TIARA-BUNDLE-MIB
34 objects
Bundle MIB for defining bundle parameters
Imported Objects
| RFC1213-MIB | DisplayString |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | RowStatus TruthValue |
| TIARA-NETWORKS-SMI | tiaraMgmt |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3174.2.13 | IdentitytiaraBundleMib | Bundle MIB for defining bundle parameters | ||
| 1.3.6.1.4.1.3174.2.13.1 | TablebundleTable | not-accessible | current | Bundle management related parameters are defined in this table. |
| 1.3.6.1.4.1.3174.2.13.1.1 | RowbundleTableEntry | not-accessible | current | Bundle parameter entries are listed in this table. |
| 1.3.6.1.4.1.3174.2.13.1.1.1 | ColumnbundleId | not-accessible | current | bundleId is the identifier of a bundle. To configure a bundle, this parameter must be used as the index. This is assigned internally by the Tiara system. Whene… |
| 1.3.6.1.4.1.3174.2.13.1.1.2 | ColumnbundleName | read-create | current | Name of the bundle. To configure a bundle, this parameter must be set. That is, a descriptive name should be given to a bundle. The maximum length of a bundle … |
| 1.3.6.1.4.1.3174.2.13.1.1.3 | ColumnbundleContact | read-create | current | Name of the person who can be contacted for information about the bundle. The maximum length for this parameter is 15 characters. This parameter can be set aft… |
| 1.3.6.1.4.1.3174.2.13.1.1.4 | ColumnbundleDescr | read-create | current | Brief description of the bundle. The maximum length of this parameter is 25 characters. This parameter can be set after the bundle is named and before the link… |
| 1.3.6.1.4.1.3174.2.13.1.1.5 | ColumnbundleEncapsulation | read-create | current | Specifies the type of protocol encapsulation for the bundle. To configure protocol-specific parameters for a bundle, the bundle must first be encapsulated with… |
| 1.3.6.1.4.1.3174.2.13.1.1.6 | ColumnbundleDropEs | read-create | current | The length of time in seconds that the error condition Errored Seconds exists before a link is dropped. This parameter can be configured only for multilink bun… |
| 1.3.6.1.4.1.3174.2.13.1.1.7 | ColumnbundleDropSes | read-create | current | The length of time in seconds that the error condition Severely Errored Seconds exists before a link is dropped. This parameter can be configured only for mult… |
| 1.3.6.1.4.1.3174.2.13.1.1.8 | ColumnbundleDropUas | read-create | current | The length of time in seconds that the error condition Unavailable Seconds exists before a link is dropped. This parameter can be configured only for multilink… |
| 1.3.6.1.4.1.3174.2.13.1.1.9 | ColumnbundleIpAddr | read-create | current | The bundle's source IP address. This is one of the parameters required to set up IP multiplexing for a bundle. This parameter can be configured only when the b… |
| 1.3.6.1.4.1.3174.2.13.1.1.10 | ColumnbundleSubnetMask | read-create | current | This parameter represents the source subnet mask address. This is one of the parameters required to set up IP multiplexing for a bundle. This parameter is set … |
| 1.3.6.1.4.1.3174.2.13.1.1.11 | ColumnbundleSrcForwardingAddrPrimary | read-create | current | The bundle's destination IP address. This is one of the parameters required to set up IP multiplexing for a bundle. This parameter can be configured when the b… |
| 1.3.6.1.4.1.3174.2.13.1.1.12 | ColumnbundleSrcForwardingAddrSecondary | read-create | current | The bundle's secondary or backup destination address. This address will be used only if the primary address uses an ethernet interface and failover is enabled … |
| 1.3.6.1.4.1.3174.2.13.1.1.13 | ColumnbundleRestoreMethod | read-write | current | bundleRestoreMethod defines how a dropped link of a multilink bundle will be restored. It can be done either manually or automatically. If the restore mode is … |
| 1.3.6.1.4.1.3174.2.13.1.1.14 | ColumnbundleLinkRestoralTime | read-create | current | Error-free time interval (in seconds) that must pass before a link is automatically restored. This parameter can be set when the bundleRestoreMethod is automat… |
| 1.3.6.1.4.1.3174.2.13.1.1.15 | ColumnbundleStatus | read-write | current | bundleStatus shutdowns the bundle. Although the default is 'enable,' the bundle remains disabled until all necessary parameters are present |
| 1.3.6.1.4.1.3174.2.13.1.1.16 | ColumnbundleLinkRestore | read-write | current | bundleLinkRestore specifies the links to be restored manually. This parameter is configured when the value of bundleRestoreMethod is manual. The user needs to … |
| 1.3.6.1.4.1.3174.2.13.1.1.17 | ColumnbundleNoOfLinks | read-only | current | Indicates the number of links configured in the bundle. |
| 1.3.6.1.4.1.3174.2.13.1.1.18 | ColumnbundleTotalBw | read-only | current | Indicates the total bandwidth for this bundle. The bundle bandwidth is the aggregated band- widths of all the links assigned to a particular bundle. |
| 1.3.6.1.4.1.3174.2.13.1.1.19 | ColumnbundleRowStatus | read-create | current | bundleRowStatus is used to add/delete a row in the table. Adding or deleting a row corresponds to creating a bundle or deleting a bundle. In order to add a row… |
| 1.3.6.1.4.1.3174.2.13.2 | TablebundleLinkTable | not-accessible | current | All the parameters related to the assigned links of a bundle are defined in bundleLinkTable. A row in this table can be created when a bundle with the correspo… |
| 1.3.6.1.4.1.3174.2.13.2.1 | RowbundleLinkEntry | not-accessible | current | Link parameters that relate to a given bundle are specified in this table. |
| 1.3.6.1.4.1.3174.2.13.2.1.1 | ColumnbundleLinkT1Num | not-accessible | current | bundleLinkT1Num is the number of the T1 link being added to a specific bundle. For example, to assign link number 4, the value of this parameter should be set … |
| 1.3.6.1.4.1.3174.2.13.2.1.2 | ColumnbundleLinkTimeSlots | read-create | current | bundleLinkTimeSlots indicates the DS0 channels in a fractional T1 link. The LSB in the OCTET STRING represents DS0 channel number 1. For example, to assign DS0… |
| 1.3.6.1.4.1.3174.2.13.2.1.3 | ColumnbundleLinkType | read-create | current | bundleLinkType specifies the interface type (i.e., CT3, T1, T3, and HSSI) of the link being assigned to the bundle. This is a mandatory parameter for Row creat… |
| 1.3.6.1.4.1.3174.2.13.2.1.4 | ColumnbundleLinkSpeed | read-create | current | The bundleLinkSpeed specifies the transmission speed of all DS0 channels in a bundle. |
| 1.3.6.1.4.1.3174.2.13.2.1.5 | ColumnbundleLinkInvertedData | read-create | current | Setting bundleLinkInvertedData parameter to true will have the system invert data on all DS0 channels before transmission. Data inversion is used only for HDLC… |
| 1.3.6.1.4.1.3174.2.13.2.1.6 | ColumnbundleLinkPhysIfNum | read-create | current | bundleLinkPhysIfNum specifies the interface number of the interface type such as CT3, HSSI, T3 on which this link is being created. This variable holds signifi… |
| 1.3.6.1.4.1.3174.2.13.2.1.7 | ColumnbundleLinkDiffDelay | read-only | current | bundleLinkDiffDelay specifies the maximum differential delay allowed on the links in a multilink bundle. If the packet delay on any link exceeds the differenti… |
| 1.3.6.1.4.1.3174.2.13.2.1.8 | ColumnbundleLinkBw | read-only | current | bundleLinkBw indicates the bandwidth of the link. The bandwidth of an individual link depends upon its configuration. For example, in a link of type T1, its ba… |
| 1.3.6.1.4.1.3174.2.13.2.1.9 | ColumnbundleLinkStatus | read-only | current | bundleLinkStatus indicates whether a particular link in a bundle is up or down. The link can go down due to various reasons such as differential delay, a broke… |
| 1.3.6.1.4.1.3174.2.13.2.1.10 | ColumnbundleLinkRowStatus | read-create | current | bundleLinkRowStatus is used to add or delete a row in the table. To create a row, this parameter is set to value 4(createAndGo). To delete a row, this paramete… |