SYMMNTP
33 objects
This is the Symmetricom NTP MIB. It has two main nodes: NTP status and NTP configuration.
Imported Objects
| ENTITY-MIB | entPhysicalIndex |
| IF-MIB | ifIndex ifNumber |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION |
| SYMM-COMMON-SMI | EnableValue symmPacketService |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9070.1.2.5.1.2 | IdentitysymmNTP | This is the Symmetricom NTP MIB. It has two main nodes: NTP status and NTP configuration. | ||
| 1.3.6.1.4.1.9070.1.2.5.1.2.1 | NodentpStatus | |||
| 1.3.6.1.4.1.9070.1.2.5.1.2.1.1 | TablentpCommonStatusTable | not-accessible | current | The NTP status table. It provides status for the NTP server operation. There are 7 status parameters. |
| 1.3.6.1.4.1.9070.1.2.5.1.2.1.1.1 | RowntpCommonStatusEntry | not-accessible | current | An entry of the NTP status table. Table index is ifIndex (port and interface index). |
| 1.3.6.1.4.1.9070.1.2.5.1.2.1.1.1.1 | ColumnntpStatusIndex | not-accessible | current | Local index of the NTP common status table. |
| 1.3.6.1.4.1.9070.1.2.5.1.2.1.1.1.2 | ColumnntpStatusEnable | read-only | current | The NTP enable status for the specified NTP port. It can be Enable (1) or Disable (2). When NTP is disabled at a port, it does not transmit or respond to NTP p… |
| 1.3.6.1.4.1.9070.1.2.5.1.2.1.1.1.3 | ColumnntpStatusMode | read-only | current | The NTP operational mode. It can act as server or client. Currently only the server mode is supported. |
| 1.3.6.1.4.1.9070.1.2.5.1.2.1.1.1.4 | ColumnntpStatusLeapStatus | read-only | current | The NTP leap second status. Possible values are : No warning, Leap insertion, Leap deletion, Not in sync. |
| 1.3.6.1.4.1.9070.1.2.5.1.2.1.1.1.5 | ColumnntpStatusStratumLevel | read-only | current | The stratum level of the reference for the NTP clock at the specified port. Its range is 1-4. Only stratum level 1(PRC/PRS) is supported. |
| 1.3.6.1.4.1.9070.1.2.5.1.2.1.1.1.6 | ColumnntpStatusRootDispersion | read-only | current | Root dispersion. Hardcoded to be 0. |
| 1.3.6.1.4.1.9070.1.2.5.1.2.1.1.1.7 | ColumnntpStatusPacketLoad | read-only | current | NTP packet response load. Its range is 1-100 in unit of %. |
| 1.3.6.1.4.1.9070.1.2.5.1.2.1.1.1.8 | ColumnntpStatusVersion | read-only | current | NTP protocol version. Only version 4 is supported. |
| 1.3.6.1.4.1.9070.1.2.5.1.2.2 | NodentpConfig | |||
| 1.3.6.1.4.1.9070.1.2.5.1.2.2.1 | TablentpCommonConfigTable | not-accessible | current | The NTP server configuration table. |
| 1.3.6.1.4.1.9070.1.2.5.1.2.2.1.1 | RowntpCommonConfigEntry | not-accessible | current | An entry of the NTP server configuration table. Table index is ifIndex (port and interface index). |
| 1.3.6.1.4.1.9070.1.2.5.1.2.2.1.1.1 | ColumnntpCommonIndex | not-accessible | current | Local index of the NTP common parameter configuration table. |
| 1.3.6.1.4.1.9070.1.2.5.1.2.2.1.1.2 | ColumnntpCommonState | read-write | current | The NTP service enable state for the specified port. It can be Enable (1) or Disable (2). Default value is Enable. When NTP is disabled at a port, it does not … |
| 1.3.6.1.4.1.9070.1.2.5.1.2.2.1.1.3 | ColumnntpCommonTTL | read-write | current | IP header time-to-live (TTL) field for the NTP packets. Range is 1-255. Default value is 64. |
| 1.3.6.1.4.1.9070.1.2.5.1.2.2.1.1.4 | ColumnntpCommonDSCP | read-write | current | Differentiated service code point (DSCP) state for the specified NTP port. It can be either Enable (1) or Disable (2). Default value is Disable. If DSCP state … |
| 1.3.6.1.4.1.9070.1.2.5.1.2.2.1.1.5 | ColumnntpCommonDSCPValue | read-write | current | DSCP value for PTP packets leaving this port. Range is 0-63, and default value is 0. |
| 1.3.6.1.4.1.9070.1.2.5.1.2.2.1.1.6 | ColumnntpCommonVlanId | read-write | current | The VLAN ID associated with the NTP service at this port. Each port only supports one NTP VLAN. |
| 1.3.6.1.4.1.9070.1.2.5.1.2.2.1.1.7 | ColumnntpCommonServiceLoadAlarmThreshold | read-write | current | It shows percentage (%) of NTP service load alarm threshold |
| 1.3.6.1.4.1.9070.1.2.5.1.2.3 | IdentityntpConformance | current | This subtree contains conformance statements for the SYMMETRICOM-LED-MIB module. | |
| 1.3.6.1.4.1.9070.1.2.5.1.2.3.1 | NodentpCompliances | |||
| 1.3.6.1.4.1.9070.1.2.5.1.2.3.1.1 | CompliancentpBasicCompliance | current | The compliance statement for SNMP entities which have NTP packet service. | |
| 1.3.6.1.4.1.9070.1.2.5.1.2.3.2 | NodentpUocGroups | |||
| 1.3.6.1.4.1.9070.1.2.5.1.2.3.2.1 | GroupntpStatusGroup | current | A collection of objects providing information applicable to NTP status group. | |
| 1.3.6.1.4.1.9070.1.2.5.1.2.3.2.2 | GroupntpConfigGroup | current | A collection of objects providing information applicable to NTP configuration group. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DateAndTime | OCTET STRING (SIZE (8 | 11)) | current | A date-time specification. field octets contents range 1 1-2 year* 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction f… |
| TAntHeight | OCTET STRING (SIZE (4)) | current | antenna height specification. field octets contents range 1 1 +/- '+' / '-' 2 2-3 meter 0..10000 3 4 meter fraction 0..99 +/- hh.hh |
| TLatAndLon | OCTET STRING (SIZE (5)) | current | antenna latitude and longitude specification. field octets contents range 1 1 +/-180 deg '+' / '-' 2 2 degree 0..180 3 3 minute 0..59 4 4 second 0..59 5 5 second fraction 0..99 +/- dd:mm:ss.ss |
| TLocalTimeOffset | OCTET STRING (SIZE (3)) | current | A local time offset specification. field octets contents range 1 1 direction from UTC '+' / '-' 2 2 hours from UTC* 0..13 3 3 minutes from UTC 0..59 * Notes: - the value of year is in network-byte order - The hours rang… |
| TSsm | INTEGER (0..255) | current | The ssm hex code |