MIB Viewer

TIARA-QOS-MIB

46 objects
QoS MIB for configuring Quality of Service parameters on a WAN interface.
OIDNameAccessStatusDescription
1.3.6.1.4.1.3174.2.17IdentitytiaraQosMibQoS MIB for configuring Quality of Service parameters on a WAN interface.
1.3.6.1.4.1.3174.2.17.1TabletiaraRedConfigTablenot-accessiblecurrentThis table consists of all parameters that are needed to configure RED on a WAN interface.
1.3.6.1.4.1.3174.2.17.1.1RowtiaraRedConfigEntrynot-accessiblecurrentDescribes an entry in the RED configuration table.
1.3.6.1.4.1.3174.2.17.1.1.1ColumnredTxMaxThresholdread-writecurrentThis is the upper limit for the average queue size for a given WAN interface. If the average queue size exceeds this value, RED drops all packets that are dest…
1.3.6.1.4.1.3174.2.17.1.1.2ColumnredTxMinThresholdread-writecurrentThis is the threshold at which RED begins dropping packets. When the average queue size for a WAN interface increases above the minimum threshold, RED drops pa…
1.3.6.1.4.1.3174.2.17.1.1.3ColumnredTxWqBiasFactorread-writecurrentThis is the exponential weighting/bias factor used to calculate the moving average of the queue size. A higher value smooths out the peaks and troughs in the i…
1.3.6.1.4.1.3174.2.17.1.1.4ColumnredTxEnableread-writecurrentThis is used to enable or disable RED on a WAN interface. RED is enabled by default.
1.3.6.1.4.1.3174.2.17.2TabletiaraRedStatTablenot-accessiblecurrentThis table gives RED statistics for a given WAN interface.
1.3.6.1.4.1.3174.2.17.2.1RowtiaraRedStatEntrynot-accessiblecurrentDescribes an entry in the RED statistics table.
1.3.6.1.4.1.3174.2.17.2.1.1ColumnredTxLoanedCountread-onlycurrentThis is the instantaneous queue size measured by RED for a given WAN interface.
1.3.6.1.4.1.3174.2.17.2.1.2ColumnredTxMaxLoanedCountread-onlycurrentThis is the maximum instantaneous queue size seen on a given WAN interface. In other words, it is the maximum number of packets that had been queued for transm…
1.3.6.1.4.1.3174.2.17.2.1.3ColumnredTxAvgQueueSizeread-onlycurrentThis is the current value of the average queue size on a given WAN interface and is a measure of congestion on that interface. RED attempts to keep this value …
1.3.6.1.4.1.3174.2.17.2.1.4ColumnredTxMaxAvgQueueSizeread-onlycurrentThis is the maximum value that the average queue size on a given WAN interface has reached.
1.3.6.1.4.1.3174.2.17.2.1.5ColumnredTxDropRateread-onlycurrentThis is the rate at which RED drops packets when the average queue size is between the minimum and maximum thresholds. A value of N indicates that one out of N…
1.3.6.1.4.1.3174.2.17.2.1.6ColumnredTxMinThresholdSuccessread-onlycurrentThis is the number of packets allowed by RED while the average queue size (for a given WAN interface) is below the minimum threshold.
1.3.6.1.4.1.3174.2.17.2.1.7ColumnredTxMaxThresholdFailureread-onlycurrentThis is the number of packets dropped by RED when the average queue size exceeds the maximum threshold.
1.3.6.1.4.1.3174.2.17.2.1.8ColumnredTxMinMaxRangeSuccessread-onlycurrentThis is the number of packets allowed by RED while the average queue size is between the minimum and maximum thresholds.
1.3.6.1.4.1.3174.2.17.2.1.9ColumnredTxMinMaxRangeFailureread-onlycurrentThis is the number of packets dropped by RED while the average queue size is between the minimum and maximum thresholds.
1.3.6.1.4.1.3174.2.17.2.1.10ColumnredTxControlSuccessread-onlycurrentThis is the number of control packets (for e.g., routing updates) that need to be dropped, but are allowed by RED. Routing updates are detected by RED and are …
1.3.6.1.4.1.3174.2.17.3TabletiaraCbqConfigTablenot-accessiblecurrentThis table consists of all the parameters required to configure a CBQ traffic class on an interface.
1.3.6.1.4.1.3174.2.17.3.1RowtiaraCbqConfigEntrynot-accessiblecurrentDescribes an entry in the CBQ config table.
1.3.6.1.4.1.3174.2.17.3.1.1ColumncbqClassIndexread-onlycurrent
1.3.6.1.4.1.3174.2.17.3.1.2ColumncbqClassNameread-onlycurrent
1.3.6.1.4.1.3174.2.17.3.1.3ColumncbqClassParentNameread-onlycurrent
1.3.6.1.4.1.3174.2.17.3.1.4ColumncbqClassBandwidthread-onlycurrent
1.3.6.1.4.1.3174.2.17.3.1.5ColumncbqClassBurstToleranceread-onlycurrent
1.3.6.1.4.1.3174.2.17.3.1.6ColumncbqClassKeyTyperead-onlycurrent
1.3.6.1.4.1.3174.2.17.3.1.7ColumncbqClassIsDefaultread-onlycurrent
1.3.6.1.4.1.3174.2.17.3.1.8ColumncbqClassAverageBandwidthread-onlycurrent
1.3.6.1.4.1.3174.2.17.4TabletiaraCbqClassKeyTablenot-accessiblecurrent
1.3.6.1.4.1.3174.2.17.4.1RowtiaraCbqClassKeyTableEntrynot-accessiblecurrent
1.3.6.1.4.1.3174.2.17.4.1.1ColumncbqClassKeyIndexread-onlycurrent
1.3.6.1.4.1.3174.2.17.4.1.2ColumncbqKeyClassNameread-onlycurrent
1.3.6.1.4.1.3174.2.17.4.1.3ColumncbqClassKeyVlanIdread-onlycurrent
1.3.6.1.4.1.3174.2.17.4.1.4ColumncbqClassKeyIpAddressread-onlycurrent
1.3.6.1.4.1.3174.2.17.4.1.5ColumncbqClassKeyIpNetMaskread-onlycurrent
1.3.6.1.4.1.3174.2.17.4.1.6ColumncbqClassKeyPortread-onlycurrent
1.3.6.1.4.1.3174.2.17.4.1.7ColumncbqClassKeyProtocolTyperead-onlycurrent
1.3.6.1.4.1.3174.2.17.5TabletiaraCbqStatsTablenot-accessiblecurrentThis table gives CBQ's traffic class statistics for a given TIARA interface.
1.3.6.1.4.1.3174.2.17.5.1RowtiaraCbqStatsEntrynot-accessiblecurrentDescribes an entry in the CBQ's statistics table.
1.3.6.1.4.1.3174.2.17.5.1.1ColumncbqStatsClassNameread-onlycurrent
1.3.6.1.4.1.3174.2.17.5.1.2ColumncbqClassPacketsForwardedread-onlycurrent
1.3.6.1.4.1.3174.2.17.5.1.3ColumncbqClassBytesForwardedread-onlycurrent
1.3.6.1.4.1.3174.2.17.5.1.4ColumncbqClassPacketsDroppedread-onlycurrent
1.3.6.1.4.1.3174.2.17.5.1.5ColumncbqClassBytesDroppedread-onlycurrent
1.3.6.1.4.1.3174.2.17.5.1.6ColumncbqClassBurstExceedCountread-onlycurrent