TBOP-OPT-MIB
59 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter enterprises |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.449 | Nodecodex | |||
| 1.3.6.1.4.1.449.2 | NodecdxProductSpecific | |||
| 1.3.6.1.4.1.449.2.1 | Nodecdx6500 | |||
| 1.3.6.1.4.1.449.2.1.2 | Nodecdx6500Configuration | |||
| 1.3.6.1.4.1.449.2.1.2.1 | Nodecdx6500CfgProtocolGroup | |||
| 1.3.6.1.4.1.449.2.1.2.1.1 | Nodecdx6500PCTPortProtocolGroup | |||
| 1.3.6.1.4.1.449.2.1.2.1.1.7 | Tablecdx6500PPCTTBOPPortTable | not-accessible | mandatory | This table contains TBOP Port configuration parameters. |
| 1.3.6.1.4.1.449.2.1.2.1.1.7.1 | Rowcdx6500PPCTTBOPPortEntry | not-accessible | mandatory | Each PortEntry contains the configuration parameters for one TBOP port. |
| 1.3.6.1.4.1.449.2.1.2.1.1.7.1.1 | Columncdx6500TBOPCfgPortNumber | read-only | mandatory | Port number of the port being used by TBOP. |
| 1.3.6.1.4.1.449.2.1.2.1.1.7.1.2 | Columncdx6500TBOPCfgPortEIAOpt | read-only | mandatory | Specifies the control signal handshake and clocking required for a connection to be made to this port legal values are : simp - Simple, no control signals requ… |
| 1.3.6.1.4.1.449.2.1.2.1.1.7.1.3 | Columncdx6500TBOPCfgPortClockType | read-only | mandatory | int - internal clock source. ext - external clock source. newval - same functionality as 'int', new enumeration added for RFC1155 compatibility. nc - parameter… |
| 1.3.6.1.4.1.449.2.1.2.1.1.7.1.4 | Columncdx6500TBOPCfgPortClockSpeed | read-only | mandatory | This is the speed of the port in bits per second, Clock Source = int. Legal Range=1200-384000. A value 0 indicates parameter not configured. |
| 1.3.6.1.4.1.449.2.1.2.1.1.7.1.5 | Columncdx6500TBOPCfgPortTxCoding | read-only | mandatory | This is the data encoding used on the TBOP port. nrz - Non Return to Zero. nrzi - Non Return to Zero Inverted. newvalNrz - same functionality as 'nrz', new enu… |
| 1.3.6.1.4.1.449.2.1.2.1.1.7.1.6 | Columncdx6500TBOPCfgPortByteCount | read-only | mandatory | This is the number of bytes collected from the line before data is forwarded. Legal values are : 128, 256, 384, 512, 640, 768, 896, 1036 and 1045. A value 0 in… |
| 1.3.6.1.4.1.449.2.1.2.1.1.7.1.7 | Columncdx6500TBOPCfgPortEIASigAction | read-only | mandatory | This specifies the EIA signaling actions allowed on the port: NONE - none SWITCH - switched carrier CTS - raise CTS in response to RTS A combination of CTS and… |
| 1.3.6.1.4.1.449.2.1.2.1.1.7.1.8 | Columncdx6500TBOPCfgPortOptions | read-only | mandatory | Select options on this TBOP port as follows: none - port uses flag idle between frame exchanges and operates with as little as 2 idle flags between frames. mar… |
| 1.3.6.1.4.1.449.2.1.2.1.1.7.1.9 | Columncdx6500TBOPCfgPortRTSCTSDelay | read-only | mandatory | This specifies how long the TBOP port will delay CTS after RTS is raised when EIA Signaling Action = CTS. The delay is specified in 50 milliseconds units (1 = … |
| 1.3.6.1.4.1.449.2.1.2.1.1.7.1.10 | Columncdx6500TBOPCfgPortDcdOnDelay | read-only | mandatory | This specifies the length of time that DCD is held high before data is transmitted to the attached device. This is used when EIA Signaling Action = SWITCH. The… |
| 1.3.6.1.4.1.449.2.1.2.1.1.7.1.11 | Columncdx6500TBOPCfgPortAutoCallMnem | read-only | mandatory | This mnemonic name is used for auto calling. |
| 1.3.6.1.4.1.449.2.1.2.1.1.7.1.12 | Columncdx6500TBOPCfgPortAutoCallTO | read-only | mandatory | This is the time interval in seconds between call attempts when auto calling. |
| 1.3.6.1.4.1.449.2.1.2.1.1.7.1.13 | Columncdx6500TBOPCfgPortMaxAutoTries | read-only | mandatory | This specifies the number of times the TBOP port will attempt to call. A value of 0 will allow unlimited attempts. |
| 1.3.6.1.4.1.449.2.1.2.1.1.7.1.14 | Columncdx6500TBOPCfgPortSubAddress | read-only | mandatory | Calls addressed to this node, with this subaddress will be routed to this TBOP port. |
| 1.3.6.1.4.1.449.2.1.2.1.1.7.1.15 | Columncdx6500TBOPCfgPortCUG | read-only | mandatory | The TBOP port may be a member of up to 8 different Closed User Groups. Each CUG membership must be a two digit number (except ( e.g. 12,34,56,09,02,03 ). 00-99… |
| 1.3.6.1.4.1.449.2.1.2.1.1.7.1.16 | Columncdx6500TBOPCfgPortEnableBill | read-only | mandatory | This controls whether billing (accounting) records will be created for calls on this TBOP port. newvalOff - same functionality as 'off', new enumeration added … |
| 1.3.6.1.4.1.449.2.1.2.1.1.7.1.17 | Columncdx6500TBOPCfgDimType | read-only | mandatory | This controls the Interface Type. |
| 1.3.6.1.4.1.449.2.1.2.1.1.7.1.18 | Columncdx6500TBOPCfgPortMaxRxQSize | read-only | mandatory | This parameter should be used with extreme caution. If using a non-default value, it is assumed you have discussed your application requirements with the manuf… |
| 1.3.6.1.4.1.449.2.1.2.1.1.7.1.19 | Columncdx6500TBOPCfgPortMaxTxQSize | read-only | mandatory | This defines the maximum number of frames which the outbound queue will contain. These frames are recombined frames, as they were originaly received by the rem… |
| 1.3.6.1.4.1.449.2.1.2.1.1.7.1.20 | Columncdx6500TBOPCfgPortChanT1E1-Conn | read-only | mandatory | This specifies whether a frame check sequence is generated for transmitted frames and whether the frame check sequence is stripped from received frames. It sho… |
| 1.3.6.1.4.1.449.2.1.2.1.1.7.1.21 | Columncdx6500TBOPCfgPortIdleFlagCount | read-only | mandatory | The Minimum number of Idle flags between frames. If MARKi option is used, this should be greater or equal to 2 and this many number of Idle flags will be inser… |
| 1.3.6.1.4.1.449.2.1.2.1.1.7.1.22 | Columncdx6500TBOPCfgPortElectricalInterfaceType | read-only | mandatory | Specify the Electrical Interface Type: V.24 - V.24 Electrical Interface Type V.35 - V.35 Electrical Interface Type V.36 - V.36 Electrical Interface Type X.21 -… |
| 1.3.6.1.4.1.449.2.1.2.1.1.7.1.23 | Columncdx6500TBOPCfgPortV24ElectricalInterfaceOption | read-only | mandatory | Specify the Pin 22 option: RI - V.24 uses Pin 22 for Ring Indicator output signal TM - V.24 uses Pin 22 for Test Mode input signal |
| 1.3.6.1.4.1.449.2.1.2.1.1.7.1.24 | Columncdx6500TBOPCfgPortHighSpeedElectricalInterfaceOption | read-only | mandatory | Specify the cable type: NONE - V.35/V.36/X.21 DCE with straight through cable XOVER - V.35/V.36/X.21 DCE with crossover adapter cable |
| 1.3.6.1.4.1.449.2.1.2.1.1.7.1.25 | Columncdx6500TBOPCfgPortMaxFrameSize | read-only | mandatory | This defines the maximum frame size which can be received by TBOP. The frame size is defined as the total number of octets in between flags. This parameter mus… |
| 1.3.6.1.4.1.449.2.1.3 | Nodecdx6500Statistics | |||
| 1.3.6.1.4.1.449.2.1.3.1 | Nodecdx6500StatProtocolGroup | |||
| 1.3.6.1.4.1.449.2.1.3.1.1 | Nodecdx6500PSTPortProtocolGroup | |||
| 1.3.6.1.4.1.449.2.1.3.1.1.7 | Tablecdx6500PPSTTBOPPortTable | not-accessible | mandatory | This table holds statistics items for TBOP ports |
| 1.3.6.1.4.1.449.2.1.3.1.1.7.1 | Rowcdx6500PPSTTBOPPortEntry | not-accessible | mandatory | This entry holds the statistics items for one TBOP port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.7.1.1 | Columncdx6500TBOPStPortNumber | read-only | mandatory | The port number for this TBOP entry. |
| 1.3.6.1.4.1.449.2.1.3.1.1.7.1.2 | Columncdx6500TBOPStPortStatus | read-only | mandatory | Specifies current port Status. Up : Port is enabled by the CTP Disabled : Port is disabled by CTP Busy Out : The port is busy out by the CTP Down : Port is not… |
| 1.3.6.1.4.1.449.2.1.3.1.1.7.1.3 | Columncdx6500TBOPStPortState | read-only | mandatory | The EIA state of the port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.7.1.4 | Columncdx6500TBOPStPortSpeed | read-only | mandatory | The measured port speed in bits per second. |
| 1.3.6.1.4.1.449.2.1.3.1.1.7.1.5 | Columncdx6500TBOPStOverrunErrors | read-only | mandatory | Total number of overrun errors counted by the I/O driver. |
| 1.3.6.1.4.1.449.2.1.3.1.1.7.1.6 | Columncdx6500TBOPStUnderrunErrors | read-only | mandatory | Total number of underrun errors counted by the I/O driver. |
| 1.3.6.1.4.1.449.2.1.3.1.1.7.1.7 | Columncdx6500TBOPStCRCErrors | read-only | mandatory | Total number of CRC errors counted by the I/O driver. |
| 1.3.6.1.4.1.449.2.1.3.1.1.7.1.8 | Columncdx6500TBOPStPortRxChars | read-only | mandatory | Total number of data characters received since last boot or statistics reset, header characters are not included. |
| 1.3.6.1.4.1.449.2.1.3.1.1.7.1.9 | Columncdx6500TBOPStPortRxCharsSec | read-only | mandatory | The average number of characters received per second. |
| 1.3.6.1.4.1.449.2.1.3.1.1.7.1.10 | Columncdx6500TBOPStPortRxFrames | read-only | mandatory | Total number of SDLC frames received since last boot or statistices reset. |
| 1.3.6.1.4.1.449.2.1.3.1.1.7.1.11 | Columncdx6500TBOPStPortRxFramesSec | read-only | mandatory | The average number of frames received per second. |
| 1.3.6.1.4.1.449.2.1.3.1.1.7.1.12 | Columncdx6500TBOPStPortTxChars | read-only | mandatory | Total number of data characters transmitted since last boot or statistics reset, header characters are not included. |
| 1.3.6.1.4.1.449.2.1.3.1.1.7.1.13 | Columncdx6500TBOPStPortTxCharsSec | read-only | mandatory | The average number of characters transmitted per second. |
| 1.3.6.1.4.1.449.2.1.3.1.1.7.1.14 | Columncdx6500TBOPStPortTxFrames | read-only | mandatory | Total number of SDLC frames trnsmitted since last boot or statistics reset. |
| 1.3.6.1.4.1.449.2.1.3.1.1.7.1.15 | Columncdx6500TBOPStPortTxFramesSec | read-only | mandatory | The average number of frames transmitted per second. |
| 1.3.6.1.4.1.449.2.1.3.1.1.7.1.16 | Columncdx6500TBOPStPortRxUtil | read-only | mandatory | Percentage of port receive bandwidth used. |
| 1.3.6.1.4.1.449.2.1.3.1.1.7.1.17 | Columncdx6500TBOPStPortTxUtil | read-only | mandatory | Percentage of port transmit bandwidth used. |
| 1.3.6.1.4.1.449.2.1.3.1.1.7.1.18 | Columncdx6500TBOPStPortFramesQueued | read-only | mandatory | Number of SDLC frames queued to the I/O drivers. |
| 1.3.6.1.4.1.449.2.1.4 | Nodecdx6500Controls |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Counter16 | INTEGER (0..65535) | ||
| DisplayString | OCTET STRING |