SnetSwitch-MIB
113 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.169 | Nodetandem | |||
| 1.3.6.1.4.1.169.8 | NodeserverNet | |||
| 1.3.6.1.4.1.169.8.3 | NodeserverNetSwitch | |||
| 1.3.6.1.4.1.169.8.3.1 | NodesnetSwitchNetworkData | |||
| 1.3.6.1.4.1.169.8.3.1.1 | ScalarsnetSwitchTotal | read-only | mandatory | The number of ServerNet Switches (regardless of state) known in the network. X and Y fabric switches are considered separate switches in this Total count. |
| 1.3.6.1.4.1.169.8.3.1.2 | ScalarsnetSwitchRefreshTime | read-write | mandatory | Specifies the minimum time in seconds between refreshes of Mib data. Mib data is refreshed each time it is requested unless the refresh interval time has not y… |
| 1.3.6.1.4.1.169.8.3.1.3 | ScalarsnetSwitchMibRevMajor | read-only | mandatory | The Major Revision level of the Switch MIB. A change in the major revision level represents a major change in the architecture of the MIB. A change in the majo… |
| 1.3.6.1.4.1.169.8.3.1.4 | ScalarsnetSwitchMibRevMinor | read-only | mandatory | The Minor Revision level of the Switch MIB. A change in the minor revision level may represent some minor additional support, no changes to any pre-existing in… |
| 1.3.6.1.4.1.169.8.3.1.5 | TablesnetSwitchIDTable | not-accessible | mandatory | Table containing the Switch IDs of all switches known in the network. |
| 1.3.6.1.4.1.169.8.3.1.5.1 | RowsnetSwitchIDEntry | not-accessible | mandatory | Entry in switch table |
| 1.3.6.1.4.1.169.8.3.1.5.1.1 | ColumnsnetSwitchIDIndex | read-only | mandatory | Index in Switch ServerNet ID Entry Table. |
| 1.3.6.1.4.1.169.8.3.1.5.1.2 | ColumnsnetSwitchID | read-only | mandatory | Switch ID. The switch id is displayed as a hexidecimal value. |
| 1.3.6.1.4.1.169.8.3.1.5.1.3 | ColumnsnetSwitchType | read-only | mandatory | Identifies the Switch type. Switch can be either a 6-port or 12-port switch. |
| 1.3.6.1.4.1.169.8.3.1.6 | TablesnetSwitchSANMapTable | not-accessible | mandatory | Table containing the System Area Network map information. This table has an entry for each switch in the network as indexed by the snetSwitchIDIndex from the s… |
| 1.3.6.1.4.1.169.8.3.1.6.1 | RowsnetSwitchSANMapEntry | not-accessible | mandatory | Entry in SAN Map table. |
| 1.3.6.1.4.1.169.8.3.1.6.1.1 | ColumnsnetSwitchSANMapPortIndex | read-only | mandatory | Identifies the switch port number. |
| 1.3.6.1.4.1.169.8.3.1.6.1.2 | ColumnsnetSwitchSANNodeType | read-only | mandatory | Identifies the type of the Node connected to the switch. Valid values are Unknown(1), End Node(2), Auto-Configured IO(3), Manual-Configured IO(4), Switch(5). |
| 1.3.6.1.4.1.169.8.3.1.6.1.3 | ColumnsnetSwitchSANNodeState | read-only | mandatory | Identifies the current state of the Node connected to the switch. Valid values are Unconfigured(1), Configured(2). |
| 1.3.6.1.4.1.169.8.3.1.6.1.4 | ColumnsnetSwitchSANNodeDomain | read-only | mandatory | Identifies the domain the node belongs to. If the port is not configured, Domain will be blank. |
| 1.3.6.1.4.1.169.8.3.1.6.1.5 | ColumnsnetSwitchSANNodeID | read-only | mandatory | For end nodes, this is the Node ID. For switches, this is a Switch ID. If port is not configured, NodeID will be 0. |
| 1.3.6.1.4.1.169.8.3.1.6.1.6 | ColumnsnetSwitchSANNodeName | read-only | mandatory | The ServerNet node name. If the port is not configured, NodeName will be blank. |
| 1.3.6.1.4.1.169.8.3.1.6.1.7 | ColumnsnetSwitchSANNodeFabric | read-only | mandatory | Identifies the X or Y Fabric this node connects to. X Fabric(1), Y Fabric(2), Both Fabrics(3), Not Defined(4). |
| 1.3.6.1.4.1.169.8.3.1.6.1.8 | ColumnsnetSwitchSANNodeManufacturingID | read-only | mandatory | The Manufacturing ID of connected switch or node. |
| 1.3.6.1.4.1.169.8.3.1.6.1.9 | ColumnsnetSwitchSANNodePartNumber | read-only | mandatory | Part Number of connected switch or node. |
| 1.3.6.1.4.1.169.8.3.1.6.1.10 | ColumnsnetSwitchSANNodeSerialNumber | read-only | mandatory | Serial Number of connected switch or node. |
| 1.3.6.1.4.1.169.8.3.1.7 | NodesnetSwitchTrapEnables | |||
| 1.3.6.1.4.1.169.8.3.1.7.1 | ScalarsnetSwitchLinkAliveTrapEnable | read-write | mandatory | Enables Link Alive Trap generation. Asynchronous events can be generated by the switch whenever a change in link alive is detected. Valid values are off(0), on… |
| 1.3.6.1.4.1.169.8.3.1.7.2 | ScalarsnetSwitchNeighborChgTrapEnable | read-write | mandatory | Enables Neighbor Change Trap generation. Asynchronous events can be generated by the switch whenever a change in neighbor id is detected. Valid values are off(… |
| 1.3.6.1.4.1.169.8.3.1.7.3 | ScalarsnetSwitchThresholdErrorTrapEnable | read-write | mandatory | Enables Link/Packet Error Trap generation. Asynchronous events can be generated by the switch whenever a link, packet, or IBC errors have exceeded a pre-define… |
| 1.3.6.1.4.1.169.8.3.1.7.4 | ScalarsnetSwitchAccessViolationTrapEnable | read-write | mandatory | Enables AccessViolation Trap generation. Asynchronous events can be generated by the switch whenever a packet is received from an unknown ServerNet ID. Valid v… |
| 1.3.6.1.4.1.169.8.3.1.7.5 | ScalarsnetSwitchTakeoverTrapEnable | read-write | mandatory | Enables notification of switch takeover Trap generation. Asynchronous events can be generated by the switch whenever the switch ownership changes. Valid values… |
| 1.3.6.1.4.1.169.8.3.1.7.6 | ScalarsnetSwitchSWFWTrapEnable | read-write | mandatory | Enables generation of firmware upgrade traps. Asynchronous events can be generated by the administrative node whenever a firmware upgrade of the switch occurs.… |
| 1.3.6.1.4.1.169.8.3.1.8 | ScalarsnetSwitchPrimarySANManSNetID | read-only | mandatory | Identifies the ServerNet ID of the current primary administrative node in the ServerNet SAN. |
| 1.3.6.1.4.1.169.8.3.1.9 | ScalarsnetSwitchBackupSANManSNetID | read-only | mandatory | Identifies the ServerNet ID of the current backup administrative node in the ServerNet SAN. |
| 1.3.6.1.4.1.169.8.3.1.10 | ScalarsnetSwitchFailoverEventType | read-only | mandatory | Indicates the most recent failover event type. Valid values include NoFailoversDetected(1), BackupNotReachable(2), BackupTookOver(3), PrimaryNotReachable(4), P… |
| 1.3.6.1.4.1.169.8.3.1.11 | ScalarsnetSwitchPrimarySANManName | read-only | mandatory | Name of the current primary administrative node in the ServerNet SAN. |
| 1.3.6.1.4.1.169.8.3.1.12 | ScalarsnetSwitchBackupSANManName | read-only | mandatory | Name of the current backup administrative node in the ServerNet SAN. |
| 1.3.6.1.4.1.169.8.3.2 | NodesnetSwitchInfo | |||
| 1.3.6.1.4.1.169.8.3.2.1 | NodesnetSwitchConfigData | |||
| 1.3.6.1.4.1.169.8.3.2.1.1 | TablesnetSwitchConfigTable | not-accessible | mandatory | ServerNet Switch Configuration data. |
| 1.3.6.1.4.1.169.8.3.2.1.1.1 | RowsnetSwitchConfigEntry | not-accessible | mandatory | An entry containing ServerNet Switch configuration data. |
| 1.3.6.1.4.1.169.8.3.2.1.1.1.1 | ColumnsnetSwitchSnetID | read-only | mandatory | Switch Identifier. The switch id is displayed as a hexidecimal value. |
| 1.3.6.1.4.1.169.8.3.2.1.1.1.2 | ColumnsnetSwitchManufacturingID | read-only | mandatory | The Manufacturing ID |
| 1.3.6.1.4.1.169.8.3.2.1.1.1.3 | ColumnsnetSwitchPartNumber | read-only | mandatory | Switch Part Number |
| 1.3.6.1.4.1.169.8.3.2.1.1.1.4 | ColumnsnetSwitchSerialNumber | read-only | mandatory | Switch Serial Number |
| 1.3.6.1.4.1.169.8.3.2.1.1.1.5 | ColumnsnetSwitchHWMajorRev | read-only | mandatory | Switch Hardware Major Revision |
| 1.3.6.1.4.1.169.8.3.2.1.1.1.6 | ColumnsnetSwitchHWMinorRev | read-only | mandatory | Switch Hardware Minor Revision |
| 1.3.6.1.4.1.169.8.3.2.1.1.1.7 | ColumnsnetSwitchFWRelease | read-only | mandatory | Switch Firmware Release |
| 1.3.6.1.4.1.169.8.3.2.1.1.1.8 | ColumnsnetSwitchFWMajorRev | read-only | mandatory | Switch Firmware Major Revision |
| 1.3.6.1.4.1.169.8.3.2.1.1.1.9 | ColumnsnetSwitchFWMinorRev | read-only | mandatory | Switch Firmware Minor Revision |
| 1.3.6.1.4.1.169.8.3.2.1.1.1.10 | ColumnsnetSwitchSANManSNetID | read-only | mandatory | ServerNet ID of the primary administrative node. |
| 1.3.6.1.4.1.169.8.3.2.1.1.1.11 | ColumnsnetSwitchState | read-only | mandatory | Identifies the current state of the Switch. Unconfigured(1), Configured(2). |
| 1.3.6.1.4.1.169.8.3.2.1.1.1.12 | ColumnsnetSwitchDomain | read-only | mandatory | The domain the switch belongs to. If no domain is defined, the default is blank. |
| 1.3.6.1.4.1.169.8.3.2.1.1.1.13 | ColumnsnetSwitchName | read-only | mandatory | The switch name. If no name is defined, this field will be blank. |
| 1.3.6.1.4.1.169.8.3.2.1.1.1.14 | ColumnsnetSwitchFabric | read-only | mandatory | Identifies the X or Y Fabric this node connects to. X Fabric(1), Y Fabric(2), Both Fabrics(3), Not Defined(4). |
| 1.3.6.1.4.1.169.8.3.2.2 | NodesnetSwitchPortData | |||
| 1.3.6.1.4.1.169.8.3.2.2.1 | TablesnetSwitchPortErrorStatusTable | not-accessible | mandatory | Table containing error and status information for each of the configured ports. |
| 1.3.6.1.4.1.169.8.3.2.2.1.1 | RowsnetSwitchPortErrorStatusEntry | not-accessible | mandatory | A table of per-port error and status data |
| 1.3.6.1.4.1.169.8.3.2.2.1.1.1 | ColumnsnetSwitchPortErrorStatusIndex | read-only | mandatory | Identifies the switch port number. |
| 1.3.6.1.4.1.169.8.3.2.2.1.1.2 | ColumnsnetSwitchLinkErrorCounter | read-only | mandatory | Number of link errors which have occurred on the selected port. |
| 1.3.6.1.4.1.169.8.3.2.2.1.1.3 | ColumnsnetSwitchPacketErrorCounter | read-only | mandatory | Number of packet errors which have occurred on the selected port. |
| 1.3.6.1.4.1.169.8.3.2.2.1.1.4 | ColumnsnetSwitchIBCErrorCounter | read-only | mandatory | Number of IBC errors which have occurred on the selected port. |
| 1.3.6.1.4.1.169.8.3.2.2.1.1.5 | ColumnsnetSwitchPortStatus | read-only | mandatory | Current state of the specified port. Valid values are Unavailable(1), Uninstalled(2), NoLinkAlive(3), Alive(4). |
| 1.3.6.1.4.1.169.8.3.2.2.1.1.6 | ColumnsnetSwitchDaughterCardType | read-only | mandatory | Daughter card type installed on the specified port. Valid values are Unknown(1), (port can't be reached) Other (2), (daughter board installed but type not defi… |
| 1.3.6.1.4.1.169.8.3.2.2.1.1.7 | ColumnsnetSwitchDaughterCardStatus | read-only | mandatory | Current status of the specified daughter card Valid values are Not Provided(1), (some daughter cards do not provide a status) Cable Connected (2), Cable Not Te… |
| 1.3.6.1.4.1.169.8.3.2.3 | NodesnetSwitchRoutingData | |||
| 1.3.6.1.4.1.169.8.3.2.3.1 | TablesnetSwitchRoutingTable | not-accessible | mandatory | The routing table is 1024 entries |
| 1.3.6.1.4.1.169.8.3.2.3.1.1 | RowsnetSwitchRoutingTableEntry | not-accessible | mandatory | The routing table entry has an index and a port address. |
| 1.3.6.1.4.1.169.8.3.2.3.1.1.1 | ColumnsnetSwitchRoutingTableIndex | read-only | mandatory | ServerNet Switch Routing Table Index. An index into the routing table. |
| 1.3.6.1.4.1.169.8.3.2.3.1.1.2 | ColumnsnetSwitchDest | read-only | mandatory | A port address. |
| 1.3.6.1.4.1.169.8.3.2.3.2 | TablesnetSwitchRoutingLeafTable | not-accessible | mandatory | The routing table is 64 entries |
| 1.3.6.1.4.1.169.8.3.2.3.2.1 | RowsnetSwitchRoutingLeafTableEntry | not-accessible | mandatory | The routing table entry has an index and a port address. |
| 1.3.6.1.4.1.169.8.3.2.3.2.1.1 | ColumnsnetSwitchRoutingLeafTableIndex | read-only | mandatory | ServerNet Switch Routing Leaf Table Index. An index into the routing table. |
| 1.3.6.1.4.1.169.8.3.2.3.2.1.2 | ColumnsnetSwitchLeafDest | read-only | mandatory | A port address. |
| 1.3.6.1.4.1.169.8.3.2.4 | NodesnetSwitchPerformanceData | |||
| 1.3.6.1.4.1.169.8.3.2.4.1 | TablesnetSwitchPerfTable | not-accessible | mandatory | The switch performance data. |
| 1.3.6.1.4.1.169.8.3.2.4.1.1 | RowsnetSwitchPerfTableEntry | not-accessible | mandatory | An entry in the performance table. Performance data is maintained per switch. |
| 1.3.6.1.4.1.169.8.3.2.4.1.1.1 | ColumnsnetSwitchPerfType1 | read-write | mandatory | Selects the type of performance count to be run in counter 1. |
| 1.3.6.1.4.1.169.8.3.2.4.1.1.2 | ColumnsnetSwitchPerfType2 | read-write | mandatory | Selects the type of performance count to be run in counter 2. |
| 1.3.6.1.4.1.169.8.3.2.4.1.1.3 | ColumnsnetSwitchPerfInPort1 | read-write | mandatory | Input port to be used for performance counts for Performance Counter 1. |
| 1.3.6.1.4.1.169.8.3.2.4.1.1.4 | ColumnsnetSwitchPerfOutPort1 | read-write | mandatory | Output port to be used for performance counts for Performance Counter 1. |
| 1.3.6.1.4.1.169.8.3.2.4.1.1.5 | ColumnsnetSwitchPerfInPort2 | read-write | mandatory | Input port to be used for performance counts for Performance Counter 2. |
| 1.3.6.1.4.1.169.8.3.2.4.1.1.6 | ColumnsnetSwitchPerfOutPort2 | read-write | mandatory | Output port to be used for performance counts for Performance Counter 2. |
| 1.3.6.1.4.1.169.8.3.2.4.1.1.7 | ColumnsnetSwitchPerfTimerSelect | read-only | mandatory | Specifies the duration the performance count should run. 1= 16 nanoseconds per count, maximum 68.72 second timer 2= 256 nanoseconds per count, maximum 18.33 mi… |
| 1.3.6.1.4.1.169.8.3.2.4.1.1.8 | ColumnsnetSwitchPerfTimerInterval | read-write | mandatory | This is the amount of time the counter will run in milliseconds. The default is 0 and must be changed before a performance count will run. The maximum value is… |
| 1.3.6.1.4.1.169.8.3.2.4.1.1.9 | ColumnsnetSwitchPerfStart | read-write | mandatory | Setting this variable to 1 causes the request to start the performance count to be sent. The Types, Inports, Outports, and TimerInterval should all be set prio… |
| 1.3.6.1.4.1.169.8.3.2.4.1.1.10 | ColumnsnetSwitchPerfStatus | read-only | mandatory | GETting this variable causes a request to be made to the switch to retrieve the latest values for the Performance count status (snetSwitchPerfStatus), Performa… |
| 1.3.6.1.4.1.169.8.3.2.4.1.1.11 | ColumnsnetSwitchPerfElapsedTime | read-only | mandatory | The amount of time elapsed on the current performance count in milliseconds. If this value is zero, the performance counters have completed. |
| 1.3.6.1.4.1.169.8.3.2.4.1.1.12 | ColumnsnetSwitchPerfCounter1 | read-only | mandatory | The result of the last performance count for counter 1. To check the validity and get the latest Counter1 value from the switch, first Get the snetSwitchPerfSt… |
| 1.3.6.1.4.1.169.8.3.2.4.1.1.13 | ColumnsnetSwitchPerfCounter2 | read-only | mandatory | The result of the last performance count for counter 2. To check the validity and get the latest Counter2 value from the switch, first Get the snetSwitchPerfSt… |
| 1.3.6.1.4.1.169.8.3.2.5 | NodesnetSwitchErrorStatusData | |||
| 1.3.6.1.4.1.169.8.3.2.5.1 | TablesnetSwitchErrorStatusTable | not-accessible | mandatory | Table of switch error and status data. |
| 1.3.6.1.4.1.169.8.3.2.5.1.1 | RowsnetSwitchErrorStatusEntry | not-accessible | mandatory | An entry containing status and error data for each switch. |
| 1.3.6.1.4.1.169.8.3.2.5.1.1.1 | ColumnsnetSwitchLinkErrorThreshold | read-write | mandatory | Number of link errors which occur before an asynchronous event notification is generated by the switch. |
| 1.3.6.1.4.1.169.8.3.2.5.1.1.2 | ColumnsnetSwitchPacketErrorThreshold | read-write | mandatory | Number of packet errors which occur before an asynchronous event notification is generated by the switch. |
| 1.3.6.1.4.1.169.8.3.2.5.1.1.3 | ColumnsnetSwitchIBCErrorThreshold | read-write | mandatory | Number of packet errors which occur before an asynchronous event notification is generated by the switch. |
| 1.3.6.1.4.1.169.8.3.2.5.1.1.4 | ColumnsnetSwitchNeighborID | read-only | mandatory | This field contains the latest value of the Neighbor ID which has changed. Whenever a change in a neighbor ID is detected by a switch, the switch generates an … |
| 1.3.6.1.4.1.169.8.3.2.5.1.1.5 | ColumnsnetSwitchAccessViolationID | read-only | mandatory | This field contains the latest value for the invalid ID which was detected by the switch. Whenever an invalid id is detected by a switch, the switch generates … |
| 1.3.6.1.4.1.169.8.3.2.5.1.1.6 | ColumnsnetSwitchFWStatus | read-only | mandatory | The Firmware Status for the Switch Firmware Status OK(1), Hardware Error Detected(2), Unknown Firmware Error Detected(3), Bad Program CheckSum(4), Current Conf… |
| 1.3.6.1.4.1.169.8.3.2.5.1.1.7 | ColumnsnetSwitchHWStatus | read-only | mandatory | The Hardware Status for the Switch Hardware Status OK(1), SRAM Memory test failed(2), Flash sector test failed(3), Bad SEEPROM checksum(4), SBUSY error(5), FLA… |
| 1.3.6.1.4.1.169.8.3.2.5.1.1.8 | ColumnsnetSwitchStatus | read-only | mandatory | The Overall Status for the Switch. This is determined by a combination of port status values and configuration values. If a port is configured, it should detec… |
| 1.3.6.1.4.1.169.8.3.2.5.1.1.9 | ColumnsnetSwitchFanStatus | read-only | mandatory | The status of the switch fans. Other(1): Unknown or not reported. This is the status if the switch cannot be reached. OK(2): OK is reported if both fans are wo… |
| 1.3.6.1.4.1.169.8.100 | NodesnetSwitchLinkAliveChange | The switch has detected a change in the status of a port. Possible Cause / Solution: If Port is nonfunctional, Disconnected, loose or defective SAN Cable: Reat… | ||
| 1.3.6.1.4.1.169.8.101 | NodesnetSwitchNeighborValidationFailed | A ServerNet Switch failed neighbor validation on one of its ports. The offending node will not be able to receive or transmit ServerNet data packets until the … | ||
| 1.3.6.1.4.1.169.8.102 | NodesnetSwitchLinkLevelError | ServerNet Switch has detected link level errors. Possible Cause / Solution: Bad node: Run diagnostics to validate offending nodes are operating correctly. Loos… | ||
| 1.3.6.1.4.1.169.8.103 | NodesnetSwitchPacketLevelError | ServerNet Switch has detected packet level errors. Possible Cause / Solution: Bad node: Run diagnostics to validate offending nodes are operating correctly. Lo… | ||
| 1.3.6.1.4.1.169.8.104 | NodesnetSwitchIBCError | ServerNet Switch has detected IBC errors. Possible Cause / Solution: Firmware upgrade or Configuration change: This event can be safely ignored if preceding ev… | ||
| 1.3.6.1.4.1.169.8.105 | NodesnetSwitchAccessViolation | The switch has detected a request to or from an invalid id. Possible Cause / Solution: Blabbering node: Run diagnostics to ensure that nodes at both ends of th… | ||
| 1.3.6.1.4.1.169.8.106 | NodesnetSwitchOwnerChange | ServerNet Switch Primary Administrative node change. Possible Cause / Solution: Primary node failed over: If this was by user request, this is a notification o… | ||
| 1.3.6.1.4.1.169.8.107 | NodesnetSwitchFirmwareUpgrade | A firmware upgrade has been performed on the specified switch. Possible Cause / Solution: Switch firmware has been upgraded. Notification only. No action in ne… | ||
| 1.3.6.1.4.1.169.8.108 | NodesnetSwitchSANManFailover | Administrative node failover has been detected. The type of failure detected is reflected in the event type. Possible Cause / Solution: Primary or backup admin… | ||
| 1.3.6.1.4.1.169.8.109 | NodesnetSwitchTopologyConfigUpdate | Configuration of the ServerNet topology has changed. Possible Cause / Solution: Switch or end node configuration has been updated. Notification only, no action… | ||
| 1.3.6.1.4.1.169.8.110 | NodesnetSwitchFanFailure | ServerNet Switch detected a fan failure. The power module should be replaced immediately to prevent switch component damage. Possible Cause / Solution: A switc… |