TELDAT-CFG-PROTOCOL-IP-MIB
62 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2007.4.1.1.5.1 | NodetelProdNpConfProtIP | |||
| 1.3.6.1.4.1.2007.4.1.1.5.1.1 | NodetelProdNpIPGloGroup | |||
| 1.3.6.1.4.1.2007.4.1.1.5.1.1.1 | ScalartelProdNpIPGloDirIPInternal | read-write | mandatory | Internal IP address of the packets. |
| 1.3.6.1.4.1.2007.4.1.1.5.1.1.2 | ScalartelProdNpIPGloRouterID | read-write | mandatory | IP address with which router is identified. |
| 1.3.6.1.4.1.2007.4.1.1.5.1.1.3 | ScalartelProdNpIPGloSizeRoutingTable | read-write | mandatory | Maximum routing table size. 0 = unlimited. 64..1000000000 = routing table size limit. Default value is 0 (unlimited). |
| 1.3.6.1.4.1.2007.4.1.1.5.1.1.4 | ScalartelProdNpIPGloSizeBuffReassembly | read-write | mandatory | Reassembly buffer size. Default value is 12000 |
| 1.3.6.1.4.1.2007.4.1.1.5.1.1.5 | ScalartelProdNpIPGloSizeRoutingCache | read-write | mandatory | Router cache size. Default value is 64. |
| 1.3.6.1.4.1.2007.4.1.1.5.1.1.6 | ScalartelProdNpIPGloDirectBroadcast | read-write | mandatory | Direct broadcast activation. Default value of the device is yes(1). |
| 1.3.6.1.4.1.2007.4.1.1.5.1.1.7 | ScalartelProdNpIPGloMultiwayPaquet | read-write | mandatory | Multipath activation: (1) Per packet multipath, round-robin strategy. (2) Multipath dissabled. (3) Per source and destination multipath (session). (4) Per pack… |
| 1.3.6.1.4.1.2007.4.1.1.5.1.1.8 | ScalartelProdNpIPGloHabAccessControl | read-write | mandatory | Access controls activation. If they are disabled, telProdNpIPCtrlTable table does not exist. Default value of the device is NO(2). |
| 1.3.6.1.4.1.2007.4.1.1.5.1.1.9 | ScalartelProdNpIPDelAllDir | read-write | mandatory | This variable deletes all rows of the IP addresses table (telProdNpIPDirTable). |
| 1.3.6.1.4.1.2007.4.1.1.5.1.1.10 | ScalartelProdNpIPDelAllRut | read-write | mandatory | This variable deletes all rows of the IP routes table (telProdNpIPRutTable). |
| 1.3.6.1.4.1.2007.4.1.1.5.1.1.11 | ScalartelProdNpIPDelAllFil | read-write | mandatory | This variable deletes all rows of the filters table (telProdNpIPFilTable). |
| 1.3.6.1.4.1.2007.4.1.1.5.1.1.12 | ScalartelProdNpIPDelAllCtl | read-write | mandatory | This variable deletes all rows of the access-controls table (telProdNpIPCtrlTable). |
| 1.3.6.1.4.1.2007.4.1.1.5.1.1.15 | ScalartelProdNpIPGloHabIPClassless | read-write | mandatory | This variable allows enabling IP Classless. Default value of the device is NO(2). |
| 1.3.6.1.4.1.2007.4.1.1.5.1.1.16 | ScalartelProdNpIPGloDirIPManagement | read-write | mandatory | Management IP address for traps. |
| 1.3.6.1.4.1.2007.4.1.1.5.1.2 | TabletelProdNpIPDirTable | not-accessible | mandatory | Addresses list. There are two table indexes: the interface and the IP address index. |
| 1.3.6.1.4.1.2007.4.1.1.5.1.2.1 | RowtelProdNpIPDirEntry | not-accessible | mandatory | Each entry consists of the addresses, the interface number (first address), the IP address index (second index), the table control variable, the IP address, th… |
| 1.3.6.1.4.1.2007.4.1.1.5.1.2.1.1 | ColumntelProdNpIPDirInterfazIndex | read-only | mandatory | Interface number associated to that IP address. It is the first table index. The interfaces of the ROUTER part (from the first (LAN) till Router->Node) are the… |
| 1.3.6.1.4.1.2007.4.1.1.5.1.2.1.2 | ColumntelProdNpIPDirIndex | read-only | mandatory | Entry number of the IP address. It is the second table index. |
| 1.3.6.1.4.1.2007.4.1.1.5.1.2.1.3 | ColumntelProdNpIPDirStatus | read-write | mandatory | Table control variable. Set to 1 does nothing. Set to 2 adds a new row (IP address) in the table with the default values, and returns 2. If it already existed,… |
| 1.3.6.1.4.1.2007.4.1.1.5.1.2.1.4 | ColumntelProdNpIPDirIP | read-write | mandatory | IP address of this entry. If it is the first interface (number 1, LAN), default value is 0.0.0.0. If it is another interface, default value is 0.0.0.(interface… |
| 1.3.6.1.4.1.2007.4.1.1.5.1.2.1.5 | ColumntelProdNpIPDirMascara | read-write | mandatory | Mask associated to this IP address. If it is realized a SET to this variable, and the associate IP address has the first byte to zero, then the mask can only b… |
| 1.3.6.1.4.1.2007.4.1.1.5.1.2.1.6 | ColumntelProdNpIPDirBroadcastType | read-write | mandatory | Broadcast type. Default value is net (1). |
| 1.3.6.1.4.1.2007.4.1.1.5.1.2.1.7 | ColumntelProdNpIPDirBroadcastRell | read-write | mandatory | Broadcast stuffing. Value 0 shows that it is stuffed with zeros. Value 1 shows that it is stuffed with zeros. Default value is 0. |
| 1.3.6.1.4.1.2007.4.1.1.5.1.4 | TabletelProdNpIPRutTable | not-accessible | mandatory | Routes list. The table index is the route position. |
| 1.3.6.1.4.1.2007.4.1.1.5.1.4.1 | RowtelProdNpIPRutEntry | not-accessible | mandatory | Each entry consists of the routes, the route number (table index), the table control variable, the ending IP address, the mask associated to that IP address, t… |
| 1.3.6.1.4.1.2007.4.1.1.5.1.4.1.1 | ColumntelProdNpIPRutIndex | read-only | mandatory | It is the route position in the table. |
| 1.3.6.1.4.1.2007.4.1.1.5.1.4.1.2 | ColumntelProdNpIPRutStatus | read-write | mandatory | Table control variable. Set to 1 does nothing. Set to 2 adds a new row (route) in the table with the default values and returns 2. If it already existed, then … |
| 1.3.6.1.4.1.2007.4.1.1.5.1.4.1.3 | ColumntelProdNpIPRutDirIPFinal | read-write | mandatory | Destination IP address. If address is repeated, then it retuns error (it must be repeated the IP address and the corresponding mask.) Default value is 0.0.0.0. |
| 1.3.6.1.4.1.2007.4.1.1.5.1.4.1.4 | ColumntelProdNpIPRutMascara | read-write | mandatory | Mask associated to this IP address. If the mask is repeated, then it returns error (it must be repeated the IP address and the corresponding mask.) Default val… |
| 1.3.6.1.4.1.2007.4.1.1.5.1.4.1.5 | ColumntelProdNpIPRutDirIPNext | read-write | mandatory | IP address of the next hop. Default value is 0.0.0.0. |
| 1.3.6.1.4.1.2007.4.1.1.5.1.4.1.6 | ColumntelProdNpIPRutCost | read-write | mandatory | Hops cost. Default value is 1. |
| 1.3.6.1.4.1.2007.4.1.1.5.1.5 | TabletelProdNpIPCtrlTable | not-accessible | mandatory | Access control list. The table index is the access control position. |
| 1.3.6.1.4.1.2007.4.1.1.5.1.5.1 | RowtelProdNpIPCtrlEntry | not-accessible | mandatory | Each entry consists of the access controls information: the access control number (table index), the table control variable, the priority, the access type, the… |
| 1.3.6.1.4.1.2007.4.1.1.5.1.5.1.1 | ColumntelProdNpIPCtrlIndex | read-only | mandatory | It is the access control position in the table. |
| 1.3.6.1.4.1.2007.4.1.1.5.1.5.1.2 | ColumntelProdNpIPCtrlStatus | read-write | mandatory | Table control variable. Set to 1 does nothing. Set to 2 adds a new row (access control) in the table with the default values and returns 2. If it already exist… |
| 1.3.6.1.4.1.2007.4.1.1.5.1.5.1.3 | ColumntelProdNpIPCtrlPriority | read-write | mandatory | Access control priority. It coincides with its position in the table. Default value is 1. When realizing a set, the position behind which the access control wi… |
| 1.3.6.1.4.1.2007.4.1.1.5.1.5.1.4 | ColumntelProdNpIPCtrlAccessType | read-write | mandatory | Access control type. Default value is 1 (inclusive). |
| 1.3.6.1.4.1.2007.4.1.1.5.1.5.1.5 | ColumntelProdNpIPCtrlDirIPOrigin | read-write | mandatory | Source IP address. Default value is 0.0.0.0. If the address is repeated, then it returns error. |
| 1.3.6.1.4.1.2007.4.1.1.5.1.5.1.6 | ColumntelProdNpIPCtrlMasIPOrigin | read-write | mandatory | Mask associated to source IP address. If this condition is not fulfilled, SourceIPAddress & (~(SourceMask) )=0, then the mask is inconsistent. Default value is… |
| 1.3.6.1.4.1.2007.4.1.1.5.1.5.1.7 | ColumntelProdNpIPCtrlDirIPFinal | read-write | mandatory | Destination IP address. Default value is 0.0.0.0. If the address is repeated, then it returns error. |
| 1.3.6.1.4.1.2007.4.1.1.5.1.5.1.8 | ColumntelProdNpIPCtrlMasIPFinal | read-write | mandatory | Mask associated to destination IP address. If this condition is not fulfilled, DestinationIPAddress & (~(DestinationMask) )=0, then the mask is inconsistent. D… |
| 1.3.6.1.4.1.2007.4.1.1.5.1.5.1.9 | ColumntelProdNpIPCtrlProtStart | read-write | mandatory | Starting protocol. If it is tried to introduce a value higher than telProdNpIPCtrlProtEnd, then it returns error. Default value is 0. |
| 1.3.6.1.4.1.2007.4.1.1.5.1.5.1.10 | ColumntelProdNpIPCtrlProtEnd | read-write | mandatory | Ending protocol. If it is tried to introduce a value lower than telProdNpIPCtrlProtStart, then it returns error. Default value is 255. |
| 1.3.6.1.4.1.2007.4.1.1.5.1.5.1.11 | ColumntelProdNpIPCtrlPortStart | read-write | mandatory | Starting destination port for UDP or TCP protocol and starting code for ICMP protocol. If it is tried to introduce a value higher than telProdNpIPCtrlPortEnd, … |
| 1.3.6.1.4.1.2007.4.1.1.5.1.5.1.12 | ColumntelProdNpIPCtrlPortEnd | read-write | mandatory | Ending destination port for UDP or TCP protocol and ending code for ICMP protocol. If it is tried to introduce a value lower than telProdNpIPCtrlPortStart, the… |
| 1.3.6.1.4.1.2007.4.1.1.5.1.5.1.13 | ColumntelProdNpIPCtrlSrcPortStart | read-write | mandatory | Starting source port for UDP or TCP protocol and starting type for ICMP protocol. If it is tried to introduce a value higher than telProdNpIPCtrlSrcPortEnd, th… |
| 1.3.6.1.4.1.2007.4.1.1.5.1.5.1.14 | ColumntelProdNpIPCtrlSrcPortEnd | read-write | mandatory | Ending source port for UDP or TCP protocol and endng type for ICMP protocol. If it is tried to introduce a value lower than telProdNpIPCtrlSrcPortStart, then i… |
| 1.3.6.1.4.1.2007.4.1.1.5.1.6 | TabletelProdNpIPFilTable | not-accessible | mandatory | Filters list. The table index is the filter position. |
| 1.3.6.1.4.1.2007.4.1.1.5.1.6.1 | RowtelProdNpIPFilEntry | not-accessible | mandatory | Each entry consists of the filters, the filter number (table index), the table control variable, the destination IP address and the mask associated to that IP … |
| 1.3.6.1.4.1.2007.4.1.1.5.1.6.1.1 | ColumntelProdNpIPFilIndex | read-only | mandatory | It is the filter position in the table. |
| 1.3.6.1.4.1.2007.4.1.1.5.1.6.1.2 | ColumntelProdNpIPFilStatus | read-write | mandatory | Table control variable. Set to 1 does nothing. Set to 2 adds a new row (filter) in the table with the default values and returns 2. If it already existed, then… |
| 1.3.6.1.4.1.2007.4.1.1.5.1.6.1.3 | ColumntelProdNpIPFilDirIPFinal | read-write | mandatory | Destination IP address. Default value is 0.0.0.0. If address is repeated, then it retuns error (it must be repeated the IP address and the corresponding mask). |
| 1.3.6.1.4.1.2007.4.1.1.5.1.6.1.4 | ColumntelProdNpIPFilMasIPNet | read-write | mandatory | Mask associated to this IP address. If mask is repeated, then it retuns error (it must be repeated the IP address and the corresponding mask). Default value is… |
| 1.3.6.1.4.1.2007.4.1.1.5.1.8 | TabletelProdNpIPAggRutTable | not-accessible | mandatory | Aggregation routes table. The table index is the route position. |
| 1.3.6.1.4.1.2007.4.1.1.5.1.8.1 | RowtelProdNpIPAggRutEntry | not-accessible | mandatory | Each entry consists of the routes, the route number (table index), the table control variable, the ending IP address, the mask associated to that IP address an… |
| 1.3.6.1.4.1.2007.4.1.1.5.1.8.1.1 | ColumntelProdNpIPAggRutIndex | read-only | mandatory | It is the route position in the table. |
| 1.3.6.1.4.1.2007.4.1.1.5.1.8.1.2 | ColumntelProdNpIPAggRutStatus | read-write | mandatory | Table control variable. Set to 1 does nothing. Set to 2 deletes that route. Get returns 1 if the route exists. |
| 1.3.6.1.4.1.2007.4.1.1.5.1.8.1.3 | ColumntelProdNpIPAggRutDirIPFinal | read-write | mandatory | Destination IP address. To introduce a new aggregation route, a SET operation must be carried out, giving this variable a certain value (IP address). The index… |
| 1.3.6.1.4.1.2007.4.1.1.5.1.8.1.4 | ColumntelProdNpIPAggRutMascara | read-write | mandatory | Mask associated to this IP address. To introduce a new aggregation route, a SET operation must be carried out, giving this variable a certain value (mask). The… |
| 1.3.6.1.4.1.2007.4.1.1.5.1.8.1.5 | ColumntelProdNpIPAggRutCost | read-only | mandatory | Hops cost. Default value is 1. |