TELDAT-MON-INTERF-WLAN-MIB
101 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| SNMPv2-TC | DisplayString MacAddress TEXTUAL-CONVENTION |
| TELDAT-SW-STRUCTURE-MIB | telProdNpMonInterfRouter |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2007.4.1.2.2.2.24 | NodetelProdNpMonInterfWlan | |||
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.1 | TabletelProdNpMonInterfWlanRadioTable | not-accessible | mandatory | The telProdNpMonInterfWlanRadioTable contains information relating to the interfaces available on the system. Each entry corresponds to an available WLAN inter… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.1.1 | RowtelProdNpMonInterfWlanRadioEntry | not-accessible | mandatory | A base list of objects that are information about Wlan radio data. The index is the number of the interface |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.1.1.1 | ColumntelProdNpMonInterfWlanRadioIfIndex | read-only | mandatory | Unique radio index. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.1.1.2 | ColumntelProdNpMonInterfWlanRadioIfMode | read-only | mandatory | Mixed and compatibility modes between various 802.11 substandards. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.1.1.3 | ColumntelProdNpMonInterfWlanRadioIfSpeed | read-only | mandatory | The value defines the bitrate or the coding scheme to use for data frames. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.1.1.4 | ColumntelProdNpMonInterfWlanRadioIfChannel | read-only | mandatory | The physical channel |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.1.1.5 | ColumntelProdNpMonInterfWlanRadioIfRtsThreshold | read-only | mandatory | This attribute shall indicate the number of octets in an MPDU, below which an RTS/CTS handshake shall not be performed, except as RTS/CTS is used as a cross mo… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.1.1.6 | ColumntelProdNpMonInterfWlanRadioIfTxPower | read-only | mandatory | Transmitter output power in dBm. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.1.1.7 | ColumntelProdNpMonInterfWlanRadioIfBand | read-only | mandatory | Frequency band. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.1.1.8 | ColumntelProdNpMonInterfWlanRadioIfCountry | read-only | mandatory | This attribute identifies the country in which the station is operating. The first two octets of this string is the two character country code as described in … |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.1.1.9 | ColumntelProdNpMonInterfWlanRadioIfAddress | read-only | mandatory | The MAC Address. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.1.1.10 | ColumntelProdNpMonInterfWlanRadioIfRealChannel | read-only | mandatory | The actually selected channel for transmit and receive. In most cases this is the same value as wlanIfChannel, except if automatic channel selection is active.… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.1.1.11 | ColumntelProdNpMonInterfWlanRadioIfFragmentThreshold | read-only | mandatory | This attribute shall specify the mandatory maximum size, in octets, of the PSDU that may be delivered to the PHY. This maximum size does not apply in the case … |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.2 | TabletelProdNpMonInterfWlanBSSTable | not-accessible | mandatory | Describes a WLAN VSS and the corresponding settings |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1 | RowtelProdNpMonInterfWlanBSSEntry | not-accessible | mandatory | A base list of objects that are information about BSS data. The index is the number of the interface |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.1 | ColumntelProdNpMonInterfWlanBSSIfIndex | read-only | mandatory | Unique BSS index. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.2 | ColumntelProdNpMonInterfWlanBSSId | read-only | mandatory | This attribute reflects the SSID. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.3 | ColumntelProdNpMonInterfWlanBSSPrivInvoked | read-only | mandatory | Privacy invoked. If enabled, some level of security is invoked when transmitting data frames. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.4 | ColumntelProdNpMonInterfWlanBSSRsn | read-only | mandatory | The Robust Security Network setting. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.5 | ColumntelProdNpMonInterfWlanBSSAkm | read-only | mandatory | The Authenticated Key Management setting. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.6 | ColumntelProdNpMonInterfWlanBSSCipher | read-only | mandatory | The ciphers in use for WPA or WPA2. auto(1) is used for TKIP and AES |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.7 | ColumntelProdNpMonInterfWlanBSSDefaultKey | read-only | mandatory | Default key for WEP encryption. This is the key used to transmit data frames if WEP is enabled |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.8 | ColumntelProdNpMonInterfWlanBSSKey1 | read-only | mandatory | Key string for WEP key number 1. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.9 | ColumntelProdNpMonInterfWlanBSSKey2 | read-only | mandatory | Key string for WEP key number 2. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.10 | ColumntelProdNpMonInterfWlanBSSKey3 | read-only | mandatory | Key string for WEP key number 3. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.11 | ColumntelProdNpMonInterfWlanBSSKey4 | read-only | mandatory | Key string for WEP key number 4. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.12 | ColumntelProdNpMonInterfWlanBSSMaxAsoc | read-only | mandatory | The number of allowed clients of the requested BSS. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.13 | ColumntelProdNpMonInterfWlanBSSAcl | read-only | mandatory | MAC Media Access Control via MAC Address. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.14 | ColumntelProdNpMonInterfWlanBSSClientIsolation | read-only | mandatory | Client isolation setting. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.15 | ColumntelProdNpMonInterfWlanBSSHidden | read-only | mandatory | Define whether SSID is hidden (yes(2)) or not (no(1)). |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.16 | ColumntelProdNpMonInterfWlanBSSBssId | read-only | mandatory | This object contains the actual current BSSID for the service set. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.17 | ColumntelProdNpMonInterfWlanBSSBeaconPeriod | read-only | mandatory | This attribute shall specify the number of TU that a station shall use for scheduling Beacon transmissions. This value is transmitted in Beacon and Probe Respo… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.18 | ColumntelProdNpMonInterfWlanBSSDTIMPeriod | read-only | mandatory | This attribute shall specify the number of beacon intervals that shall elapse between transmission of Beacons frames containing a TIM element whose DTIM Count … |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.19 | ColumntelProdNpMonInterfWlanBSSMSDUTx | read-only | mandatory | This attribute counts the total number of packets transmitted on this BSS. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.20 | ColumntelProdNpMonInterfWlanBSSMSDURx | read-only | mandatory | This attribute counts the total number of packets received by this BSS. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.21 | ColumntelProdNpMonInterfWlanBSSBytesTx | read-only | mandatory | Transmitted Bytes. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.22 | ColumntelProdNpMonInterfWlanBSSBytesRx | read-only | mandatory | Received Bytes. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.23 | ColumntelProdNpMonInterfWlanBSSCurrent | read-only | mandatory | Count of current associated stations |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.24 | ColumntelProdNpMonInterfWlanBSSOpMode | read-only | mandatory | This value specify that the scan properties is used for AP, client or wds. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.25 | ColumntelProdNpMonInterfwlanBSSPassPhrase | read-only | mandatory | Passphrase string for WPA-PSK and WPA2-PSK. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.3 | TabletelProdNpMonInterfWlanStationTable | not-accessible | mandatory | The telProdNpMonInterfWlanStation contains information relating to the clients currently associated to our access points. Each entry corresponds to an associat… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.3.1 | RowtelProdNpMonInterfWlanStationEntry | not-accessible | mandatory | A base list of objects that are information about stations. The index is the number of the interface and the MAC address of the station |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.3.1.1 | ColumntelProdNpMonInterfWlanStationIfIndex | read-only | mandatory | Interface number. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.3.1.2 | ColumntelProdNpMonInterfWlanStationAddress | read-only | mandatory | MAC Address of the Assigned STA. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.3.1.3 | ColumntelProdNpMonInterfWlanStationState | read-only | mandatory | Station state. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.3.1.4 | ColumntelProdNpMonInterfWlanStationSecurity | read-only | mandatory | The Security Option of the Station. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.3.1.5 | ColumntelProdNpMonInterfWlanStationNode | read-only | mandatory | The Node type of the Station. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.3.1.6 | ColumntelProdNpMonInterfWlanStationMSDUTx | read-only | mandatory | This attribute counts the total number of packets transmitted to this station. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.3.1.7 | ColumntelProdNpMonInterfWlanStationMSDURx | read-only | mandatory | This attribute counts the total number of packets received from this station. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.3.1.8 | ColumntelProdNpMonInterfWlanStationBytesTx | read-only | mandatory | This attribute counts the total number of octets transmitted to this station. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.3.1.9 | ColumntelProdNpMonInterfWlanStationBytesRx | read-only | mandatory | This attribute counts the total number of octets received from this station. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.3.1.10 | ColumntelProdNpMonInterfWlanStationRate | read-only | mandatory | This attribute reflects the data rate of the latest packet received from this station, in 500 kbps units. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.3.1.11 | ColumntelProdNpMonInterfWlanStationSignal | read-only | mandatory | This attribute shows the received signal strength in dBm. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.3.1.12 | ColumntelProdNpMonInterfWlanStationNoise | read-only | mandatory | This attribute shows the measured noise level in dBm, or 0 if no connection can be established. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.3.1.13 | ColumntelProdNpMonInterfWlanStationConnectTime | read-only | mandatory | This attribute records the system uptime at the moment the client successfully finished association. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.4 | TabletelProdNpMonInterfWlanACLTable | not-accessible | mandatory | The WLAN Access List based on MAC Addresses |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.4.1 | RowtelProdNpMonInterfWlanACLEntry | not-accessible | mandatory | The WLAN Access List based on MAC Addresses entry. Index: telProdNpMonInterfWlanACLIfIndex telProdNpMonInterfWlanACLAddress. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.4.1.1 | ColumntelProdNpMonInterfWlanACLIfIndex | read-only | mandatory | The Interface the MAC Address belongs. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.4.1.2 | ColumntelProdNpMonInterfWlanACLAddress | read-only | mandatory | The MAC Address for the accepted client |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.5 | TabletelProdNpMonInterfWlanScanResultsTable | not-accessible | mandatory | This table contains the list of BSS entries found by foreground or background scanning in client mode. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.5.1 | RowtelProdNpMonInterfWlanScanResultsEntry | not-accessible | mandatory | A entry of the table. Index: telProdNpMonInterfWlanScanResultsIfIndex, telProdNpMonInterfWlanScanResultsIndex |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.5.1.1 | ColumntelProdNpMonInterfWlanScanResultsIfIndex | read-only | mandatory | ifIndex of the WLAN Interface the scan results belong to. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.5.1.2 | ColumntelProdNpMonInterfWlanScanResultsIndex | read-only | mandatory | Auxiliary index for different BSS entries. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.5.1.3 | ColumntelProdNpMonInterfWlanScanResultsBSSID | read-only | mandatory | BSSID of this BSS. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.5.1.4 | ColumntelProdNpMonInterfWlanScanResultsSSID | read-only | mandatory | SSID aka network name of this BSS. If broadcasting of SSID is disabled on this BSS, this string may be empty. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.5.1.5 | ColumntelProdNpMonInterfWlanScanResultsChannel | read-only | mandatory | The channel this BSS was received on. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.5.1.6 | ColumntelProdNpMonInterfWlanScanResultsSignal | read-only | mandatory | Receive signal strength of this BSS. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.5.1.7 | ColumntelProdNpMonInterfWlanScanResultsNoise | read-only | mandatory | This attribute shows the measured noise level in dBm, or 0 when this value is not available. It's the value measured during the last reception of data. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.5.1.8 | ColumntelProdNpMonInterfWlanScanResultsBeaconPeriod | read-only | mandatory | This attribute contains the number of TU that this BSS uses for scheduling Beacon transmissions. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.5.1.9 | ColumntelProdNpMonInterfWlanScanResultsRates | read-only | mandatory | This attribute contains one octet for each supported rate in this BSS, in Mbps units. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.5.1.10 | ColumntelProdNpMonInterfWlanScanResultsBasicRates | read-only | mandatory | This attribute contains one octet for each required basic rate in this BSS, in Mbps units. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.5.1.11 | ColumntelProdNpMonInterfWlanScanResultsExtendedRates | read-only | mandatory | This attribute contains one octet for each supported extended rate in this BSS, in Mbps units. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.6 | TabletelProdNpMonInterfWlanWMMTable | not-accessible | mandatory | Describes a WLAN WMM Access category settings |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.6.1 | RowtelProdNpMonInterfWlanWMMEntry | not-accessible | mandatory | A entry of the table. Index: telProdNpMonInterfWlanWMMAccCat, telProdNpMonInterfWlanWMMwlanIf, telProdNpMonInterfWlanWMMType |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.6.1.1 | ColumntelProdNpMonInterfWlanWMMwlanIf | read-only | mandatory | Radio index the AC belongs to. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.6.1.2 | ColumntelProdNpMonInterfWlanWMMAccCat | read-only | mandatory | Access category type, each category is mandatory for a wlanIf. An access category (AC) is a label for the common set of enhanced distributed channel access (ED… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.6.1.3 | ColumntelProdNpMonInterfWlanWMMType | read-only | mandatory | Type to which this telProdNpMonInterfWlanWMMEntry corresponds. Type access-point means the own parameters for WMM are changed. The entries with type station wi… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.6.1.4 | ColumntelProdNpMonInterfWlanWMMaCWmin | read-only | mandatory | Minimum size of contention window. for AC_BK and AC_BE telProdNpMonInterfWlanWMMaCWmin = telProdNpMonInterfWlanIfCWmin, for AC_VI telProdNpMonInterfWlanWMMaCWm… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.6.1.5 | ColumntelProdNpMonInterfWlanWMMaCWmax | read-only | mandatory | Maximum size of contention window. for AC_BK telProdNpMonInterfWlanWMMaCWmax = telProdNpMonInterfWlanIfCWmax, for AC_BE telProdNpMonInterfWlanWMMaCWmax = 4*tel… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.6.1.6 | ColumntelProdNpMonInterfWlanWMMAifsn | read-only | mandatory | Arbitration Inter-Frame Space Number (AIFSN) for this Access category. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.6.1.7 | ColumntelProdNpMonInterfWlanWMMTxopLimit | read-only | mandatory | 802.11 mode Transmit Opportunity Limit. The TxopLimit value is given in units of 32 microseconds. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.6.1.8 | ColumntelProdNpMonInterfWlanWMMAckPolicy | read-only | mandatory | Ack policy for this Access category (default value is 'ack(1)'). |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.6.1.9 | ColumntelProdNpMonInterfWlanWMMACM | read-only | mandatory | ACM (admission control) policy for this Access category i (default value is 'disabled(2)'). |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.7 | TabletelProdNpMonInterfWlanClientTable | not-accessible | mandatory | Describes a WLAN Client and the corresponding settings |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.7.1 | RowtelProdNpMonInterfwlanClientEntry | not-accessible | mandatory | A base list of objects with information about the networks the WLAN can connect to when acting as a client. The indexes are the number of the WLAN interface an… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.7.1.1 | ColumntelProdNpMonInterfWlanClientIfIndex | read-only | mandatory | WLAN interface index. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.7.1.2 | ColumntelProdNpMonInterfWlanClientSSID | read-only | mandatory | The Service Set Name |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.7.1.3 | ColumntelProdNpMonInterfWlanClientPriority | read-only | mandatory | Priority of the network. The higher the priority, the sooner the client tries to associate with it. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.7.1.4 | ColumntelProdNpMonInterfWlanClientPrivInvoked | read-only | mandatory | Privacy invoked. If enabled, some level of security is invoked when transmitting data frames. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.7.1.5 | ColumntelProdNpMonInterfWlanClientRsn | read-only | mandatory | The Robust Security Network settings. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.7.1.6 | ColumntelProdNpMonInterfWlanClientAkm | read-only | mandatory | The Authenticated Key Management setting. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.7.1.7 | ColumntelProdNpMonInterfWlanClientCipher | read-only | mandatory | The ciphers in use for WPA or WPA2. auto(1) is used for TKIP and AES |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.7.1.8 | ColumntelProdNpMonInterfWlanClientDefaultKey | read-only | mandatory | Default key for WEP encryption. This is the key used to transmit data frames if WEP is enabled |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.7.1.9 | ColumntelProdNpMonInterfWlanClientKey1 | read-only | mandatory | Key string for WEP key number 1. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.7.1.10 | ColumntelProdNpMonInterfWlanClientKey2 | read-only | mandatory | Key string for WEP key number 2. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.7.1.11 | ColumntelProdNpMonInterfWlanClientKey3 | read-only | mandatory | Key string for WEP key number 3. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.7.1.12 | ColumntelProdNpMonInterfWlanClientKey4 | read-only | mandatory | Key string for WEP key number 4. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.7.1.13 | ColumntelProdNpMonInterfwlanClientPassPhrase | read-only | mandatory | Passphrase string for WPA-PSK and WPA2-PSK. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| WlanRate | INTEGER (0..600) | mandatory | This type is used to represent WLAN data rates in 500 Kbps units. |
| WlanRSSI | INTEGER (-110..0) | mandatory | This type is used to represent receiver input levels in dBm. |