TELDAT-MON-FEATURES-NSM-MIB
241 objects
This module defines a MIB for Round Trip Time (RTT) monitoring of a list of targets, using a variety of protocols: MIB for management of Teldat feature Network Service Monitor. The table structure overview is as follows (t: indicates a table, at: indicates an augmented table, and it: indicates table with the same indices/control as parent table): NSM MIB | | | | | | | | |t | | | | | | | | |it- Echo Specific Configuration | | |at- Schedule Configuration | | |at- Monitoring Operational State | | |at- Last RTT operation | | | |t | | | |it- Statistics Collection Table | |it- Statistics Totals Table | |t | |t | | | | | |t | |t DEFINITIONS: conceptual RTT control row - This is a row in the 'Overall Control Group'. This row is indexed via the teldatNsmCtrlAdminIndex object. This row is spread across multiple real tables in the 'Overall Control Group'. probe - This is the entity that executes via a conceptual RTT control row and populates a conceptual statistics row. Rtt operation - This is a single operation performed by a probe. This operation can be a single Rtt attempt/completion or a group of Rtt attempts/completions that produce one operation table entry. ARR Protocol Definition: The format of the RTT Asymmetric Request/Responses (ARR) protocol is as follows: The ARR Header (total of 12 octets): 4 octet -> eyecatcher: 'WxYz' 1 octet -> version : 0x01 - protocol version 1 octet -> command : 0x01 - logoff request 0x02 - echo request 0x03 - echo response 0x04 - software version request 0x05 - software version response 2 octet -> sequence number (Network Byte Order) 4 octet -> response data size (Network Byte Order) The ARR Data: n octets -> request/response data: 'AB..ZAB..ZAB..' For software version request/response the protocol version octet will contain the version number of the responder. Thus the sequence number, etc will not be included. The response data should be appended to the origin request data. This allows data verification to check the data that flows in both directions. If the response data size is smaller than the request data size the original request data will be truncated. An example would be: Request: / Response: 'WxYz' / 'WxYz' 0x01 / 0x01 0x02 / 0x03 0x0001 / 0x0001 0x00000008 / 0x00000008 'ABCDEF' / 'ABCDEFGH' NOTE: We requested 8 bytes in the response and the response had 8 bytes. The size of the request data has no correlation to the size of the response data. NOTE: For native RTT request/response (i.e. ipIcmpecho) operations both the 'Header' and 'Data' will be included. Only the 'sequence number' in the Header will be valid. NOTE: For non-connection oriented protocol the initial RTT request/response operation will be preceded with an RTT request/response operation to the target address to force path exploration and to prove connectivity. Statistics capture table will omit these responses to prevent skewed results.
Imported Objects
| IF-MIB | OwnerString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION TimeInterval TimeStamp TruthValue |
| TELDAT-SW-STRUCTURE-MIB | telProdNpMonFeatures |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2007.4.1.2.4.6 | IdentityteldatNsmMonMIB | This module defines a MIB for Round Trip Time (RTT) monitoring of a list of targets, using a variety of protocols: MIB for management of Teldat feature Network… | ||
| 1.3.6.1.4.1.2007.4.1.2.4.6.1 | NodeteldatNsmObjects | |||
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.1 | NodeteldatNsmAppl | |||
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.1.1 | ScalarteldatNsmApplVersion | read-only | current | Network Service Monitor (or RTT Teldat) application version string. The format will be: 'Version.Release.Patch-Level: Textual-Description' For example: '1.0.0:… |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.1.4 | ScalarteldatNsmApplNumCtrlAdminEntry | read-only | current | This object defines the maximum number of entries that can be added to the teldatNsmCtrlAdminTable. It is a fixed value: 32. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.2 | NodeteldatNsmCtrl | |||
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.2.1 | TableteldatNsmCtrlAdminTable | not-accessible | current | A table of NSM Round Trip Time (RTT) monitoring definitions. The NSM administration control is in multiple tables. This first table, is used to create a concep… |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.2.1.1 | RowteldatNsmCtrlAdminEntry | not-accessible | current | A base list of objects that define a conceptual RTT control row. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.2.1.1.1 | ColumnteldatNsmCtrlAdminIndex | not-accessible | current | Uniquely identifies a row in the teldatNsmCtrlAdminTable. This is a pseudo-random number selected by the management station when creating a row via the teldatN… |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.2.1.1.2 | ColumnteldatNsmCtrlAdminOwner | read-create | current | Identifies the entity that created this table row. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.2.1.1.3 | ColumnteldatNsmCtrlAdminTag | read-create | current | A string which is used by a managing application to identify the RTT target. This string could be inserted into trap notifications, but has no other significan… |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.2.1.1.4 | ColumnteldatNsmCtrlAdminRttType | read-create | current | The type of NSM operation to be performed. This value must be set in the same PDU or before setting any type specific configuration. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.2.1.1.5 | ColumnteldatNsmCtrlAdminThreshold | read-create | current | This object defines an administrative threshold limit. If the RTT operation time exceeds this limit, the variables teldatNsmCtrlOperOverThresholdOccurred, teld… |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.2.1.1.6 | ColumnteldatNsmCtrlAdminFrequency | read-create | current | Specifies the duration between initiating each RTT operation. This object cannot be set to a value which would be a shorter duration than teldatNsmCtrlAdminTim… |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.2.1.1.7 | ColumnteldatNsmCtrlAdminTimeout | read-create | current | Specifies the duration to wait for a RTT operation completion. The value of this object cannot be set to a value which would specify a duration exceeding telda… |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.2.1.1.8 | ColumnteldatNsmCtrlAdminVerifyData | read-create | current | When set to true, the resulting data in each RTT operation is compared with the expected data. This includes checking header information (if possible) and exac… |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.2.1.1.9 | ColumnteldatNsmCtrlAdminStatus | read-create | current | The status of the conceptual RTT control row. In order for this object to become active, the following row objects must be defined: - teldatNsmCtrlAdminRttType… |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.2.1.1.10 | ColumnteldatNsmCtrlAdminNvgen | read-create | current | When set to true, this entry will be shown in 'list config' command and can be saved into Non-volatile memory. This variable is not supported at the moment and… |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.2.2 | TableteldatNsmEchoAdminTable | not-accessible | current | A table that contains NSM Round Trip Time (RTT) specific definitions. This table is controlled via the teldatNsmCtrlAdminTable. Entries in this table are creat… |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.2.2.1 | RowteldatNsmEchoAdminEntry | not-accessible | current | A list of objects that define specific configuration for NsmRttType conceptual RTT control rows. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.2.2.1.1 | ColumnteldatNsmEchoAdminProtocol | read-create | current | Specifies the protocol to be used to perform the NSM RTT operation. The following list defines what protocol should be used for each probe type: echo - ipIcmpE… |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.2.2.1.2 | ColumnteldatNsmEchoAdminTargetAddress | read-create | current | A string which specifies the address of the target. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.2.2.1.3 | ColumnteldatNsmEchoAdminPktDataRequestSize | read-create | current | This object is used in echo (ipIcmpecho) and jitter probes, and its value represents the native payload size. REMEMBER: The ARR Header overhead is not included… |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.2.2.1.4 | ColumnteldatNsmEchoAdminPktDataResponseSize | read-create | current | This object is not supported by protocols allowed at this moment. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.2.2.1.5 | ColumnteldatNsmEchoAdminTargetPort | read-create | current | This object represents the target's port number. This object is applicable to jitter probes. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.2.2.1.6 | ColumnteldatNsmEchoAdminSourceAddress | read-create | current | A string which specifies the IP address of the source. This object is applicable to all supported probes. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.2.2.1.7 | ColumnteldatNsmEchoAdminSourcePort | read-create | current | This object represents the source's port number. If this object is not specified, the application will get a port allocated by the system. This object is appli… |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.2.2.1.8 | ColumnteldatNsmEchoAdminControlEnable | read-create | current | If this object is enabled, then NSM application will send control messages to a responder, residing on the target router to respond to the data request packets… |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.2.2.1.9 | ColumnteldatNsmEchoAdminTOS | read-create | current | This object represents the type of service octet in an IP header. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.2.2.1.10 | ColumnteldatNsmEchoAdminLSREnable | read-only | current | If this object is enabled then it means that the application calculates response time for a specific path. This object is applicable to echo probe only, but it… |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.2.2.1.11 | ColumnteldatNsmEchoAdminTargetAddressString | read-create | current | A string which specifies the address of the target. This string can be in IP address format or a hostname. This object is not applicable to supported probes. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.2.2.1.12 | ColumnteldatNsmEchoAdminNameServer | read-create | current | A string which specifies the IP address of the name-server. This object is not applicable to supported probes. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.2.2.1.13 | ColumnteldatNsmEchoAdminOperation | read-create | current | A code that represents the specific type of RTT operation. This object is applicable to http probe only. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.2.2.1.14 | ColumnteldatNsmEchoAdminHTTPVersion | read-create | current | A string which specifies the version number of the HTTP Server. The syntax for the version string is <major number>.<minor number> An example would be 1.0, 1.1… |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.2.2.1.15 | ColumnteldatNsmEchoAdminURL | read-create | current | A string which represents the URL to which a HTTP probe should communicate with. This object is applicable to http probe only. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.2.2.1.16 | ColumnteldatNsmEchoAdminCache | read-create | current | If this object is false then it means that HTTP request should not download cached pages. This means that the request should be forwarded to the origin server.… |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.2.2.1.17 | ColumnteldatNsmEchoAdminInterval | read-create | current | This value represents the inter-packet delay between packets and is in milliseconds. This object is applicable to jitter probe only. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.2.2.1.18 | ColumnteldatNsmEchoAdminNumPackets | read-create | current | This value represents the number of packets that need to be transmitted. This value is currently used for Jitter probe. This object is applicable to jitter pro… |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.2.2.1.19 | ColumnteldatNsmEchoAdminProxy | read-create | current | This string represents the proxy server information. This object is applicable to http probe only, but it is not supported by the application at the moment. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.2.2.1.20 | ColumnteldatNsmEchoAdminString1 | read-create | current | This string stores the content of HTTP raw request. If the request cannot fit into String1 then it should be split and put in Strings 1 through 5. This object … |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.2.2.1.21 | ColumnteldatNsmEchoAdminString2 | read-create | current | This string stores the content of HTTP raw request. teldatNsmEchoAdminString1-5 are concatenated to form the HTTP raw request used in the RTT operation. This o… |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.2.2.1.22 | ColumnteldatNsmEchoAdminString3 | read-create | current | This string stores the content of HTTP raw request. teldatNsmEchoAdminString1-5 are concatenated to form the HTTP raw request used in the RTT operation. This o… |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.2.2.1.23 | ColumnteldatNsmEchoAdminString4 | read-create | current | This string stores the content of HTTP raw request. teldatNsmEchoAdminString1-5 are concatenated to form the HTTP raw request used in the RTT operation. This o… |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.2.2.1.24 | ColumnteldatNsmEchoAdminString5 | read-create | current | This string stores the content of HTTP raw request. teldatNsmEchoAdminString1-5 are concatenated to form the HTTP raw request used in the RTT operation. This o… |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.2.2.1.25 | ColumnteldatNsmEchoAdminMode | read-create | current | A code that represents the specific type of RTT operation. This object is not applicable to supported probes, and will always take the value 'ftpPassive'. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.2.5 | TableteldatNsmScheduleAdminTable | not-accessible | current | A table of NSM Round Trip Time (RTT) monitoring scheduling specific definitions. This table is controlled via the teldatNsmCtrlAdminTable. Entries in this tabl… |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.2.5.1 | RowteldatNsmScheduleAdminEntry | not-accessible | current | A list of objects that define specific configuration for the scheduling of NSM RTT operations. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.2.5.1.1 | ColumnteldatNsmScheduleAdminRttLife | read-create | current | This object value will be placed into the teldatNsmCtrlOperRttLife object when the teldatNsmCtrlOperState object transitions to 'active' or 'pending'. The valu… |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.2.5.1.2 | ColumnteldatNsmScheduleAdminRttStartTime | read-create | current | This is the time when this conceptional row will activate. This is the value of MIB-II's sysUpTime in the future. When sysUpTime equals this value this object … |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.2.5.1.3 | ColumnteldatNsmScheduleAdminConceptRowAgeout | read-create | current | The amount of time this conceptual Rtt control row will exist when not in an 'active' teldatNsmCtrlOperState. When this conceptual Rtt control row enters an 'a… |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.2.9 | TableteldatNsmCtrlOperTable | not-accessible | current | A table of which contains the Operational values for the probe, and the conceptual RTT control row. This table augments the teldatNsmCtrlAdminTable. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.2.9.1 | RowteldatNsmCtrlOperEntry | not-accessible | current | A list of objects that describe the current state of probe, and the conceptual RTT control row. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.2.9.1.1 | ColumnteldatNsmCtrlOperModificationTime | read-only | current | This object is updated whenever an object in the conceptual RTT control row is changed or updated. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.2.9.1.2 | ColumnteldatNsmCtrlOperDiagText | read-only | current | A string which can be used as an aid in tracing problems. The content of this field will depend on the type of target (teldatNsmEchoAdminProtocol). For all pro… |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.2.9.1.3 | ColumnteldatNsmCtrlOperResetTime | read-only | current | This object is set when the teldatNsmCtrlOperState is set to reset. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.2.9.1.4 | ColumnteldatNsmCtrlOperOctetsInUse | read-only | current | This object is the number of octets currently in use by this composite conceptual RTT row. A composite conceptual row include the control and statistics concep… |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.2.9.1.5 | ColumnteldatNsmCtrlOperConnectionLostOccurred | read-only | current | This object will only change its value when the NsmRttType is 'echo'. This object is set to true when the RTT connection fails to be established or is lost, an… |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.2.9.1.6 | ColumnteldatNsmCtrlOperTimeoutOccurred | read-only | current | This object will change its value for all NsmRttTypes. This object is set to true when an operation times out, and set to false when an operation completes und… |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.2.9.1.7 | ColumnteldatNsmCtrlOperOverThresholdOccurred | read-only | current | This object will change its value for all NsmRttTypes. This object is changed by operation completion times over threshold. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.2.9.1.8 | ColumnteldatNsmCtrlOperNumRtts | read-only | current | This is the total number of probe operations that have been attempted. This value is incremented for each start of an RTT operation. This object has the specia… |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.2.9.1.9 | ColumnteldatNsmCtrlOperRttLife | read-only | current | This object is decremented every second, until it reaches zero. When the value of this object is zero RTT operations for this row are suspended. This object wi… |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.2.9.1.10 | ColumnteldatNsmCtrlOperState | read-write | current | The RttMonOperStatus object is used to manage the 'state' of the probe that is implementing this conceptual RTT control row. This status object has six defined… |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.2.10 | TableteldatNsmLatestRttOperTable | not-accessible | current | A table of which contains the status of latest RTT (NSM) operation. This table augments the RTT definition table, teldatNsmCtrlAdminTable. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.2.10.1 | RowteldatNsmLatestRttOperEntry | not-accessible | current | A list of objects that record the latest RTT (NSM) operation. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.2.10.1.1 | ColumnteldatNsmLatestRttOperCompletionTime | read-only | current | The completion time of the latest RTT (NSM) operation successfully completed. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.2.10.1.2 | ColumnteldatNsmLatestRttOperSense | read-only | current | A sense code for the completion status of the latest RTT (NSM) operation. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.2.10.1.3 | ColumnteldatNsmLatestRttOperApplSpecificSense | read-only | current | An application specific sense code for the completion status of the latest RTT operation. This object will only be valid when the teldatNsmLatestRttOperSense o… |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.2.10.1.4 | ColumnteldatNsmLatestRttOperSenseDescription | read-only | current | A sense description for the completion status of the latest RTT (NSM) operation when the teldatNsmLatestRttOperSense object is set to 'applicationSpecific'. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.2.10.1.5 | ColumnteldatNsmLatestRttOperTime | read-only | current | The value of the agent system time at the time of the latest RTT (NSM) operation. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.2.10.1.6 | ColumnteldatNsmLatestRttOperAddress | read-only | current | This is a string which specifies the address of the target for this RTT (NSM) operation. This address will be just the teldatNsmEchoAdminTargetAddress address.… |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3 | NodeteldatNsmStats | |||
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.1 | TableteldatNsmStatsCaptureTable | not-accessible | current | The statistics capture database. The statistics capture table contains summarized information of the results for a conceptual RTT control row. A rolling accumu… |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.1.1 | RowteldatNsmStatsCaptureEntry | not-accessible | current | A list of objects which accumulate the results of a series of RTT operations over a 60 minute time period. The statistics capture table is a rollover table. Wh… |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.1.1.1 | ColumnteldatNsmStatsCaptureStartTimeIndex | not-accessible | current | The time when this row was created. This object is the second index of the teldatNsmStatsCaptureTable Table. When the number of teldatNsmStatsCaptureStartTimeI… |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.1.1.2 | ColumnteldatNsmStatsCapturePathIndex | not-accessible | current | For all supported values of NsmRttType, this object will be one: only one path will be contained in each hourly 'group'. For a particular value of teldatNsmSta… |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.1.1.3 | ColumnteldatNsmStatsCaptureHopIndex | not-accessible | current | For all supported values of NsmRttType, this object will be one: only one hop will be contained in each path (i.e., one hop in each hourly 'group'). For a part… |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.1.1.4 | ColumnteldatNsmStatsCaptureDistIndex | not-accessible | current | This object uniquely defines a statistical distribution bucket for a given value of teldatNsmStatsCaptureHopIndex. In current implementation only one statistic… |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.1.1.5 | ColumnteldatNsmStatsCaptureCompletions | read-only | current | The number of RTT (NSM) operations that have completed without an error and without timing out. This object has the special behavior as defined by the ROLLOVER… |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.1.1.6 | ColumnteldatNsmStatsCaptureOverThresholds | read-only | current | The number of RTT (NSM) operations successfully completed, but in excess of teldatNsmCtrlAdminThreshold. This number is a subset of the accumulation of all tel… |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.1.1.7 | ColumnteldatNsmStatsCaptureSumCompletionTime | read-only | current | The accumulated completion time of RTT (NSM) operations which complete successfully. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.1.1.8 | ColumnteldatNsmStatsCaptureSumCompletionTime2Low | read-only | current | The low order 32 bits of the accumulated squares of completion times (in milliseconds) of RTT (NSM) operations which complete successfully. Low/High order is d… |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.1.1.9 | ColumnteldatNsmStatsCaptureSumCompletionTime2High | read-only | current | The high order 32 bits of the accumulated squares of completion times (in milliseconds) of RTT (NSM) operations which complete successfully. See the teldatNsmS… |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.1.1.10 | ColumnteldatNsmStatsCaptureCompletionTimeMax | read-only | current | The maximum completion time of any RTT (NSM) operation which completes successfully. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.1.1.11 | ColumnteldatNsmStatsCaptureCompletionTimeMin | read-only | current | The minimum completion time of any RTT (NSM) operation which completes successfully. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.2 | TableteldatNsmStatsCollectTable | not-accessible | current | The statistics collection database. This table has the exact same behavior as the teldatNsmStatsCaptureTable, except it does not keep statistical distribution … |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.2.1 | RowteldatNsmStatsCollectEntry | not-accessible | current | A list of objects which accumulate the results of a series of RTT (NSM) operations over a 60 minute time period. This entry has the exact same behavior as the … |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.2.1.1 | ColumnteldatNsmStatsCollectNumDisconnects | read-only | current | When the NsmRttType is 'echo', this object represents the number of times that the target became disconnected. For all other values of NsmRttType, this object … |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.2.1.2 | ColumnteldatNsmStatsCollectTimeouts | read-only | current | The number of occasions when a RTT (NSM) operation was not completed before a timeout occurred, i.e. teldatNsmCtrlAdminTimeout was exceeded. Since the RTT oper… |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.2.1.3 | ColumnteldatNsmStatsCollectBusies | read-only | current | The number of occasions when a RTT (NSM) operation could not be initiated because a previous RTT (NSM) operation has not been completed. When the initiation of… |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.2.1.4 | ColumnteldatNsmStatsCollectNoConnections | read-only | current | When the NsmRttType is 'echo' this is the number of occasions when a RTT (NSM) operation could not be initiated because the connection to the target has not be… |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.2.1.5 | ColumnteldatNsmStatsCollectDrops | read-only | current | The number of occasions when a RTT (NSM) operation could not be initiated because some necessary internal resource (for example memory) was not available, or t… |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.2.1.6 | ColumnteldatNsmStatsCollectSequenceErrors | read-only | current | When the NsmRttType is 'echo' this is the number of RTT (NSM) operation completions received with an unexpected sequence identifier. For all other values of Ns… |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.2.1.7 | ColumnteldatNsmStatsCollectVerifyErrors | read-only | current | The number of RTT (NSM) operation completions received with data that does not compare with the expected data. The completion time of these operations are not … |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.2.1.8 | ColumnteldatNsmStatsCollectAddress | read-only | current | This object is a string which specifies the address of the target for the RTT (NSM) operation. This address will be just the teldatNsmEchoAdminTargetAddress ad… |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.3 | TableteldatNsmStatsTotalsTable | not-accessible | current | The statistics totals database. This table has the exact same behavior as the teldatNsmStatsCaptureTable, except it only keeps 60 minute group values. For a co… |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.3.1 | RowteldatNsmStatsTotalsEntry | not-accessible | current | A list of objects which accumulate the results of a series of RTT (NSM) operations over a 60 minute time period. This entry has the exact same behavior as the … |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.3.1.1 | ColumnteldatNsmStatsTotalsElapsedTime | read-only | current | The length of time since this conceptual statistics row was created. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.3.1.2 | ColumnteldatNsmStatsTotalsInitiations | read-only | current | The number of RTT (NSM) operations that have been initiated. This number includes all RTT (NSM) operations which succeed or fail for whatever reason. This obje… |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.4 | TableteldatNsmHTTPStatsTable | not-accessible | current | The HTTP statistics collection database. The HTTP statistics table contains summarized information of the results for a conceptual RTT control row. A rolling a… |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.4.1 | RowteldatNsmHTTPStatsEntry | not-accessible | current | A list of objects which accumulate the results of a series of RTT (HTTP) operations over a 60 minute time period. This entry is created only if the teldatNsmCt… |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.4.1.1 | ColumnteldatNsmHTTPStatsStartTimeIndex | not-accessible | current | This is the time when this row was created. This index uniquely identifies a HTTP stats row in the teldatNsmHTTPStatsTable. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.4.1.2 | ColumnteldatNsmHTTPStatsCompletions | read-only | current | The number of HTTP operations that have completed successfully. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.4.1.3 | ColumnteldatNsmHTTPStatsOverThresholds | read-only | current | The number of HTTP operations that violate threshold. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.4.1.4 | ColumnteldatNsmHTTPStatsRTTSum | read-only | current | The sum of HTTP operations that are successfully measured. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.4.1.5 | ColumnteldatNsmHTTPStatsRTTSum2Low | read-only | current | The sum of squares of the RTT's that are successfully measured (low order 32 bits). |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.4.1.6 | ColumnteldatNsmHTTPStatsRTTSum2High | read-only | current | The sum of squares of the RTT's that are successfully measured (high order 32 bits). |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.4.1.7 | ColumnteldatNsmHTTPStatsRTTMin | read-only | current | The minimum RTT taken to perform HTTP operation. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.4.1.8 | ColumnteldatNsmHTTPStatsRTTMax | read-only | current | The minimum RTT taken to perform HTTP operation. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.4.1.9 | ColumnteldatNsmHTTPStatsDNSRTTSum | read-only | current | The sum of RTT taken to perform DNS query within the HTTP operation. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.4.1.10 | ColumnteldatNsmHTTPStatsTCPConnectRTTSum | read-only | current | The sum of RTT taken to connect to the HTTP server. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.4.1.11 | ColumnteldatNsmHTTPStatsTransactionRTTSum | read-only | current | The sum of RTT taken to download the object specified by URL. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.4.1.12 | ColumnteldatNsmHTTPStatsMessageBodyOctetsSum | read-only | current | The sum of the size of the message body received as a response to the HTTP request. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.4.1.13 | ColumnteldatNsmHTTPStatsDNSServerTimeout | read-only | current | The number of requests that could not connect to the DNS Server. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.4.1.14 | ColumnteldatNsmHTTPStatsTCPConnectTimeout | read-only | current | The number of requests that could not connect to the HTTP Server. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.4.1.15 | ColumnteldatNsmHTTPStatsTransactionTimeout | read-only | current | The number of requests that timed out during HTTP transaction. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.4.1.16 | ColumnteldatNsmHTTPStatsDNSQueryError | read-only | current | The number of requests that had DNS Query errors. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.4.1.17 | ColumnteldatNsmHTTPStatsHTTPError | read-only | current | The number of requests that had HTTP errors while downloading the base page. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.4.1.18 | ColumnteldatNsmHTTPStatsError | read-only | current | The number of occasions when a HTTP operation could not be initiated because an internal error. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.4.1.19 | ColumnteldatNsmHTTPStatsBusies | read-only | current | The number of occasions when an HTTP operation could not be initiated because a previous HTTP operation has not been completed. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.5 | TableteldatNsmJitterStatsTable | not-accessible | current | The Jitter statistics collection database. The Jitter statistics table contains summarized information of the results for a conceptual RTT control row. A rolli… |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.5.1 | RowteldatNsmJitterStatsEntry | not-accessible | current | A list of objects which accumulate the results of a series of RTT (Jitter) operations over a 60 minute time period. This entry is created only if the teldatNsm… |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.5.1.1 | ColumnteldatNsmJitterStatsStartTimeIndex | not-accessible | current | The time when this row was created. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.5.1.2 | ColumnteldatNsmJitterStatsCompletions | read-only | current | The number of jitter operation that have completed successfully. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.5.1.3 | ColumnteldatNsmJitterStatsOverThresholds | read-only | current | The number of jitter operations that violate threshold. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.5.1.4 | ColumnteldatNsmJitterStatsNumOfRTT | read-only | current | The number of RTT's that are successfully measured. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.5.1.5 | ColumnteldatNsmJitterStatsRTTSum | read-only | current | The sum of RTT's that are successfully measured. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.5.1.6 | ColumnteldatNsmJitterStatsRTTSum2Low | read-only | current | The sum of squares of RTT's that are successfully measured (low order 32 bits). |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.5.1.7 | ColumnteldatNsmJitterStatsRTTSum2High | read-only | current | The sum of squares of RTT's that are successfully measured (high order 32 bits). |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.5.1.8 | ColumnteldatNsmJitterStatsRTTMin | read-only | current | The minimum of RTT's that were successfully measured. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.5.1.9 | ColumnteldatNsmJitterStatsRTTMax | read-only | current | The maximum of RTT's that were successfully measured. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.5.1.10 | ColumnteldatNsmJitterStatsMinOfPositivesSD | read-only | current | The minimum of absolute values of all positive jitter values from packets sent from source to destination. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.5.1.11 | ColumnteldatNsmJitterStatsMaxOfPositivesSD | read-only | current | The maximum of absolute values of all positive jitter values from packets sent from source to destination. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.5.1.12 | ColumnteldatNsmJitterStatsNumOfPositivesSD | read-only | current | The sum of number of all positive jitter values from packets sent from source to destination. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.5.1.13 | ColumnteldatNsmJitterStatsSumOfPositivesSD | read-only | current | The sum of all positive jitter values from packets sent from source to destination. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.5.1.14 | ColumnteldatNsmJitterStatsSum2PositivesSDLow | read-only | current | The sum of square of RTT's of all positive jitter values from packets sent from source to destination (low order 32 bits). |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.5.1.15 | ColumnteldatNsmJitterStatsSum2PositivesSDHigh | read-only | current | The sum of square of RTT's of all positive jitter values from packets sent from source to destination (high order 32 bits). |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.5.1.16 | ColumnteldatNsmJitterStatsMinOfNegativesSD | read-only | current | The minimum of all negative jitter values from packets sent from source to destination. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.5.1.17 | ColumnteldatNsmJitterStatsMaxOfNegativesSD | read-only | current | The maximum of all negative jitter values from packets sent from source to destination. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.5.1.18 | ColumnteldatNsmJitterStatsNumOfNegativesSD | read-only | current | The sum of number of all negative jitter values from packets sent from source to destination. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.5.1.19 | ColumnteldatNsmJitterStatsSumOfNegativesSD | read-only | current | The sum of RTT's of all negative jitter values from packets sent from source to destination. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.5.1.20 | ColumnteldatNsmJitterStatsSum2NegativesSDLow | read-only | current | The sum of square of RTT's of all negative jitter values from packets sent from source to destination (low order 32 bits). |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.5.1.21 | ColumnteldatNsmJitterStatsSum2NegativesSDHigh | read-only | current | The sum of square of RTT's of all negative jitter values from packets sent from source to destination (high order 32 bits). |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.5.1.22 | ColumnteldatNsmJitterStatsMinOfPositivesDS | read-only | current | The minimum of all positive jitter values from packets sent from destination to source. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.5.1.23 | ColumnteldatNsmJitterStatsMaxOfPositivesDS | read-only | current | The maximum of all positive jitter values from packets sent from destination to source. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.5.1.24 | ColumnteldatNsmJitterStatsNumOfPositivesDS | read-only | current | The sum of number of all positive jitter values from packets sent from destination to source. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.5.1.25 | ColumnteldatNsmJitterStatsSumOfPositivesDS | read-only | current | The sum of RTT's of all positive jitter values from packets sent from destination to source. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.5.1.26 | ColumnteldatNsmJitterStatsSum2PositivesDSLow | read-only | current | The sum of squares of RTT's of all positive jitter values from packets sent from destination to source (low order 32 bits). |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.5.1.27 | ColumnteldatNsmJitterStatsSum2PositivesDSHigh | read-only | current | The sum of squares of RTT's of all positive jitter values from packets sent from destination to source (high order 32 bits). |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.5.1.28 | ColumnteldatNsmJitterStatsMinOfNegativesDS | read-only | current | The minimum of all negative jitter values from packets sent from destination to source. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.5.1.29 | ColumnteldatNsmJitterStatsMaxOfNegativesDS | read-only | current | The maximum of all negative jitter values from packets sent from destination to source. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.5.1.30 | ColumnteldatNsmJitterStatsNumOfNegativesDS | read-only | current | The sum of number of all negative jitter values from packets sent from destination to source. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.5.1.31 | ColumnteldatNsmJitterStatsSumOfNegativesDS | read-only | current | The sum of RTT's of all negative jitter values from packets sent from destination to source. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.5.1.32 | ColumnteldatNsmJitterStatsSum2NegativesDSLow | read-only | current | The sum of squares of RTT's of all negative jitter values from packets sent from destination to source (low order 32 bits). |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.5.1.33 | ColumnteldatNsmJitterStatsSum2NegativesDSHigh | read-only | current | The sum of squares of RTT's of all negative jitter values from packets sent from destination to source (high order 32 bits). |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.5.1.34 | ColumnteldatNsmJitterStatsPacketLossSD | read-only | current | The number of packets lost when sent from source to destination. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.5.1.35 | ColumnteldatNsmJitterStatsPacketLossDS | read-only | current | The number of packets lost when sent from destination to source. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.5.1.36 | ColumnteldatNsmJitterStatsPacketOutOfSequence | read-only | current | The number of packets arrived out of sequence. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.5.1.37 | ColumnteldatNsmJitterStatsPacketMIA | read-only | current | The number of packets that are lost for which we cannot determine the direction. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.5.1.38 | ColumnteldatNsmJitterStatsPacketLateArrival | read-only | current | The number of packets that arrived after the timeout. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.5.1.39 | ColumnteldatNsmJitterStatsError | read-only | current | The number of occasions when a jitter operation could not be initiated because an internal error. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.5.1.40 | ColumnteldatNsmJitterStatsBusies | read-only | current | The number of occasions when a jitter operation could not be initiated because a previous jitter operation has not been completed. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.5.1.41 | ColumnteldatNsmJitterStatsOWSumSD | read-only | current | The sum of one way times from source to destination. This variable is not supported in current implementation. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.5.1.42 | ColumnteldatNsmJitterStatsOWSum2SDLow | read-only | current | The sum of squares of one way times from source to destination (low order 32 bits). This variable is not supported in current implementation. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.5.1.43 | ColumnteldatNsmJitterStatsOWSum2SDHigh | read-only | current | The sum of squares of one way times from source to destination (high order 32 bits). This variable is not supported in current implementation. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.5.1.44 | ColumnteldatNsmJitterStatsOWMinSD | read-only | current | The minimum of all one way times from source to destination. This variable is not supported in current implementation. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.5.1.45 | ColumnteldatNsmJitterStatsOWMaxSD | read-only | current | The maximum of all one way times from source to destination. This variable is not supported in current implementation. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.5.1.46 | ColumnteldatNsmJitterStatsOWSumDS | read-only | current | The sum of one way times from destination to source. This variable is not supported in current implementation. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.5.1.47 | ColumnteldatNsmJitterStatsOWSum2DSLow | read-only | current | The sum of squares of one way times from destination to source (low order 32 bits). This variable is not supported in current implementation. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.5.1.48 | ColumnteldatNsmJitterStatsOWSum2DSHigh | read-only | current | The sum of squares of one way times from destination to source (high order 32 bits). This variable is not supported in current implementation. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.5.1.49 | ColumnteldatNsmJitterStatsOWMinDS | read-only | current | The minimum of all one way times from destination to source. This variable is not supported in current implementation. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.5.1.50 | ColumnteldatNsmJitterStatsOWMaxDS | read-only | current | The maximum of all one way times from destination to source. This variable is not supported in current implementation. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.3.5.1.51 | ColumnteldatNsmJitterStatsNumOfOW | read-only | current | The number of one way times that are successfully measured. This variable is not supported in current implementation. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.4 | NodeteldatNsmHistory | |||
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.5 | NodeteldatNsmLatestOper | |||
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.5.1 | TableteldatNsmLatestHTTPOperTable | not-accessible | current | A table which contains the status of latest HTTP RTT operation. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.5.1.1 | RowteldatNsmLatestHTTPOperEntry | not-accessible | current | A list of objects that record the latest HTTP RTT operation. This entry is created automatically after the teldatNsmCtrlAdminEntry is created. Also the entry i… |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.5.1.1.1 | ColumnteldatNsmLatestHTTPOperRTT | read-only | current | Round Trip Time taken to perform HTTP operation. This value is the sum of DNSRTT, TCPConnectRTT and TransactionRTT. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.5.1.1.2 | ColumnteldatNsmLatestHTTPOperDNSRTT | read-only | current | Round Trip Time taken to perform DNS query within the HTTP operation. If an IP Address is specified in the URL, then DNSRTT is 0. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.5.1.1.3 | ColumnteldatNsmLatestHTTPOperTCPConnectRTT | read-only | current | Round Trip Time taken to connect to the HTTP server. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.5.1.1.4 | ColumnteldatNsmLatestHTTPOperTransactionRTT | read-only | current | Round Trip Time taken to download the object specified by the URL. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.5.1.1.5 | ColumnteldatNsmLatestHTTPOperMessageBodyOctets | read-only | current | The size of the message body received as a response to the HTTP request. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.5.1.1.6 | ColumnteldatNsmLatestHTTPOperSense | read-only | current | An application specific sense code for the completion status of the latest RTT (NSM HTTP) operation. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.5.1.1.7 | ColumnteldatNsmLatestHTTPErrorSenseDescription | read-only | current | An sense description for the completion status of the latest RTT (NSM HTTP) operation. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.5.2 | TableteldatNsmLatestJitterOperTable | not-accessible | current | A table which contains the status of latest Jitter operation. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.5.2.1 | RowteldatNsmLatestJitterOperEntry | not-accessible | current | A list of objects that record the latest Jitter operation. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.5.2.1.1 | ColumnteldatNsmLatestJitterOperNumOfRTT | read-only | current | The number of RTT's that were successfully measured. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.5.2.1.2 | ColumnteldatNsmLatestJitterOperRTTSum | read-only | current | The sum of Jitter RTT's that are successfully measured. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.5.2.1.3 | ColumnteldatNsmLatestJitterOperRTTSum2 | read-only | current | The sum of squares of RTT's that are successfully measured. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.5.2.1.4 | ColumnteldatNsmLatestJitterOperRTTMin | read-only | current | The minimum of RTT's that were successfully measured. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.5.2.1.5 | ColumnteldatNsmLatestJitterOperRTTMax | read-only | current | The maximum of RTT's that were successfully measured. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.5.2.1.6 | ColumnteldatNsmLatestJitterOperMinOfPositivesSD | read-only | current | The minimum of all positive jitter values from packets sent from source to destination. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.5.2.1.7 | ColumnteldatNsmLatestJitterOperMaxOfPositivesSD | read-only | current | The maximum of all positive jitter values from packets sent from source to destination. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.5.2.1.8 | ColumnteldatNsmLatestJitterOperNumOfPositivesSD | read-only | current | The sum of number of all positive jitter values from packets sent from source to destination. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.5.2.1.9 | ColumnteldatNsmLatestJitterOperSumOfPositivesSD | read-only | current | The sum of RTT's of all positive jitter values from packets sent from source to destination. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.5.2.1.10 | ColumnteldatNsmLatestJitterOperSum2PositivesSD | read-only | current | The sum of square of RTT's of all positive jitter values from packets sent from source to destination. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.5.2.1.11 | ColumnteldatNsmLatestJitterOperMinOfNegativesSD | read-only | current | The minimum of absolute values of all negative jitter values from packets sent from source to destination. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.5.2.1.12 | ColumnteldatNsmLatestJitterOperMaxOfNegativesSD | read-only | current | The maximum of absolute values of all negative jitter values from packets sent from source to destination. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.5.2.1.13 | ColumnteldatNsmLatestJitterOperNumOfNegativesSD | read-only | current | The sum of number of all negative jitter values from packets sent from source to destination. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.5.2.1.14 | ColumnteldatNsmLatestJitterOperSumOfNegativesSD | read-only | current | The sum of all negative jitter values from packets sent from source to destination. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.5.2.1.15 | ColumnteldatNsmLatestJitterOperSum2NegativesSD | read-only | current | The sum of square of RTT's of all negative jitter values from packets sent from source to destination. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.5.2.1.16 | ColumnteldatNsmLatestJitterOperMinOfPositivesDS | read-only | current | The minimum of all positive jitter values from packets sent from destination to source. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.5.2.1.17 | ColumnteldatNsmLatestJitterOperMaxOfPositivesDS | read-only | current | The maximum of all positive jitter values from packets sent from destination to source. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.5.2.1.18 | ColumnteldatNsmLatestJitterOperNumOfPositivesDS | read-only | current | The sum of number of all positive jitter values from packets sent from destination to source. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.5.2.1.19 | ColumnteldatNsmLatestJitterOperSumOfPositivesDS | read-only | current | The sum of RTT's of all positive jitter values from packets sent from destination to source. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.5.2.1.20 | ColumnteldatNsmLatestJitterOperSum2PositivesDS | read-only | current | The sum of squares of RTT's of all positive jitter values from packets sent from destination to source. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.5.2.1.21 | ColumnteldatNsmLatestJitterOperMinOfNegativesDS | read-only | current | The minimum of all negative jitter values from packets sent from destination to source. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.5.2.1.22 | ColumnteldatNsmLatestJitterOperMaxOfNegativesDS | read-only | current | The maximum of all negative jitter values from packets sent from destination to source. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.5.2.1.23 | ColumnteldatNsmLatestJitterOperNumOfNegativesDS | read-only | current | The sum of number of all negative jitter values from packets sent from destination to source. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.5.2.1.24 | ColumnteldatNsmLatestJitterOperSumOfNegativesDS | read-only | current | The sum of RTT's of all negative jitter values from packets sent from destination to source. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.5.2.1.25 | ColumnteldatNsmLatestJitterOperSum2NegativesDS | read-only | current | The sum of squares of RTT's of all negative jitter values from packets sent from destination to source. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.5.2.1.26 | ColumnteldatNsmLatestJitterOperPacketLossSD | read-only | current | The number of packets lost when sent from source to destination. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.5.2.1.27 | ColumnteldatNsmLatestJitterOperPacketLossDS | read-only | current | The number of packets lost when sent from destination to source. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.5.2.1.28 | ColumnteldatNsmLatestJitterOperPacketOutOfSequence | read-only | current | The number of packets arrived out of sequence. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.5.2.1.29 | ColumnteldatNsmLatestJitterOperPacketMIA | read-only | current | The number of packets that are lost for which we cannot determine the direction. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.5.2.1.30 | ColumnteldatNsmLatestJitterOperPacketLateArrival | read-only | current | The number of packets that arrived after the timeout. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.5.2.1.31 | ColumnteldatNsmLatestJitterOperSense | read-only | current | An application specific sense code for the completion status of the latest Jitter RTT operation. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.5.2.1.32 | ColumnteldatNsmLatestJitterErrorSenseDescription | read-only | current | An sense description for the completion status of the latest Jitter RTT operation. It is a zero-length string in current implementation. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.5.2.1.33 | ColumnteldatNsmLatestJitterOperOWSumSD | read-only | current | The sum of one way latency from source to destination. This variable is not supported in current implementation. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.5.2.1.34 | ColumnteldatNsmLatestJitterOperOWSum2SD | read-only | current | The sum of squares of one way latency from source to destination. This variable is not supported in current implementation. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.5.2.1.35 | ColumnteldatNsmLatestJitterOperOWMinSD | read-only | current | The minimum of all one way latency from source to destination. This variable is not supported in current implementation. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.5.2.1.36 | ColumnteldatNsmLatestJitterOperOWMaxSD | read-only | current | The maximum of all one way latency from source to destination. This variable is not supported in current implementation. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.5.2.1.37 | ColumnteldatNsmLatestJitterOperOWSumDS | read-only | current | The sum of one way latency from destination to source. This variable is not supported in current implementation. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.5.2.1.38 | ColumnteldatNsmLatestJitterOperOWSum2DS | read-only | current | The sum of squares of one way latency from destination to source. This variable is not supported in current implementation. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.5.2.1.39 | ColumnteldatNsmLatestJitterOperOWMinDS | read-only | current | The minimum of all one way latency from destination to source. This variable is not supported in current implementation. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.5.2.1.40 | ColumnteldatNsmLatestJitterOperOWMaxDS | read-only | current | The maximum of all one way latency from destination to source. This variable is not supported in current implementation. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.1.5.2.1.41 | ColumnteldatNsmLatestJitterOperNumOfOW | read-only | current | The number of successful one way latency measurements. This variable is not supported in current implementation. |
| 1.3.6.1.4.1.2007.4.1.2.4.6.2 | NodeteldatNsmNotificationsPrefix | |||
| 1.3.6.1.4.1.2007.4.1.2.4.6.2.0 | NodeteldatNsmNotifications | |||
| 1.3.6.1.4.1.2007.4.1.2.4.6.3 | NodeteldatNsmMibConformance | |||
| 1.3.6.1.4.1.2007.4.1.2.4.6.3.1 | NodeteldatNsmMibCompliances | |||
| 1.3.6.1.4.1.2007.4.1.2.4.6.3.1.1 | ComplianceteldatNsmMibComplianceRev1 | current | The compliance statement for new MIB extensions without the obsolete items. | |
| 1.3.6.1.4.1.2007.4.1.2.4.6.3.2 | NodeteldatNsmMibGroups | |||
| 1.3.6.1.4.1.2007.4.1.2.4.6.3.2.1 | GroupteldatNsmApplGroup | current | A collection of objects providing the NSM (RTT) Monitoring Application defaults and global information. This group of information is provided to the agent when… | |
| 1.3.6.1.4.1.2007.4.1.2.4.6.3.2.2 | GroupteldatNsmCtrlGroup | current | A collection of objects providing the Administration, Operational, Last Statistical values for the NSM (RTT) Monitoring Application, a collection of objects th… | |
| 1.3.6.1.4.1.2007.4.1.2.4.6.3.2.3 | GroupteldatNsmStatsGroup | current | A collection of objects providing accumulated statistical history. | |
| 1.3.6.1.4.1.2007.4.1.2.4.6.3.2.4 | GroupteldatNsmLatestOperGroup | current | A collection of objects that were added to store the latest operational results for HTTP and Jitter probes. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| NsmRttOperation | INTEGER { httpGet(1), httpRaw(2), ftpGet(3), ftpPassive(4), ftpActive(5) } | current | The following are specific NSM (RTT) operations for a particular probe type: httpGet(1) - HTTP get request httpRaw(2) - HTTP request with user defined payload ftpGet(3) - FTP get request ftpPassive(4) - FTP passive mode… |
| NsmRttProtocol | INTEGER { notApplicable(1), ipIcmpEcho(2), httpAppl(25), jitterAppl(27) } | current | Specifies the protocol to be used to perform the timed echo request/response. The following protocols are defined: NOTE: All protocols that end in 'Appl' will support the asymetric request/response (ARR) protocol. See t… |
| NsmRttResponseSense | INTEGER { ok(1), disconnected(2), overThreshold(3), timeout(4), busy(5), notConnected(6), dropped(7), sequenceError(8), verifyError(9), applicationSpecific(10), dnsServerTimeout(11), tcpConnectTimeout(12), httpTransactionTimeout(13), dnsQueryError(14), httpError(15), error(16) } | current | These are the defined values for a completion status of a RTT operation. ok(1) - a valid completion occurred and timed successfully disconnected(2) - the operation did not occur because the connection to the target was … |
| NsmRttTargetAddress | OCTET STRING | current | A string which specifies the address of the target for the RTT (NSM) operation; a value of NsmRttTargetAddress which corresponds to a 'broadcast' address is disallowed. The interpretation of this string depends on the t… |
| NsmRttType | INTEGER { echo(1), http(7), jitter(9) } | current | Specifies the type of RTT operation to be performed. The value 'echo' will cause the RTT application to perform a timed echo request/response operation directed at the 'NsmRttTargetAddress'. The value 'http' will cause … |