SYMMCOMMONNETWORK
114 objects
This is the Symmetricom Common MIB for Ethernet and IP configuration and status. It has three main nodes: 1. Ethernet configuration 2. IP configuration and status (including routing and firewall) 3. VLAN configuration
Imported Objects
| ENTITY-MIB | entPhysicalIndex |
| IF-MIB | ifIndex ifNumber |
| INET-ADDRESS-MIB | InetAddressIPv4 InetAddressIPv6 InetAddressIPv6z InetAddressPrefixLength InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION |
| SYMM-COMMON-SMI | EnableValue symmNetwork |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9070.1.2.5.4.1 | IdentitysymmCommonNetwork | This is the Symmetricom Common MIB for Ethernet and IP configuration and status. It has three main nodes: 1. Ethernet configuration 2. IP configuration and sta… | ||
| 1.3.6.1.4.1.9070.1.2.5.4.1.1 | NodenetworkEthStatus | |||
| 1.3.6.1.4.1.9070.1.2.5.4.1.1.1 | TablenetworkEthLinkTable | not-accessible | current | The Ethernet port link table of the TP5000 device. |
| 1.3.6.1.4.1.9070.1.2.5.4.1.1.1.1 | RownetworkEthLinkEntry | not-accessible | current | The ethernet link table. |
| 1.3.6.1.4.1.9070.1.2.5.4.1.1.1.1.1 | ColumnnetworkEthLinkIndex | not-accessible | current | The index of ethernet link table. |
| 1.3.6.1.4.1.9070.1.2.5.4.1.1.1.1.2 | ColumnnetworkEthLinkSpeed | read-only | current | The ethernet auto-negotiation speed. The defined speeds are 100M, 1000M, or none |
| 1.3.6.1.4.1.9070.1.2.5.4.1.1.1.1.3 | ColumnnetworkEthLinkStatus | read-only | MAX-ACCESS | Eth port link status, UP or DOWN |
| 1.3.6.1.4.1.9070.1.2.5.4.1.2 | NodenetworkEthConfig | |||
| 1.3.6.1.4.1.9070.1.2.5.4.1.2.1 | TablenetworkEthAutoNegTable | not-accessible | current | Ethernet port auto-negotiation table for common network. |
| 1.3.6.1.4.1.9070.1.2.5.4.1.2.1.1 | RownetworkEthAutoNegEntry | not-accessible | current | An entry of Ethernet port auto-negotiation table. Table index is ifIndex (port/interface index). |
| 1.3.6.1.4.1.9070.1.2.5.4.1.2.1.1.1 | ColumnnetworkEthAutoNegIndex | not-accessible | current | Local index of the Ethernet port auto-negotiation table. |
| 1.3.6.1.4.1.9070.1.2.5.4.1.2.1.1.2 | ColumnnetworkEthAutoNegState | read-write | current | Ethernet port auto-negotiation state can be Enable (1) or Disable (2). |
| 1.3.6.1.4.1.9070.1.2.5.4.1.2.1.1.3 | ColumnnetworkEthAutoNegSpeed | read-write | current | Advertised speed for Ethernet port auto-negotiation. Its value can be 100M, 1000M, or All. |
| 1.3.6.1.4.1.9070.1.2.5.4.1.3 | NodenetworkIpConfig | |||
| 1.3.6.1.4.1.9070.1.2.5.4.1.3.1 | TablenetworkIPv4ConfigTable | not-accessible | current | IPv4 interface configuration table for common network. It is used to read or write the IP address of the specified interface. |
| 1.3.6.1.4.1.9070.1.2.5.4.1.3.1.1 | RownetworkIPv4ConfigEntry | not-accessible | current | An entry of the IPv4 interface configuration table. Table index is ifIndex (port/interface index). |
| 1.3.6.1.4.1.9070.1.2.5.4.1.3.1.1.1 | ColumnnetworkIPv4ConfigIndex | not-accessible | current | IPv4 Local Index |
| 1.3.6.1.4.1.9070.1.2.5.4.1.3.1.1.2 | ColumnnetworkIPv4AddressOrigin | read-write | current | The origin of this IPv4 address can be one of the following: -manual(2) indicates that the address was manually configured to a specified address, e.g., by use… |
| 1.3.6.1.4.1.9070.1.2.5.4.1.3.1.1.3 | ColumnnetworkIPv4Address | read-write | current | The IP address to which this entry's addressing information pertains. Implementers need to be aware that if the size ipAddressAddr exceeds 116 octets, then OID… |
| 1.3.6.1.4.1.9070.1.2.5.4.1.3.1.1.4 | ColumnnetworkIPv4DefaultRouteAddr | read-write | current | The IP address of the default router represented by this row. The address type of this object is specified in symmIPAddressType. Implementers need to be aware … |
| 1.3.6.1.4.1.9070.1.2.5.4.1.3.1.1.5 | ColumnnetworkIPv4SubnetMask | read-write | current | The mask of an IPv4 interface. The address format is : xxx.xxx.xxx.xxx. |
| 1.3.6.1.4.1.9070.1.2.5.4.1.3.1.1.6 | ColumnnetworkIPv4PortState | read-write | current | The IP interface state can be Enable (1) or Disable (2). |
| 1.3.6.1.4.1.9070.1.2.5.4.1.3.2 | TablenetworkIPv4StaticRouteTable | not-accessible | current | The static route table is dynamic; its number of entries is not fixed. It is used to read or create a static route for the specified interface. |
| 1.3.6.1.4.1.9070.1.2.5.4.1.3.2.1 | RownetworkIPv4StaticRouteEntry | not-accessible | current | An entry of the IPv4 static route table. Table index is a double index: ifIndex and the local index networkIPv4StaticRouteIndex. |
| 1.3.6.1.4.1.9070.1.2.5.4.1.3.2.1.1 | ColumnnetworkIPv4StaticRouteIndex | read-only | current | Local index of the static route table. |
| 1.3.6.1.4.1.9070.1.2.5.4.1.3.2.1.2 | ColumnnetworkIPv4StaticRouteIfindex | read-create | current | IfIndex of the static route table. |
| 1.3.6.1.4.1.9070.1.2.5.4.1.3.2.1.3 | ColumnnetworkIPv4StaticDestAddr | read-create | current | The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in… |
| 1.3.6.1.4.1.9070.1.2.5.4.1.3.2.1.4 | ColumnnetworkIPv4StaticRouteMask | read-create | current | Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the ipRouteDest field. For those systems that do not s… |
| 1.3.6.1.4.1.9070.1.2.5.4.1.3.2.1.5 | ColumnnetworkIPv4StaticRouteNextHop | read-create | current | The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is… |
| 1.3.6.1.4.1.9070.1.2.5.4.1.3.2.1.6 | ColumnnetworkIPv4StaticRouteMetric1 | read-create | current | The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If … |
| 1.3.6.1.4.1.9070.1.2.5.4.1.3.2.1.7 | ColumnnetworkIPv4StaticRouteRowStatus | read-create | current | The row status of the IPv4 static route table is used to control row action. It has six defined action values: - `active(1)', which indicates that the conceptu… |
| 1.3.6.1.4.1.9070.1.2.5.4.1.3.3 | TablenetworkFirewallTable | not-accessible | current | This is the firewall configuration table for TP5000 external management port on the main shelf IMC module. |
| 1.3.6.1.4.1.9070.1.2.5.4.1.3.3.1 | RownetworkFirewallEntry | not-accessible | current | An entry of the firewall configuration table. Table index is ifIndex. |
| 1.3.6.1.4.1.9070.1.2.5.4.1.3.3.1.1 | ColumnnetworkFirewallIndex | not-accessible | current | Local index of the port Firewall table. |
| 1.3.6.1.4.1.9070.1.2.5.4.1.3.3.1.2 | ColumnnetworkFirewallICMP | read-write | current | Firewall control for ICMP. Value is Allow (1) or Block (2). |
| 1.3.6.1.4.1.9070.1.2.5.4.1.3.3.1.3 | ColumnnetworkFirewallTelnet | read-write | current | Firewall control for Telnet. Value is Allow (1) or Block (2). |
| 1.3.6.1.4.1.9070.1.2.5.4.1.3.3.1.4 | ColumnnetworkFirewallSSH | read-write | current | Firewall control for SSH. Value is Allow (1) or Block (2). |
| 1.3.6.1.4.1.9070.1.2.5.4.1.3.3.1.5 | ColumnnetworkFirewallSFTP | read-write | current | Firewall control for SFTP. Value is Allow (1) or Block (2). |
| 1.3.6.1.4.1.9070.1.2.5.4.1.3.3.1.6 | ColumnnetworkFirewallSNMP | read-write | current | Firewall control for SNMP. Value is Allow (1) or Block (2). |
| 1.3.6.1.4.1.9070.1.2.5.4.1.3.3.1.7 | ColumnnetworkFirewallFTP | read-write | current | Firewall control for FTP. Value is Allow (1) or Block (2). |
| 1.3.6.1.4.1.9070.1.2.5.4.1.3.3.1.8 | ColumnnetworkFirewallNTP | read-write | current | Firewall control for NTP. Value is Allow (1) or Block (2). |
| 1.3.6.1.4.1.9070.1.2.5.4.1.3.4 | TablenetworkIPv6ConfigTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.9070.1.2.5.4.1.3.4.1 | RownetworkIPv6ConfigEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.9070.1.2.5.4.1.3.4.1.1 | ColumnnetworkIPv6ConfigIndex | not-accessible | current | Description. |
| 1.3.6.1.4.1.9070.1.2.5.4.1.3.4.1.2 | ColumnnetworkIPv6AddressOrigin | read-write | current | The origin of this IPV6 address |
| 1.3.6.1.4.1.9070.1.2.5.4.1.3.4.1.3 | ColumnnetworkIPv6Address | read-write | current | The IPV6 address to which this entry's addressing information pertains |
| 1.3.6.1.4.1.9070.1.2.5.4.1.3.4.1.4 | ColumnnetworkIPv6Prefix | read-write | current | Prefix of IPv6 |
| 1.3.6.1.4.1.9070.1.2.5.4.1.3.4.1.5 | ColumnnetworkIPv6DefaultRouteAddr | read-write | current | The IPv6 default router address. Format 2x:2x:2x:2x:2x:2x:2x:2x |
| 1.3.6.1.4.1.9070.1.2.5.4.1.3.4.1.6 | ColumnnetworkIPv6PortState | read-write | current | The IP interface state can be Enable(1) or Disable(2) |
| 1.3.6.1.4.1.9070.1.2.5.4.1.3.5 | TablenetworkIPv6StaticRouteTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.9070.1.2.5.4.1.3.5.1 | RownetworkIPv6StaticRouteEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.9070.1.2.5.4.1.3.5.1.1 | ColumnnetworkIPv6StaticRouteIndex | read-only | current | Description. |
| 1.3.6.1.4.1.9070.1.2.5.4.1.3.5.1.2 | ColumnnetworkIPv6StaticRouteIfindex | read-create | current | Description. |
| 1.3.6.1.4.1.9070.1.2.5.4.1.3.5.1.3 | ColumnnetworkIPv6StaticRouteDestAddr | read-create | current | The destination IP address of this route |
| 1.3.6.1.4.1.9070.1.2.5.4.1.3.5.1.4 | ColumnnetworkIPv6StaticRoutePrefix | read-create | current | Description |
| 1.3.6.1.4.1.9070.1.2.5.4.1.3.5.1.5 | ColumnnetworkIPv6StaticRouteNextHop | read-create | current | The IPv6 address of the next hop of this route. |
| 1.3.6.1.4.1.9070.1.2.5.4.1.3.5.1.6 | ColumnnetworkIPv6StaticRouteMetric1 | read-create | current | The Primary routing metric for this route. The semantics of this metric are determined by the routing protocal specified in the route's ipRouteProto value. |
| 1.3.6.1.4.1.9070.1.2.5.4.1.3.5.1.7 | ColumnnetworkIPv6StaticRouteRowStatus | read-create | current | The row status of the IPv6 static route table is used to control row action It has six defined action values - active(1) - notInService(2) - notReady(3) - crea… |
| 1.3.6.1.4.1.9070.1.2.5.4.1.3.6 | TablenetworkIPVerTable | not-accessible | current | IP version of available interfaces |
| 1.3.6.1.4.1.9070.1.2.5.4.1.3.6.1 | RownetworkIPVerEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.9070.1.2.5.4.1.3.6.1.1 | ColumnnetworkIPVerIndex | not-accessible | current | Description. |
| 1.3.6.1.4.1.9070.1.2.5.4.1.3.6.1.2 | ColumnnetworkIPVersion | read-write | current | IP version of this interface |
| 1.3.6.1.4.1.9070.1.2.5.4.1.3.7 | TablenetworkIPv6AutoConfigTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.9070.1.2.5.4.1.3.7.1 | RownetworkIPv6AutoConfigEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.9070.1.2.5.4.1.3.7.1.1 | ColumnnetworkIPv6AutoConfigIndex | not-accessible | current | Description. |
| 1.3.6.1.4.1.9070.1.2.5.4.1.3.7.1.2 | ColumnnetworkIPv6AutoConfigMode | read-write | current | Description. |
| 1.3.6.1.4.1.9070.1.2.5.4.1.4 | NodenetworkVlanConfig | |||
| 1.3.6.1.4.1.9070.1.2.5.4.1.5 | NodenetworkIPStatus | |||
| 1.3.6.1.4.1.9070.1.2.5.4.1.5.1 | TablenetworkIPv4StatusTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.9070.1.2.5.4.1.5.1.1 | RownetworkIPv4StatusEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.9070.1.2.5.4.1.5.1.1.1 | ColumnnetworkIPv4StatusIndex | not-accessible | current | Description. |
| 1.3.6.1.4.1.9070.1.2.5.4.1.5.1.1.2 | ColumnnetworkIPv4Module | read-only | current | Description. |
| 1.3.6.1.4.1.9070.1.2.5.4.1.5.1.1.3 | ColumnnetworkIPv4VlanID | read-only | current | Description. |
| 1.3.6.1.4.1.9070.1.2.5.4.1.5.1.1.4 | ColumnnetworkIPv4Addr | read-only | current | Description. |
| 1.3.6.1.4.1.9070.1.2.5.4.1.5.1.1.5 | ColumnnetworkIPv4Netmask | read-only | current | Description. |
| 1.3.6.1.4.1.9070.1.2.5.4.1.5.1.1.6 | ColumnnetworkIPv4RouteAddr | read-only | current | Description. |
| 1.3.6.1.4.1.9070.1.2.5.4.1.5.1.1.7 | ColumnnetworkIPv4Mode | read-only | current | The origin of this IPv4 address can be one of the following: -manual(2) indicates that the address was manually configured to a specified address, e.g., by use… |
| 1.3.6.1.4.1.9070.1.2.5.4.1.5.2 | TablenetworkIPv6StatusTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.9070.1.2.5.4.1.5.2.1 | RownetworkIPv6StatusEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.9070.1.2.5.4.1.5.2.1.1 | ColumnnetworkIPv6StatusIndex | not-accessible | current | Description. |
| 1.3.6.1.4.1.9070.1.2.5.4.1.5.2.1.2 | ColumnnetworkIPv6Module | read-only | current | Description. |
| 1.3.6.1.4.1.9070.1.2.5.4.1.5.2.1.3 | ColumnnetworkIPv6VlanID | read-only | current | Description. |
| 1.3.6.1.4.1.9070.1.2.5.4.1.5.2.1.4 | ColumnnetworkIPv6Addr | read-only | current | Description. |
| 1.3.6.1.4.1.9070.1.2.5.4.1.5.2.1.5 | ColumnnetworkIPv6PrefixLength | read-only | current | Description. |
| 1.3.6.1.4.1.9070.1.2.5.4.1.5.2.1.6 | ColumnnetworkIPv6AddrScope | read-only | current | Description. |
| 1.3.6.1.4.1.9070.1.2.5.4.1.5.2.1.7 | ColumnnetworkIPv6Mode | read-only | current | Description. |
| 1.3.6.1.4.1.9070.1.2.5.4.1.6 | IdentitynetworkConformance | current | This subtree contains conformance statements for the SYMMETRICOM-LED-MIB module. | |
| 1.3.6.1.4.1.9070.1.2.5.4.1.6.1 | NodenetworkCompliances | |||
| 1.3.6.1.4.1.9070.1.2.5.4.1.6.1.1 | CompliancenetworkBasicCompliance | current | The compliance statement for SNMP entities which have common network of symmetricom. | |
| 1.3.6.1.4.1.9070.1.2.5.4.1.6.2 | NodenetworkUocGroups | |||
| 1.3.6.1.4.1.9070.1.2.5.4.1.6.2.1 | GroupnetworkEthAutoNetGroup | current | A collection of objects providing information applicable to ethernet auto-negotiation configuration group. | |
| 1.3.6.1.4.1.9070.1.2.5.4.1.6.2.2 | GroupnetworkIPv4ConfigGroup | current | A collection of objects providing information applicable to IP configuration group. | |
| 1.3.6.1.4.1.9070.1.2.5.4.1.6.2.3 | GroupnetworkFirewallGroup | current | A collection of objects providing information applicable to firewall group. | |
| 1.3.6.1.4.1.9070.1.2.5.4.1.6.2.4 | GroupnetworkIPv4StaticRouteGroup | current | Description. | |
| 1.3.6.1.4.1.9070.1.2.5.4.1.6.2.5 | GroupnetworkEthStatusGroup | current | Description. | |
| 1.3.6.1.4.1.9070.1.2.5.4.1.6.2.6 | GroupnetworkIPv6ConfigGroup | current | Description. | |
| 1.3.6.1.4.1.9070.1.2.5.4.1.6.2.7 | GroupnetworkIPv6StaticRouteGroup | current | Description. | |
| 1.3.6.1.4.1.9070.1.2.5.4.1.6.2.8 | GroupnetworkIPVersionGroup | current | Description. | |
| 1.3.6.1.4.1.9070.1.2.5.4.1.6.2.9 | GroupnetworkIPv6AutoConfigGroup | current | Description. | |
| 1.3.6.1.4.1.9070.1.2.5.4.1.6.2.10 | GroupnetworkIPv4StatusGroup | current | Description. | |
| 1.3.6.1.4.1.9070.1.2.5.4.1.6.2.11 | GroupnetworkIPv6StatusGroup | current | Description. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AutoSpeedValue | INTEGER { eth100m(1), eth1000m(2), all(3), unknown(4) } | ||
| DateAndTime | OCTET STRING (SIZE (8 | 11)) | current | A date-time specification. field octets contents range 1 1-2 year* 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction f… |
| ETHAUTOSPEEDTYPE | INTEGER { eth100m(1), eth1000m(2), all(3), unknown(4) } | ||
| ETHLINKSTATUS | INTEGER { ethUp(1), ethDown(2) } | ||
| FirewallOnOff | INTEGER { allow(1), block(2) } | ||
| IpAddressOriginTC | INTEGER { other(1), manual(2), dhcp(4), linklayer(5), random(6) } | ||
| IPPortStateValue | INTEGER { enable(1), disable(2), restart(3) } | ||
| IPV6SCOPE | INTEGER { interface-local(1), link-local(2), site-local(5), global(14) } | ||
| TAntHeight | OCTET STRING (SIZE (4)) | current | antenna height specification. field octets contents range 1 1 +/- '+' / '-' 2 2-3 meter 0..10000 3 4 meter fraction 0..99 +/- hh.hh |
| TLatAndLon | OCTET STRING (SIZE (5)) | current | antenna latitude and longitude specification. field octets contents range 1 1 +/-180 deg '+' / '-' 2 2 degree 0..180 3 3 minute 0..59 4 4 second 0..59 5 5 second fraction 0..99 +/- dd:mm:ss.ss |
| TLocalTimeOffset | OCTET STRING (SIZE (3)) | current | A local time offset specification. field octets contents range 1 1 direction from UTC '+' / '-' 2 2 hours from UTC* 0..13 3 3 minutes from UTC 0..59 * Notes: - the value of year is in network-byte order - The hours rang… |
| TPMODULEID | INTEGER { imc(1), ioc1(2), ioc2(3), exp0(6), exp1(7), exp2(8), exp3(9), exp4(10), exp5(11), exp6(12), exp7(13), exp8(14), exp9(15) } | ||
| TSsm | INTEGER (0..255) | current | The ssm hex code |