TELDAT-CFG-PROTOCOL-GW104-MIB
32 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2007.4.1.1.5.14 | NodetelProdNpConfProtGW104 | |||
| 1.3.6.1.4.1.2007.4.1.1.5.14.1 | NodetelProdNpGW104Global | |||
| 1.3.6.1.4.1.2007.4.1.1.5.14.1.1 | ScalartelProdNpGW104GloEnable | read-write | mandatory | Enables Gateway IEC-104/101 operation. |
| 1.3.6.1.4.1.2007.4.1.1.5.14.1.2 | ScalartelProdNpGW104Glo101-On | read-write | mandatory | Enables IEC-101 operation regardless IEC-104 agents status. |
| 1.3.6.1.4.1.2007.4.1.1.5.14.1.3 | ScalartelProdNpGW104Glo104-On | read-write | mandatory | Enables IEC-104 agents operation regardless IEC-101 interfaces status. |
| 1.3.6.1.4.1.2007.4.1.1.5.14.1.4 | ScalartelProdNpGW104GloASDUComAddr | read-write | mandatory | Set ASDU Common Address field value. |
| 1.3.6.1.4.1.2007.4.1.1.5.14.1.5 | ScalartelProdNpGW104GloASDUComAddrSz | read-write | mandatory | Set ASDU Common Address field size. |
| 1.3.6.1.4.1.2007.4.1.1.5.14.1.6 | ScalartelProdNpGW104GloCauseTransfSz | read-write | mandatory | Set Cause of Transfer field size. |
| 1.3.6.1.4.1.2007.4.1.1.5.14.1.7 | ScalartelProdNpGW104GloInfoObjAddrSz | read-write | mandatory | Set Information Object Address field size. |
| 1.3.6.1.4.1.2007.4.1.1.5.14.1.8 | ScalartelProdNpGW104GloIoa10000 | read-write | mandatory | Enable use of IOA 10000. |
| 1.3.6.1.4.1.2007.4.1.1.5.14.1.9 | ScalartelProdNpGW104GloIoa10007 | read-write | mandatory | Enable use of IOA 10007. |
| 1.3.6.1.4.1.2007.4.1.1.5.14.1.10 | ScalartelProdNpGW104GloOrigFilter | read-write | mandatory | Enable originator address filter for messages received from Control Center . |
| 1.3.6.1.4.1.2007.4.1.1.5.14.2 | TabletelProdNpGW104AgentTable | not-accessible | mandatory | Agents list. The table index is the Agent position. |
| 1.3.6.1.4.1.2007.4.1.1.5.14.2.1 | RowtelProdNpGW104AgentEntry | not-accessible | mandatory | Each entry consists in an IEC-104 Agent. Each entry contains the corresponding IEC-104 agent configuration. |
| 1.3.6.1.4.1.2007.4.1.1.5.14.2.1.1 | ColumntelProdNpGW104AgentIndex | read-only | mandatory | IEC-104 agent position in the table. |
| 1.3.6.1.4.1.2007.4.1.1.5.14.2.1.2 | ColumntelProdNpGW104AgentStatus | read-write | mandatory | Table control variable. Set to 1 does nothing. Set to 2 adds a new row (IEC-104 Agent) in the table with default values and returns 2. If it already exists, th… |
| 1.3.6.1.4.1.2007.4.1.1.5.14.2.1.3 | ColumntelProdNpGW104AgentName | read-write | mandatory | IEC-104 agent name. Agents names must be different, can not be repeated. If name already exists, then it returns error. |
| 1.3.6.1.4.1.2007.4.1.1.5.14.2.1.4 | ColumntelProdNpGW104AgentAlarmBuf | read-write | mandatory | Alarm buffer queue length. |
| 1.3.6.1.4.1.2007.4.1.1.5.14.2.1.5 | ColumntelProdNpGW104AgentK | read-write | mandatory | Max. number of IEC-104 send messages without confirmation. |
| 1.3.6.1.4.1.2007.4.1.1.5.14.2.1.6 | ColumntelProdNpGW104AgentLocTcpPort | read-write | mandatory | Local TCP port for IEC-104 agent listen. |
| 1.3.6.1.4.1.2007.4.1.1.5.14.2.1.7 | ColumntelProdNpGW104AgentT0 | read-write | mandatory | T0 defined by IEC-104, establish connection timeout. Value indicates in seconds. |
| 1.3.6.1.4.1.2007.4.1.1.5.14.2.1.8 | ColumntelProdNpGW104AgentT1 | read-write | mandatory | T1 defined by IEC-104, SEND or TEST APDU type timeout. Value indicates in seconds. |
| 1.3.6.1.4.1.2007.4.1.1.5.14.2.1.9 | ColumntelProdNpGW104AgentT2 | read-write | mandatory | T2 defined by IEC-104, data message confirmation timeout. Value indicates in seconds. |
| 1.3.6.1.4.1.2007.4.1.1.5.14.2.1.10 | ColumntelProdNpGW104AgentT3 | read-write | mandatory | T3 defined by IEC-104, sending S message timeout on long inactivity periods. Value indicates in seconds. |
| 1.3.6.1.4.1.2007.4.1.1.5.14.2.1.11 | ColumntelProdNpGW104AgentW | read-write | mandatory | Max. number of IEC-104 received messages confirmed. |
| 1.3.6.1.4.1.2007.4.1.1.5.14.2.1.12 | ColumntelProdNpGW104AgentVrf | read-write | mandatory | VRF name. If VRF is configured on router, can be asociate in agent. Return error if VRF name don't exist. |
| 1.3.6.1.4.1.2007.4.1.1.5.14.3 | TabletelProdNpGW104AgentCcIpTable | not-accessible | mandatory | Agents list. The table index is the Agent position. |
| 1.3.6.1.4.1.2007.4.1.1.5.14.3.1 | RowtelProdNpGW104AgentCcIpEntry | not-accessible | mandatory | Each entry contains a Control Center IP address for an IEC-104 Agent. First index indicates IEC-104 Agent this value must correspond with same in Agent global … |
| 1.3.6.1.4.1.2007.4.1.1.5.14.3.1.1 | ColumntelProdNpGW104AgentCcIpAgIndex | read-only | mandatory | IEC-104 agent position index, must be the same that agents table. |
| 1.3.6.1.4.1.2007.4.1.1.5.14.3.1.2 | ColumntelProdNpGW104AgentCcIpIndex | read-only | mandatory | Control Center IP address position in the table. |
| 1.3.6.1.4.1.2007.4.1.1.5.14.3.1.3 | ColumntelProdNpGW104AgentCcIpStatus | read-write | mandatory | Table control variable. Set to 1 does nothing. Set to 2 deletes corresponding Control Center IP address to that Agent. Get returns 1 if the control exists. It … |
| 1.3.6.1.4.1.2007.4.1.1.5.14.3.1.4 | ColumntelProdNpGW104AgentCcIpAddr | read-write | mandatory | Control Center IP address for IEC-104 agents filter. Adding a new IP address, that don't exist in the table, create a new row in the table. |