.4.10.3.1.16 | ColumnswSysBridgePortReceiveAllPathFilteredFrames | read-only | mandatory | The number of frames discarded by the bridge port identified by this entry due to user defined receive all path filters. |
| 1.3.6.1.4.1.114.1.4.10.3.1.17 | ColumnswSysBridgePortReceiveMulticastPathFilteredFrames | read-only | mandatory | The number of frames discarded by the bridge port identified by this entry due to user defined receive multicast path filters. |
| 1.3.6.1.4.1.114.1.4.10.3.1.18 | ColumnswSysBridgePortTransmitAllPathFilteredFrames | read-only | mandatory | The number of frames discarded by the bridge port identified by this entry due to user defined transmit all path filters. |
| 1.3.6.1.4.1.114.1.4.10.3.1.19 | ColumnswSysBridgePortTransmitMulticastPathFilteredFrames | read-only | mandatory | The number of frames discarded by the bridge port identified by this entry due to user defined transmit multicast path filters. |
| 1.3.6.1.4.1.114.1.4.10.3.1.20 | ColumnswSysBridgePortForwardedUnicastFrames | read-only | mandatory | The number of unicast frames which this port forwarded to a single destination port. |
| 1.3.6.1.4.1.114.1.4.10.3.1.21 | ColumnswSysBridgePortForwardedUnicastOctets | read-only | mandatory | The number of octets contained in unicast frames which this port forwarded to a single destination port. |
| 1.3.6.1.4.1.114.1.4.10.3.1.22 | ColumnswSysBridgePortForwardedMulticastFrames | read-only | mandatory | The number of multicast frames which this port forwarded. |
| 1.3.6.1.4.1.114.1.4.10.3.1.23 | ColumnswSysBridgePortForwardedMulticastOctets | read-only | mandatory | The number of octets contained in multicast frames which this port forwarded. |
| 1.3.6.1.4.1.114.1.4.10.3.1.24 | ColumnswSysBridgePortFloodedUnicastFrames | read-only | mandatory | The number of unicast frames which this port flooded to all other ports in the bridge. |
| 1.3.6.1.4.1.114.1.4.10.3.1.25 | ColumnswSysBridgePortFloodedUnicastOctets | read-only | mandatory | The number of octets contained in unicast frames which this port flooded to all other ports in the bridge. |
| 1.3.6.1.4.1.114.1.4.10.3.1.26 | ColumnswSysBridgePortStpMode | read-write | mandatory | The mode of the bridge port. |
| 1.3.6.1.4.1.114.1.4.10.3.1.27 | ColumnswSysBridgePortReceiveMulticastLimitFrameType | read-write | mandatory | This object identifies the frames type(s) that are to be counted when determining if the receive multicast limit has been exceeded for this bridge port. Device… |
| 1.3.6.1.4.1.114.1.4.10.5 | TableswSysBridgePortAddressTable | not-accessible | mandatory | A list of bridge port address information. A single entry exists in this list for each learned address, accross all bridge ports and all bridges managed by thi… |
| 1.3.6.1.4.1.114.1.4.10.5.1 | RowswSysBridgePortAddressEntry | not-accessible | mandatory | An bridge port address entry contains information about a particular bridge port address. To create a new entry, set an instance of swSysBridgePortAddressRemot… |
| 1.3.6.1.4.1.114.1.4.10.5.1.1 | ColumnswSysBridgePortAddressBridgeIndex | read-only | mandatory | The index of the bridge identified by this entry, relative to this agent. |
| 1.3.6.1.4.1.114.1.4.10.5.1.2 | ColumnswSysBridgePortAddressPortIndex | read-only | mandatory | The index of the bridge port identified by this entry, within the bridge identified by this entry. |
| 1.3.6.1.4.1.114.1.4.10.5.1.3 | ColumnswSysBridgePortAddressIndex | read-only | mandatory | The index of this address entry within the bridge address table for the bridge identified by this entry. This index ranges from 1 to the corresponding value of… |
| 1.3.6.1.4.1.114.1.4.10.5.1.4 | ColumnswSysBridgePortAddressRemoteAddress | read-write | mandatory | The remote MAC address detected on the bridge port identified by to this entry. Setting this object results in an attempt to create a new entry in the table. S… |
| 1.3.6.1.4.1.114.1.4.10.5.1.5 | ColumnswSysBridgePortAddressType | read-write | mandatory | This object, when read, always returns the value valid(1). Setting this object to invalid(2) will remove the corresponding address entry from the table. |
| 1.3.6.1.4.1.114.1.4.10.5.1.6 | ColumnswSysBridgePortAddressIsStatic | read-write | mandatory | A value indicating whether this MAC address was statically configured or was dynamically learned. Note that isStatic(1) it the only valid for set operations. |
| 1.3.6.1.4.1.114.1.4.10.5.1.7 | ColumnswSysBridgePortAddressStaticPort | read-only | mandatory | If the corresponding value of the object swSysBridgePortAddressIsStatic is isStatic(1), this object indicates the local bridge port index (as reported by swSys… |
| 1.3.6.1.4.1.114.1.4.10.5.1.8 | ColumnswSysBridgePortAddressAge | read-only | mandatory | This object indicates the time, in seconds, elapsed since a packet containing this address as a source was last seen on the bridge port identified by this entr… |
| 1.3.6.1.4.1.114.1.4.10.6 | ScalarswSysBridgeStpGroupAddress | read-write | obsolete | Spanning tree bridge group address. The address cannot be changed if the spanning tree is enabled (swSysBridgeStpEnabled). This object can now be found under t… |
| 1.3.6.1.4.1.114.1.4.10.7 | ScalarswSysBridgeStpEnable | read-write | obsolete | This object indicates if spanning tree bridge feature is enabled or disabled. If enabled this value will equal true(1). This object can now be found under the … |
| 1.3.6.1.4.1.114.1.4.11 | NodeswSysIpRouter | |||
| 1.3.6.1.4.1.114.1.4.12 | NodeswSysNetworkMonitor | |||
| 1.3.6.1.4.1.114.1.4.12.1 | TableswSysNetworkAnalyzerTable | not-accessible | mandatory | A list of analyzer entries. A single entry exists in this list for each bridge port configured for an analyzer. |
| 1.3.6.1.4.1.114.1.4.12.1.1 | RowswSysNetworkAnalyzerTableEntry | not-accessible | mandatory | An analyzer table entry contains information relating an analyzer port address to the bridge and port index for that analyzer. The effect of creating an entry … |
| 1.3.6.1.4.1.114.1.4.12.1.1.1 | ColumnswSysNetworkAnalyzerBridgeIndex | read-only | mandatory | The index of the bridge relative to this agent where the analyzer identified by this entry is configured. |
| 1.3.6.1.4.1.114.1.4.12.1.1.2 | ColumnswSysNetworkAnalyzerBridgePortIndex | read-only | mandatory | The index of the port relative to the bridge identified by this entry where the analyzer identified by this entry is configured. |
| 1.3.6.1.4.1.114.1.4.12.1.1.3 | ColumnswSysNetworkAnalyzerPhysicalAddress | read-only | mandatory | The physical address of the bridge port identified by the corresponding values of swSysNetworkAnalyzerBridgeIndex and swSysNetworkAnayzerBridgePortIndex. |
| 1.3.6.1.4.1.114.1.4.12.1.1.4 | ColumnswSysNetworkAnalyzerStatus | read-write | mandatory | The status of the entry. Setting the value of a non-existent instance of this object to valid(1) attempts to add the corresponding entry to the table. The effe… |
| 1.3.6.1.4.1.114.1.4.12.2 | TableswSysNetworkPortMonitorTable | not-accessible | mandatory | A list of monitor port entries. A single entry exists in this for each bridge port being monitored. |
| 1.3.6.1.4.1.114.1.4.12.2.1 | RowswSysNetworkPortMonitorTableEntry | not-accessible | mandatory | A port monitor table entry contains information relating a bridge port being monitored with the address of the analyzer which is being used to monitor the port… |
| 1.3.6.1.4.1.114.1.4.12.2.1.1 | ColumnswSysNetworkPortMonitorBridgeIndex | read-only | mandatory | The index of the bridge relative to this agent where the monitored port identified by this entry is located. |
| 1.3.6.1.4.1.114.1.4.12.2.1.2 | ColumnswSysNetworkPortMonitorBridgePortIndex | read-only | mandatory | The index of the port which is being monitored relative to the bridge identified by this entry. |
| 1.3.6.1.4.1.114.1.4.12.2.1.3 | ColumnswSysNetworkPortMonitorAnalyzerAddress | read-write | mandatory | The physical address of the port where the analyzer, which is monitoring the port identified by this entry, is located. Setting the value of a non-existent ins… |
| 1.3.6.1.4.1.114.1.4.12.2.1.4 | ColumnswSysNetworkPortMonitorStatus | read-write | mandatory | The status of the entry. Setting an existing instance of this object to invalid(2) attempts to remove the corresponding entry from the table. The effect of rem… |
| 1.3.6.1.4.1.114.1.4.13 | NodeswSysTokenRingPort | |||
| 1.3.6.1.4.1.114.1.4.13.1 | ScalarswSysTokenRingPortCount | read-only | mandatory | The count of token ring ports managed by this agent. |
| 1.3.6.1.4.1.114.1.4.13.2 | TableswSysTokenRingPortTable | not-accessible | mandatory | A list of token ring port entries. A single entry exists in this list for each token ring port managed by this agent. |
| 1.3.6.1.4.1.114.1.4.13.2.1 | RowswSysTokenRingPortEntry | not-accessible | mandatory | A token ring port entry contains information about a particular token ring port managed by this agent. |
| 1.3.6.1.4.1.114.1.4.13.2.1.1 | ColumnswSysTokenRingPortIndex | read-only | mandatory | The index of the token ring port identified by this entry, relative to this agent. |
| 1.3.6.1.4.1.114.1.4.13.2.1.2 | ColumnswSysTokenRingPortIfIndex | read-only | mandatory | The value of the MIB-II ifIndex corresponding to the token ring port identified by this entry. |
| 1.3.6.1.4.1.114.1.4.13.2.1.3 | ColumnswSysTokenRingPortLabel | read-write | mandatory | An ASCII text string describing the token ring port identified by this entry. |
| 1.3.6.1.4.1.114.1.4.13.2.1.4 | ColumnswSysTokenRingPortInsertStatus | read-only | mandatory | The current value of the link status for the token ring port identified by this entry. |
| 1.3.6.1.4.1.114.1.4.13.2.1.5 | ColumnswSysTokenRingPortType | read-only | mandatory | Specific port type description for the token ring port identified by this entry. |
| 1.3.6.1.4.1.114.1.4.13.2.1.6 | ColumnswSysTokenRingPortMode | read-write | mandatory | The current mode of the port. The default mode (station) is used to connect a hub to the port. Lobe mode is used to direct connect a Token Ring station into th… |
| 1.3.6.1.4.1.114.1.4.13.2.1.7 | ColumnswSysTokenRingPortSpeed | read-write | mandatory | The current speed of the port. The default speed is sixteenMegabit. |
| 1.3.6.1.4.1.114.1.4.13.2.1.8 | ColumnswSysTokenRingPortLineErrors | read-only | mandatory | This counter is incremented when a frame or token is copied or repeated by a station, the E bit is zero in the frame or token and one of the following conditio… |
| 1.3.6.1.4.1.114.1.4.13.2.1.9 | ColumnswSysTokenRingPortBurstErrors | read-only | mandatory | This counter is incremented when a station detects the absence of transitions for five half-bit timers (burst-five error). |
| 1.3.6.1.4.1.114.1.4.13.2.1.10 | ColumnswSysTokenRingPortACErrors | read-only | mandatory | This counter is incremented when a station receives an AMP or SMP frame in which A is equal to C is equal to 0, and then receives another SMP frame with A is e… |
| 1.3.6.1.4.1.114.1.4.13.2.1.11 | ColumnswSysTokenRingPortAbortTransErrors | read-only | mandatory | This counter is incremented when a station transmits an abort delimiter while transmitting. |
| 1.3.6.1.4.1.114.1.4.13.2.1.12 | ColumnswSysTokenRingPortInternalErrors | read-only | mandatory | This counter is incremented when a station recognizes an internal error. |
| 1.3.6.1.4.1.114.1.4.13.2.1.13 | ColumnswSysTokenRingPortLostFrameErrors | read-only | mandatory | This counter is incremented when a station is transmitting and its TRR timer expires. This condition denotes a condition where a transmitting station in strip … |
| 1.3.6.1.4.1.114.1.4.13.2.1.14 | ColumnswSysTokenRingPortReceiveCongestionErrors | read-only | mandatory | This counter is incremented when a station recognizes a frame addressed to its specific address, but has no available buffer space indicating that the station … |
| 1.3.6.1.4.1.114.1.4.13.2.1.15 | ColumnswSysTokenRingPortFrameCopiedErrors | read-only | mandatory | This counter is incremented when a station recognizes a frame addressed to its specific address and detects that the FS field A bits are set to 1 indicating a … |
| 1.3.6.1.4.1.114.1.4.13.2.1.16 | ColumnswSysTokenRingPortTokenErrors | read-only | mandatory | This counter is incremented when a station acting as the active monitor recognizes an error condition that needs a token transmitted. |
| 1.3.6.1.4.1.114.1.4.13.2.1.17 | ColumnswSysTokenRingPortSoftErrors | read-only | mandatory | The number of Soft Errors the interface has detected. It directly corresponds to the number of Report Error MAC frames that this interface has transmitted. Sof… |
| 1.3.6.1.4.1.114.1.4.13.2.1.18 | ColumnswSysTokenRingPortHardErrors | read-only | mandatory | The number of times this interface has detected an immediately recoverable fatal error. It denotes the number of times this interface is either transmitting or… |
| 1.3.6.1.4.1.114.1.4.13.2.1.19 | ColumnswSysTokenRingPortTransmitBeacons | read-only | mandatory | The number of times this interface has transmitted a beacon frame. |
| 1.3.6.1.4.1.114.1.4.13.2.1.20 | ColumnswSysTokenRingPortLobeWires | read-only | mandatory | The number of times the interface has detected an open or short circuit in the lobe data path. The adapter will be closed when this condition occurs. |
| 1.3.6.1.4.1.114.1.4.13.2.1.21 | ColumnswSysTokenRingPortRemoves | read-only | mandatory | The number of times the interface has received a Remove Ring Station MAC frame request. When this frame is received the interface will enter the close state. |
| 1.3.6.1.4.1.114.1.4.13.2.1.22 | ColumnswSysTokenRingPortSingles | read-only | mandatory | The number of times the interface has sensed that it is the only station on the ring. This will happen if the interface is the first one up on a ring, or if th… |
| 1.3.6.1.4.1.114.1.4.13.2.1.23 | ColumnswSysTokenRingPortFreqErrors | read-only | optional | The number of times the interface has detected that the frequency of the incoming signal differs from the expected frequency. |
| 1.3.6.1.4.1.114.1.4.13.2.1.24 | ColumnswSysTokenRingPortRingStatus | read-only | mandatory | The current interface status which can be used to diagnose fluctuating problems that can occur on token rings, after a station has successfully been added to t… |
| 1.3.6.1.4.1.114.1.4.14 | NodeswSysFtGroup | |||
| 1.3.6.1.4.1.114.1.4.14.1 | TableswSysFtTable | not-accessible | mandatory | A list of entries which describe file transfers. |
| 1.3.6.1.4.1.114.1.4.14.1.1 | RowswSysFtTableEntry | not-accessible | mandatory | A description of a particular file transfer entry. |
| 1.3.6.1.4.1.114.1.4.14.1.1.1 | ColumnswSysFtIndex | read-only | mandatory | A unique index used to identifying this entry. |
| 1.3.6.1.4.1.114.1.4.14.1.1.2 | ColumnswSysFtDirection | read-write | mandatory | Specifies the direction of the file transfer. |
| 1.3.6.1.4.1.114.1.4.14.1.1.3 | ColumnswSysFtLocalStorageType | read-write | mandatory | The type of storage on the local system to be used as the source/destination for the file transfer. |
| 1.3.6.1.4.1.114.1.4.14.1.1.4 | ColumnswSysFtLocalResourceType | read-write | mandatory | The type of resource on the local system to be used as the source/destination for the file transfer. |
| 1.3.6.1.4.1.114.1.4.14.1.1.5 | ColumnswSysFtLocalResourceMask | read-write | mandatory | The indices of the resources on the local system to be used as the source/destination for the file transfer. The type of resource to which these indices apply … |
| 1.3.6.1.4.1.114.1.4.14.1.1.6 | ColumnswSysFtLocalResourceAttribute | read-write | mandatory | An identifier which specifies the particular resource attribute on the local system which is the source/destination of the file transfer. The resource(s) to wh… |
| 1.3.6.1.4.1.114.1.4.14.1.1.7 | ColumnswSysFtRemoteAddressType | read-write | mandatory | The type of address which is specified by the corresponding value of swSysFtRemoteAddress. |
| 1.3.6.1.4.1.114.1.4.14.1.1.8 | ColumnswSysFtRemoteAddress | read-write | mandatory | The address of the source/destination file on the remote system. |
| 1.3.6.1.4.1.114.1.4.14.1.1.9 | ColumnswSysFtRemoteFileName | read-write | mandatory | The full path name of the source/destination file on the remote system. |
| 1.3.6.1.4.1.114.1.4.14.1.1.10 | ColumnswSysFtRemoteUserName | read-write | mandatory | The user name to be used when requesting the file transfer to/from the remote system. |
| 1.3.6.1.4.1.114.1.4.14.1.1.11 | ColumnswSysFtRemoteUserPassword | read-write | mandatory | The password to be used when requesting the file transfer to/from the remote system. When read, this object returns a zero length string. Note that, for securi… |
| 1.3.6.1.4.1.114.1.4.14.1.1.12 | ColumnswSysFtForceTransfer | read-write | mandatory | Setting this object to true makes the agent ignore non-fatal (i.e. version/id mismatch) errors encountered during a file transfer request. |
| 1.3.6.1.4.1.114.1.4.14.1.1.13 | ColumnswSysFtBytesTransferred | read-only | mandatory | The number of bytes successfully transferred. |
| 1.3.6.1.4.1.114.1.4.14.1.1.14 | ColumnswSysFtStatus | read-only | mandatory | The status of the file transfer. |
| 1.3.6.1.4.1.114.1.4.14.1.1.15 | ColumnswSysFtDetailedStatus | read-only | mandatory | Detailed status for the transfer for the particular local resource attribute specified by the corresponding values of swSysFtLocalStorageType, swSysFtLocalReso… |
| 1.3.6.1.4.1.114.1.4.14.1.1.16 | ColumnswSysFtDetailedStatusString | read-only | mandatory | Detailed status description for the requested transfer. |
| 1.3.6.1.4.1.114.1.4.14.1.1.17 | ColumnswSysFtOwnerString | read-write | mandatory | A string describing the creator/owner of this entry. |
| 1.3.6.1.4.1.114.1.4.14.1.1.18 | ColumnswSysFtRowStatus | read-write | mandatory | The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified … |
| 1.3.6.1.4.1.114.1.4.14.2 | NodeswSysFtResourceAttributes | |||
| 1.3.6.1.4.1.114.1.4.14.2.1 | NodeswSysFtSystemAttributes | |||
| 1.3.6.1.4.1.114.1.4.14.2.1.1 | NodeswSysFtSystemOperationalCode | |||
| 1.3.6.1.4.1.114.1.4.14.2.1.2 | NodeswSysFtSystemConfiguration | |||
| 1.3.6.1.4.1.114.1.4.14.2.1.3 | NodeswSysFtSystemBridgeFilterCode | |||
| 1.3.6.1.4.1.114.1.4.14.3 | NodeswSysFtDetailedResourceStatus | |||
| 1.3.6.1.4.1.114.1.4.14.3.1 | NodeswSysFtSystemDetailedStatus | |||
| 1.3.6.1.4.1.114.1.4.14.3.1.1 | NodeswSysFtSysStatusNotApplicable | |||
| 1.3.6.1.4.1.114.1.4.14.3.1.2 | NodeswSysFtSysStatusNoImageLabel | |||
| 1.3.6.1.4.1.114.1.4.14.3.1.3 | NodeswSysFtSysStatusConfigIdMismatch | |||
| 1.3.6.1.4.1.114.1.4.14.3.1.4 | NodeswSysFtSysStatusChecksumError | |||
| 1.3.6.1.4.1.114.1.4.14.3.1.5 | NodeswSysFtSysStatusNvRamError | |||
| 1.3.6.1.4.1.114.1.4.14.3.1.6 | NodeswSysFtSysStatusFlashError | |||
| 1.3.6.1.4.1.114.1.4.14.3.1.7 | NodeswSysFtSysStatusNoRoom | |||
| 1.3.6.1.4.1.114.1.4.14.3.1.8 | NodeswSysFtSysBridgeFilterNotApplicable | |||
| 1.3.6.1.4.1.114.1.4.14.3.1.9 | NodeswSysFtSysBridgeFilterSyntaxError | |||
| 1.3.6.1.4.1.114.1.4.14.3.1.10 | NodeswSysFtSysBridgeFilterdownloadError | |||
| 1.3.6.1.4.1.114.1.4.14.3.1.11 | NodeswSysFtSysBridgeFilterNoRoom | |||
| 1.3.6.1.4.1.114.1.4.15 | NodeswSysIpGroup | |||
| 1.3.6.1.4.1.114.1.4.15.1 | NodeswSysIpBaseGroup | |||
| 1.3.6.1.4.1.114.1.4.15.2 | NodeswSysIpInterfaceGroup | |||
| 1.3.6.1.4.1.114.1.4.15.2.1 | ScalarswSysIpInterfaceCount | read-only | mandatory | A count of the total number of IP interfaces configured. |
| 1.3.6.1.4.1.114.1.4.15.2.2 | TableswSysIpInterfaceTable | not-accessible | mandatory | A list of configured IP interfaces. |
| 1.3.6.1.4.1.114.1.4.15.2.2.1 | RowswSysIpInterfaceEntry | not-accessible | mandatory | An individual IP interface. |
| 1.3.6.1.4.1.114.1.4.15.2.2.1.1 | ColumnswSysIpInterfaceIpStackIndex | read-only | mandatory | The index of the IP stack identified by this entry relative to this agent. |
| 1.3.6.1.4.1.114.1.4.15.2.2.1.2 | ColumnswSysIpInterfaceAddr | read-only | mandatory | The IP address of this entry within the IP stack identified within this entry. |
| 1.3.6.1.4.1.114.1.4.15.2.2.1.3 | ColumnswSysIpInterfaceNetMask | read-only | mandatory | The subnet mask associated with this IP interface. The value of the mask is an IP address with all the network bits set to 1 and all the host bits set to 0. |
| 1.3.6.1.4.1.114.1.4.15.2.2.1.4 | ColumnswSysIpInterfaceIndex | read-write | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. lspIPInterfaceIndex maps to the same interface as identified by ifIn… |
| 1.3.6.1.4.1.114.1.4.15.2.2.1.5 | ColumnswSysIpInterfaceBcastAddr | read-write | mandatory | This object represents the value of the least significant bit of this entry's direct broadcast address. For example, a value of one signifies that the host por… |
| 1.3.6.1.4.1.114.1.4.15.2.2.1.6 | ColumnswSysIpInterfaceCost | read-write | mandatory | The route cost metric used for this entry. |
| 1.3.6.1.4.1.114.1.4.15.2.2.1.7 | ColumnswSysIpInterfaceStatus | read-write | mandatory | The status column for this IP interface. This object can be set to: createAndGo(4) destroy(6) The following value may be read: active(1) Setting this object to… |
| 1.3.6.1.4.1.114.1.4.16 | NodeswSysIpxGroup | |||
| 1.3.6.1.4.1.114.1.4.16.1 | NodeswSysIpxBaseGroup | |||
| 1.3.6.1.4.1.114.1.4.16.2 | NodeswSysIpxInterfaceGroup | |||
| 1.3.6.1.4.1.114.1.4.16.2.1 | ScalarswSysIpxInterfaceCount | read-only | mandatory | A count of the total number of IPX interfaces configured. |
| 1.3.6.1.4.1.114.1.4.16.2.2 | TableswSysIpxInterfaceTable | not-accessible | mandatory | A list of configured IPX interfaces. |
| 1.3.6.1.4.1.114.1.4.16.2.2.1 | RowswSysIpxInterfaceEntry | not-accessible | mandatory | An individual IPX interface. |
| 1.3.6.1.4.1.114.1.4.16.2.2.1.1 | ColumnswSysIpxInterfaceIpxStackIndex | read-only | mandatory | The index of the IPX stack identified by this entry relative to this agent. |
| 1.3.6.1.4.1.114.1.4.16.2.2.1.2 | ColumnswSysIpxInterfaceNetNumber | read-only | mandatory | The IPX Network Number of this entry. |
| 1.3.6.1.4.1.114.1.4.16.2.2.1.3 | ColumnswSysIpxInterfaceIfIndex | read-write | mandatory | The ifIndex of the virtual interface that this IPX interface is is configured over. The swSysIpxInterfaceIfIndex identifies a virtual interface, for example a … |
| 1.3.6.1.4.1.114.1.4.16.2.2.1.4 | ColumnswSysIpxInterfaceCost | read-write | mandatory | The cost associated with the IPX address of this entry. |
| 1.3.6.1.4.1.114.1.4.16.2.2.1.5 | ColumnswSysIpxInterfaceFrameType | read-write | mandatory | The frame format used for routing frames on this IPX interface. The framing formats are for ethernet ports. There are two frame formats for FDDI ports: 802.2 a… |
| 1.3.6.1.4.1.114.1.4.16.2.2.1.6 | ColumnswSysIpxInterfaceStatus | read-write | mandatory | The status column for this IPX interface. This OBJECT can be set to: createAndGo(4) destroy(6) The following value may be read: active(1) Setting this object o… |
| 1.3.6.1.4.1.114.1.4.17 | NodeswSysAppleTalkGroup | |||
| 1.3.6.1.4.1.114.1.4.17.1 | NodeswSysAppleTalkBaseGroup | |||
| 1.3.6.1.4.1.114.1.4.17.2 | NodeswSysAppleTalkInterfaceGroup | |||
| 1.3.6.1.4.1.114.1.4.17.2.1 | ScalarswSysAtInterfaceCount | read-only | mandatory | A count of the total number of AppleTalk interfaces configured. |
| 1.3.6.1.4.1.114.1.4.17.2.2 | TableswSysAtInterfaceTable | not-accessible | mandatory | A list of AppleTalk ports for this entity. |
| 1.3.6.1.4.1.114.1.4.17.2.2.1 | RowswSysAtInterfaceEntry | not-accessible | mandatory | An individual appletalk interface entry. Appletalk entries with row status of active(1) cannot be modified but must set to destroy(6) and recreated. |
| 1.3.6.1.4.1.114.1.4.17.2.2.1.1 | ColumnswSysAtInterfaceAtStackIndex | read-write | mandatory | The index of the Appletalk stack identified by this entry relative to this agent. Setting of this object is required for all interface creations. |
| 1.3.6.1.4.1.114.1.4.17.2.2.1.2 | ColumnswSysAtInterfaceNetAddress | read-only | mandatory | The AppleTalk network address configured for this port. |
| 1.3.6.1.4.1.114.1.4.17.2.2.1.3 | ColumnswSysAtInterfaceType | read-write | mandatory | The type of interface that is configured for this port. Setting of this object is required for all interface creations. |
| 1.3.6.1.4.1.114.1.4.17.2.2.1.4 | ColumnswSysAtInterfaceNetStart | read-write | mandatory | The first AppleTalk network address in the range configured for this port. If this port is not a native AppleTalk port, this object shall have the value of two… |
| 1.3.6.1.4.1.114.1.4.17.2.2.1.5 | ColumnswSysAtInterfaceNetEnd | read-write | mandatory | The last AppleTalk network address in the range configured for this port. If the network to which this AppleTalk port is connected is a non-extended network, o… |
| 1.3.6.1.4.1.114.1.4.17.2.2.1.6 | ColumnswSysAtInterfaceZoneDefault | read-write | mandatory | The name of the default zone for this port. If this port only has one zone, that zone is represented here. Setting of this object is mandatory for interfaces w… |
| 1.3.6.1.4.1.114.1.4.17.2.2.1.7 | ColumnswSysAtInterfaceZone1 | read-write | mandatory | Zone name in this entry's zone list. This object may only only be set for interfaces with swSysAtInterfaceType equal to seedInterface(1). |
| 1.3.6.1.4.1.114.1.4.17.2.2.1.8 | ColumnswSysAtInterfaceZone2 | read-write | mandatory | Zone name in this entry's zone list. This object may only only be set for interfaces with swSysAtInterfaceType equal to seedInterface(1). |
| 1.3.6.1.4.1.114.1.4.17.2.2.1.9 | ColumnswSysAtInterfaceZone3 | read-write | mandatory | Zone name in this entry's zone list. This object may only only be set for interfaces with swSysAtInterfaceType equal to seedInterface(1). |
| 1.3.6.1.4.1.114.1.4.17.2.2.1.10 | ColumnswSysAtInterfaceZone4 | read-write | mandatory | Zone name in this entry's zone list. This object may only only be set for interfaces with swSysAtInterfaceType equal to seedInterface(1). |
| 1.3.6.1.4.1.114.1.4.17.2.2.1.11 | ColumnswSysAtInterfaceZone5 | read-write | mandatory | Zone name in this entry's zone list. This object may only only be set for interfaces with swSysAtInterfaceType equal to seedInterface(1). |
| 1.3.6.1.4.1.114.1.4.17.2.2.1.12 | ColumnswSysAtInterfaceZone6 | read-write | mandatory | Zone name in this entry's zone list. This object may only only be set for interfaces with swSysAtInterfaceType equal to seedInterface(1). |
| 1.3.6.1.4.1.114.1.4.17.2.2.1.13 | ColumnswSysAtInterfaceZone7 | read-write | mandatory | Zone name in this entry's zone list. This object may only only be set for interfaces with swSysAtInterfaceType equal to seedInterface(1). |
| 1.3.6.1.4.1.114.1.4.17.2.2.1.14 | ColumnswSysAtInterfaceZone8 | read-write | mandatory | Zone name in this entry's zone list. This object may only only be set for interfaces with swSysAtInterfaceType equal to seedInterface(1). |
| 1.3.6.1.4.1.114.1.4.17.2.2.1.15 | ColumnswSysAtInterfaceZone9 | read-write | mandatory | Zone name in this entry's zone list. This object may only only be set for interfaces with swSysAtInterfaceType equal to seedInterface(1). |
| 1.3.6.1.4.1.114.1.4.17.2.2.1.16 | ColumnswSysAtInterfaceZone10 | read-write | mandatory | Zone name in this entry's zone list. This object may only only be set for interfaces with swSysAtInterfaceType equal to seedInterface(1). |
| 1.3.6.1.4.1.114.1.4.17.2.2.1.17 | ColumnswSysAtInterfaceZone11 | read-write | mandatory | Zone name in this entry's zone list. This object may only only be set for interfaces with swSysAtInterfaceType equal to seedInterface(1). |
| 1.3.6.1.4.1.114.1.4.17.2.2.1.18 | ColumnswSysAtInterfaceZone12 | read-write | mandatory | Zone name in this entry's zone list. This object may only only be set for interfaces with swSysAtInterfaceType equal to seedInterface(1). |
| 1.3.6.1.4.1.114.1.4.17.2.2.1.19 | ColumnswSysAtInterfaceZone13 | read-write | mandatory | Zone name in this entry's zone list. This object may only only be set for interfaces with swSysAtInterfaceType equal to seedInterface(1). |
| 1.3.6.1.4.1.114.1.4.17.2.2.1.20 | ColumnswSysAtInterfaceZone14 | read-write | mandatory | Zone name in this entry's zone list. This object may only only be set for interfaces with swSysAtInterfaceType equal to seedInterface(1). |
| 1.3.6.1.4.1.114.1.4.17.2.2.1.21 | ColumnswSysAtInterfaceZone15 | read-write | mandatory | Zone name in this entry's zone list. This object may only only be set for interfaces with swSysAtInterfaceType equal to seedInterface(1). |
| 1.3.6.1.4.1.114.1.4.17.2.2.1.22 | ColumnswSysAtInterfaceIfIndex | read-write | mandatory | The interface associated with this AppleTalk port. The interface identified by a particular value of this index is the same interface as identified by the same… |
| 1.3.6.1.4.1.114.1.4.17.2.2.1.23 | ColumnswSysAtInterfaceState | read-only | mandatory | The current state of the appletalk interface. |
| 1.3.6.1.4.1.114.1.4.17.2.2.1.24 | ColumnswSysAtInterfaceStatus | read-write | mandatory | The status column for this IP interface. This object can be set to: createAndGo(4) createAndWait(5) destroy(6) The following value may be read: active(1) notIn… |
| 1.3.6.1.4.1.114.1.4.18 | NodeswSysModuleCardGroup | |||
| 1.3.6.1.4.1.114.1.4.18.1 | ScalarswSysModuleCardCount | read-only | mandatory | The current count of module components present in the system. |
| 1.3.6.1.4.1.114.1.4.18.2 | TableswSysModuleCardInfoTable | not-accessible | mandatory | A list of module card information entries. A single entry exists in this list for each modular component in the system. |
| 1.3.6.1.4.1.114.1.4.18.2.1 | RowswSysModuleCardInfoEntry | not-accessible | mandatory | A module card info entry contains information about a particular modular component within the system. |
| 1.3.6.1.4.1.114.1.4.18.2.1.1 | ColumnswSysModuleCardInfoIndex | read-only | mandatory | The index of the modular component identified by this entry. |
| 1.3.6.1.4.1.114.1.4.18.2.1.2 | ColumnswSysModuleCardInfoFamily | read-only | mandatory | The family code for this module. |
| 1.3.6.1.4.1.114.1.4.18.2.1.3 | ColumnswSysModuleCardInfoGenericType | read-only | mandatory | The generic type code for this module. |
| 1.3.6.1.4.1.114.1.4.18.2.1.4 | ColumnswSysModuleCardInfoSpecificType | read-only | mandatory | The specific type code for this module. |
| 1.3.6.1.4.1.114.1.4.18.2.1.5 | ColumnswSysModuleCardInfoPartNumber | read-only | mandatory | The specific part number for this module. |
| 1.3.6.1.4.1.114.1.4.18.2.1.6 | ColumnswSysModuleCardInfoManufacturingDate | read-only | mandatory | The date that this module was manufactured in the format mm/dd/yyyy. |
| 1.3.6.1.4.1.114.1.4.18.2.1.7 | ColumnswSysModuleCardInfoModuleSerialNumber | read-only | mandatory | 3Com serial number. |
| 1.3.6.1.4.1.114.1.4.18.2.1.8 | ColumnswSysModuleCardInfoTLASerialNumber | read-only | mandatory | TOP level assembly serial number for boards with non-removable daughter cards. Null string for all other board types. |
| 1.3.6.1.4.1.114.1.4.18.2.1.9 | ColumnswSysModuleCardInfo3CNumber | read-only | mandatory | On a backplane or non-removable module this is the 3C number of the chassis. On a removable module this is the 3C number of the module. |
| 1.3.6.1.4.1.114.1.4.18.2.1.10 | ColumnswSysModuleCardInfoICTTestStatus | read-only | mandatory | 1 equals test passed, or greater than 1 identifies the test number failure (0 or FF indicates field yet not written). |
| 1.3.6.1.4.1.114.1.4.18.2.1.11 | ColumnswSysModuleCardInfoICTTestRevision | read-only | mandatory | Manufacturing ATE test revision number (XX.XX). |
| 1.3.6.1.4.1.114.1.4.18.2.1.12 | ColumnswSysModuleCardInfoSystemTestStatus | read-only | mandatory | 1 equals test passed, or greater than 1 identifies the test number failure (0 or FF indicates field yet not written). |
| 1.3.6.1.4.1.114.1.4.18.2.1.13 | ColumnswSysModuleCardInfoFunctionalTestStatus | read-only | mandatory | 1 equals test passed, or greater than 1 identifies the test number failure (0 or FF indicates field yet not written). |
| 1.3.6.1.4.1.114.1.4.18.2.1.14 | ColumnswSysModuleCardInfoFunctionalTestRevision | read-only | mandatory | Manufacturing functional test revision number (XX.XX). |
| 1.3.6.1.4.1.114.1.4.18.2.1.15 | ColumnswSysModuleCardInfoBoardRevision | read-only | mandatory | Board revision code. |
| 1.3.6.1.4.1.114.1.4.18.2.1.16 | ColumnswSysModuleCardInfoRuntimeHours | read-only | mandatory | A total count of the number of hours this module has been in operation. |
| 1.3.6.1.4.1.114.1.4.19 | NodeswSysDiagnosticsGroup | |||
| 1.3.6.1.4.1.114.1.4.19.1 | TableswSysDiagnosticsInfoTable | not-accessible | mandatory | A list of module card information entries. A single entry exists in this list for each modular component in the system. |
| 1.3.6.1.4.1.114.1.4.19.1.1 | RowswSysDiagnosticsInfoEntry | not-accessible | mandatory | A diagnostics info entry contains information about a particular diagnostics event on a modular component within the system. |
| 1.3.6.1.4.1.114.1.4.19.1.1.1 | ColumnswSysDiagnosticsInfoIndex | read-only | mandatory | The index of the diagnostics modular component identified by this entry. |
| 1.3.6.1.4.1.114.1.4.19.1.1.2 | ColumnswSysDiagnosticsInfoPOVDiagnosticsRevision | read-only | mandatory | The revision of the POV (power on verification) diagnostics software at the most recent failure. |
| 1.3.6.1.4.1.114.1.4.19.1.1.3 | ColumnswSysDiagnosticsInfoExtendedDiagnosticsRevision | read-only | mandatory | The revision of the extended diagnostics software at the most recent failure. |
| 1.3.6.1.4.1.114.1.4.19.1.1.4 | ColumnswSysDiagnosticsInfoDiagnosticFailureCode | read-only | mandatory | The code written by the diagnostics at the most recent failure. This identifies both the test number and failure code in the following format: -. If there is n… |
| 1.3.6.1.4.1.114.1.4.19.1.1.5 | ColumnswSysDiagnosticsInfoDiagnosticFailureDateTime | read-only | mandatory | The date and time of the most recent diagnostic failure for the module. |
| 1.3.6.1.4.1.114.1.4.19.1.1.6 | ColumnswSysDiagnosticsInfoDiagnosticFailureSlotNumber | read-only | mandatory | The slot number (network adapter cards only) of the most recent diagnostic failure for the module. |
| 1.3.6.1.4.1.114.1.4.19.1.1.7 | ColumnswSysDiagnosticsInfoDiagnosticFailureCounter | read-only | mandatory | The total number of diagnostic failures logged against this module. |
| 1.3.6.1.4.1.114.1.4.19.1.1.8 | ColumnswSysDiagnosticsInfoDiagnosticFieldDOACounter | read-only | mandatory | The total number of failures occurring at this module during the first 48 hours of operation. |
| 1.3.6.1.4.1.114.1.5 | NodecorebuilderSystemsMib | |||
| 1.3.6.1.4.1.114.1.6 | NodesuperstackSystemsMib | |||
| 1.3.6.1.4.1.114.1.10 | NodeswitchingSystemsFddiMib | |||
| 1.3.6.1.4.1.114.2 | NodeswitchingSystemsProducts | |||
| 1.3.6.1.4.1.114.2.1 | NodecorebuilderProductsII | |||
| 1.3.6.1.4.1.114.2.2 | NodesuperstackProducts |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| ATName | OCTET STRING (SIZE (0..32)) | ||
| ATNetworkNumber | OCTET STRING (SIZE (2)) | ||
| DdpNodeAddress | OCTET STRING (SIZE (3)) | ||
| IpxNetworkNumber | OCTET STRING (SIZE(4)) | ||
| MacAddress | OCTET STRING (SIZE (6)) | ||
| SwSysAddressType | INTEGER ( 1..2 ) | ||
| SwSysResourceBitMask | OCTET STRING (SIZE(4)) | ||
| SwSysResourceType | INTEGER ( 1..3 ) | ||
| SwSysStorageType | INTEGER (1..3) |