TELDAT-MON-INTERF-PPP-MIB
300 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2007.4.1.2.2.2.10 | NodetelProdNpMonInterfPPP | |||
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.1 | NodetelProdNpMonIfcPPPLCPGroup | |||
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.1 | TabletelProdNpMonIfcPPPLCPControlGloTable | not-accessible | mandatory | This table contains global LCP parameters. The entry number is determined by the PPP interface number, the lower interface number and the order number of the l… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.1.1 | RowtelProdNpMonIfcPPPLCPControlGloEntry | not-accessible | mandatory | Each entry contains the PPP interface number of the node, the lower interface number, the order number of the link inside the lower interface, a description of… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.1.1.1 | ColumntelProdNpMonIfcPPPLCPCtrlGloPPPIndex | read-only | mandatory | PPP interface number of the node (first index of the entry). |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.1.1.2 | ColumntelProdNpMonIfcPPPLCPCtrlGloLowIndex | read-only | mandatory | Lower interface number of the node (second index of the entry). |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.1.1.3 | ColumntelProdNpMonIfcPPPLCPCtrlGloOrdIndex | read-only | mandatory | Order number of the link inside the lower interface corresponding to the LCP parameters of the entry (third index of the entry). |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.1.1.4 | ColumntelProdNpMonIfcPPPLCPCtrlGloLowDescr | read-only | mandatory | A description of the lower interface corresponding to this entry. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.1.1.5 | ColumntelProdNpMonIfcPPPLCPCtrlGloCircId | read-only | mandatory | Circuit identifier inside the lower interface. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.1.1.6 | ColumntelProdNpMonIfcPPPLCPCtrlGloVersion | read-only | mandatory | Version number. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.1.1.7 | ColumntelProdNpMonIfcPPPLCPCtrlGloState | read-only | mandatory | Current protocol state. The possible values of the variable are integer numbers between 0 and 9. Each number is related to a feasible state: (0) initial, (1) s… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.2 | TabletelProdNpMonIfcPPPLCPControlOptionsTable | not-accessible | mandatory | This table contains variables that give information about the transmitted and received options during the link setup. The entry number is determined by the PPP… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.2.1 | RowtelProdNpMonIfcPPPLCPControlOptionsEntry | not-accessible | mandatory | Each entry contains the PPP interface number, the lower interface number, the order number of the link inside the lower interface, a description of the lower i… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.2.1.1 | ColumntelProdNpMonIfcPPPLCPCtrlOptPPPIndex | read-only | mandatory | PPP interface number of the node (first index of the entry). |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.2.1.2 | ColumntelProdNpMonIfcPPPLCPCtrlOptLowIndex | read-only | mandatory | Lower interface number of the node (second index of the entry). |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.2.1.3 | ColumntelProdNpMonIfcPPPLCPCtrlOptOrdIndex | read-only | mandatory | Order number of the link inside the lower interface corresponding to the LCP parameters of the entry (third index of the entry). |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.2.1.4 | ColumntelProdNpMonIfcPPPLCPCtrlOptLowDescr | read-only | mandatory | A description of the lower interface corresponding to this entry. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.2.1.5 | ColumntelProdNpMonIfcPPPLCPCtrlOptCircId | read-only | mandatory | Circuit identifier inside the lower interface. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.2.1.6 | ColumntelProdNpMonIfcPPPLCPCtrlOptMRULoc | read-only | mandatory | MRU (Maximum Received Unit) in the local end. It represents the PPP frame maximum size that is accepted in reception. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.2.1.7 | ColumntelProdNpMonIfcPPPLCPCtrlOptMRURem | read-only | mandatory | MRU (Maximum Received Unit) in the remote end. It represents the PPP frame maximum size that is accepted in reception. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.2.1.8 | ColumntelProdNpMonIfcPPPLCPCtrlOptAsyCharMaskLoc | read-only | mandatory | Local Asynchronous Control Character Map. It shows the mask to use if transparent transmission is applied over control characters (XON, XOFF) for asynchronous … |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.2.1.9 | ColumntelProdNpMonIfcPPPLCPCtrlOptAsyCharMaskRem | read-only | mandatory | Remote Asynchronous Control Character Map. It shows the mask to use if transparent transmission is applied over control characters (XON, XOFF) for asynchronous… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.2.1.10 | ColumntelProdNpMonIfcPPPLCPCtrlOptAuthLoc | read-only | mandatory | Local authentication type used. Possible options are: PAP (1), CHAP (2), a different one (3) or no authentication used (0). |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.2.1.11 | ColumntelProdNpMonIfcPPPLCPCtrlOptAuthRem | read-only | mandatory | Remote authentication type used. Possible options are: PAP (1), CHAP (2), a different one (3) or no authentication used (0). |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.2.1.12 | ColumntelProdNpMonIfcPPPLCPCtrlOptMagNumLoc | read-only | mandatory | Local magic number. It is useful to determine if there is a loop in the link by transmitting a random number between the ends based on the system clock and the… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.2.1.13 | ColumntelProdNpMonIfcPPPLCPCtrlOptMagNumRem | read-only | mandatory | Remote magic number. It is useful to determine if there is a loop in the link by transmitting a random number between the ends based on the system clock and th… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.2.1.14 | ColumntelProdNpMonIfcPPPLCPCtrlOptProtCmpLoc | read-only | mandatory | This variable indicates if Protocol Field Compression is used at the local end. Possible values are: (1) yes or (2) no. Once LCP has been negotiated and NCP ha… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.2.1.15 | ColumntelProdNpMonIfcPPPLCPCtrlOptProtCmpRem | read-only | mandatory | This variable indicates if Protocol Field Compression is used at the remote end. Possible values are: (0) non negotiated, (1) yes or (2) no. Once LCP has been … |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.2.1.16 | ColumntelProdNpMonIfcPPPLCPCtrlOptAddCmpLoc | read-only | mandatory | This variable indicates if Address/Control Field Compression is used at the local end. Possible values are: (1) yes or (2) no. Once LCP has been negotiated and… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.2.1.17 | ColumntelProdNpMonIfcPPPLCPCtrlOptAddCmpRem | read-only | mandatory | This variable indicates if Address/Control Field Compression is used at the remote end. Possible values are: (0) non negotiated, (1) yes or (2) no. Once LCP ha… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.2.1.18 | ColumntelProdNpMonIfcPPPLCPCtrlOptChecksumLoc | read-only | mandatory | This variable indicates if 32 bits Checksum is used at the local end. Possible values are: (1) yes or (2) no. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.2.1.19 | ColumntelProdNpMonIfcPPPLCPCtrlOptChecksumRem | read-only | mandatory | This variable indicates if 32 bits Checksum is used at the remote end. Possible values are: (1) yes or (2) no. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.3 | TabletelProdNpMonIfcPPPLCPStatsTable | not-accessible | mandatory | This table contains statistics of the LCP protocol. The entry number is determined by the PPP interface number, the lower interface number and the order number… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.3.1 | RowtelProdNpMonIfcPPPLCPStatsEntry | not-accessible | mandatory | Each entry contains the PPP interface number, the lower interface number, the order number of the link inside the lower interface, a description of the lower i… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.3.1.1 | ColumntelProdNpMonIfcPPPLCPStPPPIndex | read-only | mandatory | PPP interface number of the node (first index of the entry). |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.3.1.2 | ColumntelProdNpMonIfcPPPLCPStLowIndex | read-only | mandatory | Lower interface number of the node (second index of the entry). |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.3.1.3 | ColumntelProdNpMonIfcPPPLCPStOrdIndex | read-only | mandatory | Order number of the link inside the lower interface corresponding to the LCP parameters of the entry (third index of the entry). |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.3.1.4 | ColumntelProdNpMonIfcPPPLCPStLowDescr | read-only | mandatory | A description of the lower interface corresponding to this entry. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.3.1.5 | ColumntelProdNpMonIfcPPPLCPStCircId | read-only | mandatory | Circuit identifier inside the lower interface. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.3.1.6 | ColumntelProdNpMonIfcPPPLCPStClear | read-write | mandatory | This variable when is readed shows the output from the last counter restart attempt: the value is 2 (ok) if the restart was performed succesfully, 3 (error) if… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.3.1.7 | ColumntelProdNpMonIfcPPPLCPStFramesRx | read-only | mandatory | Number of frames received through the link shown in the indexes. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.3.1.8 | ColumntelProdNpMonIfcPPPLCPStFramesTx | read-only | mandatory | Number of frames sent through the link shown in the indexes. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.3.1.9 | ColumntelProdNpMonIfcPPPLCPStBytesRx | read-only | mandatory | Number of bytes received through the link shown in the indexes. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.3.1.10 | ColumntelProdNpMonIfcPPPLCPStBytesTx | read-only | mandatory | Number of bytes sent through the link shown in the indexes. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.3.1.11 | ColumntelProdNpMonIfcPPPLCPStConfReqRx | read-only | mandatory | Number of Configure Request LCP frames received through the link shown in the indexes. These frames are transmitted when a link is started and contains link co… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.3.1.12 | ColumntelProdNpMonIfcPPPLCPStConfReqTx | read-only | mandatory | Number of Configure Request LCP frames sent through the link shown in the indexes. These frames are transmitted when a link is started and contains link config… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.3.1.13 | ColumntelProdNpMonIfcPPPLCPStConfAckRx | read-only | mandatory | Number of Configure Ack LCP frames received through the link shown in the indexes. These frames are answers to Configure Requests and shows accordance with the… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.3.1.14 | ColumntelProdNpMonIfcPPPLCPStConfAckTx | read-only | mandatory | Number of Configure Ack LCP frames transmitted through the link shown in the indexes. These frames are answers to Configure Requests and shows accordance with … |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.3.1.15 | ColumntelProdNpMonIfcPPPLCPStConfNakRx | read-only | mandatory | Number of Configure Nak LCP frames received through the link shown in the indexes. These frames are answers to Configure Requests and indicates that some confi… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.3.1.16 | ColumntelProdNpMonIfcPPPLCPStConfNakTx | read-only | mandatory | Number of Configure Nak LCP frames transmitted through the link shown in the indexes. These frames are answers to Configure Requests and indicates that some co… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.3.1.17 | ColumntelProdNpMonIfcPPPLCPStConfRejRx | read-only | mandatory | Number of Configure Reject LCP frames received through the link shown in the indexes. These frames are answers to Configure Requests and indicates that some co… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.3.1.18 | ColumntelProdNpMonIfcPPPLCPStConfRejTx | read-only | mandatory | Number of Configure Reject LCP frames transmitted through the link shown in the indexes. These frames are answers to Configure Requests and indicates that some… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.3.1.19 | ColumntelProdNpMonIfcPPPLCPStTermReqRx | read-only | mandatory | Number of Terminate Request LCP frames received through the link shown in the indexes. These frames are transmitted to finish, close, the link. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.3.1.20 | ColumntelProdNpMonIfcPPPLCPStTermReqTx | read-only | mandatory | Number of Terminate Request LCP frames transmitted through the link shown in the indexes. These frames are transmitted to finish, close, the link. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.3.1.21 | ColumntelProdNpMonIfcPPPLCPStTermAckRx | read-only | mandatory | Number of Terminate Ack LCP frames received through the link shown in the indexes. These frames are transmitted after a Terminate Request is received. The rece… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.3.1.22 | ColumntelProdNpMonIfcPPPLCPStTermAckTx | read-only | mandatory | Number of Terminate Ack LCP frames transmitted through the link shown in the indexes. These frames are transmitted after a Terminate Request is received. The r… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.3.1.23 | ColumntelProdNpMonIfcPPPLCPStEchoReqRx | read-only | mandatory | Number of Echo Request LCP frames received through the link shown in the indexes. These frames are used in link maintenance. From time to time a query containi… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.3.1.24 | ColumntelProdNpMonIfcPPPLCPStEchoReqTx | read-only | mandatory | Number of Echo Request LCP frames transmitted through the link shown in the indexes. These frames are used in link maintenance. From time to time a query conta… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.3.1.25 | ColumntelProdNpMonIfcPPPLCPStEchoRepRx | read-only | mandatory | Number of Echo Reply LCP frames received through the link shown in the indexes. These frames are used in link maintenance. From time to time a query containing… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.3.1.26 | ColumntelProdNpMonIfcPPPLCPStEchoRepTx | read-only | mandatory | Number of Echo Reply LCP frames transmitted through the link shown in the indexes. These frames are used in link maintenance. From time to time a query contain… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.2 | NodetelProdNpMonIfcPPPIPCPGroup | |||
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.2.1 | TabletelProdNpMonIfcPPPIPCPControlGloTable | not-accessible | obsolete | This table contains IPCP global parameters. This table has an entry for each PPP interface of the node. The entry number is determined by the corresponding int… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.2.1.1 | RowtelProdNpMonIfcPPPIPCPControlGloEntry | not-accessible | obsolete | Each entry contains the node interface number which is the table index, and a variable that shows the current state of the IPCP protocol. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.2.1.1.1 | ColumntelProdNpMonIfcPPPIPCPCtrlGloIndex | read-only | obsolete | Interface number of the node, that indicates the corresponding table entry (it is the table index). |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.2.1.1.2 | ColumntelProdNpMonIfcPPPIPCPCtrlGloState | read-only | obsolete | Current protocol state. The possible values of the variable are integer numbers between 0 and 9. Each number is related to a feasible state: (0) initial, (1) s… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.2.2 | TabletelProdNpMonIfcPPPIPCPControlOptionsTable | not-accessible | obsolete | This table contains information about parameters used to monitor received and transmitted options during the network level protocol setup. The entry number is … |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.2.2.1 | RowtelProdNpMonIfcPPPIPCPControlOptionsEntry | not-accessible | obsolete | Each entry contains the node interface number, which is the table index, the assigned IP address (in case of dinamic asignation), remote end IP address (if rec… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.2.2.1.1 | ColumntelProdNpMonIfcPPPIPCPCtrlOptIndex | read-only | obsolete | Interface number of the node, that indicates the corresponding table entry (it is the table index). |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.2.2.1.2 | ColumntelProdNpMonIfcPPPIPCPCtrlOptIpAddrLoc | read-only | obsolete | The IP address assigned (supposing dinamic assignation has been selected). |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.2.2.1.3 | ColumntelProdNpMonIfcPPPIPCPCtrlOptIpAddrRem | read-only | obsolete | The remote IP address (supposing it has been received). |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.2.2.1.4 | ColumntelProdNpMonIfcPPPIPCPCtrlOptVJCmpLoc | read-only | obsolete | Van Jacobson compression selected or not in the local end: (1) yes, (2) no. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.2.2.1.5 | ColumntelProdNpMonIfcPPPIPCPCtrlOptVJCmpRem | read-only | obsolete | Van Jacobson compression selected or not in the remote end: (0) non negotiated, (1) yes, (2) no. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.2.3 | TabletelProdNpMonIfcPPPIPCPStatsTable | not-accessible | obsolete | This table contains statistics of the IPCP protocol. The entry number is determined by the interface number (table index). |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.2.3.1 | RowtelProdNpMonIfcPPPIPCPStatsEntry | not-accessible | obsolete | Each entry contains the node interface number, which is the table index, a variable to check variables deletion (corresponding counters reset), and information… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.2.3.1.1 | ColumntelProdNpMonIfcPPPIPCPStIndex | read-only | obsolete | Interface number of the node, that indicates the corresponding table entry (it is the table index). |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.2.3.1.2 | ColumntelProdNpMonIfcPPPIPCPStClear | read-write | obsolete | This variable when is readed shows the output from the last counter restart attempt: the value is 2 (ok) if the restart was performed succesfully, 3 (error) if… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.2.3.1.3 | ColumntelProdNpMonIfcPPPIPCPStConfReqRx | read-only | obsolete | Number of Configure Request NCP frames received through the interface number shown in the index. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.2.3.1.4 | ColumntelProdNpMonIfcPPPIPCPStConfReqTx | read-only | obsolete | Number of Configure Request NCP frames transmitted through the interface number shown in the index. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.2.3.1.5 | ColumntelProdNpMonIfcPPPIPCPStConfAckRx | read-only | obsolete | Number of Configure Ack NCP frames received through the interface number shown in the index. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.2.3.1.6 | ColumntelProdNpMonIfcPPPIPCPStConfAckTx | read-only | obsolete | Number of Configure Ack NCP frames transmitted through the interface number shown in the index. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.2.3.1.7 | ColumntelProdNpMonIfcPPPIPCPStConfNakRx | read-only | obsolete | Number of Configure Nak NCP frames received through the interface number shown in the index. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.2.3.1.8 | ColumntelProdNpMonIfcPPPIPCPStConfNakTx | read-only | obsolete | Number of Configure Nak NCP frames transmitted through the interface number shown in the index. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.2.3.1.9 | ColumntelProdNpMonIfcPPPIPCPStConfRejRx | read-only | obsolete | Number of Configure Reject NCP frames received through the interface number shown in the index. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.2.3.1.10 | ColumntelProdNpMonIfcPPPIPCPStConfRejTx | read-only | obsolete | Number of Configure Reject NCP frames transmitted through the interface number shown in the index. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.2.3.1.11 | ColumntelProdNpMonIfcPPPIPCPStTermReqRx | read-only | obsolete | Number of Terminate Request NCP frames received through the interface number shown in the index. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.2.3.1.12 | ColumntelProdNpMonIfcPPPIPCPStTermReqTx | read-only | obsolete | Number of Terminate Request NCP frames transmitted through the interface number shown in the index. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.2.3.1.13 | ColumntelProdNpMonIfcPPPIPCPStTermAckRx | read-only | obsolete | Number of Terminate Ack NCP frames received through the interface number shown in the index. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.2.3.1.14 | ColumntelProdNpMonIfcPPPIPCPStTermAckTx | read-only | obsolete | Number of Terminate Ack NCP frames transmitted through the interface number shown in the index. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.3 | TabletelProdNpMonIfcPPPVJStatsTable | not-accessible | mandatory | This table contains monitoring parameters related to Van Jacobson compression. The entry number is determined by the interface number. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.3.1 | RowtelProdNpMonIfcPPPVJStatsEntry | not-accessible | mandatory | Each entry contains the node interface number, which is the table index, a variable to check variables deletion (corresponding counters reset), and information… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.3.1.1 | ColumntelProdNpMonIfcPPPVJStIndex | read-only | mandatory | Interface number of the node, that indicates the corresponding table entry (it is the table index). |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.3.1.2 | ColumntelProdNpMonIfcPPPVJStClear | read-write | mandatory | This variable when is readed shows the output from the last counter restart attemp: the value is 2 (ok) if the restart was performed succesfully, 3 (error) if … |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.3.1.3 | ColumntelProdNpMonIfcPPPVJStOutPackets | read-only | mandatory | Number of outbound TCP/IP packets. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.3.1.4 | ColumntelProdNpMonIfcPPPVJStOutComprPkts | read-only | mandatory | Number of outbound compressed TCP/IP packets. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.3.1.5 | ColumntelProdNpMonIfcPPPVJStSearches | read-only | mandatory | Number of searchs of the connection state. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.3.1.6 | ColumntelProdNpMonIfcPPPVJStNoConnState | read-only | mandatory | Times the connection state could not be found. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.3.1.7 | ColumntelProdNpMonIfcPPPVJStInUncomPkts | read-only | mandatory | Number of inbound uncompressed TCP/IP packets. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.3.1.8 | ColumntelProdNpMonIfcPPPVJStInComprPkts | read-only | mandatory | Number of inbound compressed TCP/IP packets. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.3.1.9 | ColumntelProdNpMonIfcPPPVJStInUnkTypePkts | read-only | mandatory | Number of inbound TCP/IP packets classified as unkown. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.3.1.10 | ColumntelProdNpMonIfcPPPVJStInPktsTossErr | read-only | mandatory | Number of inbound TCP/IP packets tossed error. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.4 | TabletelProdNpMonIfcPPPCrtpStatsTable | not-accessible | mandatory | This table contains monitoring parameters related to CRTP compression. The entry number is determined by the interface number. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.4.1 | RowtelProdNpMonIfcPPPCrtpStatsEntry | not-accessible | mandatory | Each entry contains the node interface number, which is the table index, a variable to check variables deletion (corresponding counters reset), and information… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.4.1.1 | ColumntelProdNpMonIfcPPPCrtpStIndex | read-only | mandatory | Interface number of the node, that indicates the corresponding table entry (it is the table index). |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.4.1.2 | ColumntelProdNpMonIfcPPPCrtpStClear | read-write | mandatory | This variable when is readed shows the output from the last counter restart attempt: the value is 2 (ok) if the restart was performed succesfully, 3 (error) if… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.4.1.3 | ColumntelProdNpMonIfcPPPCrtpStOutPackets | read-only | mandatory | Number of outbound RTP packets. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.4.1.4 | ColumntelProdNpMonIfcPPPCrtpStOutComprPkts | read-only | mandatory | Number of outbound compressed RTP packets. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.4.1.5 | ColumntelProdNpMonIfcPPPCrtpStSearches | read-only | mandatory | Number of searchs of the connection state. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.4.1.6 | ColumntelProdNpMonIfcPPPCrtpStNoConnState | read-only | mandatory | Times the connection state could not be found. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.4.1.7 | ColumntelProdNpMonIfcPPPCrtpStInUncomPkts | read-only | mandatory | Number of inbound uncompressed RTP packets. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.4.1.8 | ColumntelProdNpMonIfcPPPCrtpStInComprPkts | read-only | mandatory | Number of inbound compressed RTP packets. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.4.1.9 | ColumntelProdNpMonIfcPPPCrtpStInUnkTypePkts | read-only | mandatory | Number of inbound RTP packets classified as unkown. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.4.1.10 | ColumntelProdNpMonIfcPPPCrtpStInContextStPkts | read-only | mandatory | Number of inbound RTP Context State packets |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.5 | NodetelProdNpMonIfcPPPCommandGroup | |||
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.5.1 | TabletelProdNpMonIfcPPPCommClearTable | not-accessible | mandatory | Table of CLEAR commands for different interfaces. The entry number is determined by the interface number and indicates the interface type to which this command… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.5.1.1 | RowtelProdNpMonIfcPPPCommClearEntry | not-accessible | mandatory | Each entry contains the interface number, that is the table index, and indicates the interface the CLEAR command is applied on, a variable to perform the CLEAR… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.5.1.1.1 | ColumntelProdNpMonIfcPPPCommClearIndex | read-only | mandatory | Interface number of the node, that indicates the corresponding table entry (it is the table index). |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.5.1.1.2 | ColumntelProdNpMonIfcPPPCommClear | read-write | mandatory | This variable when is readed shows the output from the last attempt to restart interface statistics. Possible values are: 2 (ok) if the restart was performed s… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.5.2 | TabletelProdNpMonIfcPPPCommResetTable | not-accessible | mandatory | Table of RESET-LINK commands for different type of interfaces. The entry number is determined by the interface number, and indicates which interface we are con… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.5.2.1 | RowtelProdNpMonIfcPPPCommResetEntry | not-accessible | mandatory | Each entry contains the node interface number, that is the table index, and indicates the interface the RESET-LINK command is applied on, and a variable to per… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.5.2.1.1 | ColumntelProdNpMonIfcPPPCommResetIndex | read-only | mandatory | Interface number of the node, that indicates the corresponding table entry (it is the table index). |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.5.2.1.2 | ColumntelProdNpMonIfcPPPCommReset | read-write | mandatory | This variable when is readed shows the output from the last attempt to drop PPP link. Possible values are: 2 (ok) if the operation was performed succesfully, 3… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.6 | NodetelProdNpMonIfcPPPCCPGroup | |||
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.1 | TabletelProdNpMonIfcPPPCCPControlGloTable | not-accessible | mandatory | This table contains CCP global parameters. This table has an entry for each PPP interface. The entry number is determined by the corresponding interface number… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.1.1 | RowtelProdNpMonIfcPPPCCPControlGloEntry | not-accessible | mandatory | Each entry contains the node interface number which is the table index, and variables that shows if the CCP protocol is enabled or disabled, and the current st… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.1.1.1 | ColumntelProdNpMonIfcPPPCCPCtrlGloIndex | read-only | mandatory | Interface number of the node, that indicates the corresponding table entry (it is the table index). |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.1.1.2 | ColumntelProdNpMonIfcPPPCCPCtrlGloCCP | read-only | mandatory | This variable indicates if the CCP protocol is enabled or disabled. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.1.1.3 | ColumntelProdNpMonIfcPPPCCPCtrlGloState | read-only | mandatory | Current protocol state. The possible values of the variable are integer numbers between 0 and 9. Each number is related to a feasible state: (0) initial, (1) s… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.2 | TabletelProdNpMonIfcPPPCCPControlOptionsTable | not-accessible | mandatory | This table contains the variables that informs about the CCP protocol options. The entry number is determined by the interface value (table index). |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.2.1 | RowtelProdNpMonIfcPPPCCPControlOptionsEntry | not-accessible | mandatory | Each entry contains the node interface number, which is the table index, the output and input encapsulated protocol, the output and input event, the type of co… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.2.1.1 | ColumntelProdNpMonIfcPPPCCPCtrlOptIndex | read-only | mandatory | Interface number of the node, that indicates the corresponding table entry (it is the table index). |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.2.1.2 | ColumntelProdNpMonIfcPPPCCPCtrlOptProtOut | read-only | mandatory | Output encapsulated protocol. It can be used PPP (1), MPPP (2) or other different of thesesones (3). |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.2.1.3 | ColumntelProdNpMonIfcPPPCCPCtrlOptProtIn | read-only | mandatory | Input encapsulated protocol. It can be used PPP (1), MPPP (2) or other different of thesesones (3). |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.2.1.4 | ColumntelProdNpMonIfcPPPCCPCtrlOptEventOut | read-only | mandatory | Output event. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.2.1.5 | ColumntelProdNpMonIfcPPPCCPCtrlOptEventIn | read-only | mandatory | Input event. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.2.1.6 | ColumntelProdNpMonIfcPPPCCPCtrlOptTypeOut | read-only | mandatory | Type of configuration format associated to the output. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.2.1.7 | ColumntelProdNpMonIfcPPPCCPCtrlOptTypeIn | read-only | mandatory | Type of configuration format associated to the input. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.2.1.8 | ColumntelProdNpMonIfcPPPCCPCtrlOptHistOut | read-only | mandatory | The number of output negotiated histories. This variable indicates pack to pack or the corresponding number. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.2.1.9 | ColumntelProdNpMonIfcPPPCCPCtrlOptHistIn | read-only | mandatory | The number of input negotiated histories. This variable indicates pack to pack or the corresponding number. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.2.1.10 | ColumntelProdNpMonIfcPPPCCPCtrlOptChkModOut | read-only | mandatory | Output negotiated check mode. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.2.1.11 | ColumntelProdNpMonIfcPPPCCPCtrlOptChkModIn | read-only | mandatory | Input negotiated check mode. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.2.1.12 | ColumntelProdNpMonIfcPPPCCPCtrlOptPrcModOut | read-only | mandatory | Output negotiated process mode. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.2.1.13 | ColumntelProdNpMonIfcPPPCCPCtrlOptPrcModIn | read-only | mandatory | Input negotiated process mode. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.2.1.14 | ColumntelProdNpMonIfcPPPCCPCtrlOptSessionOut | read-only | mandatory | Output session identifier. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.2.1.15 | ColumntelProdNpMonIfcPPPCCPCtrlOptSessionIn | read-only | mandatory | Input session identifier. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.2.1.16 | ColumntelProdNpMonIfcPPPCCPCtrlOptSeqNumOut | read-only | mandatory | Output sequence number. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.2.1.17 | ColumntelProdNpMonIfcPPPCCPCtrlOptSeqNumIn | read-only | mandatory | Input sequence number. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3 | TabletelProdNpMonIfcPPPCCPStatsTable | not-accessible | mandatory | This table contains statistics of the CCP protocol. The entry number is determined by the interface number (table index). |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1 | RowtelProdNpMonIfcPPPCCPStatsEntry | not-accessible | mandatory | Each entry contains the node interface number, which is the table index, a variable to check variables deletion (corresponding counters reset), and information… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.1 | ColumntelProdNpMonIfcPPPCCPStIndex | read-only | mandatory | Interface number of the node, that indicates the corresponding table entry (it is the table index). |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.2 | ColumntelProdNpMonIfcPPPCCPStClear | read-write | mandatory | This variable when is readed shows the output from the last counter restart attempt: the value is 2 (ok) if the restart was performed succesfully, 3 (error) if… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.3 | ColumntelProdNpMonIfcPPPCCPStConfReqRx | read-only | mandatory | Number of received Configure Request CCP frames. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.4 | ColumntelProdNpMonIfcPPPCCPStConfReqTx | read-only | mandatory | Number of sent Configure Request CCP frames. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.5 | ColumntelProdNpMonIfcPPPCCPStConfAckRx | read-only | mandatory | Number of received Configure Ack CCP frames. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.6 | ColumntelProdNpMonIfcPPPCCPStConfAckTx | read-only | mandatory | Number of sent Configure Ack CCP frames. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.7 | ColumntelProdNpMonIfcPPPCCPStConfNakRx | read-only | mandatory | Number of received Configure Nak CCP frames. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.8 | ColumntelProdNpMonIfcPPPCCPStConfNakTx | read-only | mandatory | Number of sent Configure Nak CCP frames. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.9 | ColumntelProdNpMonIfcPPPCCPStConfRejRx | read-only | mandatory | Number of received Configure Reject CCP frames. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.10 | ColumntelProdNpMonIfcPPPCCPStConfRejTx | read-only | mandatory | Number of sent Configure Reject CCP frames. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.11 | ColumntelProdNpMonIfcPPPCCPStTermReqRx | read-only | mandatory | Number of received Terminate Request CCP frames. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.12 | ColumntelProdNpMonIfcPPPCCPStTermReqTx | read-only | mandatory | Number of sent Terminate Request CCP frames. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.13 | ColumntelProdNpMonIfcPPPCCPStTermAckRx | read-only | mandatory | Number of received Terminate Ack CCP frames. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.14 | ColumntelProdNpMonIfcPPPCCPStTermAckTx | read-only | mandatory | Number of sent Terminate Ack CCP frames. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.15 | ColumntelProdNpMonIfcPPPCCPStProcFrsRx | read-only | mandatory | Number of processed frames received for uncompress. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.16 | ColumntelProdNpMonIfcPPPCCPStProcFrsTx | read-only | mandatory | Number of processed frames received for compress. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.17 | ColumntelProdNpMonIfcPPPCCPStProcBytRx | read-only | mandatory | Number of processed bytes received for uncompress. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.18 | ColumntelProdNpMonIfcPPPCCPStProcBytTx | read-only | mandatory | Number of processed bytes received for compress. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.19 | ColumntelProdNpMonIfcPPPCCPStFramesRx | read-only | mandatory | Number of uncompressed frames. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.20 | ColumntelProdNpMonIfcPPPCCPStFramesTx | read-only | mandatory | Number of compressed frames. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.21 | ColumntelProdNpMonIfcPPPCCPStBytesRx | read-only | mandatory | Number of uncompressed bytes. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.22 | ColumntelProdNpMonIfcPPPCCPStBytesTx | read-only | mandatory | Number of compressed bytes. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.23 | ColumntelProdNpMonIfcPPPCCPStUncompFrsRx | read-only | mandatory | Number of non processed frames received for uncompress. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.24 | ColumntelProdNpMonIfcPPPCCPStUncompFrsTx | read-only | mandatory | Number of non processed frames received for compress. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.25 | ColumntelProdNpMonIfcPPPCCPStErrorFrsRx | read-only | mandatory | Number of frames whith errors in compression. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.26 | ColumntelProdNpMonIfcPPPCCPStErrorFrsTx | read-only | mandatory | Number of frames whith errors in uncompression. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.27 | ColumntelProdNpMonIfcPPPCCPStResetReqRx | read-only | mandatory | Number of received Reset Request CCP frames. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.28 | ColumntelProdNpMonIfcPPPCCPStResetReqTx | read-only | mandatory | Number of sent Reset Request CCP frames. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.29 | ColumntelProdNpMonIfcPPPCCPStResetAckRx | read-only | mandatory | Number of received Reset Ack CCP frames. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.30 | ColumntelProdNpMonIfcPPPCCPStResetAckTx | read-only | mandatory | Number of sent Reset Ack CCP frames. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.31 | ColumntelProdNpMonIfcPPPCCPStSeqErrorsRx | read-only | mandatory | Number of sequence errors in reception. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.32 | ColumntelProdNpMonIfcPPPCCPStSeqErrorsTx | read-only | mandatory | Number of sequence errors in transmission. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.33 | ColumntelProdNpMonIfcPPPCCPStLCBErrorsRx | read-only | mandatory | Number of LCB errors in reception. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.34 | ColumntelProdNpMonIfcPPPCCPStLCBErrorsTx | read-only | mandatory | Number of LCB errors in transmission. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.35 | ColumntelProdNpMonIfcPPPCCPStHdrErrorsRx | read-only | mandatory | Number of received header errors. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.36 | ColumntelProdNpMonIfcPPPCCPStHdrErrorsTx | read-only | mandatory | Number of sent header errors. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.7 | NodetelProdNpMonIfcPPPMPGroup | |||
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.1 | TabletelProdNpMonIfcPPPMPControlGloTable | not-accessible | mandatory | This table contains Multilink PPP global parameters. This table has an entry for each PPP interface. The entry number is determined by the corresponding interf… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.1.1 | RowtelProdNpMonIfcPPPMPControlGloEntry | not-accessible | mandatory | Each entry contains the node interface number which is the table index, and variables that shows the remote user name, the number of active links in bundle and… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.1.1.1 | ColumntelProdNpMonIfcPPPMPCtrlGloIndex | read-only | mandatory | Interface number of the node, that indicates the corresponding table entry (it is the table index). |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.1.1.2 | ColumntelProdNpMonIfcPPPMPCtrlGloRemUserName | read-only | mandatory | When the authentication is enabled, this variable indicates the remote user name. In other case, it contains a empty string. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.1.1.3 | ColumntelProdNpMonIfcPPPMPCtrlGloBundleLinks | read-only | mandatory | This variable shows the number of active links in bundle. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.1.1.4 | ColumntelProdNpMonIfcPPPMPCtrlGloFragments | read-only | mandatory | This variable shows the current fragment queue length. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.1.1.5 | ColumntelProdNpMonIfcPPPMPCtrlGloRTFragments | read-only | mandatory | This variable shows the current fragment queue length for real time traffic. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.2 | TabletelProdNpMonIfcPPPMPControlOptionsTable | not-accessible | mandatory | This table contains the variables that informs about the Multilink PPP options. The entry number is determined by the interface value (table index). |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.2.1 | RowtelProdNpMonIfcPPPMPControlOptionsEntry | not-accessible | mandatory | Each entry contains the node interface number, which is the table index, the local and remote maximum packet size accepted in reception, if short sequence numb… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.2.1.1 | ColumntelProdNpMonIfcPPPMPCtrlOptIndex | read-only | mandatory | Interface number of the node, that indicates the corresponding table entry (it is the table index). |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.2.1.2 | ColumntelProdNpMonIfcPPPMPCtrlOptMRRULoc | read-only | mandatory | Maximum packet size accepted in reception associated to the local end. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.2.1.3 | ColumntelProdNpMonIfcPPPMPCtrlOptMRRURem | read-only | mandatory | Maximum packet size accepted in reception associated to the remote end. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.2.1.4 | ColumntelProdNpMonIfcPPPMPCtrlOptSSNLoc | read-only | mandatory | This variable shows if the short sequence number header format in the local end is enabled or disabled. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.2.1.5 | ColumntelProdNpMonIfcPPPMPCtrlOptSSNRem | read-only | mandatory | This variable shows if the short sequence number header format in the remote end is enabled or disabled. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.2.1.6 | ColumntelProdNpMonIfcPPPMPCtrlOptClassLoc | read-only | mandatory | This variable shows the class associated to the local end. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.2.1.7 | ColumntelProdNpMonIfcPPPMPCtrlOptClassRem | read-only | mandatory | This variable shows the class associated to the remote end. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.2.1.8 | ColumntelProdNpMonIfcPPPMPCtrlOptAddressLoc | read-only | mandatory | This variable indicates the address associated to the local end. It is a string that must be interpreted according to the local class. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.2.1.9 | ColumntelProdNpMonIfcPPPMPCtrlOptAddressRem | read-only | mandatory | This variable indicates the address associated to the remote end. It is a string that must be interpreted according to the remote class. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.2.1.10 | ColumntelprodNpMonIfcPPPMPCtrlOptMHFNeg | read-only | mandatory | This variable shows if the multiclass multilink option has been negotiated. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.3 | TabletelProdNpMonIfcPPPMPStatsTable | not-accessible | mandatory | This table contains statistics of the Multilink PPP. The entry number is determined by the interface number (table index). |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.3.1 | RowtelProdNpMonIfcPPPMPStatsEntry | not-accessible | mandatory | Each entry contains the node interface number, which is the table index, a variable to check variables deletion (corresponding counters reset), and information… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.3.1.1 | ColumntelProdNpMonIfcPPPMPStIndex | read-only | mandatory | Interface number of the node, that indicates the corresponding table entry (it is the table index). |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.3.1.2 | ColumntelProdNpMonIfcPPPMPStClear | read-write | mandatory | This variable when is readed shows the output from the last counter restart attempt: the value is 2 (ok) if the restart was performed succesfully, 3 (error) if… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.3.1.3 | ColumntelProdNpMonIfcPPPMPStFramesTx | read-only | mandatory | Number of sent frames. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.3.1.4 | ColumntelProdNpMonIfcPPPMPStFramesRx | read-only | mandatory | Number of received frames. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.3.1.5 | ColumntelProdNpMonIfcPPPMPStBytesTx | read-only | mandatory | Number of sent bytes. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.3.1.6 | ColumntelProdNpMonIfcPPPMPStBytesRx | read-only | mandatory | Number of received bytes. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.3.1.7 | ColumntelProdNpMonIfcPPPMPStQueuedFrm | read-only | mandatory | Number of queued received frames. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.3.1.8 | ColumntelProdNpMonIfcPPPMPStErrorFrm | read-only | mandatory | Number of rejected frames due to errors. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.3.1.9 | ColumntelProdNpMonIfcPPPMPStSeqLoss | read-only | mandatory | Number of sequence loss in reception. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.3.1.10 | ColumntelProdNpMonIfcPPPMPStRTFramesTx | read-only | mandatory | Number of sent real time frames. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.3.1.11 | ColumntelProdNpMonIfcPPPMPStRTFramesRx | read-only | mandatory | Number of received real time frames. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.3.1.12 | ColumntelProdNpMonIfcPPPMPStRTBytesTx | read-only | mandatory | Number of sent real time bytes. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.3.1.13 | ColumntelProdNpMonIfcPPPMPStRTBytesRx | read-only | mandatory | Number of received real time bytes. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.3.1.14 | ColumntelProdNpMonIfcPPPMPStRTQueuedFrm | read-only | mandatory | Number of queued received real time frames. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.3.1.15 | ColumntelProdNpMonIfcPPPMPStRTErrorFrm | read-only | mandatory | Number of rejected real time frames due to errors. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.3.1.16 | ColumntelProdNpMonIfcPPPMPStRTSeqLoss | read-only | mandatory | Number of sequence loss in reception of real time frames. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.8 | TabletelProdNpMonIfcPPPDialTable | not-accessible | mandatory | This table contains information about monitoring parameters associated to Dial part of PPP. The entry number is determined by the PPP interface value and the D… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.8.1 | RowtelProdNpMonIfcPPPDialEntry | not-accessible | mandatory | Each entry contains the PPP interface number of the node, the Dial order number, the Dial profile name, the remote address, the local address, the number of th… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.8.1.1 | ColumntelProdNpMonIfcPPPDialIfcIndex | read-only | mandatory | PPP interface number of the node (first table index). |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.8.1.2 | ColumntelProdNpMonIfcPPPDialOrderIndex | read-only | mandatory | Dial order number inside the PPP interface (second table index). |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.8.1.3 | ColumntelProdNpMonIfcPPPDialName | read-only | mandatory | Dial profile name. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.8.1.4 | ColumntelProdNpMonIfcPPPDialDesAddr | read-only | mandatory | If the interface that support the PPP interface is switched, this variable indicates the remote address. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.8.1.5 | ColumntelProdNpMonIfcPPPDialLocAddr | read-only | mandatory | If the interface that support the PPP interface is switched, this variable indicates the local address. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.8.1.6 | ColumntelProdNpMonIfcPPPDialLowIfc | read-only | mandatory | Number of the interface the PPP is mounted over. In this case, the interfaces are numbered from 0, the same as in console. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.8.1.7 | ColumntelProdNpMonIfcPPPDialCircReq | read-only | mandatory | When the interface that support the PPP interface is composed of different subinterfaces, this variable specifies the requested circuit identifier. Its value m… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.8.1.8 | ColumntelProdNpMonIfcPPPDialCircStatus | read-only | mandatory | Dial circuit state. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.8.1.9 | ColumntelProdNpMonIfcPPPDialCircAsig | read-only | mandatory | When the interface that support the PPP interface is composed of different subinterfaces, this variable specifies the assigned circuit identifier. If the Dial … |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9 | NodetelProdNpMonIfcPPPNCPGroup | |||
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.1 | NodetelProdNpMonIfcPPPNCPIPCPGroup | |||
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.1.1 | TabletelProdNpMonIfcPPPNCPIPCPControlGloTable | not-accessible | mandatory | This table contains IPCP global parameters. This table has an entry for each PPP interface of the node. The entry number is determined by the corresponding int… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.1.1.1 | RowtelProdNpMonIfcPPPNCPIPCPControlGloEntry | not-accessible | mandatory | Each entry contains the node interface number which is the table index, and a variable that shows the current state of the IPCP protocol. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.1.1.1.1 | ColumntelProdNpMonIfcPPPNCPIPCPCtrlGloIndex | read-only | mandatory | Interface number of the node, that indicates the corresponding table entry (it is the table index). |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.1.1.1.2 | ColumntelProdNpMonIfcPPPNCPIPCPCtrlGloState | read-only | mandatory | Current protocol state. The possible values of the variable are integer numbers between 0 and 9. Each number is related to a feasible state: (0) initial, (1) s… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.1.2 | TabletelProdNpMonIfcPPPNCPIPCPControlOptionsTable | not-accessible | mandatory | This table contains information about parameters used to monitor received and transmitted options during the network level protocol setup. The entry number is … |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.1.2.1 | RowtelProdNpMonIfcPPPNCPIPCPControlOptionsEntry | not-accessible | mandatory | Each entry contains the node interface number, which is the table index, the assigned IP address (in case of dinamic asignation), remote end IP address (if rec… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.1.2.1.1 | ColumntelProdNpMonIfcPPPNCPIPCPCtrlOptIndex | read-only | mandatory | Interface number of the node, that indicates the corresponding table entry (it is the table index). |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.1.2.1.2 | ColumntelProdNpMonIfcPPPNCPIPCPCtrlOptIpAddrLoc | read-only | mandatory | The IP address assigned (supposing dinamic assignation has been selected). |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.1.2.1.3 | ColumntelProdNpMonIfcPPPNCPIPCPCtrlOptIpAddrRem | read-only | mandatory | The remote IP address (supposing it has been received). |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.1.2.1.4 | ColumntelProdNpMonIfcPPPNCPIPCPCtrlOptVJCmpLoc | read-only | mandatory | Van Jacobson compression selected or not in the local end: (1) yes, (2) no. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.1.2.1.5 | ColumntelProdNpMonIfcPPPNCPIPCPCtrlOptVJCmpRem | read-only | mandatory | Van Jacobson compression selected or not in the remote end: (0) non negotiated, (1) yes, (2) no. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.1.3 | TabletelProdNpMonIfcPPPNCPIPCPStatsTable | not-accessible | mandatory | This table contains statistics of the IPCP protocol. The entry number is determined by the interface number (table index). |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.1.3.1 | RowtelProdNpMonIfcPPPNCPIPCPStatsEntry | not-accessible | mandatory | Each entry contains the node interface number, which is the table index, a variable to check variables deletion (corresponding counters reset), and information… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.1.3.1.1 | ColumntelProdNpMonIfcPPPNCPIPCPStIndex | read-only | mandatory | Interface number of the node, that indicates the corresponding table entry (it is the table index). |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.1.3.1.2 | ColumntelProdNpMonIfcPPPNCPIPCPStClear | read-write | mandatory | This variable when is readed shows the output from the last counter restart attempt: the value is 2 (ok) if the restart was performed succesfully, 3 (error) if… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.1.3.1.3 | ColumntelProdNpMonIfcPPPNCPIPCPStConfReqRx | read-only | mandatory | Number of Configure Request NCP frames received through the interface number shown in the index. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.1.3.1.4 | ColumntelProdNpMonIfcPPPNCPIPCPStConfReqTx | read-only | mandatory | Number of Configure Request NCP frames transmitted through the interface number shown in the index. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.1.3.1.5 | ColumntelProdNpMonIfcPPPNCPIPCPStConfAckRx | read-only | mandatory | Number of Configure Ack NCP frames received through the interface number shown in the index. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.1.3.1.6 | ColumntelProdNpMonIfcPPPNCPIPCPStConfAckTx | read-only | mandatory | Number of Configure Ack NCP frames transmitted through the interface number shown in the index. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.1.3.1.7 | ColumntelProdNpMonIfcPPPNCPIPCPStConfNakRx | read-only | mandatory | Number of Configure Nak NCP frames received through the interface number shown in the index. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.1.3.1.8 | ColumntelProdNpMonIfcPPPNCPIPCPStConfNakTx | read-only | mandatory | Number of Configure Nak NCP frames transmitted through the interface number shown in the index. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.1.3.1.9 | ColumntelProdNpMonIfcPPPNCPIPCPStConfRejRx | read-only | mandatory | Number of Configure Reject NCP frames received through the interface number shown in the index. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.1.3.1.10 | ColumntelProdNpMonIfcPPPNCPIPCPStConfRejTx | read-only | mandatory | Number of Configure Reject NCP frames transmitted through the interface number shown in the index. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.1.3.1.11 | ColumntelProdNpMonIfcPPPNCPIPCPStTermReqRx | read-only | mandatory | Number of Terminate Request NCP frames received through the interface number shown in the index. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.1.3.1.12 | ColumntelProdNpMonIfcPPPNCPIPCPStTermReqTx | read-only | mandatory | Number of Terminate Request NCP frames transmitted through the interface number shown in the index. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.1.3.1.13 | ColumntelProdNpMonIfcPPPNCPIPCPStTermAckRx | read-only | mandatory | Number of Terminate Ack NCP frames received through the interface number shown in the index. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.1.3.1.14 | ColumntelProdNpMonIfcPPPNCPIPCPStTermAckTx | read-only | mandatory | Number of Terminate Ack NCP frames transmitted through the interface number shown in the index. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2 | NodetelProdNpMonIfcPPPNCPBCPGroup | |||
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.1 | TabletelProdNpMonIfcPPPNCPBCPControlGloTable | not-accessible | mandatory | This table contains BCP global parameters. This table has an entry for each PPP interface of the node. The entry number is determined by the corresponding inte… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.1.1 | RowtelProdNpMonIfcPPPNCPBCPControlGloEntry | not-accessible | mandatory | Each entry contains the node interface number which is the table index, and a variable that shows the current state of the BCP protocol. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.1.1.1 | ColumntelProdNpMonIfcPPPNCPBCPCtrlGloIndex | read-only | mandatory | Interface number of the node, that indicates the corresponding table entry (it is the table index). |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.1.1.2 | ColumntelProdNpMonIfcPPPNCPBCPCtrlGloState | read-only | mandatory | Current protocol state. The possible values of the variable are integer numbers between 0 and 9. Each number is related to a feasible state: (0) initial, (1) s… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.2 | TabletelProdNpMonIfcPPPNCPBCPControlOptionsTable | not-accessible | mandatory | This table contains information about parameters used to monitor received and transmitted options during the network level protocol setup. The entry number is … |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.2.1 | RowtelProdNpMonIfcPPPNCPBCPControlOptionsEntry | not-accessible | mandatory | Each entry contains the node interface number, which is the table index, local tinygram support and remote tinygram support. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.2.1.1 | ColumntelProdNpMonIfcPPPNCPBCPCtrlOptIndex | read-only | mandatory | Interface number of the node, that indicates the corresponding table entry (it is the table index). |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.2.1.2 | ColumntelProdNpMonIfcPPPNCPBCPCtrlOptLineIdLoc | read-only | mandatory | Line Identification configured for SRB on the local end |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.2.1.3 | ColumntelProdNpMonIfcPPPNCPBCPCtrlOptLineIdRem | read-only | mandatory | Line Identification configured for SRB on the remote end |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.2.1.4 | ColumntelProdNpMonIfcPPPNCPBCPCtrlOptMac8023Loc | read-only | mandatory | Reception of IEEE 802.3 frames allowed selected or not in the local end: (1) yes, (2) no. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.2.1.5 | ColumntelProdNpMonIfcPPPNCPBCPCtrlOptMac8023Rem | read-only | mandatory | Reception of IEEE 802.3 frames allowed selected or not in the remote end: (1) yes, (2) no. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.2.1.6 | ColumntelProdNpMonIfcPPPNCPBCPCtrlOptMac8025Loc | read-only | mandatory | Reception of IEEE 802.5 frames allowed selected or not in the local end: (1) yes, (2) no. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.2.1.7 | ColumntelProdNpMonIfcPPPNCPBCPCtrlOptMac8025Rem | read-only | mandatory | Reception of IEEE 802.5 frames allowed selected or not in the remote end: (1) yes, (2) no. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.2.1.8 | ColumntelProdNpMonIfcPPPNCPBCPCtrlOptMacFddiLoc | read-only | mandatory | Reception of FDDI frames allowed selected or not in the local end: (1) yes, (2) no. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.2.1.9 | ColumntelProdNpMonIfcPPPNCPBCPCtrlOptMacFddiRem | read-only | mandatory | Reception of FDDI frames allowed selected or not in the remote end: (1) yes, (2) no. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.2.1.10 | ColumntelProdNpMonIfcPPPNCPBCPCtrlOptTinyLoc | read-only | mandatory | Tinygram compress support selected or not in the local end: (1) yes, (2) no. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.2.1.11 | ColumntelProdNpMonIfcPPPNCPBCPCtrlOptTinyRem | read-only | mandatory | Tinygram compress support selected or not in the remote end: (1) yes, (2) no. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.2.1.12 | ColumntelProdNpMonIfcPPPNCPBCPCtrlOptStp8021DLoc | read-only | mandatory | Reception of 802.1D STP frames allowed selected or not in the local end: (1) yes, (2) no. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.2.1.13 | ColumntelProdNpMonIfcPPPNCPBCPCtrlOptStp8021DRem | read-only | mandatory | Reception of 802.1D STP frames allowed selected or not in the remote end: (1) yes, (2) no. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.2.1.14 | ColumntelProdNpMonIfcPPPNCPBCPCtrlOptStpIbmSrbLoc | read-only | mandatory | Reception of IBM SRB STP frames allowed selected or not in the local end: (1) yes, (2) no. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.2.1.15 | ColumntelProdNpMonIfcPPPNCPBCPCtrlOptStpIbmSrbRem | read-only | mandatory | Reception of IBM SRB STP frames allowed selected or not in the remote end: (1) yes, (2) no. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.3 | TabletelProdNpMonIfcPPPNCPBCPStatsTable | not-accessible | mandatory | This table contains statistics of the BCP protocol. The entry number is determined by the interface number (table index). |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.3.1 | RowtelProdNpMonIfcPPPNCPBCPStatsEntry | not-accessible | mandatory | Each entry contains the node interface number, which is the table index, a variable to check variables deletion (corresponding counters reset), and information… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.3.1.1 | ColumntelProdNpMonIfcPPPNCPBCPStIndex | read-only | mandatory | Interface number of the node, that indicates the corresponding table entry (it is the table index). |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.3.1.2 | ColumntelProdNpMonIfcPPPNCPBCPStClear | read-write | mandatory | This variable when is readed shows the output from the last counter restart attempt: the value is 2 (ok) if the restart was performed succesfully, 3 (error) if… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.3.1.3 | ColumntelProdNpMonIfcPPPNCPBCPStConfReqRx | read-only | mandatory | Number of Configure Request NCP frames received through the interface number shown in the index. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.3.1.4 | ColumntelProdNpMonIfcPPPNCPBCPStConfReqTx | read-only | mandatory | Number of Configure Request NCP frames transmitted through the interface number shown in the index. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.3.1.5 | ColumntelProdNpMonIfcPPPNCPBCPStConfAckRx | read-only | mandatory | Number of Configure Ack NCP frames received through the interface number shown in the index. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.3.1.6 | ColumntelProdNpMonIfcPPPNCPBCPStConfAckTx | read-only | mandatory | Number of Configure Ack NCP frames transmitted through the interface number shown in the index. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.3.1.7 | ColumntelProdNpMonIfcPPPNCPBCPStConfNakRx | read-only | mandatory | Number of Configure Nak NCP frames received through the interface number shown in the index. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.3.1.8 | ColumntelProdNpMonIfcPPPNCPBCPStConfNakTx | read-only | mandatory | Number of Configure Nak NCP frames transmitted through the interface number shown in the index. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.3.1.9 | ColumntelProdNpMonIfcPPPNCPBCPStConfRejRx | read-only | mandatory | Number of Configure Reject NCP frames received through the interface number shown in the index. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.3.1.10 | ColumntelProdNpMonIfcPPPNCPBCPStConfRejTx | read-only | mandatory | Number of Configure Reject NCP frames transmitted through the interface number shown in the index. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.3.1.11 | ColumntelProdNpMonIfcPPPNCPBCPStTermReqRx | read-only | mandatory | Number of Terminate Request NCP frames received through the interface number shown in the index. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.3.1.12 | ColumntelProdNpMonIfcPPPNCPBCPStTermReqTx | read-only | mandatory | Number of Terminate Request NCP frames transmitted through the interface number shown in the index. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.3.1.13 | ColumntelProdNpMonIfcPPPNCPBCPStTermAckRx | read-only | mandatory | Number of Terminate Ack NCP frames received through the interface number shown in the index. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.3.1.14 | ColumntelProdNpMonIfcPPPNCPBCPStTermAckTx | read-only | mandatory | Number of Terminate Ack NCP frames transmitted through the interface number shown in the index. |