TELDAT-TRAP-SCAD-MIB
143 objects
This Module Information Base file is defined for managing received SNMP notifications generated by the SCAD event subsystem.
Imported Objects
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString |
| TELDAT-MIB | telEventTraps |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2007.1.4.178 | IdentityscadTrapsMIB | This Module Information Base file is defined for managing received SNMP notifications generated by the SCAD event subsystem. | ||
| 1.3.6.1.4.1.2007.1.4.178.1 | NodescadEventsGroup | |||
| 1.3.6.1.4.1.2007.1.4.178.1.1 | IdentityscadEventObjects1 | current | Event SCAD.1 Data has been received from Serial Terminal. | |
| 1.3.6.1.4.1.2007.1.4.178.1.1.1 | Scalarscad1-bytes-number | accessible-for-notify | current | Parameter 'bytes-number' in event SCAD.1 |
| 1.3.6.1.4.1.2007.1.4.178.1.1.2 | Scalarscad1-interface | accessible-for-notify | current | Parameter 'interface' in event SCAD.1 |
| 1.3.6.1.4.1.2007.1.4.178.1.2 | IdentityscadEventObjects2 | current | Event SCAD.2 One OK Message has been received from Serial Terminal. | |
| 1.3.6.1.4.1.2007.1.4.178.1.2.1 | Scalarscad2-coment | accessible-for-notify | current | Parameter 'coment' in event SCAD.2 |
| 1.3.6.1.4.1.2007.1.4.178.1.2.2 | Scalarscad2-serrial-address | accessible-for-notify | current | Parameter 'serrial-address' in event SCAD.2 |
| 1.3.6.1.4.1.2007.1.4.178.1.2.3 | Scalarscad2-bytes-number | accessible-for-notify | current | Parameter 'bytes-number' in event SCAD.2 |
| 1.3.6.1.4.1.2007.1.4.178.1.2.4 | Scalarscad2-interface | accessible-for-notify | current | Parameter 'interface' in event SCAD.2 |
| 1.3.6.1.4.1.2007.1.4.178.1.2.5 | Scalarscad2-state | accessible-for-notify | current | Parameter 'state' in event SCAD.2 |
| 1.3.6.1.4.1.2007.1.4.178.1.3 | IdentityscadEventObjects3 | current | Event SCAD.3 A Message with bad address has been received from Serial Terminal. | |
| 1.3.6.1.4.1.2007.1.4.178.1.3.1 | Scalarscad3-bad-addr | accessible-for-notify | current | Parameter 'bad-addr' in event SCAD.3 |
| 1.3.6.1.4.1.2007.1.4.178.1.3.2 | Scalarscad3-interface | accessible-for-notify | current | Parameter 'interface' in event SCAD.3 |
| 1.3.6.1.4.1.2007.1.4.178.1.4 | IdentityscadEventObjects4 | current | Event SCAD.4 One Bad Message has been received from Serial Terminal. | |
| 1.3.6.1.4.1.2007.1.4.178.1.4.1 | Scalarscad4-cause | accessible-for-notify | current | Parameter 'cause' in event SCAD.4 |
| 1.3.6.1.4.1.2007.1.4.178.1.4.2 | Scalarscad4-interface | accessible-for-notify | current | Parameter 'interface' in event SCAD.4 |
| 1.3.6.1.4.1.2007.1.4.178.1.4.3 | Scalarscad4-state | accessible-for-notify | current | Parameter 'state' in event SCAD.4 |
| 1.3.6.1.4.1.2007.1.4.178.1.5 | IdentityscadEventObjects5 | current | Event SCAD.5 A message with LRC/CRC error has been received from Serial Terminal. | |
| 1.3.6.1.4.1.2007.1.4.178.1.5.1 | Scalarscad5-interface | accessible-for-notify | current | Parameter 'interface' in event SCAD.5 |
| 1.3.6.1.4.1.2007.1.4.178.1.5.2 | Scalarscad5-state | accessible-for-notify | current | Parameter 'state' in event SCAD.5 |
| 1.3.6.1.4.1.2007.1.4.178.1.6 | IdentityscadEventObjects6 | current | Event SCAD.6 A message with error has been received from Remote. | |
| 1.3.6.1.4.1.2007.1.4.178.1.6.1 | Scalarscad6-error-type | accessible-for-notify | current | Parameter 'error-type' in event SCAD.6 |
| 1.3.6.1.4.1.2007.1.4.178.1.6.2 | Scalarscad6-interface | accessible-for-notify | current | Parameter 'interface' in event SCAD.6 |
| 1.3.6.1.4.1.2007.1.4.178.1.6.3 | Scalarscad6-state | accessible-for-notify | current | Parameter 'state' in event SCAD.6 |
| 1.3.6.1.4.1.2007.1.4.178.1.7 | IdentityscadEventObjects7 | current | Event SCAD.7 Addres received from Serial Terminal is not included in configuration registers list. | |
| 1.3.6.1.4.1.2007.1.4.178.1.7.1 | Scalarscad7-serial-address | accessible-for-notify | current | Parameter 'serial-address' in event SCAD.7 |
| 1.3.6.1.4.1.2007.1.4.178.1.7.2 | Scalarscad7-interface | accessible-for-notify | current | Parameter 'interface' in event SCAD.7 |
| 1.3.6.1.4.1.2007.1.4.178.1.8 | IdentityscadEventObjects8 | current | Event SCAD.8 It's trying the connection against remote IP and P port. | |
| 1.3.6.1.4.1.2007.1.4.178.1.8.1 | Scalarscad8-serial-address | accessible-for-notify | current | Parameter 'serial-address' in event SCAD.8 |
| 1.3.6.1.4.1.2007.1.4.178.1.8.2 | Scalarscad8-rtu-ip-address | accessible-for-notify | current | Parameter 'rtu-ip-address' in event SCAD.8 |
| 1.3.6.1.4.1.2007.1.4.178.1.8.3 | Scalarscad8-port | accessible-for-notify | current | Parameter 'port' in event SCAD.8 |
| 1.3.6.1.4.1.2007.1.4.178.1.8.4 | Scalarscad8-interface | accessible-for-notify | current | Parameter 'interface' in event SCAD.8 |
| 1.3.6.1.4.1.2007.1.4.178.1.9 | IdentityscadEventObjects9 | current | Event SCAD.9 The Transfer has been completed successfully. | |
| 1.3.6.1.4.1.2007.1.4.178.1.9.1 | Scalarscad9-interface | accessible-for-notify | current | Parameter 'interface' in event SCAD.9 |
| 1.3.6.1.4.1.2007.1.4.178.1.10 | IdentityscadEventObjects10 | current | Event SCAD.10 Trying to send message to Remote end. | |
| 1.3.6.1.4.1.2007.1.4.178.1.10.1 | Scalarscad10-bytes | accessible-for-notify | current | Parameter 'bytes' in event SCAD.10 |
| 1.3.6.1.4.1.2007.1.4.178.1.10.2 | Scalarscad10-interface | accessible-for-notify | current | Parameter 'interface' in event SCAD.10 |
| 1.3.6.1.4.1.2007.1.4.178.1.11 | IdentityscadEventObjects11 | current | Event SCAD.11 A message from Remote end has been received. | |
| 1.3.6.1.4.1.2007.1.4.178.1.11.1 | Scalarscad11-message-type | accessible-for-notify | current | Parameter 'message-type' in event SCAD.11 |
| 1.3.6.1.4.1.2007.1.4.178.1.11.2 | Scalarscad11-bytes | accessible-for-notify | current | Parameter 'bytes' in event SCAD.11 |
| 1.3.6.1.4.1.2007.1.4.178.1.11.3 | Scalarscad11-interface | accessible-for-notify | current | Parameter 'interface' in event SCAD.11 |
| 1.3.6.1.4.1.2007.1.4.178.1.11.4 | Scalarscad11-state | accessible-for-notify | current | Parameter 'state' in event SCAD.11 |
| 1.3.6.1.4.1.2007.1.4.178.1.12 | IdentityscadEventObjects12 | current | Event SCAD.12 A TCP Packet has been received. | |
| 1.3.6.1.4.1.2007.1.4.178.1.12.1 | Scalarscad12-message-type | accessible-for-notify | current | Parameter 'message-type' in event SCAD.12 |
| 1.3.6.1.4.1.2007.1.4.178.1.12.2 | Scalarscad12-bytes | accessible-for-notify | current | Parameter 'bytes' in event SCAD.12 |
| 1.3.6.1.4.1.2007.1.4.178.1.12.3 | Scalarscad12-foreign-host | accessible-for-notify | current | Parameter 'foreign-host' in event SCAD.12 |
| 1.3.6.1.4.1.2007.1.4.178.1.12.4 | Scalarscad12-remote-port | accessible-for-notify | current | Parameter 'remote-port' in event SCAD.12 |
| 1.3.6.1.4.1.2007.1.4.178.1.13 | IdentityscadEventObjects13 | current | Event SCAD.13 The TCP session has been closed. | |
| 1.3.6.1.4.1.2007.1.4.178.1.13.1 | Scalarscad13-foreign-host | accessible-for-notify | current | Parameter 'foreign-host' in event SCAD.13 |
| 1.3.6.1.4.1.2007.1.4.178.1.13.2 | Scalarscad13-remote-port | accessible-for-notify | current | Parameter 'remote-port' in event SCAD.13 |
| 1.3.6.1.4.1.2007.1.4.178.1.14 | IdentityscadEventObjects14 | current | Event SCAD.14 The TCP session has been closed by the Remote end. | |
| 1.3.6.1.4.1.2007.1.4.178.1.14.1 | Scalarscad14-foreign-host | accessible-for-notify | current | Parameter 'foreign-host' in event SCAD.14 |
| 1.3.6.1.4.1.2007.1.4.178.1.14.2 | Scalarscad14-remote-port | accessible-for-notify | current | Parameter 'remote-port' in event SCAD.14 |
| 1.3.6.1.4.1.2007.1.4.178.1.15 | IdentityscadEventObjects15 | current | Event SCAD.15 The TCP session has been opened by the Remote end. | |
| 1.3.6.1.4.1.2007.1.4.178.1.15.1 | Scalarscad15-remote-ip | accessible-for-notify | current | Parameter 'remote-ip' in event SCAD.15 |
| 1.3.6.1.4.1.2007.1.4.178.1.15.2 | Scalarscad15-remote-port | accessible-for-notify | current | Parameter 'remote-port' in event SCAD.15 |
| 1.3.6.1.4.1.2007.1.4.178.1.16 | IdentityscadEventObjects16 | current | Event SCAD.16 A Message has been transmitted to Serial Terminal. | |
| 1.3.6.1.4.1.2007.1.4.178.1.16.1 | Scalarscad16-address | accessible-for-notify | current | Parameter 'address' in event SCAD.16 |
| 1.3.6.1.4.1.2007.1.4.178.1.16.2 | Scalarscad16-bytes | accessible-for-notify | current | Parameter 'bytes' in event SCAD.16 |
| 1.3.6.1.4.1.2007.1.4.178.1.16.3 | Scalarscad16-interface | accessible-for-notify | current | Parameter 'interface' in event SCAD.16 |
| 1.3.6.1.4.1.2007.1.4.178.1.16.4 | Scalarscad16-state | accessible-for-notify | current | Parameter 'state' in event SCAD.16 |
| 1.3.6.1.4.1.2007.1.4.178.1.17 | IdentityscadEventObjects17 | current | Event SCAD.17 A change ON/OFF has been detected in Serial Control Signal Input. | |
| 1.3.6.1.4.1.2007.1.4.178.1.17.1 | Scalarscad17-message-type | accessible-for-notify | current | Parameter 'message-type' in event SCAD.17 |
| 1.3.6.1.4.1.2007.1.4.178.1.17.2 | Scalarscad17-interface | accessible-for-notify | current | Parameter 'interface' in event SCAD.17 |
| 1.3.6.1.4.1.2007.1.4.178.1.17.3 | Scalarscad17-state | accessible-for-notify | current | Parameter 'state' in event SCAD.17 |
| 1.3.6.1.4.1.2007.1.4.178.1.18 | IdentityscadEventObjects18 | current | Event SCAD.18 Timeout has occur waiting data. | |
| 1.3.6.1.4.1.2007.1.4.178.1.18.1 | Scalarscad18-site | accessible-for-notify | current | Parameter 'site' in event SCAD.18 |
| 1.3.6.1.4.1.2007.1.4.178.1.18.2 | Scalarscad18-interface | accessible-for-notify | current | Parameter 'interface' in event SCAD.18 |
| 1.3.6.1.4.1.2007.1.4.178.1.18.3 | Scalarscad18-state | accessible-for-notify | current | Parameter 'state' in event SCAD.18 |
| 1.3.6.1.4.1.2007.1.4.178.1.19 | IdentityscadEventObjects19 | current | Event SCAD.19 A packet was lost, due TCP Tx overrun error. | |
| 1.3.6.1.4.1.2007.1.4.178.1.19.1 | Scalarscad19-interface | accessible-for-notify | current | Parameter 'interface' in event SCAD.19 |
| 1.3.6.1.4.1.2007.1.4.178.1.19.2 | Scalarscad19-state | accessible-for-notify | current | Parameter 'state' in event SCAD.19 |
| 1.3.6.1.4.1.2007.1.4.178.1.20 | IdentityscadEventObjects20 | current | Event SCAD.20 A packet was lost, due TCP is closed. | |
| 1.3.6.1.4.1.2007.1.4.178.1.20.1 | Scalarscad20-interface | accessible-for-notify | current | Parameter 'interface' in event SCAD.20 |
| 1.3.6.1.4.1.2007.1.4.178.1.20.2 | Scalarscad20-state | accessible-for-notify | current | Parameter 'state' in event SCAD.20 |
| 1.3.6.1.4.1.2007.1.4.178.1.21 | IdentityscadEventObjects21 | current | Event SCAD.21 The transfer has been wrong against specified NA and IP addr. | |
| 1.3.6.1.4.1.2007.1.4.178.1.21.1 | Scalarscad21-na | accessible-for-notify | current | Parameter 'na' in event SCAD.21 |
| 1.3.6.1.4.1.2007.1.4.178.1.21.2 | Scalarscad21-ip-host-address | accessible-for-notify | current | Parameter 'ip-host-address' in event SCAD.21 |
| 1.3.6.1.4.1.2007.1.4.178.1.21.3 | Scalarscad21-cause | accessible-for-notify | current | Parameter 'cause' in event SCAD.21 |
| 1.3.6.1.4.1.2007.1.4.178.1.21.4 | Scalarscad21-interface | accessible-for-notify | current | Parameter 'interface' in event SCAD.21 |
| 1.3.6.1.4.1.2007.1.4.178.1.22 | IdentityscadEventObjects22 | current | Event SCAD.22 TCP generic event was occurred. | |
| 1.3.6.1.4.1.2007.1.4.178.1.22.1 | Scalarscad22-event | accessible-for-notify | current | Parameter 'event' in event SCAD.22 |
| 1.3.6.1.4.1.2007.1.4.178.1.22.2 | Scalarscad22-ip | accessible-for-notify | current | Parameter 'ip' in event SCAD.22 |
| 1.3.6.1.4.1.2007.1.4.178.1.22.3 | Scalarscad22-port | accessible-for-notify | current | Parameter 'port' in event SCAD.22 |
| 1.3.6.1.4.1.2007.1.4.178.1.23 | IdentityscadEventObjects23 | current | Event SCAD.23 A change ON/OFF has been make in Serial Control Signal Output. | |
| 1.3.6.1.4.1.2007.1.4.178.1.23.1 | Scalarscad23-message-type | accessible-for-notify | current | Parameter 'message-type' in event SCAD.23 |
| 1.3.6.1.4.1.2007.1.4.178.1.23.2 | Scalarscad23-interface | accessible-for-notify | current | Parameter 'interface' in event SCAD.23 |
| 1.3.6.1.4.1.2007.1.4.178.1.23.3 | Scalarscad23-state | accessible-for-notify | current | Parameter 'state' in event SCAD.23 |
| 1.3.6.1.4.1.2007.1.4.178.1.24 | IdentityscadEventObjects24 | current | Event SCAD.24 Data error from Serial Terminal has been received. | |
| 1.3.6.1.4.1.2007.1.4.178.1.24.1 | Scalarscad24-message-type | accessible-for-notify | current | Parameter 'message-type' in event SCAD.24 |
| 1.3.6.1.4.1.2007.1.4.178.1.24.2 | Scalarscad24-interface | accessible-for-notify | current | Parameter 'interface' in event SCAD.24 |
| 1.3.6.1.4.1.2007.1.4.178.1.24.3 | Scalarscad24-state | accessible-for-notify | current | Parameter 'state' in event SCAD.24 |
| 1.3.6.1.4.1.2007.1.4.178.1.25 | IdentityscadEventObjects25 | current | Event SCAD.25 TCP Listen has been closed, due max session number has been reached. | |
| 1.3.6.1.4.1.2007.1.4.178.1.25.1 | Scalarscad25-port | accessible-for-notify | current | Parameter 'port' in event SCAD.25 |
| 1.3.6.1.4.1.2007.1.4.178.1.26 | IdentityscadEventObjects26 | current | Event SCAD.26 An input TCP session has been rejet. | |
| 1.3.6.1.4.1.2007.1.4.178.1.26.1 | Scalarscad26-event | accessible-for-notify | current | Parameter 'event' in event SCAD.26 |
| 1.3.6.1.4.1.2007.1.4.178.1.26.2 | Scalarscad26-ip | accessible-for-notify | current | Parameter 'ip' in event SCAD.26 |
| 1.3.6.1.4.1.2007.1.4.178.1.26.3 | Scalarscad26-port | accessible-for-notify | current | Parameter 'port' in event SCAD.26 |
| 1.3.6.1.4.1.2007.1.4.178.1.27 | IdentityscadEventObjects27 | current | Event SCAD.27 Detailed Data send to serial interface. | |
| 1.3.6.1.4.1.2007.1.4.178.1.27.1 | Scalarscad27-interface | accessible-for-notify | current | Parameter 'interface' in event SCAD.27 |
| 1.3.6.1.4.1.2007.1.4.178.1.27.2 | Scalarscad27-serial-address | accessible-for-notify | current | Parameter 'serial-address' in event SCAD.27 |
| 1.3.6.1.4.1.2007.1.4.178.1.27.3 | Scalarscad27-lenght | accessible-for-notify | current | Parameter 'lenght' in event SCAD.27 |
| 1.3.6.1.4.1.2007.1.4.178.1.27.4 | Scalarscad27-hex-data | accessible-for-notify | current | Parameter 'hex-data' in event SCAD.27 |
| 1.3.6.1.4.1.2007.1.4.178.1.28 | IdentityscadEventObjects28 | current | Event SCAD.28 Detailed Data received from serial interface. | |
| 1.3.6.1.4.1.2007.1.4.178.1.28.1 | Scalarscad28-interface | accessible-for-notify | current | Parameter 'interface' in event SCAD.28 |
| 1.3.6.1.4.1.2007.1.4.178.1.28.2 | Scalarscad28-serial-address | accessible-for-notify | current | Parameter 'serial-address' in event SCAD.28 |
| 1.3.6.1.4.1.2007.1.4.178.1.28.3 | Scalarscad28-lenght | accessible-for-notify | current | Parameter 'lenght' in event SCAD.28 |
| 1.3.6.1.4.1.2007.1.4.178.1.28.4 | Scalarscad28-hex-data | accessible-for-notify | current | Parameter 'hex-data' in event SCAD.28 |
| 1.3.6.1.4.1.2007.1.4.178.1.29 | IdentityscadEventObjects29 | current | Event SCAD.29 Configured NSLA track has triggered. | |
| 1.3.6.1.4.1.2007.1.4.178.1.29.1 | Scalarscad29-state | accessible-for-notify | current | Parameter 'state' in event SCAD.29 |
| 1.3.6.1.4.1.2007.1.4.178.1.29.2 | Scalarscad29-interface | accessible-for-notify | current | Parameter 'interface' in event SCAD.29 |
| 1.3.6.1.4.1.2007.1.4.178.2 | NodescadNotifications | |||
| 1.3.6.1.4.1.2007.1.4.178.2.0 | NodescadNotificationsPrefix | |||
| 1.3.6.1.4.1.2007.1.4.178.2.0.1 | NotificationscadNotification1 | current | Notification of Event SCAD.1 Message: 'Rx Data from Serial Terminal $1 bytes, interface $2' Parameters list: $1: scad1-bytes-number $2: scad1-interface Data ha… | |
| 1.3.6.1.4.1.2007.1.4.178.2.0.2 | NotificationscadNotification2 | current | Notification of Event SCAD.2 Message: 'Rx Message$1 from Serial Terminal address $2, $3 bytes, interface $4 state $5' Parameters list: $1: scad2-coment $2: sca… | |
| 1.3.6.1.4.1.2007.1.4.178.2.0.3 | NotificationscadNotification3 | current | Notification of Event SCAD.3 Message: 'Rx Address error from Serial Terminal $1 bytes, interface $2' Parameters list: $1: scad3-bad-addr $2: scad3-interface A … | |
| 1.3.6.1.4.1.2007.1.4.178.2.0.4 | NotificationscadNotification4 | current | Notification of Event SCAD.4 Message: 'Rx Bad Message from Serial Terminal ($1), interface $2 state $3' Parameters list: $1: scad4-cause $2: scad4-interface $3… | |
| 1.3.6.1.4.1.2007.1.4.178.2.0.5 | NotificationscadNotification5 | current | Notification of Event SCAD.5 Message: 'A block with LRC/CRC error has been received from Serial Terminal, interface $1 state $2' Parameters list: $1: scad5-int… | |
| 1.3.6.1.4.1.2007.1.4.178.2.0.6 | NotificationscadNotification6 | current | Notification of Event SCAD.6 Message: 'A block with $1 error has been received from Serial Terminal, interface $2 state $3' Parameters list: $1: scad6-error-ty… | |
| 1.3.6.1.4.1.2007.1.4.178.2.0.7 | NotificationscadNotification7 | current | Notification of Event SCAD.7 Message: 'Address $1 received from Serial Terminal is not included in configuration regiters. Interface $2' Parameters list: $1: s… | |
| 1.3.6.1.4.1.2007.1.4.178.2.0.8 | NotificationscadNotification8 | current | Notification of Event SCAD.8 Message: 'Address $1 is trying the connection against IP $2 Host, Port $3, Interface $4' Parameters list: $1: scad8-serial-address… | |
| 1.3.6.1.4.1.2007.1.4.178.2.0.9 | NotificationscadNotification9 | current | Notification of Event SCAD.9 Message: 'The Transfer has been completed successfully. Interface $1' Parameters list: $1: scad9-interface The Transfer has been c… | |
| 1.3.6.1.4.1.2007.1.4.178.2.0.10 | NotificationscadNotification10 | current | Notification of Event SCAD.10 Message: 'Trying to send a message to Remote with $1 bytes. Interface $2' Parameters list: $1: scad10-bytes $2: scad10-interface … | |
| 1.3.6.1.4.1.2007.1.4.178.2.0.11 | NotificationscadNotification11 | current | Notification of Event SCAD.11 Message: 'A message from Remote of $1 type has been received, $2 bytes. Interface $3 state $4' Parameters list: $1: scad11-messag… | |
| 1.3.6.1.4.1.2007.1.4.178.2.0.12 | NotificationscadNotification12 | current | Notification of Event SCAD.12 Message: 'A TCP packet $1 has been received, $2 bytes. rem. IP: $3, Port: $4' Parameters list: $1: scad12-message-type $2: scad12… | |
| 1.3.6.1.4.1.2007.1.4.178.2.0.13 | NotificationscadNotification13 | current | Notification of Event SCAD.13 Message: 'The TCP session has been closed. rem. IP: $1, Port: $2' Parameters list: $1: scad13-foreign-host $2: scad13-remote-port… | |
| 1.3.6.1.4.1.2007.1.4.178.2.0.14 | NotificationscadNotification14 | current | Notification of Event SCAD.14 Message: 'The TCP session has been closed by the Remote end. rem. IP: $1, Port: $2' Parameters list: $1: scad14-foreign-host $2: … | |
| 1.3.6.1.4.1.2007.1.4.178.2.0.15 | NotificationscadNotification15 | current | Notification of Event SCAD.15 Message: 'The TCP session has been opened by the Remote end. Remote IP:$1 , Port: $2' Parameters list: $1: scad15-remote-ip $2: s… | |
| 1.3.6.1.4.1.2007.1.4.178.2.0.16 | NotificationscadNotification16 | current | Notification of Event SCAD.16 Message: 'Tx Message to Serial Terminal,address: $1, $2 bytes interface $3 state $4' Parameters list: $1: scad16-address $2: scad… | |
| 1.3.6.1.4.1.2007.1.4.178.2.0.17 | NotificationscadNotification17 | current | Notification of Event SCAD.17 Message: 'Serial Control Signal Imput change to $1, interface $2 state $3' Parameters list: $1: scad17-message-type $2: scad17-in… | |
| 1.3.6.1.4.1.2007.1.4.178.2.0.18 | NotificationscadNotification18 | current | Notification of Event SCAD.18 Message: 'Timeout waiting data from $1, interface $2 state $3' Parameters list: $1: scad18-site $2: scad18-interface $3: scad18-s… | |
| 1.3.6.1.4.1.2007.1.4.178.2.0.19 | NotificationscadNotification19 | current | Notification of Event SCAD.19 Message: 'Packet lost due TCP Tx overrun error. Interface $1 state $2' Parameters list: $1: scad19-interface $2: scad19-state A p… | |
| 1.3.6.1.4.1.2007.1.4.178.2.0.20 | NotificationscadNotification20 | current | Notification of Event SCAD.20 Message: 'Packet lost due TCP session is closes. Interface $1 state $2' Parameters list: $1: scad20-interface $2: scad20-state A … | |
| 1.3.6.1.4.1.2007.1.4.178.2.0.21 | NotificationscadNotification21 | current | Notification of Event SCAD.21 Message: 'The transfer has been wrong, against address $1, IP $2, Cause $3, interface $4' Parameters list: $1: scad21-na $2: scad… | |
| 1.3.6.1.4.1.2007.1.4.178.2.0.22 | NotificationscadNotification22 | current | Notification of Event SCAD.22 Message: 'The TCP event: $1 . Rem. IP: $2, rem. Port: $3' Parameters list: $1: scad22-event $2: scad22-ip $3: scad22-port TCP gen… | |
| 1.3.6.1.4.1.2007.1.4.178.2.0.23 | NotificationscadNotification23 | current | Notification of Event SCAD.23 Message: 'Serial Control Output change to $1, interface $2 state $3' Parameters list: $1: scad23-message-type $2: scad23-interfac… | |
| 1.3.6.1.4.1.2007.1.4.178.2.0.24 | NotificationscadNotification24 | current | Notification of Event SCAD.24 Message: 'Data ERROR from Serial Terminal has been received type: $1. Interface $2 state $3' Parameters list: $1: scad24-message-… | |
| 1.3.6.1.4.1.2007.1.4.178.2.0.25 | NotificationscadNotification25 | current | Notification of Event SCAD.25 Message: 'Max sessions number has been reached, port $1' Parameters list: $1: scad25-port TCP Listen has been closed, due max ses… | |
| 1.3.6.1.4.1.2007.1.4.178.2.0.26 | NotificationscadNotification26 | current | Notification of Event SCAD.26 Message: 'TCP inout session rejet: $1 . Rem. IP: $2, rem. Port: $3' Parameters list: $1: scad26-event $2: scad26-ip $3: scad26-po… | |
| 1.3.6.1.4.1.2007.1.4.178.2.0.27 | NotificationscadNotification27 | current | Notification of Event SCAD.27 Message: 'Data transmitted to serial interface $1 (addr:$2,$3 bytes):$4' Parameters list: $1: scad27-interface $2: scad27-serial-… | |
| 1.3.6.1.4.1.2007.1.4.178.2.0.28 | NotificationscadNotification28 | current | Notification of Event SCAD.28 Message: 'Data received from serial interface $1 (addr:$2,$3 bytes):$4' Parameters list: $1: scad28-interface $2: scad28-serial-a… | |
| 1.3.6.1.4.1.2007.1.4.178.2.0.29 | NotificationscadNotification29 | current | Notification of Event SCAD.29 Message: 'Track nsla triggered(state:$1) ifc $2' Parameters list: $1: scad29-state $2: scad29-interface Configured NSLA track has… |