TELDAT-CFG-FastCFG-MIB
87 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2007.4.54 | NodeteldatC3FastCfg | |||
| 1.3.6.1.4.1.2007.4.54.1 | Nodeudafocfg | |||
| 1.3.6.1.4.1.2007.4.54.1.1 | TableudafoTcpTable | not-accessible | obsolete | Profiles table for TCP connections. |
| 1.3.6.1.4.1.2007.4.54.1.1.1 | RowudafoTcpEntry | not-accessible | obsolete | Each register is a profile with its parameters. |
| 1.3.6.1.4.1.2007.4.54.1.1.1.1 | ColumnudafoTcpIndex | read-only | obsolete | Table index and number of TCP profile. |
| 1.3.6.1.4.1.2007.4.54.1.1.1.2 | ColumnudafoTcpCommand | read-write | obsolete | Command field to add or delete TCP profiles. (1) ok, if last operation was correct. (just in get process.) (2) add, (just in set process.) (3) delete, (just in… |
| 1.3.6.1.4.1.2007.4.54.1.1.1.3 | ColumnudafoTcpName | read-write | obsolete | TCP profile name.(Up to 15 characters.) Default value: NULL |
| 1.3.6.1.4.1.2007.4.54.1.1.1.4 | ColumnudafoTcpNri | read-write | obsolete | Called Net Address. (Up to 15 digits. X character is also valid.) Default value: XXXXXXXXXXXXXXX |
| 1.3.6.1.4.1.2007.4.54.1.1.1.5 | ColumnudafoTcpMainRemAdd | read-write | obsolete | Ip address of the first remote host. (Up to 25 characters.) Default value: 0.0.0.0 |
| 1.3.6.1.4.1.2007.4.54.1.1.1.6 | ColumnudafoTcpMainRemPort | read-write | obsolete | Port of the first remote host. Range:(0..65535). Default value: 20002 |
| 1.3.6.1.4.1.2007.4.54.1.1.1.7 | ColumnudafoTcpMainRemTmout | read-write | obsolete | Time out reply of the first remote host. Units: seconds. Range: (0..100). Default value: 5 |
| 1.3.6.1.4.1.2007.4.54.1.1.1.8 | ColumnudafoTcpSecRemAdd | read-write | obsolete | Ip address of the second remote host.(Up to 25 characters.) Default value: 0.0.0.0 |
| 1.3.6.1.4.1.2007.4.54.1.1.1.9 | ColumnudafoTcpSecRemPort | read-write | obsolete | Port of the second remote host. Range: (0..65535). Default value: 20002 |
| 1.3.6.1.4.1.2007.4.54.1.1.1.10 | ColumnudafoTcpSecRemTmout | read-write | obsolete | Time out reply of the second remote host. Units: seconds. Range: (0..100). Default value: 5 |
| 1.3.6.1.4.1.2007.4.54.1.1.1.11 | ColumnudafoTcpThirdRemAdd | read-write | obsolete | Ip address of the third remote host.(Up to 25 characters.) Default value: 0.0.0.0 |
| 1.3.6.1.4.1.2007.4.54.1.1.1.12 | ColumnudafoTcpThirdRemPort | read-write | obsolete | Port of the third remote host. Range: (0..65535). Default value: 20002 |
| 1.3.6.1.4.1.2007.4.54.1.1.1.13 | ColumnudafoTcpThirdRemTmout | read-write | obsolete | Time out reply of the third remote host. Units: seconds. Range: (0..100). Default value: 5 |
| 1.3.6.1.4.1.2007.4.54.1.1.1.14 | ColumnudafoTcpSendAck | read-write | obsolete | Enable Send ACK to HOST. Default value: 1 (NO) |
| 1.3.6.1.4.1.2007.4.54.1.2 | TableudafoTrmtpTable | not-accessible | obsolete | Profiles table for TRMTP connections. |
| 1.3.6.1.4.1.2007.4.54.1.2.1 | RowudafoTrmtpEntry | not-accessible | obsolete | Each register is a profile with its parameters. |
| 1.3.6.1.4.1.2007.4.54.1.2.1.1 | ColumnudafoTrmtpIndex | read-only | obsolete | Table index and number of TRMTP profile. |
| 1.3.6.1.4.1.2007.4.54.1.2.1.2 | ColumnudafoTrmtpCommmand | read-write | obsolete | Command field to add or delete TCP profiles. (1) ok, if last operation was correct. (just in get process.) (2) add, (just in set process.) (3) delete, (just in… |
| 1.3.6.1.4.1.2007.4.54.1.2.1.3 | ColumnudafoTrmtpName | read-write | obsolete | TRMTP profile name. (Up to 15 characters.) Default value: NULL |
| 1.3.6.1.4.1.2007.4.54.1.2.1.4 | ColumnudafoTrmtpNri | read-write | obsolete | Called Net Address. (Up to 15 digits. X character is also valid.) Default value: XXXXXXXXXXXXXXX |
| 1.3.6.1.4.1.2007.4.54.1.2.1.5 | ColumnudafoTrmtpPrincIpAddr | read-write | obsolete | Ip address of the first remote host.(Up to 25 characters.) Default value: 0.0.0.0 |
| 1.3.6.1.4.1.2007.4.54.1.2.1.6 | ColumnudafoTrmtpPrincRemPort | read-write | obsolete | Port of the first remote host. Range: (0..65535) Default value: 20001 |
| 1.3.6.1.4.1.2007.4.54.1.2.1.7 | ColumnudafoTrmtpPrincN2 | read-write | obsolete | Maximum number of retransmisions for the first remote host. Range: (0..65535) Default value: 3 |
| 1.3.6.1.4.1.2007.4.54.1.2.1.8 | ColumnudafoTrmtpPrincT1 | read-write | obsolete | Acknowledge waiting time before retransmition for the first remote host. Units: seconds Range: (1..65535) Default value: 5 |
| 1.3.6.1.4.1.2007.4.54.1.2.1.9 | ColumnudafoTrmtpPrincT2 | read-write | obsolete | Waiting time before getting out of an error state in the transmiter for the first remote host. Units: seconds Range (1..65535) Default value: 50 |
| 1.3.6.1.4.1.2007.4.54.1.2.1.10 | ColumnudafoTrmtpPrincT3 | read-write | obsolete | Inactivity time before getting out of the DATA state in the transmiter for the first remote host. Units: seconds Range: (1..65535) Default value: 45 |
| 1.3.6.1.4.1.2007.4.54.1.2.1.11 | ColumnudafoTrmtpPrincT4 | read-write | obsolete | Inactivity time (in seconds) before returning to OFF state in the receiver for the first remote host. Units: seconds Range: (1..65535) Default value: 100 |
| 1.3.6.1.4.1.2007.4.54.1.2.1.12 | ColumnudafoTrmtpSecIpAddr | read-write | obsolete | Ip address of the second remote host. Default value: 0.0.0.0 |
| 1.3.6.1.4.1.2007.4.54.1.2.1.13 | ColumnudafoTrmtpSecRemPort | read-write | obsolete | Port of the second remote host. Range: (0..65535) Default value: 20001 |
| 1.3.6.1.4.1.2007.4.54.1.2.1.14 | ColumnudafoTrmtpSecN2 | read-write | obsolete | Maximum number of retransmisions for the second remote host. Range: (0..65535) Default value: 3 |
| 1.3.6.1.4.1.2007.4.54.1.2.1.15 | ColumnudafoTrmtpSecT1 | read-write | obsolete | Acknowledge waiting time before retransmition for the second remote host. Units: seconds Range: (1..65535) Default value: 5 |
| 1.3.6.1.4.1.2007.4.54.1.2.1.16 | ColumnudafoTrmtpSecT2 | read-write | obsolete | Waiting time before getting out of an error state in the transmiter for the second remote host. Units: seconds Range: (1..65535) Default value: 50 |
| 1.3.6.1.4.1.2007.4.54.1.2.1.17 | ColumnudafoTrmtpSecT3 | read-write | obsolete | Inactivity time before getting out of the DATA state in the transmiter for the second remote host. Units: seconds Range: (0..65535) Default value: 45 |
| 1.3.6.1.4.1.2007.4.54.1.2.1.18 | ColumnudafoTrmtpSecT4 | read-write | obsolete | Inactivity time before returning to OFF state in the receiver for the second remote host. Units: seconds Range: (1..65535) Default value: 100 |
| 1.3.6.1.4.1.2007.4.54.1.2.1.19 | ColumnudafoTrmtpThirdIpAddr | read-write | obsolete | Ip address of the third remote host. Default value: 0.0.0.0 |
| 1.3.6.1.4.1.2007.4.54.1.2.1.20 | ColumnudafoTrmtpThirdRemPort | read-write | obsolete | Port of the third remote host. Range: (0..65535) Default value: 20001 |
| 1.3.6.1.4.1.2007.4.54.1.2.1.21 | ColumnudafoTrmtpThirdN2 | read-write | obsolete | Maximum number of retransmisions for the third remote host. Range: (0..65535) Default value: 3 |
| 1.3.6.1.4.1.2007.4.54.1.2.1.22 | ColumnudafoTrmtpThirdT1 | read-write | obsolete | Ackknowledge waiting time before retransmition for the third remote host. Units: seconds Range: (1..65535) Default value: 5 |
| 1.3.6.1.4.1.2007.4.54.1.2.1.23 | ColumnudafoTrmtpThirdT2 | read-write | obsolete | Waiting time before getting out of an error state in the transmiter for the third remote host. Units: seconds Range: (1..65535) Default value: 50 |
| 1.3.6.1.4.1.2007.4.54.1.2.1.24 | ColumnudafoTrmtpThirdT3 | read-write | obsolete | Inactivity time before getting out of the DATA state in the transmiter for the third remote host. Units: seconds Range: (1..65535) Default value: 45 |
| 1.3.6.1.4.1.2007.4.54.1.2.1.25 | ColumnudafoTrmtpThirdT4 | read-write | obsolete | Inactivity time before returning to OFF state in the receiver for the third remote host. Units: seconds Range: (1..65535) Default value: 100 |
| 1.3.6.1.4.1.2007.4.54.1.3 | TableudafoIfcTable | not-accessible | obsolete | Table of parameters for udafo interfaces. |
| 1.3.6.1.4.1.2007.4.54.1.3.1 | RowudafoIfcEntry | not-accessible | obsolete | Each register contains the general parameters for each udafo interface. Maximum 4 interfaces. |
| 1.3.6.1.4.1.2007.4.54.1.3.1.1 | ColumnudafoIfcIndex | read-only | obsolete | Table index and number of udafo interface. |
| 1.3.6.1.4.1.2007.4.54.1.3.1.2 | ColumnudafoIfcSpeed | read-write | obsolete | Transmision speed. Units: bits per second. Range: (300..64000) Default value: 2400 |
| 1.3.6.1.4.1.2007.4.54.1.3.1.3 | ColumnudafoIfcProtocol | read-write | obsolete | Protocol for transmision. DOV(1), DAT(2), VISANET(3), TRANSPARENT(4), 7COMM(5), X28P(6). |
| 1.3.6.1.4.1.2007.4.54.1.3.1.4 | ColumnudafoIfcTraMode | read-write | obsolete | Transmision mode: TCP(1), TRMTP(2), AUTO(3) |
| 1.3.6.1.4.1.2007.4.54.1.3.1.5 | ColumnudafoIfcLocIpAddr | read-write | obsolete | Ip address of first remote host. Note: If trmtp mode is selected in this interface, ip address has no meaning,showing default value. In this situation the set … |
| 1.3.6.1.4.1.2007.4.54.1.3.1.6 | ColumnudafoIfcLocUdpPort | read-write | obsolete | Local Udp port. Note: If tcp mode is selected in this interface, Upd port has no meaning, showing default value. In this situation the set command is disabled.… |
| 1.3.6.1.4.1.2007.4.54.1.3.1.7 | ColumnudafoIfcUnderlying | read-write | obsolete | The underlying of UDAFO can be WAN or UART Default value: UART |
| 1.3.6.1.4.1.2007.4.54.1.3.1.8 | ColumnudafoIfcIdentifier | read-write | obsolete | The Terminal number. Default value: 1 |
| 1.3.6.1.4.1.2007.4.54.1.3.1.9 | ColumnudafoIfcSigIfcCtrl | read-write | obsolete | Enable serial line signal control (DTR). Default value: 1 (NO) |
| 1.3.6.1.4.1.2007.4.54.1.3.1.10 | ColumnudafoIfcResponTime | read-write | obsolete | Response Time. When send a message, wait time for response from HOST or POS. (Some protocols used only) Range: (2..600) Default value: 20 |
| 1.3.6.1.4.1.2007.4.54.1.4 | NodeudafoCnfgMisc | |||
| 1.3.6.1.4.1.2007.4.54.1.4.1 | ScalarudafoMiscDisServ | read-write | obsolete | Disable UDAFO service. Default value: 1 (NO DISABLED) |
| 1.3.6.1.4.1.2007.4.54.2 | Nodeudafomon | |||
| 1.3.6.1.4.1.2007.4.54.2.1 | TableudafoTransaOkTable | not-accessible | mandatory | Table of the last successful transactions done with the datafono interface. |
| 1.3.6.1.4.1.2007.4.54.2.1.1 | RowudafoTransaOkEntry | not-accessible | mandatory | Each register represents a transaction, giving its type, Ip address, Nri, net, date and time. |
| 1.3.6.1.4.1.2007.4.54.2.1.1.1 | ColumnudafoTransaOkIndex | read-only | mandatory | Table index and number of transaction. |
| 1.3.6.1.4.1.2007.4.54.2.1.1.2 | ColumnudafoTransaOkType | read-only | mandatory | Type of transaction. authorization or purchase (0) repayment (1) repetition (2) enquiry (3) close (4) account_entity selection (5) operation details (6) accoun… |
| 1.3.6.1.4.1.2007.4.54.2.1.1.3 | ColumnudafoTransaOkIpAddr | read-only | mandatory | Host Ip address. |
| 1.3.6.1.4.1.2007.4.54.2.1.1.4 | ColumnudafoTransaOkNri | read-only | mandatory | Called Net Address. |
| 1.3.6.1.4.1.2007.4.54.2.1.1.5 | ColumnudafoTransaOkStartTime | read-only | mandatory | Start time of the operation. |
| 1.3.6.1.4.1.2007.4.54.2.1.1.6 | ColumnudafoTransaOkEndTime | read-only | mandatory | End time of the operation. |
| 1.3.6.1.4.1.2007.4.54.2.1.1.7 | ColumnudafoTransaOkDate | read-only | mandatory | Date of the transaction. |
| 1.3.6.1.4.1.2007.4.54.2.1.1.8 | ColumnudafoTransaOkNet | read-only | mandatory | Number of net responsible for the transaction. |
| 1.3.6.1.4.1.2007.4.54.2.2 | TableudafoTransaWrongTable | not-accessible | mandatory | Table of the last wrong transactions done with the datafono interface. |
| 1.3.6.1.4.1.2007.4.54.2.2.1 | RowudafoTransaWrongEntry | not-accessible | mandatory | Each register represents a transaction, giving its type, Ip address, cause of failure, Nri, net, date and time. |
| 1.3.6.1.4.1.2007.4.54.2.2.1.1 | ColumnudafoTransaWroIndex | read-only | mandatory | Table index and number of transaction. |
| 1.3.6.1.4.1.2007.4.54.2.2.1.2 | ColumnudafoTransaWroType | read-only | mandatory | Type of transaction. authorization or purchase (0) repayment (1) repetition (2) enquiry (3) close (4) account_entity selection (5) operation details (6) accoun… |
| 1.3.6.1.4.1.2007.4.54.2.2.1.3 | ColumnudafoTransaWroIpAddr | read-only | mandatory | Host Ip address. |
| 1.3.6.1.4.1.2007.4.54.2.2.1.4 | ColumnudafoTransaWroNri | read-only | mandatory | Called Net Address. |
| 1.3.6.1.4.1.2007.4.54.2.2.1.5 | ColumnudafoTransaWroCause | read-only | mandatory | Cause of failure in connection: 1.- The NRI send by datafono doesn�t match with any configured profile. 2.- Disconnection received from DEP 3.- EOT received … |
| 1.3.6.1.4.1.2007.4.54.2.2.1.6 | ColumnudafoTransaWroStartTime | read-only | mandatory | Start time of operation. |
| 1.3.6.1.4.1.2007.4.54.2.2.1.7 | ColumnudafoTransaWroEndTime | read-only | mandatory | End time of operation. |
| 1.3.6.1.4.1.2007.4.54.2.2.1.8 | ColumnudafoTransaWroDate | read-only | mandatory | Date of the transaction. |
| 1.3.6.1.4.1.2007.4.54.2.2.1.9 | ColumnudafoTransaWroNet | read-only | mandatory | Number of net responsible for the transaction. |
| 1.3.6.1.4.1.2007.4.54.2.3 | TableudafoblockTable | not-accessible | mandatory | This table is a sequence of data blocks that contain the fornightly statistics. |
| 1.3.6.1.4.1.2007.4.54.2.3.1 | RowudafoblockEntry | not-accessible | mandatory | Each entry is a data block. The size of each block is 1025 bytes, except for the last, that would be less. |
| 1.3.6.1.4.1.2007.4.54.2.3.1.1 | ColumnudafoblkIndex | read-only | mandatory | This is the index of the table. |
| 1.3.6.1.4.1.2007.4.54.2.3.1.2 | ColumnudafoblkData | read-only | mandatory | Block data. For the last block, the size of the data block would be less than 1024. |
| 1.3.6.1.4.1.2007.4.54.2.4 | ScalarudafoTransaOkDelete | read-write | mandatory | Command field to clear ALL statistics of this table. clear(1), (just in set process) ok(2), if last operation was correct (just in get process) error(3), if la… |
| 1.3.6.1.4.1.2007.4.54.2.5 | ScalarudafoTransaWrongDelete | read-write | mandatory | Command field to clear ALL statistics of this table. clear(1), (just in set process) ok(2), if last operation was correct (just in get process) error(3), if la… |