TIARA-V35-MIB
24 objects
MIB definitions for Tiara V35 module.
Imported Objects
| RFC-1215 | TRAP-TYPE |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | -- TruthValue |
| TIARA-NETWORKS-SMI | tiaraInterfaces |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3174.2.7.3 | IdentitytiaraV35Mib | MIB definitions for Tiara V35 module. | ||
| 1.3.6.1.4.1.3174.2.7.3.1 | Tablev35ConfigTable | not-accessible | current | Tiara Networks V35 interface-related configurable parameters are listed in this table. |
| 1.3.6.1.4.1.3174.2.7.3.1.1 | Rowv35ConfigTableEntry | not-accessible | current | V35 table entry. |
| 1.3.6.1.4.1.3174.2.7.3.1.1.1 | Columnv35IfIndex | not-accessible | current | An integer value that is an index in the entries of the ifTable (MIB-II) with a V.35 interface type. |
| 1.3.6.1.4.1.3174.2.7.3.1.1.2 | Columnv35ConfigClockRate | read-write | current | Configures the clock rate for V35. |
| 1.3.6.1.4.1.3174.2.7.3.1.1.3 | Columnv35ConfigClockSource | read-write | current | Configures the clock source for V35. It can be either internal or line. |
| 1.3.6.1.4.1.3174.2.7.3.1.1.4 | Columnv35ConfigMode | read-write | current | Configures the mode for V35 to be either dce or dte. |
| 1.3.6.1.4.1.3174.2.7.3.1.1.5 | Columnv35ConfigCRC | read-write | current | Configures the cyclic redundancy check for V35 to be either 16 or 32 bits. |
| 1.3.6.1.4.1.3174.2.7.3.1.1.6 | Columnv35ConfigDataMode | read-write | current | Configures the data for V.35 to be either normal or inverted. |
| 1.3.6.1.4.1.3174.2.7.3.1.1.7 | Columnv35ConfigFlowControl | read-write | current | Configures the hardware flow control for V.35 to be either on or off. |
| 1.3.6.1.4.1.3174.2.7.3.2 | Tablev35StatsTable | not-accessible | current | Tiara Networks V35 interface-related status variables are listed in this table. |
| 1.3.6.1.4.1.3174.2.7.3.2.1 | Rowv35StatsTableEntry | not-accessible | current | V35 statistics table entry. |
| 1.3.6.1.4.1.3174.2.7.3.2.1.1 | Columnv35StatsAlarmStatus | read-only | current | Specifies the status of the V35 alarm. If the bit is set, it indicates that the alarm state is on. Alarm bits are mode dependent; they are interpreted as follo… |
| 1.3.6.1.4.1.3174.2.7.3.2.1.2 | Columnv35StatsFramesIn | read-only | current | Specifies the number of incoming frames. |
| 1.3.6.1.4.1.3174.2.7.3.2.1.3 | Columnv35StatsFramesOut | read-only | current | Specifies the number of outgoing frames. |
| 1.3.6.1.4.1.3174.2.7.3.2.1.4 | Columnv35StatsOctetsIn | read-only | current | Specifies the number of incoming octets. |
| 1.3.6.1.4.1.3174.2.7.3.2.1.5 | Columnv35StatsOctetsOut | read-only | current | Specifies the number of outgoing octets. |
| 1.3.6.1.4.1.3174.2.7.3.2.1.6 | Columnv35StatsCRCErrors | read-only | current | Specifies the number of CRC errors that have been identified so far. |
| 1.3.6.1.4.1.3174.2.7.3.3 | Nodev35Traps | |||
| 1.3.6.1.4.1.3174.2.7.3.3.1 | Nodev35AlarmOnTrap | V35 alarm traps for the Alarm On state. | ||
| 1.3.6.1.4.1.3174.2.7.3.3.1 | Nodev35TrapVariables | |||
| 1.3.6.1.4.1.3174.2.7.3.3.1.1 | Scalarv35SlotNumber | not-accessible | current | This V35 trap variable specifies the slot number of the V35 interface. |
| 1.3.6.1.4.1.3174.2.7.3.3.1.2 | Scalarv35AlarmType | not-accessible | current | This V35 alarm type specifies the type of the alarm trap generated by the agent for the V35 interface. Alarm bits are mode dependent; they are interpreted as f… |
| 1.3.6.1.4.1.3174.2.7.3.3.2 | Nodev35AlarmOffTrap | V35 alarm traps for the Alarm Off state. |