TERRA-DEFINITIONS-MIB
14 objects
No module-level DESCRIPTION found.
Imported Objects
| SNMPv2-SMI | Gauge32 Integer32 MODULE-IDENTITY Unsigned32 |
| SNMPv2-TC | TEXTUAL-CONVENTION |
| TERRA-SMI | terraRoot |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.30631.3 | IdentityterraDefIdentMib |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DefFaultStatus | INTEGER { normal( 1 ), fault( 2 ) } | current | An enumerated value that provides a fault status of a particular hardware or software parameter that usually represent some sort of condition. A value normal(1) indicates the normal condition. A value fault(2) indicates… |
| DefHundredthNanoMeter | Unsigned32 | current | This data type represents wavelength values that are normally expressed in nano meters. Units are in hundredths of a NanoMeter; for example, 1550.56 nm will be represented as 155056. |
| DefMilliAmp | Gauge32 | current | This data type represents current levels that are normally expressed in amperes. Units are in milliamperes; for example, 2.1 Amperes would be expressed as 2100. |
| DefOnOffControl | INTEGER { off( 1 ), on( 2 ), meaningless( 3 ) } | current | An enumerated value that provides a control of a particular hardware or software parameter that usually represent some sort of switch. A SET request with a value off(1) will cause the switch to be shut off. A SET reques… |
| DefOnOffStatus | INTEGER { off( 1 ), on( 2 ) } | current | An enumerated value that provides a status of a particular hardware or software parameter that usually represent some sort of switch. A value off(1) indicates the switch is off. A value on(2) indicates the switch is on. |
| DefRelayState | INTEGER (0..1) | current | Represents relay contact state. A value closed (0) defines closed contact state, value opened (1) - opened state. |
| DefStatus | INTEGER (0..1) | current | This data type represents base device status (error) bits ( 0 represents normal condition, 1 - represents fault condition). |
| DefTenthAmp | Gauge32 | current | This data type represents current levels that are normally expressed in Amperes. Units are in tenths of a Ampere; for example, 1.1 Amperes will be represented as 11. |
| DefTenthCentigrade | Gauge32 | current | This data type represents temperature values that are normally expressed in Centigrade. Units are in tenths of a Centigrade; for example, -5.1 Centigrade will be represented as -51. |
| DefTenthdB | Integer32 (-100..200) | current | This data type represents power levels that are normally expressed in dB. Units are in tenths of a dB; for example, -5.1 dB will be represented as -51. |
| DefTenthdBm | Integer32 (-100..200) | current | This data type represents power levels that are normally expressed in dBm. Units are in tenths of a dBm; for example, -5.1 dBm will be represented as -51. |
| DefTenthdBuV | Integer32 (-100..200) | current | This data type represents power levels that are normally expressed in dBmV. Units are in tenths of a dBmV; for example, -5.1 dBmV will be represented as -51. |
| DefTenthVolt | Gauge32 | current | This data type represents voltage levels that are normally expressed in volts. Units are in tenths of a volt; for example, -48.1 volts will be represented as -481. |