TE-LINK-MIB
77 objects
Copyright (C) 2003 The Internet Society. This version of this MIB module is part of RFCXXXX; see the RFC itself for full legal notices. This MIB module contains managed object definitions for MPLS traffic engineering links as defined in 'Link Bundling in MPLS Traffic Engineering'.
Imported Objects
| IF-MIB | ifIndex InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | mib-2 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus StorageType TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1 | IdentityteLinkMIB | Copyright (C) 2003 The Internet Society. This version of this MIB module is part of RFCXXXX; see the RFC itself for full legal notices. This MIB module contain… | ||
| 1.3.6.1.2.1.0 | NodeteLinkNotifications | |||
| 1.3.6.1.2.1.0.1 | NotificationlinkBundleMismatch | current | This notification is generated when a mismatch is found on a bundled link. Such mismatch can be detected for instance if one of the traffic engineering paramet… | |
| 1.3.6.1.2.1.1 | NodeteLinkObjects | |||
| 1.3.6.1.2.1.1.1 | TableteLinkTable | not-accessible | current | This table specifies the grouping of component links into TE links and grouping of TE links into bundled links. |
| 1.3.6.1.2.1.1.1.1 | RowteLinkEntry | not-accessible | current | An entry in this table exists for each ifEntry with an ifType of teLink(200), i.e. for every TE link. An ifEntry in the ifTable must exist before a teLinkEntry… |
| 1.3.6.1.2.1.1.1.1.1 | ColumnteLinkAddressType | read-create | current | The type of Internet address for the TE link. Only IPv4, IPv6 and unknown (for unnumbered links) need to be supported. |
| 1.3.6.1.2.1.1.1.1.2 | ColumnteLinkLocalIpAddr | read-create | current | For IPv4 and IPv6 numbered links, this object represents the local IP address associated with the TE link. For unnumbered link, the local address is not stored… |
| 1.3.6.1.2.1.1.1.1.3 | ColumnteLinkRemoteIpAddr | read-create | current | The remote IP address associated with the TE link (IPv4 and IPv6 numbered links). For unnumbered links, the remote address is not stored in this object, but ra… |
| 1.3.6.1.2.1.1.1.1.4 | ColumnteLinkMetric | read-create | current | The traffic engineering metric for the TE link is derived from its component links. All component links within the TE link must have the same traffic engineeri… |
| 1.3.6.1.2.1.1.1.1.5 | ColumnteLinkMuxCapability | read-create | current | This attribute specifies link multiplex capability of the TE link, which is derived from its component links. All component links within the same TE link must … |
| 1.3.6.1.2.1.1.1.1.6 | ColumnteLinkProtectionType | read-create | current | This attribute specifies link protection type of the TE link. Description of the different protection types can be found in the 'Routing Extensions in Support … |
| 1.3.6.1.2.1.1.1.1.7 | ColumnteLinkWorkingPriority | read-create | current | This object represents a priority value such that a new connection with a higher priority, i.e. numerically lower than this value, is guaranteed to be setup on… |
| 1.3.6.1.2.1.1.1.1.8 | ColumnteLinkResourceClass | read-create | current | This attribute specifies the TE link resource class. The resource class is a 32 bit bitfield. The resource class for a link bundle is derived from the resource… |
| 1.3.6.1.2.1.1.1.1.9 | ColumnteLinkIncomingIfId | read-create | current | For unnumbered links, the incoming interface is set to the outgoing interface identifier chosen by the neighboring LSR for the reverse link corresponding to th… |
| 1.3.6.1.2.1.1.1.1.10 | ColumnteLinkOutgoingIfId | read-create | current | If the link is unnumbered, the outgoing interface identifier is set to the outgoing interface identifier chosen for the TE link by the advertising LSR. For num… |
| 1.3.6.1.2.1.1.1.1.11 | ColumnteLinkRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. All read-create objects can only be changed when teLinkRowStatus is notInService(2)… |
| 1.3.6.1.2.1.1.1.1.12 | ColumnteLinkStorageType | read-create | current | The storage type for this conceptual row in the teLinkTable. Conceptual rows having the value 'permanent' need not allow write-access to any columnar object in… |
| 1.3.6.1.2.1.1.2 | TableteLinkDescriptorTable | not-accessible | current | This table specifies the link descriptors associated with the TE links. |
| 1.3.6.1.2.1.1.2.1 | RowteLinkDescriptorEntry | not-accessible | current | An entry in this table is created for every TE link descriptor. An ifEntry in the ifTable must exist before a teLinkDescriptorEntry using the same ifIndex is c… |
| 1.3.6.1.2.1.1.2.1.1 | ColumnteLinkDescriptorId | not-accessible | current | This object specifies the link descriptor identifier. |
| 1.3.6.1.2.1.1.2.1.2 | ColumnteLinkDescrEncodingType | read-create | current | This attribute specifies the TE link encoding type. |
| 1.3.6.1.2.1.1.2.1.3 | ColumnteLinkDescrPriority | read-create | current | This object specifies the lowest priority at which that link encoding type is available. |
| 1.3.6.1.2.1.1.2.1.4 | ColumnteLinkDescrMinResBandwidth | read-create | current | This attribute specifies the minimum reservable bandwidth on the TE link. This is derived from the union of the minimum reservable bandwidth of all the compone… |
| 1.3.6.1.2.1.1.2.1.5 | ColumnteLinkDescrMaxResBandwidth | read-create | current | This attribute specifies the maximum reservable bandwidth on the TE link. This is the union of the maximum reservable bandwidth of all the component links with… |
| 1.3.6.1.2.1.1.2.1.6 | ColumnteLinkDescrRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. No read-create object can changed if teLinkDescrRowStatus is in active(1) state. |
| 1.3.6.1.2.1.1.2.1.7 | ColumnteLinkDescrStorageType | read-create | current | The storage type for this conceptual row in the teLinkDescriptorTable. Conceptual rows having the value 'permanent' need not allow write-access to any columnar… |
| 1.3.6.1.2.1.1.3 | TableteLinkSrlgTable | not-accessible | current | This table specifies the SRLGs associated with TE links. |
| 1.3.6.1.2.1.1.3.1 | RowteLinkSrlgEntry | not-accessible | current | An entry in this table contains information about a SRLG associated with a TE link. An ifEntry in the ifTable must exist before a teLinkSrlgEntry using the sam… |
| 1.3.6.1.2.1.1.3.1.1 | Columnsrlg | not-accessible | current | This identifies a SRLG supported by the TE link. An SRLG is identified with a 32 bit number that is unique within an IGP domain. Zero is a valid SRLG number. |
| 1.3.6.1.2.1.1.3.1.2 | ColumnsrlgRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. No read-create object can be modified if srlgRowStatus is active(1). |
| 1.3.6.1.2.1.1.3.1.3 | ColumnsrlgStorageType | read-create | current | The storage type for this conceptual row in the teLinkSrlgTable. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objec… |
| 1.3.6.1.2.1.1.4 | TableteLinkBandwidthTable | not-accessible | current | This table specifies the priority-based bandwidth table for TE links. |
| 1.3.6.1.2.1.1.4.1 | RowteLinkBandwidthEntry | not-accessible | current | An entry in this table contains information about the priority-based bandwidth of TE links. An ifEntry in the ifTable must exist before a teLinkBandwidthEntry … |
| 1.3.6.1.2.1.1.4.1.1 | ColumnteLinkPriority | not-accessible | current | This attribute specifies the priority. A value of 0 is valid as specified in the 'Traffic Engineering Extensions to OSPF Version 2' document. |
| 1.3.6.1.2.1.1.4.1.2 | ColumnteLinkUnreservedBandwidth | read-only | current | This attribute specifies the TE link unreserved bandwidth at priority p. It is the sum of the unreserved bandwidths at priority p of all component links associ… |
| 1.3.6.1.2.1.1.4.1.3 | ColumnteLinkMaximumLspBandwidth | read-create | current | This attribute specifies the TE link maximum LSP bandwidth at priority p. It is the maximum of all maximum LSP bandwidth at priority p of the component links a… |
| 1.3.6.1.2.1.1.4.1.4 | ColumnteLinkBandwidthRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. No read-create object can be modified when teLinkBandwidthRowStatus is active(1). |
| 1.3.6.1.2.1.1.4.1.5 | ColumnteLinkBandwidthStorageType | read-create | current | The storage type for this conceptual row in the teLinkBandwidthTable. Conceptual rows having the value 'permanent' need not allow write-access to any columnar … |
| 1.3.6.1.2.1.1.5 | TablecomponentLinkTable | not-accessible | current | This table specifies the component link parameters. |
| 1.3.6.1.2.1.1.5.1 | RowcomponentLinkEntry | not-accessible | current | An entry in this table exists for each ifEntry that represents a component link. An ifEntry must exist in the ifTable before a componentLinkEntry is created wi… |
| 1.3.6.1.2.1.1.5.1.1 | ColumncomponentLinkMuxCapability | read-create | current | This attribute specifies link multiplexing capabilities of the component link. |
| 1.3.6.1.2.1.1.5.1.2 | ColumncomponentLinkPreferredProtection | read-create | current | This attribute specifies whether this component link is a primary or secondary entity. |
| 1.3.6.1.2.1.1.5.1.3 | ColumncomponentLinkCurrentProtection | read-only | current | This attribute specifies whether this component link is currently used as primary or secondary link. |
| 1.3.6.1.2.1.1.5.1.4 | ColumncomponentLinkRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. No read-create object can be modified when componentLinkRowStatus is active(1). |
| 1.3.6.1.2.1.1.5.1.5 | ColumncomponentLinkStorageType | read-create | current | The storage type for this conceptual row in the componentLinkTable. Conceptual rows having the value 'permanent' need not allow write-access to any columnar ob… |
| 1.3.6.1.2.1.1.6 | TablecomponentLinkDescriptorTable | not-accessible | current | This table specifies the link descriptors associated with the component links. |
| 1.3.6.1.2.1.1.6.1 | RowcomponentLinkDescriptorEntry | not-accessible | current | An entry in this table is created for every component link descriptor. An ifEntry in the ifTable must exist before a componentLinkDescriptorEntry using the sam… |
| 1.3.6.1.2.1.1.6.1.1 | ColumncomponentLinkDescrId | not-accessible | current | This object specifies the link descriptor identifier. |
| 1.3.6.1.2.1.1.6.1.2 | ColumncomponentLinkDescrEncodingType | read-create | current | This attribute specifies the component link encoding type. |
| 1.3.6.1.2.1.1.6.1.3 | ColumncomponentLinkDescrPriority | read-create | current | This object specifies the lowest priority at which that link encoding type is available for the component link. |
| 1.3.6.1.2.1.1.6.1.4 | ColumncomponentLinkDescrMinBandwidth | read-create | current | This attribute specifies the minimum reservable bandwidth on the component link. This value is an estimate in units of 1,000 bits per second. |
| 1.3.6.1.2.1.1.6.1.5 | ColumncomponentLinkDescrMaxBandwidth | read-create | current | This attribute specifies the maximum reservable bandwidth on the component link. This value is an estimate in units of 1,000 bits per second. |
| 1.3.6.1.2.1.1.6.1.6 | ColumncomponentLinkDescrRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. No read-create object can be modified when componentLinkDescrRowStatus is active(1). |
| 1.3.6.1.2.1.1.6.1.7 | ColumncomponentLinkDescrStorageType | read-create | current | The storage type for this conceptual row in the componentLinkDescriptorTable. Conceptual rows having the value 'permanent' need not allow write-access to any c… |
| 1.3.6.1.2.1.1.7 | TablecomponentLinkBandwidthTable | not-accessible | current | This table specifies the priority-based bandwidth for component links. |
| 1.3.6.1.2.1.1.7.1 | RowcomponentLinkBandwidthEntry | not-accessible | current | An entry in this table contains information about the priority-based bandwidth on component links. An ifEntry in the ifTable must exist before a componentLinkB… |
| 1.3.6.1.2.1.1.7.1.1 | ColumncomponentLinkPriority | not-accessible | current | This attribute specifies the priority. A value of 0 is valid as specified in the 'Traffic Engineering Extensions to OSPF Version 2' document. |
| 1.3.6.1.2.1.1.7.1.2 | ColumncomponentLinkUnreservedBandwidth | read-only | current | This attribute specifies the component link unreserved bandwidth at priority p. This value is an estimate in units of 1,000 bits per second. |
| 1.3.6.1.2.1.1.7.1.3 | ColumncomponentLinkMaximumLspBandwidth | read-create | current | This attribute specifies the component link maximum LSP bandwidth at priority p. This value is an estimate in units of 1,000 bits per second. |
| 1.3.6.1.2.1.1.7.1.4 | ColumncomponentLinkBandwidthRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. No read-create object can be modified when componentLinkBandwidthRowStatus is activ… |
| 1.3.6.1.2.1.1.7.1.5 | ColumncomponentLinkBwStorageType | read-create | current | The storage type for this conceptual row in the componentLinkBandwidthTable. Conceptual rows having the value 'permanent' need not allow write-access to any co… |
| 1.3.6.1.2.1.1.8 | ScalarteLinkNotificationsEnabled | read-write | current | If this object is true, then it enables the generation of the TE link notifications, otherwise these notifications are not emitted. |
| 1.3.6.1.2.1.2 | NodeteLinkConformance | |||
| 1.3.6.1.2.1.2.1 | NodeteLinkGroups | |||
| 1.3.6.1.2.1.2.1.1 | GroupteLinkGroup | current | Collection of objects needed for the monitoring of resources associated with TE links. | |
| 1.3.6.1.2.1.2.1.2 | GroupteLinkSrlgGroup | current | Collection of objects needed for the monitoring of SRLG resources associated with TE links. | |
| 1.3.6.1.2.1.2.1.3 | GroupteLinkBandwidthGroup | current | Collection of objects needed for the monitoring of the priority-based bandwidth resources associated with TE links and component links. | |
| 1.3.6.1.2.1.2.1.4 | GroupcomponentLinkBandwidthGroup | current | Collection of objects needed for the monitoring of bandwidth parameters associated with component links. | |
| 1.3.6.1.2.1.2.1.5 | GroupteLinkNotificationGroup | current | Set of notifications implemented in this module. None is mandatory. | |
| 1.3.6.1.2.1.2.2 | NodeteLinkCompliances | |||
| 1.3.6.1.2.1.2.2.1 | ComplianceteLinkModuleFullCompliance | read-only | current | Compliance statement for agents that support the configuration and monitoring of TE Link MIB module. |
| 1.3.6.1.2.1.2.2.2 | ComplianceteLinkModuleReadOnlyCompliance | read-only | current | Compliance statement for agents that support the monitoring of TE link MIB module. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| LinkEncodingType | INTEGER { packet(1), ethernet(2), ansiEtsiPdh(3), sdhItuSonetAnsi(5), digitalWrapper(7), lambda(8), fiber(9), fiberChannel(11) } | current | Link encoding type as specified in 'GMPLS Signaling Functional Description' document. The values specified in this document are not contiguous. |
| LinkProtection | INTEGER { primary(1), secondary(2) } | current | Link protection. |
| Priority | Unsigned32 (0..7) | current | This type is used to represent a priority. Each connection is assigned a priority. This priority is used when accounting for bandwidth on TE links or component links, for resource allocation and for rerouting purposes. … |
| SwitchingCapability | INTEGER { packetSwitch1(1), packetSwitch2(2), packetSwitch3(3), packetSwitch4(4), layer2Switch(51), tdm(100), lambdaSwitch(150), fiberSwitch(200) } | current | Switching capability as specified in the 'OSPF Extensions in Support of Generalized MPLS' document. The values specified in this document are not contiguous. |