TIARA-NETWORKS-DSX-TE1-MIB
243 objects
Interface MIB definitions for Tiara T1/E1 interface modules.
Imported Objects
| RFC-1215 | TRAP-TYPE |
| RFC1213-MIB | DisplayString |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | TruthValue |
| TIARA-NETWORKS-DSX-TC-MIB | dsxT1E1IfGroup |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3174.2.7.1.2.1 | IdentitydsxT1E1MIB | Interface MIB definitions for Tiara T1/E1 interface modules. | ||
| 1.3.6.1.4.1.3174.2.7.1.2.1.1 | NodedsxT1E1IfConfigGroup | |||
| 1.3.6.1.4.1.3174.2.7.1.2.1.1.1 | TabledsxT1E1IfConfigLineTable | not-accessible | current | A list of T1/E1 interfaces currently configured. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.1.1.1 | RowdsxT1E1IfConfigLineEntry | not-accessible | current | An entry containing configuration for each T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.1.1.1.1 | ColumndsxT1E1IfIndex | not-accessible | current | An integer value which is an index in to the entries of ifTable (MIB-II) whose interface type is ds1 |
| 1.3.6.1.4.1.3174.2.7.1.2.1.1.1.1.2 | ColumndsxT1E1IfConfigServiceMode | read-write | current | Indicates the T1/E1 interface is in service if it is TRUE. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.1.1.1.3 | ColumndsxT1E1IfConfigLineMode | read-write | current | Line Mode for this T1/E1 interface |
| 1.3.6.1.4.1.3174.2.7.1.2.1.1.1.1.4 | ColumndsxT1E1IfConfigLineType | read-write | current | This variable indicates the variety of T1/E1 interpretation of the usage and error statistics. The values, in sequence, describe: TITLE: SPECIFICATION: esf Ext… |
| 1.3.6.1.4.1.3174.2.7.1.2.1.1.1.1.5 | ColumndsxT1E1IfConfigLineCode | read-write | current | This variable describes the variety of Zero Code Suppression used on the link, which in turn affects a number of its characteristics. b8zs refers to the use of… |
| 1.3.6.1.4.1.3174.2.7.1.2.1.1.1.1.6 | ColumndsxT1E1IfConfigLBO | read-write | current | Signal attenuation at 772 kHz lbo-zero-db carrier advised LBO code A 0.0 - 5.5 db lbo-75-db carrier advised LBO code B 7.5 - 13.0 db lbo-15-db carrier advised … |
| 1.3.6.1.4.1.3174.2.7.1.2.1.1.1.1.7 | ColumndsxT1E1IfConfigCableLength | read-write | current | This variable specifies the length of the cable in feet. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.1.1.1.8 | ColumndsxT1E1IfConfigRaiAlarm | read-write | current | Configurition of Remote Alarm Indication Alarm generation and detection. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.1.1.1.9 | ColumndsxT1E1IfConfigTransmitClock | read-write | current | The source of Transmit Clock. 'timing-line' indicates that the recovered re- ceive clock is used as the transmit clock. 'timing-internal' indicates that a loca… |
| 1.3.6.1.4.1.3174.2.7.1.2.1.1.1.1.10 | ColumndsxT1E1IfConfigTimeSlotMap | read-only | current | Time slot map of the T1/E1 line that are being used if it is used corresponding bit position is set. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.1.1.1.11 | ColumndsxT1E1IfCircuitId | read-write | current | |
| 1.3.6.1.4.1.3174.2.7.1.2.1.1.1.1.12 | ColumndsxT1E1IfContactInfo | read-write | current | |
| 1.3.6.1.4.1.3174.2.7.1.2.1.1.1.1.13 | ColumndsxT1E1IfDescription | read-write | current | |
| 1.3.6.1.4.1.3174.2.7.1.2.1.1.2 | TabledsxT1E1IfConfigFdlTable | not-accessible | current | A list of T1/E1 interface currently configured. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.1.2.1 | RowdsxT1E1IfConfigFdlEntry | not-accessible | current | Configurable Facility Data Link (FDL) field for enable/disable the FDL utility on T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.1.2.1.1 | ColumndsxT1E1IfConfigFdl | read-write | current | The configuration FDL type fdl-ansi-only - only supports ANSI FDL , fdl-att-only only supports ATT FDL, fdl-ansi-att supports both ANSI and ATT FDL. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.1.2.1.2 | ColumndsxT1E1IfConfigFdlCsuDsuType | read-write | current | The configuration of the type of equipment fdl-csu - responds to only CSU FDL requests fdl-dsu - responds to only DSU FDL requests fdl-csudsu - responds to bot… |
| 1.3.6.1.4.1.3174.2.7.1.2.1.1.3 | NodedsxT1E1IfAlarmConfigGroup | |||
| 1.3.6.1.4.1.3174.2.7.1.2.1.1.3.1 | TabledsxT1E1IfAlarmThresholdConfigTable | not-accessible | current | A list of T1/E1 interface alarm threshold configuration parameters. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.1.3.1.1 | RowdsxT1E1IfAlarmThresholdConfigEntry | not-accessible | current | An entry containing alarm configuration parameters for each T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.1.3.1.1.1 | ColumndsxT1E1IfAlarmThresholdConfigIndex | not-accessible | current | Index of the Threshold Alarms 1 - 10. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.1.3.1.1.2 | ColumndsxT1E1IfAlarmThresholdConfigObject | read-write | current | Threshold alarm - variables being monitored. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.1.3.1.1.3 | ColumndsxT1E1IfAlarmThresholdConfigSamplingInterval | read-write | current | Sampling Interval is the time between each sampling period. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.1.3.1.1.4 | ColumndsxT1E1IfAlarmThresholdConfigSampleType | read-write | current | Threshold Alarm: Sampling type sample-absolute - compares the monitored variable value againist the thresholds, sample-delta - compares the monitored variable … |
| 1.3.6.1.4.1.3174.2.7.1.2.1.1.3.1.1.5 | ColumndsxT1E1IfAlarmThresholdConfigStartupType | read-write | current | Threshold Alarm :if TRUE the first sample will be ignored if thresholds are crossed. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.1.3.1.1.6 | ColumndsxT1E1IfAlarmThresholdConfigRisingThreshold | read-write | current | Threshold Alarm: Rising threshold limit |
| 1.3.6.1.4.1.3174.2.7.1.2.1.1.3.1.1.7 | ColumndsxT1E1IfAlarmThresholdConfigFallingThreshold | read-write | current | Threshold Alarm: Falling threshold limit |
| 1.3.6.1.4.1.3174.2.7.1.2.1.1.4 | TabledsxT1E1IfTestConfigTable | not-accessible | current | A list of T1/E1 interface test configuration parameters. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.1.4.1 | RowdsxT1E1IfTestConfigEntry | not-accessible | current | An entry containing test configuration parameters for each currently T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.1.4.1.1 | ColumndsxT1E1IfTestConfigType | read-write | current | Test type. Specifies the type of test to execute on this T1/E1 interface. To perform no-test, payload-loopback-test, line-loopback-test only TestType is mandat… |
| 1.3.6.1.4.1.3174.2.7.1.2.1.1.4.1.2 | ColumndsxT1E1IfTestConfigTime | read-write | current | Test time. when set to 0, test time is unlimited. Otherwise duration of test, specified in seconds. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.1.4.1.3 | ColumndsxT1E1IfTestConfigPattern | read-write | current | Bit Pattern type used in testing T1/E1 for Pattern Test. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.1.4.1.4 | ColumndsxT1E1IfTestConfigLoopCode | read-write | current | Type of loopcode is used for loopback test. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.2 | NodedsxT1E1IfStatusGroup | |||
| 1.3.6.1.4.1.3174.2.7.1.2.1.2.1 | TabledsxT1E1IfStatusTable | not-accessible | current | A list of T1/E1 interface status entries |
| 1.3.6.1.4.1.3174.2.7.1.2.1.2.1.1 | RowdsxT1E1IfStatusEntry | not-accessible | current | An entry containing status entry for each currently active T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.2.1.1.1 | ColumndsxT1E1IfStatusLineStatus | read-only | current | The summary of the status RRAIStatus - Recieve RAI (Recieve Alarm Indication), TRAIStatus - Transmit RAI , RLOSStatus - Recieve Loss Of Sync, RISStatus - Recie… |
| 1.3.6.1.4.1.3174.2.7.1.2.1.2.1.1.2 | ColumndsxT1E1IfStatusTransmitClock | read-only | current | The source of Tranmit Clock. 'timing-line' indicates that the recovered re- ceive clock is used as the transmit clock. 'timing-internal' indicates that a local… |
| 1.3.6.1.4.1.3174.2.7.1.2.1.2.2 | TabledsxT1E1IfAlarmStatusTable | not-accessible | current | A list of T1/E1 interface alarm status entries |
| 1.3.6.1.4.1.3174.2.7.1.2.1.2.2.1 | RowdsxT1E1IfAlarmStatusEntry | not-accessible | current | An entry containing alarm status for each T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.2.2.1.1 | ColumndsxT1E1IfAlarmStatusAlarmStatus | read-only | current | Alarm Status of T1/E1 interface. RRAI - Recieve Rx Alarm Indication, TRAI - Transmit Rx Alarm Indication, RAIS - Recieve Alarm Indication Signal, TAIS - Transm… |
| 1.3.6.1.4.1.3174.2.7.1.2.1.2.2.1.2 | ColumndsxT1E1IfAlarmStatusThresholdStatus | read-only | current | Status of the user configurable threshold Alarms 1 means present. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.2.3 | TabledsxT1E1IfTestStatusTable | not-accessible | current | A list of T1/E1 interface test status entries |
| 1.3.6.1.4.1.3174.2.7.1.2.1.2.3.1 | RowdsxT1E1IfTestStatusEntry | not-accessible | current | An entry containing test status entry for each T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.2.3.1.1 | ColumndsxT1E1IfTestStatusTestType | read-only | current | Test type initiated on T1/E1 line. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.2.3.1.2 | ColumndsxT1E1IfTestStatusTestTime | read-only | current | Time elapsed since the test started on T1/E1 line |
| 1.3.6.1.4.1.3174.2.7.1.2.1.2.3.1.3 | ColumndsxT1E1IfTestStatusTestState | read-only | current | Current state of the running test on T1/E1 line |
| 1.3.6.1.4.1.3174.2.7.1.2.1.2.3.1.4 | ColumndsxT1E1IfTestStatusTestPattern | read-only | current | Bit Pattern generated to test the T1/E1, only relevent to Pattern Test. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.2.3.1.5 | ColumndsxT1E1IfTestStatusLockedSeconds | read-only | current | Count of seconds, during which the pattern is synchronized |
| 1.3.6.1.4.1.3174.2.7.1.2.1.2.3.1.6 | ColumndsxT1E1IfTestStatusSyncLossCount | read-only | current | Counter for the pattern synchronization losses |
| 1.3.6.1.4.1.3174.2.7.1.2.1.2.3.1.7 | ColumndsxT1E1IfTestStatusErrorCount | read-only | current | Counter for the Bit error during the test |
| 1.3.6.1.4.1.3174.2.7.1.2.1.2.3.1.8 | ColumndsxT1E1IfTestStatusLoopCode | read-only | current | The loop codes transmitted on the T1/E1 interface Only relevent to the Remote LoopUp and Remote LoopDown tests. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.2.4 | TabledsxT1E1IfLastTestResultTable | not-accessible | current | A list of T1/E1 interface previous test status entries |
| 1.3.6.1.4.1.3174.2.7.1.2.1.2.4.1 | RowdsxT1E1IfLastTestResultEntry | not-accessible | current | An entry containing previous test status entry for each T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.2.4.1.1 | ColumndsxT1E1IfLastTestResultTestType | read-only | current | Status of the previous test conducted on this T1/E1 interface, this field corresponds to Type of Test conducted |
| 1.3.6.1.4.1.3174.2.7.1.2.1.2.4.1.2 | ColumndsxT1E1IfLastTestResultTestTime | read-only | current | Duration of the test conducted in previous test |
| 1.3.6.1.4.1.3174.2.7.1.2.1.2.4.1.3 | ColumndsxT1E1IfLastTestResultTestState | read-only | current | This field shows in which state previous test was ended |
| 1.3.6.1.4.1.3174.2.7.1.2.1.2.4.1.4 | ColumndsxT1E1IfLastTestResultTestPattern | read-only | current | If the previous test conducted was pattern test, This field will have type of pattern used to test. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.2.4.1.5 | ColumndsxT1E1IfLastTestResultLockedSeconds | read-only | current | Duration in which signal was synchronized while under test. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.2.4.1.6 | ColumndsxT1E1IfLastTestResultSyncLossCount | read-only | current | Counter for the pattern synchronization losses in previous test results. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.2.4.1.7 | ColumndsxT1E1IfLastTestResultErrorCount | read-only | current | Counter for the Bit error during the test in previous test |
| 1.3.6.1.4.1.3174.2.7.1.2.1.2.4.1.8 | ColumndsxT1E1IfLastTestResultLoopCode | read-only | current | Type loopcode used to put interface under remote loop back |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3 | NodedsxT1E1IfStatsGroup | |||
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.1 | TabledsxT1E1IfArchiveStatsValidIntervalsTable | not-accessible | current | Number of intervals available in archive statistics table for this T1/E1 interface |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.1.1 | RowdsxT1E1IfArchiveStatsValidIntervalsEntry | not-accessible | current | An entry containing statistics entry for each T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.1.1.1 | ColumndsxT1E1IfAnsiArchiveStatsValidIntervals | read-only | current | Total number of archived statistics collected according to ANSI standards. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.1.1.2 | ColumndsxT1E1IfAttArchiveStatsValidIntervals | read-only | current | Total number of archived statistics collected according to ATT standards. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.1.1.3 | ColumndsxT1E1IfIetfArchiveStatsValidIntervals | read-only | current | Total number of archived statistics collected according to IETF standards. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.1.1.4 | ColumndsxT1E1IfUserTotalStatsValidDays | read-only | current | Total number of days archived statistics collected according to User definations. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.1.1.5 | ColumndsxT1E1IfUserArchiveStatsValidIntervals | read-write | current | User Archive Stats Valid Interval. Setting this variable to 0 will clear all the User Statistics Tables |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.2 | NodedsxT1E1IfAnsiStatsGroup | |||
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.2.1 | TabledsxT1E1IfAnsiCurrentStatsTable | not-accessible | current | Statistics collected according ANSI standards and collected in current 900 secondss period. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.2.1.1 | RowdsxT1E1IfAnsiCurrentStatsEntry | not-accessible | current | Statistics collected in current 900 secs ( i.e. 15 mins) kept in this table |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.2.1.1.1 | ColumndsxT1E1IfAnsiCurrentStatsUASState | read-only | current | The State of T1/E1 line according to ANSI standards |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.2.1.1.2 | ColumndsxT1E1IfAnsiCurrentStatsTimeInCurrent | read-only | current | The number of seconds that have elapsed since the beginning of the current error measurement period |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.2.1.1.3 | ColumndsxT1E1IfAnsiCurrentPathStatsCV | read-only | current | The number of Path Coding Violations encoun- tered by a T1/E1 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.2.1.1.4 | ColumndsxT1E1IfAnsiCurrentPathStatsES | read-only | current | The number of Errored Seconds, encountered by a T1/E1 interface in the current 15 minute inter- val. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.2.1.1.5 | ColumndsxT1E1IfAnsiCurrentPathStatsSES | read-only | current | The number of Severely Errored Seconds encoun- tered by a T1/E1 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.2.1.1.6 | ColumndsxT1E1IfAnsiCurrentPathStatsSAS | read-only | current | Seconds with Severe Alarms |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.2.1.1.7 | ColumndsxT1E1IfAnsiCurrentPathStatsCSS | read-only | current | The number of Controlled Slip Seconds encoun- tered by a T1/E1 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.2.1.1.8 | ColumndsxT1E1IfAnsiCurrentPathStatsUAS | read-only | current | The number of Unavailable Seconds encountered by a T1/E1 interface in the current 15 minute in- terval. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.2.1.1.9 | ColumndsxT1E1IfAnsiCurrentLineStatsCV | read-only | current | The number of Line Coding Violations encoun- tered by a T1/E1 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.2.1.1.10 | ColumndsxT1E1IfAnsiCurrentLineStatsES | read-only | current | The number of Errored Seconds, encountered by a T1/E1 interface in the current 15 minute inter- val. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.2.1.1.11 | ColumndsxT1E1IfAnsiCurrentLineStatsSES | read-only | current | The number of Severely Errored Seconds encoun- tered by a T1/E1 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.2.2 | TabledsxT1E1IfAnsiTotalStatsTable | not-accessible | current | Table for the Total Statistics over past 24 hrs |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.2.2.1 | RowdsxT1E1IfAnsiTotalStatsEntry | not-accessible | current | Table for the Total Statistics over past 24 hrs |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.2.2.1.1 | ColumndsxT1E1IfAnsiTotalPathStatsCV | read-only | current | The number of Path Coding Violations encoun- tered by a T1/E1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.2.2.1.2 | ColumndsxT1E1IfAnsiTotalPathStatsES | read-only | current | The number of Errored Seconds encountered by a T1/E1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.2.2.1.3 | ColumndsxT1E1IfAnsiTotalPathStatsSES | read-only | current | The number of Severely Errored Seconds encoun- tered by a T1/E1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.2.2.1.4 | ColumndsxT1E1IfAnsiTotalPathStatsSAS | read-only | current | Total No seconds with Severe Alarms in past 24 hrs |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.2.2.1.5 | ColumndsxT1E1IfAnsiTotalPathStatsCSS | read-only | current | The number of Controlled Slip Seconds encoun- tered by a T1/E1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.2.2.1.6 | ColumndsxT1E1IfAnsiTotalPathStatsUAS | read-only | current | The number of Unavailable Seconds encountered by a T1/E1 interface in the previous 24 hour in- terval. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.2.2.1.7 | ColumndsxT1E1IfAnsiTotalLineStatsCV | read-only | current | The number of Line Coding Violations encoun- tered by a T1/E1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.2.2.1.8 | ColumndsxT1E1IfAnsiTotalLineStatsES | read-only | current | The number of Errored Seconds encountered by a T1/E1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.2.2.1.9 | ColumndsxT1E1IfAnsiTotalLineStatsSES | read-only | current | The number of Severely Errored Seconds encoun- tered by a T1/E1 interface in the previous 24 hour interval. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.2.3 | TabledsxT1E1IfAnsiArchiveIntervalStatsTable | not-accessible | current | A list of T1/E1 interface test status entries |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.2.3.1 | RowdsxT1E1IfAnsiArchiveIntervalStatsEntry | not-accessible | current | An entry containing status entry for each currently active T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.2.3.1.1 | ColumndsxT1E1IfAnsiArchiveStatsInterval | not-accessible | current | Number of Intervals available in archive table |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.2.3.1.2 | ColumndsxT1E1IfAnsiArchiveIntervalPathStatsCV | read-only | current | The number of Path Coding Violations encoun- tered by a T1 interface in the archive intervals. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.2.3.1.3 | ColumndsxT1E1IfAnsiArchiveIntervalPathStatsES | read-only | current | The number of Errored Seconds, encountered by a DS3 interface in the archive intervals. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.2.3.1.4 | ColumndsxT1E1IfAnsiArchiveIntervalPathStatsSES | read-only | current | The number of Severely Errored Seconds encoun- tered by a T1/E1 interface in the archive intervals . |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.2.3.1.5 | ColumndsxT1E1IfAnsiArchiveIntervalPathStatsSAS | read-only | current | The number of Severely Errored Framing Seconds encountered by a T1/E1 interface in the archive intervals. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.2.3.1.6 | ColumndsxT1E1IfAnsiArchiveIntervalPathStatsCSS | read-only | current | The number of Controlled Slip Seconds encountered by a T1/E1 interface in the archive intervals. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.2.3.1.7 | ColumndsxT1E1IfAnsiArchiveIntervalPathStatsUAS | read-only | current | The number of Unavailable Seconds encountered by a T1/E1 interface in the archive intervals. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.2.3.1.8 | ColumndsxT1E1IfAnsiArchiveIntervalLineStatsCV | read-only | current | The number of Line Coding Violations encoun- tered by a T1/E1 interface in the archive intervals. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.2.3.1.9 | ColumndsxT1E1IfAnsiArchiveIntervalLineStatsES | read-only | current | The number of Errored Seconds, encountered by a T1/E1 interface in the archive intervals. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.2.3.1.10 | ColumndsxT1E1IfAnsiArchiveIntervalLineStatsSES | read-only | current | The number of Severely Errored Seconds encoun- tered by a T1/E1 interface in the archive intervals . |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.3 | NodedsxT1E1IfAttStatsGroup | |||
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.3.1 | TabledsxT1E1IfAttCurrentStatsTable | not-accessible | current | A list of T1/E1 interface statistics for current interval |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.3.1.1 | RowdsxT1E1IfAttCurrentStatsEntry | not-accessible | current | An entry containing statistics for each currently active T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.3.1.1.1 | ColumndsxT1E1IfAttCurrentStatsUASState | read-only | current | The Current state of availablity of T1/E1 interface |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.3.1.1.2 | ColumndsxT1E1IfAttCurrentStatsTimeInCurrent | read-only | current | The number of seconds that have elapsed since the beginning of the far end current error-measurement period. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.3.1.1.3 | ColumndsxT1E1IfAttCurrentStatsEEV | read-only | current | The number of Far Far End Errored EVents en- countered by a T1/E1 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.3.1.1.4 | ColumndsxT1E1IfAttCurrentStatsES | read-only | current | The number of Far Far End Errored Seconds en- countered by a T1/E1 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.3.1.1.5 | ColumndsxT1E1IfAttCurrentStatsUAS | read-only | current | The number of Unavailable Seconds encountered by a T1/E1 interface in the current 15 minute in- terval. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.3.1.1.6 | ColumndsxT1E1IfAttCurrentStatsBES | read-only | current | The number of Bursty Errored Seconds (BESs) encountered by a T1/E1 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.3.1.1.7 | ColumndsxT1E1IfAttCurrentStatsSES | read-only | current | The number of Far End Severely Errored Seconds encountered by a T1/E1 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.3.1.1.8 | ColumndsxT1E1IfAttCurrentStatsLOFC | read-only | current | The number of loss of frames occurred in the current 15 minute interval. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.3.1.1.9 | ColumndsxT1E1IfAttCurrentStatsCSS | read-only | current | The number of Far End Controlled Slip Seconds encountered by a T1/E1 interface in the current interval. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.3.2 | TabledsxT1E1IfAttTotalStatsTable | not-accessible | current | A list of T1/E1 interface test status entries |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.3.2.1 | RowdsxT1E1IfAttTotalStatsEntry | not-accessible | current | An entry containing status entry for each currently active T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.3.2.1.1 | ColumndsxT1E1IfAttTotalStatsEEV | read-only | current | Invoke the configured test. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.3.2.1.2 | ColumndsxT1E1IfAttTotalStatsES | read-only | current | The number of Near End Errored Seconds encoun- tered by a T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.3.2.1.3 | ColumndsxT1E1IfAttTotalStatsUAS | read-only | current | The number of Unavailable Seconds encountered by a T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.3.2.1.4 | ColumndsxT1E1IfAttTotalStatsBES | read-only | current | The number of Bursty Errored Seconds (BESs) encountered by a T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.3.2.1.5 | ColumndsxT1E1IfAttTotalStatsSES | read-only | current | The number of Near End Severely Errored Seconds encountered by a T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.3.2.1.6 | ColumndsxT1E1IfAttTotalStatsLOFC | read-only | current | Count of loss of frames. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.3.2.1.7 | ColumndsxT1E1IfAttTotalStatsCSS | read-only | current | The number of Near End Controlled Slip Seconds encountered by a T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.3.3 | TabledsxT1E1IfAttArchiveStatsTable | not-accessible | current | A list of T1/E1 interface test status entries |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.3.3.1 | RowdsxT1E1IfAttArchiveStatsEntry | not-accessible | current | An entry containing status entry for each currently active T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.3.3.1.1 | ColumndsxT1E1IfAttArchiveInterval | not-accessible | current | Time interval for archiving the statistics. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.3.3.1.2 | ColumndsxT1E1IfAttArchiveStatsEEV | read-only | current | Invoke the configured test. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.3.3.1.3 | ColumndsxT1E1IfAttArchiveStatsES | read-only | current | The number of Near End Errored Seconds encoun- tered by a T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.3.3.1.4 | ColumndsxT1E1IfAttArchiveStatsUAS | read-only | current | The number of Unavailable Seconds encountered by a T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.3.3.1.5 | ColumndsxT1E1IfAttArchiveStatsBES | read-only | current | The number of Bursty Errored Seconds (BESs) encountered by a T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.3.3.1.6 | ColumndsxT1E1IfAttArchiveStatsSES | read-only | current | The number of Near End Severely Errored Seconds encountered by a T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.3.3.1.7 | ColumndsxT1E1IfAttArchiveStatsLOFC | read-only | current | Count of loss of frames. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.3.3.1.8 | ColumndsxT1E1IfAttArchiveStatsCSS | read-only | current | The number of Near End Controlled Slip Seconds encountered by a T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.4 | NodedsxT1E1IfIetfStatsGroup | |||
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.4.1 | TabledsxT1E1IfIetfCurrentStatsTable | not-accessible | current | A list of T1/E1 interface test status entries |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.4.1.1 | RowdsxT1E1IfIetfCurrentStatsEntry | not-accessible | current | An entry containing status entry for each currently active T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.4.1.1.1 | ColumndsxT1E1IfIetfCurrentStatsUASState | read-only | current | The number of seconds that have elapsed since the beginning of the IETF current error-measurement period. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.4.1.1.2 | ColumndsxT1E1IfIetfCurrentStatsTimeInCurrent | read-only | current | The number of seconds that have elapsed since the beginning of the IETF current error-measurement period. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.4.1.1.3 | ColumndsxT1E1IfIetfCurrentStatsES | read-only | current | The number of IETF Errored Seconds encoun- tered by a T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.4.1.1.4 | ColumndsxT1E1IfIetfCurrentStatsSES | read-only | current | The number of Far End Severely Errored Seconds encountered by a T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.4.1.1.5 | ColumndsxT1E1IfIetfCurrentStatsSEFS | read-only | current | The number of IETF Severely Errored Framing Seconds encountered by a T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.4.1.1.6 | ColumndsxT1E1IfIetfCurrentStatsUAS | read-only | current | The number of Unavailable Seconds encountered by a T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.4.1.1.7 | ColumndsxT1E1IfIetfCurrentStatsCSS | read-only | current | The number of IETF Controlled Slip Seconds encountered by a T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.4.1.1.8 | ColumndsxT1E1IfIetfCurrentStatsPCV | read-only | current | The number of IETF Path Coding Violations reported via the far end block error count en- countered by a T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.4.1.1.9 | ColumndsxT1E1IfIetfCurrentStatsLES | read-only | current | The number of IETF Line Errored Seconds en- countered by a T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.4.1.1.10 | ColumndsxT1E1IfIetfCurrentStatsBES | read-only | current | The number of Bursty Errored Seconds (BESs) encountered by a T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.4.1.1.11 | ColumndsxT1E1IfIetfCurrentStatsDM | read-only | current | The number of Degraded Minutes (DMs) encoun- tered by a T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.4.1.1.12 | ColumndsxT1E1IfIetfCurrentStatsLCV | read-only | current | Invoke the configured test. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.4.2 | TabledsxT1E1IfIetfTotalStatsTable | not-accessible | current | A list of T1/E1 interface test status entries |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.4.2.1 | RowdsxT1E1IfIetfTotalStatsEntry | not-accessible | current | An entry containing status entry for each currently active T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.4.2.1.1 | ColumndsxT1E1IfIetfTotalStatsES | read-only | current | The number of IETF Errored Seconds encoun- tered by a T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.4.2.1.2 | ColumndsxT1E1IfIetfTotalStatsSES | read-only | current | The number of IETF Severely Errored Seconds encountered by a T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.4.2.1.3 | ColumndsxT1E1IfIetfTotalStatsSEFS | read-only | current | The number of IETF Severely Errored Framing Seconds encountered by a T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.4.2.1.4 | ColumndsxT1E1IfIetfTotalStatsUAS | read-only | current | The number of Unavailable Seconds encountered by a T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.4.2.1.5 | ColumndsxT1E1IfIetfTotalStatsCSS | read-only | current | The number of IETF Controlled Slip Seconds encountered by a T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.4.2.1.6 | ColumndsxT1E1IfIetfTotalStatsPCV | read-only | current | The number of IETF Path Coding Violations reported via the far end block error count en- countered by a T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.4.2.1.7 | ColumndsxT1E1IfIetfTotalStatsLES | read-only | current | The number of IETF Line Errored Seconds en- countered by a T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.4.2.1.8 | ColumndsxT1E1IfIetfTotalStatsBES | read-only | current | The number of Bursty Errored Seconds (BESs) encountered by a T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.4.2.1.9 | ColumndsxT1E1IfIetfTotalStatsDM | read-only | current | The number of Degraded Minutes (DMs) encoun- tered by a T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.4.2.1.10 | ColumndsxT1E1IfIetfTotalStatsLCV | read-only | current | Invoke the configured test. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.4.3 | TabledsxT1E1IfIetfArchiveStatsTable | not-accessible | current | A list of T1/E1 interface test status entries |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.4.3.1 | RowdsxT1E1IfIetfArchiveStatsEntry | not-accessible | current | An entry containing status entry for each currently active T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.4.3.1.1 | ColumndsxT1E1IfIetfArchiveStatsInterval | not-accessible | current | The number of seconds that have elapsed since the beginning of the IETF current error-measurement period. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.4.3.1.2 | ColumndsxT1E1IfIetfArchiveStatsES | read-only | current | The number of IETF Errored Seconds encoun- tered by a T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.4.3.1.3 | ColumndsxT1E1IfIetfArchiveStatsSES | read-only | current | The number of IETF Severely Errored Seconds encountered by a T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.4.3.1.4 | ColumndsxT1E1IfIetfArchiveStatsSEFS | read-only | current | The number of IETF Severely Errored Framing Seconds encountered by a T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.4.3.1.5 | ColumndsxT1E1IfIetfArchiveStatsUAS | read-only | current | The number of Unavailable Seconds encountered by a T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.4.3.1.6 | ColumndsxT1E1IfIetfArchiveStatsCSS | read-only | current | The number of IETF Controlled Slip Seconds encountered by a T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.4.3.1.7 | ColumndsxT1E1IfIetfArchiveStatsPCV | read-only | current | The number of IETF Path Coding Violations reported via the far end block error count en- countered by a T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.4.3.1.8 | ColumndsxT1E1IfIetfArchiveStatsLES | read-only | current | The number of IETF Line Errored Seconds en- countered by a T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.4.3.1.9 | ColumndsxT1E1IfIetfArchiveStatsBES | read-only | current | The number of Bursty Errored Seconds (BESs) encountered by a T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.4.3.1.10 | ColumndsxT1E1IfIetfArchiveStatsDM | read-only | current | The number of Degraded Minutes (DMs) encoun- tered by a T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.4.3.1.11 | ColumndsxT1E1IfIetfArchiveStatsLCV | read-only | current | Invoke the configured test. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.5 | NodedsxT1E1IfUserStatsGroup | |||
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.5.1 | TabledsxT1E1IfUserCurrentStatsTable | not-accessible | current | A list of T1/E1 interface test status entries |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.5.1.1 | RowdsxT1E1IfUserCurrentStatsEntry | not-accessible | current | An entry containing status entry for each currently active T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.5.1.1.1 | ColumndsxT1E1IfUserCurrentStatsUASState | read-only | current | Current state of availablity of T1/E1 interface |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.5.1.1.2 | ColumndsxT1E1IfUserCurrentStatsTimeInCurrent | read-only | current | The number of seconds that have elapsed since the beginning of the IETF current error-measurement period. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.5.1.1.3 | ColumndsxT1E1IfUserCurrentStatsEEV | read-only | current | Invoke the configured test. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.5.1.1.4 | ColumndsxT1E1IfUserCurrentStatsES | read-only | current | The number of Errored Seconds encoun- tered by a T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.5.1.1.5 | ColumndsxT1E1IfUserCurrentStatsUAS | read-only | current | The number of Unavailable Seconds encountered by a T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.5.1.1.6 | ColumndsxT1E1IfUserCurrentStatsBES | read-only | current | The number of Bursty Errored Seconds (BESs) encountered by a T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.5.1.1.7 | ColumndsxT1E1IfUserCurrentStatsSES | read-only | current | The number of Severely Errored Seconds encountered by a T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.5.1.1.8 | ColumndsxT1E1IfUserCurrentStatsLOFC | read-only | current | Count of loss of frames. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.5.1.1.9 | ColumndsxT1E1IfUserCurrentStatsCSS | read-only | current | The number of Controlled Slip Seconds encountered by a T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.5.1.1.10 | ColumndsxT1E1IfUserCurrentStatsBPV | read-only | current | The number of Bipolar Violation Error Event occurred for this interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.5.1.1.11 | ColumndsxT1E1IfUserCurrentStatsOOF | read-only | current | The number of Out of Frame Defect occurred for this interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.5.1.1.12 | ColumndsxT1E1IfUserCurrentStatsCRC | read-only | current | The number of CRC Defects that occurred for this interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.5.2 | TabledsxT1E1IfUserTotalStatsTable | not-accessible | current | A list of T1/E1 interface test status entries |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.5.2.1 | RowdsxT1E1IfUserTotalStatsEntry | not-accessible | current | An entry containing status entry for each currently active T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.5.2.1.1 | ColumndsxT1E1IfUserTotalStatsDay | not-accessible | current | Total number of days elapsed since event recording started for this interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.5.2.1.2 | ColumndsxT1E1IfUserTotalStatsEEV | read-only | current | Invoke the configured test. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.5.2.1.3 | ColumndsxT1E1IfUserTotalStatsES | read-only | current | The number of Errored Seconds encoun- tered by a T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.5.2.1.4 | ColumndsxT1E1IfUserTotalStatsUAS | read-only | current | The number of Unavailable Seconds encountered by a T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.5.2.1.5 | ColumndsxT1E1IfUserTotalStatsBES | read-only | current | The number of Bursty Errored Seconds (BESs) encountered by a T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.5.2.1.6 | ColumndsxT1E1IfUserTotalStatsSES | read-only | current | The number of Severely Errored Seconds encountered by a T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.5.2.1.7 | ColumndsxT1E1IfUserTotalStatsLOFC | read-only | current | Count of loss of frames. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.5.2.1.8 | ColumndsxT1E1IfUserTotalStatsCSS | read-only | current | The number of Controlled Slip Seconds encountered by a T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.5.2.1.9 | ColumndsxT1E1IfUserTotalStatsBPV | read-only | current | The number of Bipolar Violation Error Event occurred for this interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.5.2.1.10 | ColumndsxT1E1IfUserTotalStatsOOF | read-only | current | The number of Out of Frame Defect occurred for this interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.5.2.1.11 | ColumndsxT1E1IfUserTotalStatsCRC | read-only | current | The number of Out of Frame Defect occurred for this interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.5.3 | TabledsxT1E1IfUserLifetimeStatsTable | not-accessible | current | Table maintained to keep the statistics for the whole lifetime of the system since it is first powered on. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.5.3.1 | RowdsxT1E1IfUserLifetimeStatsEntry | not-accessible | current | An entry containing status entry for each currently active T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.5.3.1.1 | ColumndsxT1E1IfUserLifetimeStatsEEV | read-only | current | The Total number of Error Events occured during since the system brought up |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.5.3.1.2 | ColumndsxT1E1IfUserLifetimeStatsES | read-only | current | The number of Errored Seconds encoun- tered by a T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.5.3.1.3 | ColumndsxT1E1IfUserLifetimeStatsUAS | read-only | current | The number of Unavailable Seconds encountered by a T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.5.3.1.4 | ColumndsxT1E1IfUserLifetimeStatsBES | read-only | current | The number of Bursty Errored Seconds (BESs) encountered by a T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.5.3.1.5 | ColumndsxT1E1IfUserLifetimeStatsSES | read-only | current | The number of Severely Errored Seconds encountered by a T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.5.3.1.6 | ColumndsxT1E1IfUserLifetimeStatsLOFC | read-only | current | Count of loss of frames. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.5.3.1.7 | ColumndsxT1E1IfUserLifetimeStatsCSS | read-only | current | The number of Controlled Slip Seconds encountered by a T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.5.3.1.8 | ColumndsxT1E1IfUserLifetimeStatsBPV | read-only | current | The number of Bipolar Violation Error Event occurred for this interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.5.3.1.9 | ColumndsxT1E1IfUserLifetimeStatsOOF | read-only | current | The number of Out of Frame Defect occurred for this interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.5.3.1.10 | ColumndsxT1E1IfUserLifetimeStatsCRC | read-only | current | The number of Out of Frame Defect occurred for this interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.5.4 | TabledsxT1E1IfUserArchiveStatsTable | not-accessible | current | The table maintained to keep last 24 hrs statistics in |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.5.4.1 | RowdsxT1E1IfUserArchiveStatsEntry | not-accessible | current | An entry containing status entry for each currently active T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.5.4.1.1 | ColumndsxT1E1IfUserArchiveStatsInterval | not-accessible | current | The number of seconds that have elapsed since the beginning of the IETF current error-measurement period. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.5.4.1.2 | ColumndsxT1E1IfUserArchiveStatsEEV | read-only | current | Error Events collected over each period of 15 mins |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.5.4.1.3 | ColumndsxT1E1IfUserArchiveStatsES | read-only | current | The number of Errored Seconds encoun- tered by a T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.5.4.1.4 | ColumndsxT1E1IfUserArchiveStatsUAS | read-only | current | The number of Unavailable Seconds encountered by a T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.5.4.1.5 | ColumndsxT1E1IfUserArchiveStatsBES | read-only | current | The number of Bursty Errored Seconds (BESs) encountered by a T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.5.4.1.6 | ColumndsxT1E1IfUserArchiveStatsSES | read-only | current | The number of Severely Errored Seconds encountered by a T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.5.4.1.7 | ColumndsxT1E1IfUserArchiveStatsLOFC | read-only | current | Count of loss of frames. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.5.4.1.8 | ColumndsxT1E1IfUserArchiveStatsCSS | read-only | current | The number of Controlled Slip Seconds encountered by a T1/E1 interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.5.4.1.9 | ColumndsxT1E1IfUserArchiveStatsBPV | read-only | current | The number of Bipolar Violation Error Event occurred for this interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.5.4.1.10 | ColumndsxT1E1IfUserArchiveStatsOOF | read-only | current | The number of Out of Frame Defect occurred for this interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.1.3.5.4.1.11 | ColumndsxT1E1IfUserArchiveStatsCRC | read-only | current | The number of Out of Frame Defect occurred for this interface. |
| 1.3.6.1.4.1.3174.2.7.1.2.2 | NodedsxT1E1Traps | |||
| 1.3.6.1.4.1.3174.2.7.1.2.2.1 | NodedsxT1E1AlarmOnTrap | T1/E1 interface alarm traps for the Alarm On state. | ||
| 1.3.6.1.4.1.3174.2.7.1.2.2.1 | NodedsxT1E1TrapVariables | |||
| 1.3.6.1.4.1.3174.2.7.1.2.2.1.1 | ScalardsxT1E1Number | not-accessible | current | This is the T1/E1 number of the interface from where this alarm is originating. |
| 1.3.6.1.4.1.3174.2.7.1.2.2.1.2 | ScalardsxT1E1Type | not-accessible | current | This variable indicates whether this T1/E1 interface is with in a T3/E3 or by itself. |
| 1.3.6.1.4.1.3174.2.7.1.2.2.1.3 | ScalardsxT1E1T3Number | not-accessible | current | This variable is applicable only if dsxT1E1Type is 'type_t1_within_ct3' and it indicates the T3/E3 interface number this T1 belongs to. |
| 1.3.6.1.4.1.3174.2.7.1.2.2.1.4 | ScalardsxT1E1AlarmType | not-accessible | current | Status of alarms for the T1/E1 interface RRAI - Recieve RAI (Recieve Alarm Indication), RLOS - Recieve Loss Of Sync, REXZ - Recieve Excessive Zeros, LORC - Los… |
| 1.3.6.1.4.1.3174.2.7.1.2.2.2 | NodedsxT1E1AlarmOffTrap | T1/E1 interface alarm trap for the Alarm Off state. |