T1-OPT-MIB
124 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter enterprises Gauge |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.449 | Nodecodex | |||
| 1.3.6.1.4.1.449.2 | NodecdxProductSpecific | |||
| 1.3.6.1.4.1.449.2.1 | Nodecdx6500 | |||
| 1.3.6.1.4.1.449.2.1.2 | Nodecdx6500Configuration | |||
| 1.3.6.1.4.1.449.2.1.2.1 | Nodecdx6500CfgProtocolGroup | |||
| 1.3.6.1.4.1.449.2.1.2.1.1 | Nodecdx6500PCTPortProtocolGroup | |||
| 1.3.6.1.4.1.449.2.1.2.1.1.24 | Nodecdx6500PCTT1E1PortTable | |||
| 1.3.6.1.4.1.449.2.1.2.1.1.24.1 | Nodecdx6500PCTT1PortTable | |||
| 1.3.6.1.4.1.449.2.1.2.1.1.24.1.1 | Tablecdx6500PPCTT1PortTable | not-accessible | mandatory | This table contains the T1 (Physical) Port Configuration parameters. |
| 1.3.6.1.4.1.449.2.1.2.1.1.24.1.1.1 | Tablecdx6500PPCTT1PortEntry | not-accessible | mandatory | A T1 Port Configuration Table Entry. Each entry contains the configuration parameters for a single T1 port. |
| 1.3.6.1.4.1.449.2.1.2.1.1.24.1.1.1.1 | Rowcdx6500T1CfgPortNumber | read-only | mandatory | Port number of the (physical) T1 port. |
| 1.3.6.1.4.1.449.2.1.2.1.1.24.1.1.1.2 | Rowcdx6500T1CfgPortType | read-only | mandatory | This is a digital port having interface type T1. t1 : This is a T1 port. |
| 1.3.6.1.4.1.449.2.1.2.1.1.24.1.1.1.3 | Rowcdx6500T1CfgFormat | read-only | mandatory | This parameter is used to select the format of the T1 interface. channelize : DS0 definition fixed, predefined by the telco or the user. isdn : DS0 definition … |
| 1.3.6.1.4.1.449.2.1.2.1.1.24.1.1.1.4 | Rowcdx6500T1CfgLineFramingType | read-only | mandatory | Indicates the type of framing used by the DS1 circuit. esf : Extended SuperFrame. sf : SuperFrame. nc : Skipped during configuration. |
| 1.3.6.1.4.1.449.2.1.2.1.1.24.1.1.1.5 | Rowcdx6500T1CfgLineCoding | read-only | mandatory | Selects the type of suppression used on the T1 link. b8zs :Bipolar 8 Zero Substitution. b7zs :Bipolar 7 zero Substitution. ami :Alternate Mark Inversion. nc : … |
| 1.3.6.1.4.1.449.2.1.2.1.1.24.1.1.1.6 | Rowcdx6500T1CfgTransmitClock | read-only | mandatory | Selects the source of the transmit clock. int : Internal Oscillator. rec : Received Timing. node : Node Timing (timing off another interface). nc : Skipped dur… |
| 1.3.6.1.4.1.449.2.1.2.1.1.24.1.1.1.7 | Rowcdx6500T1CfgLineBuildOut | read-only | mandatory | Select the Line Build Out to match the physical interface. For DSX interfaces, this value is based on cable length as explained below :- lbo0 : 0 ft to 133 ft … |
| 1.3.6.1.4.1.449.2.1.2.1.1.24.1.1.1.8 | Rowcdx6500T1CfgFacilityDataLink | read-only | mandatory | This describes the use of the facilities data link, and may have the following capabilities: none : indicates that the device does not use the FDL. ansi : refe… |
| 1.3.6.1.4.1.449.2.1.2.1.1.24.1.1.1.9 | Rowcdx6500T1CfgThresholdValueLES | read-only | mandatory | Threshold value of Line Errored Seconds (LESs) to report alarms on CTP when exceeded. |
| 1.3.6.1.4.1.449.2.1.2.1.1.24.1.1.1.10 | Rowcdx6500T1CfgThresholdValueLCV | read-only | mandatory | Threshold value of Line Code Violations (LCVs) to report alarms on CTP when exceeded. |
| 1.3.6.1.4.1.449.2.1.2.1.1.24.1.1.1.11 | Rowcdx6500T1CfgThresholdValuePCV | read-only | mandatory | Threshold value of Path Code Violations (PCVs) to report alarms on CTP when exceeded. |
| 1.3.6.1.4.1.449.2.1.2.1.1.24.1.1.1.12 | Rowcdx6500T1CfgThresholdValueCSS | read-only | mandatory | Threshold value of Controlled Slip Seconds (CSSs) to report alarms on CTP when exceeded. |
| 1.3.6.1.4.1.449.2.1.2.1.1.24.1.1.1.13 | Rowcdx6500T1CfgThresholdValueES | read-only | mandatory | Threshold value of Errored Seconds (ESs) to report alarms on CTP when exceeded. |
| 1.3.6.1.4.1.449.2.1.2.1.1.24.1.1.1.14 | Rowcdx6500T1CfgThresholdValueBES | read-only | mandatory | Threshold value of Bursty Errored Seconds (BESs) to report alarms on CTP when exceeded. |
| 1.3.6.1.4.1.449.2.1.2.1.1.24.1.1.1.15 | Rowcdx6500T1CfgThresholdValueSES | read-only | mandatory | Threshold value of Severely Errored Seconds (SESs) to report alarms on CTP when exceeded. |
| 1.3.6.1.4.1.449.2.1.2.1.1.24.1.1.1.16 | Rowcdx6500T1CfgThresholdValueSEFS | read-only | mandatory | Threshold value of Severely Errored Framing Seconds (SEFSs) to report alarms on CTP when exceeded. |
| 1.3.6.1.4.1.449.2.1.2.1.1.24.1.1.1.17 | Rowcdx6500T1CfgThresholdValueUAS | read-only | mandatory | Threshold value of Unavailable Seconds (UASs) to report alarms on CTP when exceeded. |
| 1.3.6.1.4.1.449.2.1.2.1.1.24.1.1.1.18 | Rowcdx6500T1CfgThresholdValueDM | read-only | mandatory | Threshold value of Degraded Minutes (DMs) to report alarms on CTP when exceeded. |
| 1.3.6.1.4.1.449.2.1.2.1.1.24.1.1.1.19 | Rowcdx6500T1CfgSwitchType | read-only | mandatory | The ISDN switch type. This specifies the type of equipment to which this span is connected. The possible choices are: att4ess : AT&T 4ESS Switch att5ess : AT&T… |
| 1.3.6.1.4.1.449.2.1.2.1.1.24.1.1.1.20 | Rowcdx6500T1CfgVariant | read-only | mandatory | Select the ISDN Switch variant. This parameter depends upon the switch type configured. The possible choices are: att : AT&T Custom nt : Northern Telecom isdn2… |
| 1.3.6.1.4.1.449.2.1.2.1.1.24.1.1.1.21 | Rowcdx6500T1CfgUserNetworkSide | read-only | mandatory | This parameter specifies whether the T1/E1 port is emulating the network or user side of the ISDN network. user : The T1 or E1 port is emulating the user, ex. … |
| 1.3.6.1.4.1.449.2.1.2.1.1.24.1.1.1.22 | Rowcdx6500T1CfgCallingIdMsbState | read-only | mandatory | For DMS100/250 switches, this parameter defines if the MSB is set or clear in the Calling ID IE. disabled : The MSB in the calling ID IE is cleared. enabled : … |
| 1.3.6.1.4.1.449.2.1.3 | Nodecdx6500Statistics | |||
| 1.3.6.1.4.1.449.2.1.3.1 | Nodecdx6500StatProtocolGroup | |||
| 1.3.6.1.4.1.449.2.1.3.1.1 | Nodecdx6500PSTPortProtocolGroup | |||
| 1.3.6.1.4.1.449.2.1.3.1.1.25 | Nodecdx6500PSTT1E1PortTable | |||
| 1.3.6.1.4.1.449.2.1.3.1.1.25.1 | Tablecdx6500PPSTT1PortTable | not-accessible | mandatory | This table holds statistics information for T1 ports. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.1.1 | Rowcdx6500PPSTT1PortEntry | not-accessible | mandatory | Each entry contains statistics information for one T1 port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.1.1.1 | Columncdx6500T1StatPortNumber | read-only | mandatory | The port number of the T1 port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.1.1.2 | Columncdx6500T1StatTimeSinceLastResetType | read-only | mandatory | Time since last reset has happened for the port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.1.1.3 | Columncdx6500T1StatPortType | read-only | mandatory | The configured value of the Port Type. illegal : Invalid port type. null : This is a null port. t1 : This is a digital port with interface type T1. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.1.1.4 | Columncdx6500T1StatInterfaceType | read-only | mandatory | This parameter indicates the type of interface for this port. dsx1 : This port has a DSX1 interface. ds1Csu : This port has a DS1-CSU interface. na : Value not… |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.1.1.5 | Columncdx6500T1StatPortState | read-only | mandatory | The current port (CTP) state : disabled : The port has been disabled. enabled : The port has been enabled. na : Value not available. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.1.1.6 | Columncdx6500T1StatAlarmState | read-only | mandatory | The alarm state of the port : none : No alarm. yellow : Remote alarm indication (yellow alarm). blue : Alarm indication signal (blue alarm). red : No frame syn… |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.1.1.7 | Columncdx6500T1BoardHWRevAndPartNumber | read-only | mandatory | Hardware Revision and part number of the board. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.3 | Tablecdx6500T1StatDailyHistoryTable | not-accessible | mandatory | The T1 Daily History Table contains various statistics collected over the previous 24 hours which are broken into 96 completed 15 minute intervals. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.3.1 | Rowcdx6500T1StatDailyHistoryEntry | not-accessible | mandatory | An entry in the T1 Daily History Table. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.3.1.1 | Columncdx6500T1StatDailyHistoryInterval | read-only | mandatory | This gives the history at 15 minute intervals.Each block represents a 15 minute interval of the day, starting from 00:15 and ending at 24:00.Thus there are 96 … |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.3.1.2 | Columncdx6500T1StatDailyHistoryLES | read-only | mandatory | The number of Line Errored Seconds (LESs) encountered by the T1 interface in one of the previous 96, individual 15 minute intervals. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.3.1.3 | Columncdx6500T1StatDailyHistoryLCV | read-only | mandatory | The number of Line Code Violations (LCVs) encountered by the T1 interface in one of the previous 96, individual 15 minute intervals. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.3.1.4 | Columncdx6500T1StatDailyHistoryPCV | read-only | mandatory | The number of Path Coding Violations (PCVs) encountered by the T1 interface in one of the previous 96, individual 15 minute intervals. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.3.1.5 | Columncdx6500T1StatDailyHistoryCSS | read-only | mandatory | The number of Controlled Slip Seconds (CSSs) encountered by the T1 interface in one of the previous 96, individual 15 minute intervals. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.3.1.6 | Columncdx6500T1StatDailyHistoryES | read-only | mandatory | The number of Errored Seconds (ESs) encountered by the T1 interface in one of the previous 96, individual 15 minute intervals. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.3.1.7 | Columncdx6500T1StatDailyHistoryBES | read-only | mandatory | The number of Bursty Errored Seconds (BESs) encountered by the T1 interface in one of the previous 96, individual 15 minute intervals. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.3.1.8 | Columncdx6500T1StatDailyHistorySES | read-only | mandatory | The number of Severely Errored Seconds (SESs) encountered by the T1 interface in one of the previous 96, individual 15 minute intervals. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.3.1.9 | Columncdx6500T1StatDailyHistorySEFS | read-only | mandatory | The number of Severely Errored Framing Seconds (SEFSs) encountered by the T1 interface in one of the previous 96, individual 15 minute intervals. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.3.1.10 | Columncdx6500T1StatDailyHistoryUAS | read-only | mandatory | The number of Unavailable Seconds (UASs) encountered by the T1 interface in one of the previous 96, individual 15 minute intervals. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.3.1.11 | Columncdx6500T1StatDailyHistoryDM | read-only | mandatory | The number of Degraded Minutes (DMs) encountered by the T1 interface in one of the previous 96, individual 15 minute intervals. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.3.1.12 | Columncdx6500T1StatDailyHistoryPortNumber | read-only | mandatory | The port number of the T1 port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.5 | Tablecdx6500T1StatABCDStateTable | not-accessible | mandatory | The ABCD State Table contains the current TX / RX ABCD state of the Configured DS0 Channels. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.5.1 | Rowcdx6500T1StatABCDStateEntry | not-accessible | mandatory | An entry in the ABCD State Table. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.5.1.1 | Columncdx6500T1StatABCDStateDS0ChannelNumber | read-only | mandatory | Channel number of the configured DS0 channel. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.5.1.2 | Columncdx6500T1StatABCDStateCurrentTxState | read-only | deprecated | Current TX ABCD state of the configured DS0 channels. This object is no longer supported. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.5.1.3 | Columncdx6500T1StatABCDStateCurrentRxState | read-only | mandatory | Current RX ABCD state of the configured DS0 channels. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.5.1.4 | Columncdx6500T1StatABCDStatePortNumber | read-only | mandatory | Port number of the T1 port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.7 | Tablecdx6500T1ISDNStatusTable | not-accessible | mandatory | This table holds ISDN statistics information for T1 ports. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.7.1 | Rowcdx6500T1StatISDNStatusEntry | not-accessible | mandatory | Each entry contains statistics information for one T1 port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.7.1.1 | Columncdx6500T1StatISDNStatusPortNumber | read-only | mandatory | The port number of the T1 port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.7.1.2 | Columncdx6500T1StatNumRxCallsSinceLastReset | read-only | mandatory | The number of inbound calls that were attempted since the last statistics reset. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.7.1.3 | Columncdx6500T1StatNumRxCallsRejected | read-only | mandatory | The number of inbound calls that were rejected since the last statistics reset. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.7.1.4 | Columncdx6500T1StatRxLastCallFailureCause | read-only | mandatory | The reason the last inbound call was rejected, since the last statistics reset. The posssible values are: noFailureReported : No call failure noAvailableVirtua… |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.7.1.5 | Columncdx6500T1StatRxLastCalledNumber | read-only | mandatory | The phone number of the virtual port of the last ISDN call made into this node. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.7.1.6 | Columncdx6500T1StatRxLastCallingNumber | read-only | mandatory | The phone number of last party to make an ISDN call into this node. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.7.1.7 | Columncdx6500T1StatRxMinCallDuration | read-only | mandatory | The minimum call duration of all inbound ISDN calls made into this node, since the last statistics reset. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.7.1.8 | Columncdx6500T1StatRxMaxCallDuration | read-only | mandatory | The maximum call duration of all inbound ISDN calls made into this node, since the last statistics reset. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.7.1.9 | Columncdx6500T1StatRxAvgCallDuration | read-only | mandatory | The average call duration of all inbound ISDN calls made into this node, since the last statistics reset. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.7.1.10 | Columncdx6500T1StatNumTxCallsSinceLastReset | read-only | mandatory | The number of outbound calls that were attempted since the last statistics reset. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.7.1.11 | Columncdx6500T1StatNumTxCallsRejected | read-only | mandatory | The number of outbound calls that were rejected since the last statistics reset. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.7.1.12 | Columncdx6500T1StatTxLastCallFailureCause | read-only | mandatory | The reason the last outbound call was rejected, since the last statistics reset. The posssible values are: noFailureReported : No call failure noAvailableVirtu… |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.7.1.13 | Columncdx6500T1StatTxLastCalledNumber | read-only | mandatory | The phone number of the last ISDN call made by a virtual port from this node. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.7.1.14 | Columncdx6500T1StatTxLastCallingNumber | read-only | mandatory | The phone number of the virtual port that made the last ISDN call from this node. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.7.1.15 | Columncdx6500T1StatTxMinCallDuration | read-only | mandatory | The minimum call duration of all outbound ISDN calls made from this node, since the last statistics reset. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.7.1.16 | Columncdx6500T1StatTxMaxCallDuration | read-only | mandatory | The maximum call duration of all outbound ISDN calls made from this node, since the last statistics reset. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.7.1.17 | Columncdx6500T1StatTxAvgCallDuration | read-only | mandatory | The average call duration of all outbound ISDN calls made from this node, since the last statistics reset. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.7.1.18 | Columncdx6500T1StatDchannelState | read-only | mandatory | Specifies the status of the D Channel. up : The D Channel is up. down : The D Channel is down. na : Value not available. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.9 | Tablecdx6500T1ISDNCallSummaryTable | not-accessible | mandatory | This table holds ISDN call summary information for T1 ports. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.9.1 | Rowcdx6500T1StatISDNCallSummaryEntry | not-accessible | mandatory | An entry in the ISDN call summary table. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.9.1.1 | Columncdx6500T1StatISDNBChannelNumber | read-only | mandatory | B-Channel number of the ISDN Channel. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.9.1.2 | Columncdx6500T1StatISDNBChannelStatus | read-only | mandatory | Status of the ISDN B-Channel. The posssible values are: idle : The B-Channel is in the idle state. ringing : The B-Channel is in the ringing state. connected :… |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.9.1.3 | Columncdx6500T1StatISDNCallDirection | read-only | mandatory | Direction of the ISDN call on the B-Channel. The posssible values are: inbound : The current call is in the inbound direction. outbound : The current call is i… |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.9.1.4 | Columncdx6500T1StatISDNCallingNumber | read-only | mandatory | This is the phone number of the party originating the ISDN call. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.9.1.5 | Columncdx6500T1StatISDNCalledNumber | read-only | mandatory | This is the phone number of the party at the destination end of the ISDN call. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.9.1.6 | Columncdx6500T1StatISDNDS0Rate | read-only | mandatory | DS0 Rate of the ISDN B-Channel. The posssible values are: ds056k : The DS0 Rate is 56K. ds064k : The DS0 Rate is 64K. na : Value not available. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.9.1.7 | Columncdx6500T1StatISDNVirtualPortNumber | read-only | mandatory | Virtual Port Number of the port using this B-Channel. A value of 0 implies that no virtual port is currently using the B-Channel. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.9.1.8 | Columncdx6500T1StatISDNTimeCallStarted | read-only | mandatory | This is the duration that the current call on this B-Channel has been connected. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.9.1.9 | Columncdx6500T1StatISDNPortNumber | read-only | mandatory | Port number of the T1 port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.11 | Tablecdx6500T1StatLast24HoursReportTable | not-accessible | mandatory | This table holds a report of the cumulative sum of the statistics for the previous 24 hour interval. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.11.1 | Rowcdx6500T1StatLast24HoursReportEntry | not-accessible | mandatory | Each entry contains statistics information for one T1 port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.11.1.1 | Columncdx6500T1StatLast24HoursReportPortNumber | read-only | mandatory | Port number of the T1 port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.11.1.2 | Columncdx6500T1StatLast24HoursReportLES | read-only | mandatory | The number of Line Errored Seconds (LESs) encountered by the T1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.11.1.3 | Columncdx6500T1StatLast24HoursReportLCV | read-only | mandatory | The number of Line Code Violations (LCVs) encountered by the T1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.11.1.4 | Columncdx6500T1StatLast24HoursReportPCV | read-only | mandatory | The number of Path Coding Violations (PCVs) encountered by the T1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.11.1.5 | Columncdx6500T1StatLast24HoursReportCSS | read-only | mandatory | The number of Controlled Slip Seconds (CSSs) encountered by the T1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.11.1.6 | Columncdx6500T1StatLast24HoursReportES | read-only | mandatory | The number of Errored Seconds (ESs) encountered by the T1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.11.1.7 | Columncdx6500T1StatLast24HoursReportBES | read-only | mandatory | The number of Bursty Errored Seconds (BESs) encountered by the T1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.11.1.8 | Columncdx6500T1StatLast24HoursReportSES | read-only | mandatory | The number of Severely Errored Seconds (SESs) encountered by the T1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.11.1.9 | Columncdx6500T1StatLast24HoursReportSEFS | read-only | mandatory | The number of Severely Errored Framing Seconds (SEFSs) encountered by the T1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.11.1.10 | Columncdx6500T1StatLast24HoursReportUAS | read-only | mandatory | The number of Unavailable Seconds (UASs) encountered by the T1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.13 | Tablecdx6500T1StatCurrent15MinutesReportTable | not-accessible | mandatory | This table holds a report of the statistics for the current 15 minutes interval. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.13.1 | Rowcdx6500T1StatCurrent15MinutesReportEntry | not-accessible | mandatory | Each entry contains statistics information for one T1 port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.13.1.1 | Columncdx6500T1StatCurrent15MinutesReportPortNumber | read-only | mandatory | Port number of the T1 port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.13.1.2 | Columncdx6500T1StatCurrent15MinutesReportTimeElapsed | read-only | mandatory | The time that has elapsed since the beginning of the current 15 minutes interval. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.13.1.3 | Columncdx6500T1StatCurrent15MinutesReportLES | read-only | mandatory | The number of Line Errored Seconds (LESs) encountered by the T1 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.13.1.4 | Columncdx6500T1StatCurrent15MinutesReportLCV | read-only | mandatory | The number of Line Code Violations (LCVs) encountered by the T1 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.13.1.5 | Columncdx6500T1StatCurrent15MinutesReportPCV | read-only | mandatory | The number of Path Coding Violations (PCVs) encountered by the T1 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.13.1.6 | Columncdx6500T1StatCurrent15MinutesReportCSS | read-only | mandatory | The number of Controlled Slip Seconds (CSSs) encountered by the T1 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.13.1.7 | Columncdx6500T1StatCurrent15MinutesReportES | read-only | mandatory | The number of Errored Seconds (ESs) encountered by the T1 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.13.1.8 | Columncdx6500T1StatCurrent15MinutesReportBES | read-only | mandatory | The number of Bursty Errored Seconds (BESs) encountered by the T1 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.13.1.9 | Columncdx6500T1StatCurrent15MinutesReportSES | read-only | mandatory | The number of Severely Errored Seconds (SESs) encountered by the T1 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.13.1.10 | Columncdx6500T1StatCurrent15MinutesReportSEFS | read-only | mandatory | The number of Severely Errored Framing Seconds (SEFSs) encountered by the T1 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.449.2.1.3.1.1.25.13.1.11 | Columncdx6500T1StatCurrent15MinutesReportUAS | read-only | mandatory | The number of Unavailable Seconds (UASs) encountered by the T1 interface in the current 15 minute interval. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DisplayString | OCTET STRING | ||
| PhysicalPortNumber | INTEGER (49..50) | ||
| VirtualPortNumber | INTEGER (100..255) |