TELDAT-CFG-PROTOCOL-SNMP-MIB
40 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2007.4.1.1.5.4 | NodetelProdNpConfProtSNMP | |||
| 1.3.6.1.4.1.2007.4.1.1.5.4.1 | NodetelProdNpSNMPGloGroup | |||
| 1.3.6.1.4.1.2007.4.1.1.5.4.1.1 | ScalartelProdNpSNMPGloHabSnmp | read-write | mandatory | This variables allows enabling / disabling SNMP. Default value is 2(no), disabled. |
| 1.3.6.1.4.1.2007.4.1.1.5.4.1.2 | ScalartelProdNpSNMPGloHabDefect | read-write | mandatory | This variable enables SNMP default configuration. Default value is 1(yes), enabled. |
| 1.3.6.1.4.1.2007.4.1.1.5.4.1.3 | ScalartelProdNpSNMPGloConfPort | read-write | mandatory | This variable configures traps port. Default value is 162. |
| 1.3.6.1.4.1.2007.4.1.1.5.4.1.4 | ScalartelProdNpSNMPGloMaxTimeTrapPend | read-write | mandatory | Maximum time of pending traps sending. Default value is 50. |
| 1.3.6.1.4.1.2007.4.1.1.5.4.1.5 | ScalartelProdNpSNMPGloMaxNumTrapPend | read-write | mandatory | Maximum number of traps pending of sending. Default value is 32. |
| 1.3.6.1.4.1.2007.4.1.1.5.4.1.6 | ScalartelProdNpSNMPGloMaxDestTrap | read-write | mandatory | Maximum number of traps destinations. Default value is 4. |
| 1.3.6.1.4.1.2007.4.1.1.5.4.1.7 | ScalartelProdNpSNMPGloCheckDest | read-write | mandatory | This variable is used to enable/disable the reachability checking for the manager stations configured as trap destinations before sending. If this parameter is… |
| 1.3.6.1.4.1.2007.4.1.1.5.4.2 | TabletelProdNpSNMPCommunityTable | not-accessible | mandatory | Communities list. The table index is the community number. |
| 1.3.6.1.4.1.2007.4.1.1.5.4.2.1 | RowtelProdNpSNMPCommunityEntry | not-accessible | mandatory | Each entry consists of the communities, the community number (table index), the variable to add a table row, the variable to delete a table row, the access typ… |
| 1.3.6.1.4.1.2007.4.1.1.5.4.2.1.1 | ColumntelProdNpSNMPComIndex | read-only | mandatory | Snmp community number. It is the table index. |
| 1.3.6.1.4.1.2007.4.1.1.5.4.2.1.2 | ColumntelProdNpSNMPComCreate | read-write | mandatory | Variable to add a table row. To add a snmp community, it is necessary to realize a set and pass the name of the new community. If it is repeated, then it will … |
| 1.3.6.1.4.1.2007.4.1.1.5.4.2.1.3 | ColumntelProdNpSNMPComDelete | read-write | mandatory | Variable to delete a table row. To delete a snmp community, a set to 1 must be realized. Get returns 2 if the last set was realized succesfully; 3 if it result… |
| 1.3.6.1.4.1.2007.4.1.1.5.4.2.1.4 | ColumntelProdNpSNMPComName | read-write | mandatory | Community name; maximum: 32 characters. |
| 1.3.6.1.4.1.2007.4.1.1.5.4.2.1.5 | ColumntelProdNpSNMPComAccess | read-write | mandatory | Access type for the community: 1 allows reading, writing and the reception of traps; 2, reading and traps; 3, only traps. Default value is 2 (READ-TRAP). |
| 1.3.6.1.4.1.2007.4.1.1.5.4.2.1.6 | ColumntelProdNpSNMPComHabTrapAll | read-write | mandatory | This variable allows enabling/disabling all traps. It only allows set to 1 (all traps) and 2 (none). Its value affects to the variables of the individual traps… |
| 1.3.6.1.4.1.2007.4.1.1.5.4.2.1.7 | ColumntelProdNpSNMPComHabTrapColdStart | read-write | mandatory | This variable allows enabling/disabling Cold Start traps. Default value is 2(no), disabled. |
| 1.3.6.1.4.1.2007.4.1.1.5.4.2.1.8 | ColumntelProdNpSNMPComHabTrapWarmStart | read-write | mandatory | This variable allows enabling/disabling Warm Start traps. Default value is 2(no), disabled. |
| 1.3.6.1.4.1.2007.4.1.1.5.4.2.1.9 | ColumntelProdNpSNMPComHabTrapLinkDown | read-write | mandatory | This variable allows enabling/disabling Link Down traps. Default value is 2(no), disabled. |
| 1.3.6.1.4.1.2007.4.1.1.5.4.2.1.10 | ColumntelProdNpSNMPComHabTrapLinkUp | read-write | mandatory | This variable allows enabling/disabling Link Up traps. Default value is 2(no), disabled. |
| 1.3.6.1.4.1.2007.4.1.1.5.4.2.1.11 | ColumntelProdNpSNMPComHabTrapAuthFail | read-write | mandatory | This variable allows enabling/disabling authentication failure traps. Default value is 2(no), disabled. |
| 1.3.6.1.4.1.2007.4.1.1.5.4.2.1.12 | ColumntelProdNpSNMPComHabTrapEnt | read-write | mandatory | This variable allows enabling/disabling private traps (enterprise). Default value is 2(no), disabled. |
| 1.3.6.1.4.1.2007.4.1.1.5.4.2.1.13 | ColumntelProdNpSNMPComView | read-write | mandatory | View name. Maximum: 32 characters. Existing views can only be assigned to the community. Default value is all. |
| 1.3.6.1.4.1.2007.4.1.1.5.4.3 | TabletelProdNpSNMPDirTable | not-accessible | mandatory | List of the IP addresses associated to a community. There are two indexes: the community and the IP address position. |
| 1.3.6.1.4.1.2007.4.1.1.5.4.3.1 | RowtelProdNpSNMPDirEntry | not-accessible | mandatory | Each entry consists of the IP addresses, the community number (first index), the IP address index (second index), the table control variable, the community nam… |
| 1.3.6.1.4.1.2007.4.1.1.5.4.3.1.1 | ColumntelProdNpSNMPDirComIndex | read-only | mandatory | Community number associated to the IP address. It is the first table index. |
| 1.3.6.1.4.1.2007.4.1.1.5.4.3.1.2 | ColumntelProdNpSNMPDirDirIndex | read-only | mandatory | Entry number of the IP address. It is the second table index. |
| 1.3.6.1.4.1.2007.4.1.1.5.4.3.1.3 | ColumntelProdNpSNMPDirStatus | read-write | mandatory | Table control variable. Set to 1 does nothing. Set to 2 adds a new row (address) in the table with the default values and returns 2. If it already existed, the… |
| 1.3.6.1.4.1.2007.4.1.1.5.4.3.1.4 | ColumntelProdNpSNMPDirComName | read-only | mandatory | Community name. Maximum: 32 characters. |
| 1.3.6.1.4.1.2007.4.1.1.5.4.3.1.5 | ColumntelProdNpSNMPDirIP | read-write | mandatory | IP address of this entry. Default value is 0.0.0.0. If a new row for a community is requested to which a row with the default values has already been assigned … |
| 1.3.6.1.4.1.2007.4.1.1.5.4.3.1.6 | ColumntelProdNpSNMPDirMask | read-write | mandatory | Mask associated to this IP address. Default value is 255.0.0.0 |
| 1.3.6.1.4.1.2007.4.1.1.5.4.4 | TabletelProdNpSNMPSubTable | not-accessible | mandatory | Subbranches list. There are two indixes: the view and the subbranch. |
| 1.3.6.1.4.1.2007.4.1.1.5.4.4.1 | RowtelProdNpSNMPSubEntry | not-accessible | mandatory | Each entry consists of the subbranches, the associated view number (first index), the subbranch number (second index), a variable to add a new row, a variable … |
| 1.3.6.1.4.1.2007.4.1.1.5.4.4.1.1 | ColumntelProdNpSNMPSubViewIndex | read-only | mandatory | View number associated to the IP address. It is the first table index. |
| 1.3.6.1.4.1.2007.4.1.1.5.4.4.1.2 | ColumntelProdNpSNMPSubSubtreeIndex | read-only | mandatory | Subbranch number. It is the second table index. |
| 1.3.6.1.4.1.2007.4.1.1.5.4.4.1.3 | ColumntelProdNpSNMPSubCreate | read-write | mandatory | This variable allows adding a new table row. To add a subbranch, and give the name of the new subbranch. If it is repeated (there already is a view with an equ… |
| 1.3.6.1.4.1.2007.4.1.1.5.4.4.1.4 | ColumntelProdNpSNMPSubDel | read-write | mandatory | This variable allows deleting a table row. To add a subbranch, a set to 1 must be done. Get returns 2 if the last set was realized, 3 if it was wrong and 4 in … |
| 1.3.6.1.4.1.2007.4.1.1.5.4.4.1.5 | ColumntelProdNpSNMPSubNameView | read-write | mandatory | View name. Maximum: 32 characters. If it is tried to give a view name that it already exists, and in addition it already has an equal associate subbranch, then… |
| 1.3.6.1.4.1.2007.4.1.1.5.4.4.1.6 | ColumntelProdNpSNMPSuboID | read-write | mandatory | Subbranch identifier. Default value is 0.0. If it is tried to add a subbranch with the default oID to a view in which that default oID already exists, then the… |