TELTONIKA-RUTX-MIB
89 objects
The MIB module for TELTONIKA rutx routers.
Imported Objects
| RFC1155-SMI | NetworkAddress |
| SNMPv2-SMI | Counter64 enterprises Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Opaque |
| SNMPv2-TC | DisplayString PhysAddress TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.48690 | Identityteltonika | The MIB module for TELTONIKA rutx routers. | ||
| 1.3.6.1.4.1.48690.1 | Nodedevice | |||
| 1.3.6.1.4.1.48690.1.1 | Scalarserial | read-only | current | Serial number |
| 1.3.6.1.4.1.48690.1.2 | ScalarrouterName | read-only | current | Router name |
| 1.3.6.1.4.1.48690.1.3 | ScalarproductCode | read-only | current | Router product code |
| 1.3.6.1.4.1.48690.1.4 | ScalarbatchNumber | read-only | current | Router batch number |
| 1.3.6.1.4.1.48690.1.5 | ScalarhardwareRevision | read-only | current | Router hardware revision |
| 1.3.6.1.4.1.48690.1.6 | ScalarfwVersion | read-only | current | Router firmware version |
| 1.3.6.1.4.1.48690.2 | Nodemobile | |||
| 1.3.6.1.4.1.48690.2.1 | ScalarmodemNum | read-only | current | The number of modems (regardless of their current state) present on this system. |
| 1.3.6.1.4.1.48690.2.2 | TablemodemTable | not-accessible | current | A list of modem entries. The number of entries is given by the value of modemNum. |
| 1.3.6.1.4.1.48690.2.2.1 | RowmodemEntry | not-accessible | current | An entry containing information of a particular interface. |
| 1.3.6.1.4.1.48690.2.2.1.1 | ColumnmIndex | read-only | current | A unique value, greater than zero, for each modem. |
| 1.3.6.1.4.1.48690.2.2.1.2 | ColumnmDescr | read-only | current | A textual string containing information about the modem. |
| 1.3.6.1.4.1.48690.2.2.1.3 | ColumnmImei | read-only | current | Modem IMEI |
| 1.3.6.1.4.1.48690.2.2.1.4 | ColumnmModel | read-only | current | Modem model |
| 1.3.6.1.4.1.48690.2.2.1.5 | ColumnmManufacturer | read-only | current | Modem manufacturer |
| 1.3.6.1.4.1.48690.2.2.1.6 | ColumnmRevision | read-only | current | Modem revision |
| 1.3.6.1.4.1.48690.2.2.1.7 | ColumnmSerial | read-only | current | Serial number |
| 1.3.6.1.4.1.48690.2.2.1.8 | ColumnmIMSI | read-only | current | IMSI |
| 1.3.6.1.4.1.48690.2.2.1.9 | ColumnmSimState | read-only | current | SIM status |
| 1.3.6.1.4.1.48690.2.2.1.10 | ColumnmPinState | read-only | current | PIN status |
| 1.3.6.1.4.1.48690.2.2.1.11 | ColumnmNetState | read-only | current | Mobile network registration status |
| 1.3.6.1.4.1.48690.2.2.1.12 | ColumnmSignal | read-only | current | Signal level |
| 1.3.6.1.4.1.48690.2.2.1.13 | ColumnmOperator | read-only | current | Operator currently in use |
| 1.3.6.1.4.1.48690.2.2.1.14 | ColumnmOperatorNumber | read-only | current | Operator number (MCC+MNC) |
| 1.3.6.1.4.1.48690.2.2.1.15 | ColumnmConnectionState | read-only | current | Sata session connection state |
| 1.3.6.1.4.1.48690.2.2.1.16 | ColumnmConnectionType | read-only | current | Data session connection type |
| 1.3.6.1.4.1.48690.2.2.1.17 | ColumnmTemperature | read-only | current | Modem temperature |
| 1.3.6.1.4.1.48690.2.2.1.18 | ColumnmCellID | read-only | current | CELL ID |
| 1.3.6.1.4.1.48690.2.2.1.19 | ColumnmSINR | read-only | current | LTE SINR level |
| 1.3.6.1.4.1.48690.2.2.1.20 | ColumnmRSRP | read-only | current | LTE RSRP level |
| 1.3.6.1.4.1.48690.2.2.1.21 | ColumnmRSRQ | read-only | current | LTE RSRQ level |
| 1.3.6.1.4.1.48690.2.2.1.22 | ColumnmSent | read-only | current | Total bytes sent. |
| 1.3.6.1.4.1.48690.2.2.1.23 | ColumnmReceived | read-only | current | Total bytes received. |
| 1.3.6.1.4.1.48690.2.2.1.24 | ColumnmIP | read-only | current | Modem IP address(es) |
| 1.3.6.1.4.1.48690.2.2.1.25 | ColumnmSentToday | read-only | current | Bytes sent today. |
| 1.3.6.1.4.1.48690.2.2.1.26 | ColumnmReceivedToday | read-only | current | Bytes received today. |
| 1.3.6.1.4.1.48690.3 | Nodegps | |||
| 1.3.6.1.4.1.48690.3.1 | Scalarlatitude | read-only | current | Latitutde coordinates |
| 1.3.6.1.4.1.48690.3.2 | Scalarlongtitude | read-only | current | Longtitude coordinates |
| 1.3.6.1.4.1.48690.3.3 | Scalaraccuracy | read-only | current | Accuracy |
| 1.3.6.1.4.1.48690.3.4 | Scalardatetime | read-only | current | GPS datetime |
| 1.3.6.1.4.1.48690.3.5 | ScalarnumSatellites | read-only | current | Number of satellites |
| 1.3.6.1.4.1.48690.4 | Nodenotifications | |||
| 1.3.6.1.4.1.48690.4.1 | NodemobileNotifications | |||
| 1.3.6.1.4.1.48690.4.1.1 | NotificationsignalChangeNotification | current | Signal strength trap | |
| 1.3.6.1.4.1.48690.4.1.2 | NotificationconnectionTypeNotification | current | Connection type trap | |
| 1.3.6.1.4.1.48690.4.2 | NodeioNotifications | |||
| 1.3.6.1.4.1.48690.4.2.0 | NodeioNotificationsObs | |||
| 1.3.6.1.4.1.48690.4.2.0.1 | ScalardinState | read-only | current | Digital input state |
| 1.3.6.1.4.1.48690.4.2.0.2 | ScalardoutState | read-only | current | Digital output state |
| 1.3.6.1.4.1.48690.4.2.1 | NotificationdigitalInputNotification | current | Digital input trap | |
| 1.3.6.1.4.1.48690.4.2.2 | NotificationdigitalOutputNotification | current | Digital output trap | |
| 1.3.6.1.4.1.48690.5 | Nodehotspot | |||
| 1.3.6.1.4.1.48690.5.1 | ScalarhsState | read-only | current | Hotspot state |
| 1.3.6.1.4.1.48690.5.2 | ScalarhsIP | read-only | current | The IPv4 address |
| 1.3.6.1.4.1.48690.5.3 | ScalarhsNet | read-only | current | Network interfaces |
| 1.3.6.1.4.1.48690.5.4 | ScalarhsAuth | read-only | current | Authentication mode |
| 1.3.6.1.4.1.48690.5.5 | ScalarhsSessionCount | read-only | current | Number of sessions |
| 1.3.6.1.4.1.48690.5.6 | TablehsSessionTable | not-accessible | current | A list of hotspot session entries. The number of entries is given by the value of hsSessionNum. |
| 1.3.6.1.4.1.48690.5.6.1 | RowhsSessionEntry | not-accessible | current | An entry containing information of a particular hotspot session. |
| 1.3.6.1.4.1.48690.5.6.1.1 | ColumnhssIndex | read-only | current | A unique value, greater than zero, for each session. |
| 1.3.6.1.4.1.48690.5.6.1.2 | ColumnhssMAC | read-only | current | Clients MAC address |
| 1.3.6.1.4.1.48690.5.6.1.3 | ColumnhssIP | read-only | current | Clients IP address |
| 1.3.6.1.4.1.48690.5.6.1.4 | ColumnhssID | read-only | current | Session ID |
| 1.3.6.1.4.1.48690.5.6.1.5 | ColumnhssUsername | read-only | current | Username |
| 1.3.6.1.4.1.48690.5.6.1.6 | ColumnhssState | read-only | current | Session state |
| 1.3.6.1.4.1.48690.5.6.1.7 | ColumnhssDwLimit | read-only | current | Download limit in bytes. Cannot be accessed using SNMPv1. |
| 1.3.6.1.4.1.48690.5.6.1.8 | ColumnhssUpLimit | read-only | current | Upload limit in bytes. Cannot be accessed using SNMPv1. |
| 1.3.6.1.4.1.48690.5.6.1.9 | ColumnhssTimeLimit | read-only | current | Time limit in sec. Cannot be accessed using SNMPv1. |
| 1.3.6.1.4.1.48690.5.6.1.10 | ColumnhssIdleTimeout | read-only | current | Idle timeout in sec. |
| 1.3.6.1.4.1.48690.5.6.1.11 | ColumnhssDwBandwidth | read-only | current | Max download bandwidth in b/s. Cannot be accessed using SNMPv1. |
| 1.3.6.1.4.1.48690.5.6.1.12 | ColumnhssUpBandwidth | read-only | current | Max upwnload bandwidth in b/s. Cannot be accessed using SNMPv1. |
| 1.3.6.1.4.1.48690.5.6.1.13 | ColumnhssURL | read-only | current | Original URL |
| 1.3.6.1.4.1.48690.6 | Nodeio | |||
| 1.3.6.1.4.1.48690.6.1 | ScalarioCount | read-only | current | Count of I/O |
| 1.3.6.1.4.1.48690.6.2 | TableioTable | not-accessible | current | A list of I/O. The number of entries is given by the value of ioCount. |
| 1.3.6.1.4.1.48690.6.2.1 | RowioEntry | not-accessible | current | An entry containing information of a particular I/O. |
| 1.3.6.1.4.1.48690.6.2.1.1 | ColumnioIndex | read-only | current | A unique value, greater than zero, for each session. |
| 1.3.6.1.4.1.48690.6.2.1.2 | ColumnioSystemName | read-only | current | The name of the I/O. |
| 1.3.6.1.4.1.48690.6.2.1.3 | ColumnioName | read-only | current | The name of the I/O, as displayed in WebUI. |
| 1.3.6.1.4.1.48690.6.2.1.4 | ColumnioType | read-only | current | A description of I/O type. |
| 1.3.6.1.4.1.48690.6.2.1.5 | ColumnioBidirectional | read-only | current | Is I/O bidirectional? |
| 1.3.6.1.4.1.48690.6.2.1.6 | ColumnioState | read-only | current | State of I/O. |
| 1.3.6.1.4.1.48690.6.2.1.7 | ColumnioInput | read-only | current | Is I/O an input? |
| 1.3.6.1.4.1.48690.6.2.1.8 | ColumnioInverted | read-only | current | Is value of I/O inverted? |
| 1.3.6.1.4.1.48690.6.2.1.9 | ColumnioCurrent | read-only | current | Current amount flowing though ACL. |
| 1.3.6.1.4.1.48690.6.2.1.10 | ColumnioPercentage | read-only | current | Percentage of ACL. |