TELDAT-WEBPROBE-MIB
68 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2007.4.58 | NodetelProductsWebProbe | |||
| 1.3.6.1.4.1.2007.4.58.1 | NodetelProductsWebProbeConfig | |||
| 1.3.6.1.4.1.2007.4.58.1.1 | TabletelProdWebProbeConfProbeTable | not-accessible | mandatory | This table contains all the configured Web probes. Each entry refers to a probe, and consists of the various essential parameters for it: the probe identifier,… |
| 1.3.6.1.4.1.2007.4.58.1.1.1 | RowtelProdWebProbeConfProbeEntry | not-accessible | mandatory | Each entry refers to a probe, and consists of the various essential parameters for it: the probe identifier, the address of the page where the probe must be in… |
| 1.3.6.1.4.1.2007.4.58.1.1.1.1 | ColumntelProdWebProbeConfProbeIndex | read-only | mandatory | Index of the table: probe identifier. |
| 1.3.6.1.4.1.2007.4.58.1.1.1.2 | ColumntelProdWebProbeConfProbeUrl | read-write | mandatory | The address of the Web page where the probe must be initially connected in order to initiate the speed measuring process. |
| 1.3.6.1.4.1.2007.4.58.1.1.1.3 | ColumntelProdWebProbeConfProbeEnable | read-write | mandatory | The value of this variable indicates if the probe is enabled or disabled, and a SET operation allows to enable/disable the probe whose identifier is specified … |
| 1.3.6.1.4.1.2007.4.58.1.1.1.4 | ColumntelProdWebProbeConfProbePeriodType | read-write | mandatory | This variable indicates the type of periodicity: (0) none, (1) minutes, (2) hours, (3) days, (4) months. The value 0 (none) indicates that the probe is not per… |
| 1.3.6.1.4.1.2007.4.58.1.1.1.5 | ColumntelProdWebProbeConfProbePeriodValue | read-write | mandatory | This variable indicates the value of the period, in minutes, hours, days or months depending on the type of periodicity configured, which is stored in the prev… |
| 1.3.6.1.4.1.2007.4.58.1.1.1.6 | ColumntelProdWebProbeConfProbeThreshold | read-write | mandatory | Minimum access speed value (in bits per second) below which the measurement is taken into account in order to generate an SNMP event (TRAP) 'Threshold not reac… |
| 1.3.6.1.4.1.2007.4.58.1.1.1.7 | ColumntelProdWebProbeConfProbeNPolls | read-write | mandatory | Number of consecutive measurements that must be produced with the speed below the configured threshold so an SNMP event (TRAP) 'Threshold not reached'. A measu… |
| 1.3.6.1.4.1.2007.4.58.1.1.1.8 | ColumntelProdWebProbeConfProbeEvent | read-write | mandatory | The value of this variable indicates if the 'Threshold not reached' TRAP generation is enabled or disabled, and a SET operation allows to enable/disable the se… |
| 1.3.6.1.4.1.2007.4.58.1.1.1.9 | ColumntelProdWebProbeConfProbeDelete | read-write | mandatory | If the value of this variable is set to 1, this entry will be deleted. In GET operations, the value taken by this variable indicates the result of the last ope… |
| 1.3.6.1.4.1.2007.4.58.1.1.1.10 | ColumntelProdWebProbeCfgProbeTimeout | read-write | mandatory | Timeout configured for this probe. |
| 1.3.6.1.4.1.2007.4.58.1.1.1.11 | ColumntelProdWebProbeCfgProbePageType | read-write | mandatory | The value of this variable indicates if the page to download is generic(1) or specific(2). If the page is generic, the content of the response is not parsed. I… |
| 1.3.6.1.4.1.2007.4.58.1.2 | ScalartelProdWebProbeConfUpdate | read-write | mandatory | If the value of this variable is set to 1, the configuration changes made since the system was last re-initialized will take effect. In GET operations, the val… |
| 1.3.6.1.4.1.2007.4.58.1.3 | ScalartelProdWebProbeConfTTrap | read-write | mandatory | Configures, in seconds, the periodicity of the PPP connection trap |
| 1.3.6.1.4.1.2007.4.58.1.4 | ScalartelProdWebProbeConfTCPwindow | read-write | mandatory | Configures the TCP window size used in the HTTP connections |
| 1.3.6.1.4.1.2007.4.58.1.5 | ScalartelProdWebProbeConfTCPmss | read-write | mandatory | Configures the TCP Maximum Segment Size(MSS) used in the HTTP connections |
| 1.3.6.1.4.1.2007.4.58.1.6 | ScalartelProdWebProbeConfMaxRedir | read-write | mandatory | Configures the maximum number of redirections allowed in the HTTP requests |
| 1.3.6.1.4.1.2007.4.58.2 | NodetelProductsWebProbeMonit | |||
| 1.3.6.1.4.1.2007.4.58.2.1 | TabletelProdWebProbeMonProbeTable | not-accessible | mandatory | This table contains the most relevant information about the periodic probes being executed. The parameters included in each entry are as follows: the probe ide… |
| 1.3.6.1.4.1.2007.4.58.2.1.1 | RowtelProdWebProbeMonProbeEntry | not-accessible | mandatory | Each entry consists of the following parameters: the probe identifier, the probe status, the address of the URL to which the probe is connected, the type of th… |
| 1.3.6.1.4.1.2007.4.58.2.1.1.1 | ColumntelProdWebProbeMonProbeIndex | read-only | mandatory | Index of the table: probe identifier. |
| 1.3.6.1.4.1.2007.4.58.2.1.1.2 | ColumntelProdWebProbeMonProbeStatus | read-only | mandatory | The probe state. It can be one of the following: waiting(1), pending-execution(2), executing(3), completed-ok(4), completed-with-error (5), request-required(6)… |
| 1.3.6.1.4.1.2007.4.58.2.1.1.3 | ColumntelProdWebProbeMonProbeUrl | read-only | mandatory | The address of the Web page or URL to which the probe is connected. |
| 1.3.6.1.4.1.2007.4.58.2.1.1.4 | ColumntelProdWebProbeMonProbeType | read-only | mandatory | This variable indicates if this probe is periodic(1) or immediate(2). If the status of probe is waiting(1), the value of this variable is 0 (probe-waiting). |
| 1.3.6.1.4.1.2007.4.58.2.1.1.5 | ColumntelProdWebProbeMonProbePeriodType | read-only | mandatory | This variable indicates the type of periodicity: (0) none, (1) minutes, (2) hours, (3) days, (4) months. The value 0 (none) indicates that the probe is not per… |
| 1.3.6.1.4.1.2007.4.58.2.1.1.6 | ColumntelProdWebProbeMonProbePeriodValue | read-only | mandatory | This variable indicates the value of the period, in minutes, hours, days or months depending on the type of periodicity used, which is stored in the previous v… |
| 1.3.6.1.4.1.2007.4.58.2.1.1.7 | ColumntelProdWebProbeMonProbeThreshold | read-only | mandatory | Speed threshold configured for the probe (in bits per second). |
| 1.3.6.1.4.1.2007.4.58.2.1.1.8 | ColumntelProdWebProbeMonProbeFailures | read-only | mandatory | Number of failures that have been produced in the probe, i.e. the number of consecutive times the measured speed has been below the configured threshold. When … |
| 1.3.6.1.4.1.2007.4.58.2.1.1.9 | ColumntelProdWebProbeMonProbeNPolls | read-only | mandatory | Number of failures permitted (number of consecutive times the measured speed can be below the configured threshold). When the number of failures produced is eq… |
| 1.3.6.1.4.1.2007.4.58.2.1.1.10 | ColumntelProdWebProbeMonProbeEvent | read-only | mandatory | The value of this variable indicates if the 'Threshold not reached' TRAP generation is enabled or disabled. This variable can take the values enabled (1) or di… |
| 1.3.6.1.4.1.2007.4.58.2.1.1.11 | ColumntelProdWebProbeMonProbeLastProbe | read-only | mandatory | The value of this variable indicates the type of the last probe: no-probe(0), periodic(1), immediate(2). |
| 1.3.6.1.4.1.2007.4.58.2.1.1.12 | ColumntelProdWebProbeMonProbeInitDate | read-only | mandatory | The date of the last connection produced. If no connection has yet been produced, this is shown as 0, and if the type of the last probe, which is stored in the… |
| 1.3.6.1.4.1.2007.4.58.2.1.1.13 | ColumntelProdWebProbeMonProbeInitTime | read-only | mandatory | The time when the last connection was produced. If no connection has yet been produced, this is shown as 0, and if the type of the last probe, which is stored … |
| 1.3.6.1.4.1.2007.4.58.2.1.1.14 | ColumntelProdWebProbeMonProbeLastSpeed | read-only | mandatory | Speed, in bits per second, measured in the last probe carried out. If the variable which indicates the type of the last probe takes the value 0 (no-probe), the… |
| 1.3.6.1.4.1.2007.4.58.2.1.1.15 | ColumntelProdWebProbeMonProbeNextDate | read-only | mandatory | The date when next connection must be started. If the probe is disabled or its type of periodicity is 0 (none), or its status is executing (2) or pending-execu… |
| 1.3.6.1.4.1.2007.4.58.2.1.1.16 | ColumntelProdWebProbeMonProbeNextTime | read-only | mandatory | The time when next connection must be started. If the probe is disabled or its type of periodicity is 0 (none), or its status is executing (2) or pending-execu… |
| 1.3.6.1.4.1.2007.4.58.2.1.1.17 | ColumntelProdWebProbeMonProbeChanUpdated | read-only | mandatory | The value of this variable indicates if the configuration changes have been updated. If no changes have produced, this variable will take the value 0 (no-chang… |
| 1.3.6.1.4.1.2007.4.58.2.1.1.18 | ColumntelProdWebProbeMonProbeConfChanges | read-only | mandatory | This variable indicates the changes made in configuration which have not been updated yet. The allowed values (possible changes) are: none(0), enabled-disabled… |
| 1.3.6.1.4.1.2007.4.58.2.1.1.19 | ColumntelProdWebProbeMonProbeTimeout | read-only | mandatory | Value of the timeout for this probe. |
| 1.3.6.1.4.1.2007.4.58.2.1.1.20 | ColumntelProdWebProbeMonProbePageType | read-only | mandatory | The value of this variable indicates if the page to download is generic(1) or specific(2). If the page is generic, the content of the response is not parsed. I… |
| 1.3.6.1.4.1.2007.4.58.2.2 | TabletelProdWebProbeMonStartTable | not-accessible | mandatory | This table allows to start the execution of the probe whose identifier takes the value given by the index. Each entry refers to one of the configured probes, a… |
| 1.3.6.1.4.1.2007.4.58.2.2.1 | RowtelProdWebProbeMonStartEntry | not-accessible | mandatory | Each entry refers to one of the configured probes, and consists of two variables: the identifier of the probe, which is the index of the table, and a variable … |
| 1.3.6.1.4.1.2007.4.58.2.2.1.1 | ColumntelProdWebProbeMonStartIndex | read-only | mandatory | Index of the table: probe identifier. |
| 1.3.6.1.4.1.2007.4.58.2.2.1.2 | ColumntelProdWebProbeMonStartCommand | read-write | mandatory | If the value of this variable is set to 1, the execution of the probe whose identifier takes the value given by the index will start. In GET operations, the va… |
| 1.3.6.1.4.1.2007.4.58.2.3 | TabletelProdWebProbeMonResetPPPTable | not-accessible | mandatory | This table allows to disconnect a PPP connection established through the interface whose number is given by the index. Each entry refers to one of the possible… |
| 1.3.6.1.4.1.2007.4.58.2.3.1 | RowtelProdWebProbeMonResetPPPEntry | not-accessible | mandatory | Each entry refers to one of the the possible PPP connections or one of the configured PPP interfaces, and consists of two variables: the number of the PPP inte… |
| 1.3.6.1.4.1.2007.4.58.2.3.1.1 | ColumntelProdWebProbeMonResetPPPIndex | read-only | mandatory | Index of the table: number of the PPP interface. |
| 1.3.6.1.4.1.2007.4.58.2.3.1.2 | ColumntelProdWebProbeMonResetPPPCommand | read-write | mandatory | If the value of this variable is set to 1, the PPP connection established through the interface given by the index will be disconnect. In GET operations, the v… |
| 1.3.6.1.4.1.2007.4.58.2.3.1.3 | ColumntelProdWebProbeMonResetPPPType | read-only | mandatory | The value of this variable indicates the type of the PPP interface correspondig to this entry: PPPoA (1) or PPPoE (2). |
| 1.3.6.1.4.1.2007.4.58.2.4 | TabletelProdWebProbeMonPPPErrStatsTable | not-accessible | mandatory | This table stores the conection errors statistics of every PPP connection configured. |
| 1.3.6.1.4.1.2007.4.58.2.4.1 | RowtelProdWebProbeMonPPPErrStatsEntry | not-accessible | mandatory | Each entry refers to one of the the possible PPP connections or one of the configured PPP interfaces, and consists of the following parameters: the number of t… |
| 1.3.6.1.4.1.2007.4.58.2.4.1.1 | ColumntelProdWebProbeMonPPPErrStatsIndex | read-only | mandatory | Index of the table: number of the PPP interface. |
| 1.3.6.1.4.1.2007.4.58.2.4.1.2 | ColumntelProdWebProbeMonPPPErrStatsLcpRemote | read-only | mandatory | Number of remote LCP errors that caused the failure to establish a PPP connection. The counter is reset when readed. |
| 1.3.6.1.4.1.2007.4.58.2.4.1.3 | ColumntelProdWebProbeMonPPPErrStatsLcpLocal | read-only | mandatory | Number of local LCP errors that caused the failure to establish a PPP connection. The counter is reset when readed. |
| 1.3.6.1.4.1.2007.4.58.2.4.1.4 | ColumntelProdWebProbeMonPPPErrStatsIpcpRemote | read-only | mandatory | Number of remote IPCP errors that caused the failure to establish a PPP connection. The counter is reset when readed. |
| 1.3.6.1.4.1.2007.4.58.2.4.1.5 | ColumntelProdWebProbeMonPPPErrStatsIpcpLocal | read-only | mandatory | Number of local IPCP errors that caused the failure to establish a PPP connection. The counter is reset when readed. |
| 1.3.6.1.4.1.2007.4.58.2.4.1.6 | ColumntelProdWebProbeMonPPPErrStatsAuthLocal | read-only | mandatory | Number of local authentication errors that caused the failure to establish a PPP connection. The counter is reset when readed. |
| 1.3.6.1.4.1.2007.4.58.2.4.1.7 | ColumntelProdWebProbeMonPPPErrStatsAuthRemote | read-only | mandatory | Number of remote authentication errors that caused the failure to establish a PPP connection. The counter is reset when readed. |
| 1.3.6.1.4.1.2007.4.58.2.4.1.8 | ColumntelProdWebProbeMonPPPErrStatsAuthNotSupp | read-only | mandatory | Number of authentication not supported errors that caused the failure to establish a PPP connection. The counter is reset when readed. |
| 1.3.6.1.4.1.2007.4.58.2.4.1.9 | ColumntelProdWebProbeMonPPPErrStatsCcpRemote | read-only | mandatory | Number of remote CCP errors that caused the failure to establish a PPP connection. The counter is reset when readed. |
| 1.3.6.1.4.1.2007.4.58.2.4.1.10 | ColumntelProdWebProbeMonPPPErrStatsCcpLocal | read-only | mandatory | Number of local CCP errors that caused the failure to establish a PPP connection. The counter is reset when readed. |
| 1.3.6.1.4.1.2007.4.58.2.4.1.11 | ColumntelProdWebProbeMonPPPErrStatsPPPoENoPados | read-only | mandatory | Number of PPPoE PADO timeout errors that caused the failure to establish a PPP connection. The counter is reset when readed. |
| 1.3.6.1.4.1.2007.4.58.2.4.1.12 | ColumntelProdWebProbeMonPPPErrStatsPPPoENoPadss | read-only | mandatory | Number of PPPoE PADO timeout errors that caused the failure to establish a PPP connection. The counter is reset when readed. |
| 1.3.6.1.4.1.2007.4.58.2.4.1.13 | ColumntelProdWebProbeMonPPPErrStatsBcpRemote | read-only | mandatory | Number of remote BCP errors that caused the failure to establish a PPP connection. The counter is reset when readed. |
| 1.3.6.1.4.1.2007.4.58.2.4.1.14 | ColumntelProdWebProbeMonPPPErrStatsBcpLocal | read-only | mandatory | Number of local BCP errors that caused the failure to establish a PPP connection. The counter is reset when readed. |