TN-SA-MIB
227 objects
A MIB module provides Service Activation management interface.
Imported Objects
| ENTITY-MIB | entPhysicalIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 enterprises IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.868.2.5.108.2 | IdentitytnSaMIB | A MIB module provides Service Activation management interface. | ||
| 1.3.6.1.4.1.868.2.5.108.2.1 | ScalartnSAProfileNextID | read-only | current | This object contains the next profile ID to use when creating entries in the tnSAProfileTable. When creating a new conceptual row (configuration entry) in tnSA… |
| 1.3.6.1.4.1.868.2.5.108.2.2 | ScalartnSATestNextID | read-only | current | This object contains the next Test ID to use when creating entries in the tnSATestTable. When creating a new conceptual row (configuration entry) in tnSATestTa… |
| 1.3.6.1.4.1.868.2.5.108.2.3 | ScalartnSASysConfPeerCommunicationProto | read-write | current | Enable/disable the peer communication protocol. If this attribute is disabled a NID is unable to support unidirectional and bidirectional RFC2544 tests (both a… |
| 1.3.6.1.4.1.868.2.5.108.2.4 | ScalartnSASysConfCollectorState | read-write | current | Collector state. The Collector Flag determines will the SA module accept SA test requests from outside. |
| 1.3.6.1.4.1.868.2.5.108.2.5 | ScalartnSASysTestMacAddress | read-only | current | Test MAC address. The Test MAC Address is used as source MAC address of the generating frames. |
| 1.3.6.1.4.1.868.2.5.108.2.6 | ScalartnSAPtpClockNum | read-write | current | |
| 1.3.6.1.4.1.868.2.5.108.2.7 | TabletnSAProfileTable | not-accessible | current | The Service Activation Profile Table. Entries in this table represent SA profiles. The index structure is the profile ID. |
| 1.3.6.1.4.1.868.2.5.108.2.7.1 | RowtnSAProfileEntry | not-accessible | current | An entry in the tnSAProfileTable. |
| 1.3.6.1.4.1.868.2.5.108.2.7.1.1 | ColumntnSAProfileID | not-accessible | current | The profile entry ID. |
| 1.3.6.1.4.1.868.2.5.108.2.7.1.2 | ColumntnSAProfileName | read-write | current | The name of the profile. |
| 1.3.6.1.4.1.868.2.5.108.2.7.1.3 | ColumntnSAProfileFrameLossRatio | read-write | current | Acceptable frame loss ratio (expressed in percentage, with 2 decimals (i.e. 99.99 %). |
| 1.3.6.1.4.1.868.2.5.108.2.7.1.4 | ColumntnSAProfileCbsLineRate | read-write | current | Line rate at which burst traffic should be sent for the Back-to-back frames test. In Mbps. |
| 1.3.6.1.4.1.868.2.5.108.2.7.1.5 | ColumntnSAProfileFrameSizeMix | read-write | current | Traffic frame size mix, for throughput tests. |
| 1.3.6.1.4.1.868.2.5.108.2.7.1.6 | ColumntnSAProfileRateDecStep | read-write | current | Rate decrease step size, in percentage. Default 25%. |
| 1.3.6.1.4.1.868.2.5.108.2.7.1.7 | ColumntnSAProfileRateStepLength | read-write | current | Rate step length, in seconds. |
| 1.3.6.1.4.1.868.2.5.108.2.7.1.8 | ColumntnSAProfileDirectionality | read-write | current | Directionality of the tests: uni-directional, bi-directional or loopback based. |
| 1.3.6.1.4.1.868.2.5.108.2.7.1.9 | ColumntnSAProfileYellowPcpList | read-write | current | List of PCP values corresponding to yellow frame. Bitmask. Each bit number [0..7] corresponds to a PCP value [0..7]. Bit 0 corresponds to PCP 0, etc. Example: … |
| 1.3.6.1.4.1.868.2.5.108.2.7.1.10 | ColumntnSAProfileStepsToExecute | read-write | current | List of tests to execute � bitmask: -Throughput (bit 1) -Latency (bit 2) -Frame Loss Rate (bit 3) -Back To Back Frames (bit 4) |
| 1.3.6.1.4.1.868.2.5.108.2.7.1.11 | ColumntnSAProfileRefCounter | read-only | current | Readonly field contains number of tests that use this profile. Profile can be deleted if it has no assigned tests. |
| 1.3.6.1.4.1.868.2.5.108.2.7.1.12 | ColumntnSAProfileRowStatus | read-create | current | The row status. To create a row, set the instance of this variable for the new row to 'createAndGo'. To delete a row, set the instance of this variable for the… |
| 1.3.6.1.4.1.868.2.5.108.2.8 | TabletnSAFrameFormatProfileTable | not-accessible | current | The SA Profile Frame Format Table. Entries in this table represent Frame Format attributes. Each row in the table conceptually augments the entries in the tnSA… |
| 1.3.6.1.4.1.868.2.5.108.2.8.1 | RowtnSAFrameFormatProfileEntry | not-accessible | current | An entry in the tnSAFrameFormatProfileTable. |
| 1.3.6.1.4.1.868.2.5.108.2.8.1.1 | ColumntnSAFrameFormatProfileFrameLevel | read-write | current | Frame level � L2 or L3. |
| 1.3.6.1.4.1.868.2.5.108.2.8.1.2 | ColumntnSAFrameFormatProfilePaylodFiller | read-write | current | Paylod filler. |
| 1.3.6.1.4.1.868.2.5.108.2.8.1.3 | ColumntnSAFrameFormatProfileEncapsulationL2 | read-write | current | Encapsulation type for L2 frames. |
| 1.3.6.1.4.1.868.2.5.108.2.8.1.4 | ColumntnSAFrameFormatProfileEncapsulationL3 | read-write | current | Encapsulation type for L3 frames. |
| 1.3.6.1.4.1.868.2.5.108.2.8.1.5 | ColumntnSAFrameFormatProfileEthType | read-write | current | Custom Eth-Type for L2 ETH-TST frames. |
| 1.3.6.1.4.1.868.2.5.108.2.8.1.6 | ColumntnSAFrameFormatProfileIpDscp | read-write | current | DSCP value for L3 IP frames. |
| 1.3.6.1.4.1.868.2.5.108.2.8.1.7 | ColumntnSAFrameFormatProfileIpEcn | read-write | current | ECN value for L3 IP frames. |
| 1.3.6.1.4.1.868.2.5.108.2.8.1.8 | ColumntnSAFrameFormatProfileIpFlags | read-write | current | Flags value for L3 IP frames. |
| 1.3.6.1.4.1.868.2.5.108.2.8.1.9 | ColumntnSAFrameFormatProfileIpTtl | read-write | current | TTL value for L3 IP frames. |
| 1.3.6.1.4.1.868.2.5.108.2.8.1.10 | ColumntnSAFrameFormatProfileUdpSrcPort | read-write | current | Source port for L3 IP/UDP frames. |
| 1.3.6.1.4.1.868.2.5.108.2.8.1.11 | ColumntnSAFrameFormatProfileUdpDstPort | read-write | current | Destination port for L3 IP/UDP frames. |
| 1.3.6.1.4.1.868.2.5.108.2.8.1.12 | ColumntnSAFrameFormatProfileTcpSrcPort | read-write | current | Source port for L3 IP/TCP frames. |
| 1.3.6.1.4.1.868.2.5.108.2.8.1.13 | ColumntnSAFrameFormatProfileTcpDstPort | read-write | current | Destination port for L3 IP/TCP frames. |
| 1.3.6.1.4.1.868.2.5.108.2.8.1.14 | ColumntnSAFrameFormatProfileTcpSeqNum | read-write | current | Sequence number for L3 IP/TCP frames. |
| 1.3.6.1.4.1.868.2.5.108.2.8.1.15 | ColumntnSAFrameFormatProfileTcpAckNum | read-write | current | ACK number for L3 IP/TCP frames. |
| 1.3.6.1.4.1.868.2.5.108.2.8.1.16 | ColumntnSAFrameFormatProfileTcpControlBits | read-write | current | Control bits for L3 IP/TCP frames. |
| 1.3.6.1.4.1.868.2.5.108.2.8.1.17 | ColumntnSAFrameFormatProfileTcpWindowSize | read-write | current | Window size for L3 IP/TCP frames. |
| 1.3.6.1.4.1.868.2.5.108.2.8.1.18 | ColumntnSAFrameFormatProfileLlcSnapOui | read-write | current | LLC/SNAP OUI field � 3 bytes |
| 1.3.6.1.4.1.868.2.5.108.2.8.1.19 | ColumntnSAFrameFormatProfileLlcSnapProto | read-write | current | LLC/SNAP protocol field |
| 1.3.6.1.4.1.868.2.5.108.2.8.1.20 | ColumntnSAFrameFormatProfileIpDestIpAddress | read-write | current | Destination IP address |
| 1.3.6.1.4.1.868.2.5.108.2.8.1.21 | ColumntnSAFrameFormatProfileIpSrcIpAddress | read-write | current | Source IP address |
| 1.3.6.1.4.1.868.2.5.108.2.8.1.22 | ColumntnSAFrameFormatProfilePayloadFillPattern | read-write | current | Payload filler pattern(value entered in decimal). |
| 1.3.6.1.4.1.868.2.5.108.2.8.1.23 | ColumntnSAFrameFormatProfileMEGLevel | read-write | current | Level of MEG that is used by ETH-TST frames. |
| 1.3.6.1.4.1.868.2.5.108.2.9 | TabletnDmBinThresholdTable | not-accessible | current | Table of DM bin thresholds. |
| 1.3.6.1.4.1.868.2.5.108.2.9.1 | RowtnDmBinThresholdEntry | not-accessible | current | An entry in the SA tnDmBinThresholdTable. |
| 1.3.6.1.4.1.868.2.5.108.2.9.1.1 | ColumntnDmBinThresholdIndex | not-accessible | current | DM bin threshold index. |
| 1.3.6.1.4.1.868.2.5.108.2.9.1.2 | ColumntnDmBinThresholdValue | read-create | current | DM bin threshold value in usec. Zero value is used to delete threshold. |
| 1.3.6.1.4.1.868.2.5.108.2.10 | TabletnDmvBinThresholdTable | not-accessible | current | Table of DMV bin thresholds. |
| 1.3.6.1.4.1.868.2.5.108.2.10.1 | RowtnDmvBinThresholdEntry | not-accessible | current | An entry in the SA tnDmvBinThresholdTable. |
| 1.3.6.1.4.1.868.2.5.108.2.10.1.1 | ColumntnDmvBinThresholdIndex | not-accessible | current | DM bin threshold index. |
| 1.3.6.1.4.1.868.2.5.108.2.10.1.2 | ColumntnDmvBinThresholdValue | read-create | current | DM bin threshold value in usec. Zero value is used to delete threshold. |
| 1.3.6.1.4.1.868.2.5.108.2.11 | TabletnSATestTable | not-accessible | current | The SA Test Table. Entries in this table represent Service Activation test attributes. The index structure is the test ID. |
| 1.3.6.1.4.1.868.2.5.108.2.11.1 | RowtnSATestEntry | not-accessible | current | An entry in the tnSATestTable. |
| 1.3.6.1.4.1.868.2.5.108.2.11.1.1 | ColumntnSATestID | not-accessible | current | The test entry ID. |
| 1.3.6.1.4.1.868.2.5.108.2.11.1.2 | ColumntnSATestSAProfileId | read-write | current | The SA profile ID for the test. |
| 1.3.6.1.4.1.868.2.5.108.2.11.1.3 | ColumntnSATestIngressEncapsulationType | read-write | current | VLAN tag encapsulation type. |
| 1.3.6.1.4.1.868.2.5.108.2.11.1.4 | ColumntnSATestIngressInnerVid | read-write | current | Ingress Inner VLAN ID. |
| 1.3.6.1.4.1.868.2.5.108.2.11.1.5 | ColumntnSATestIngressInnerPcp | read-write | current | Ingress Inner PCP value. |
| 1.3.6.1.4.1.868.2.5.108.2.11.1.6 | ColumntnSATestIngressOuterVid | read-write | current | Ingress Outer VLAN ID. |
| 1.3.6.1.4.1.868.2.5.108.2.11.1.7 | ColumntnSATestIngressOuterPcp | read-write | current | Ingress Outer PCP value. |
| 1.3.6.1.4.1.868.2.5.108.2.11.1.8 | ColumntnSATestEgressEncapsulationType | read-write | current | VLAN tag encapsulation type. |
| 1.3.6.1.4.1.868.2.5.108.2.11.1.9 | ColumntnSATestEgressInnerVid | read-write | current | Egress Inner VLAN ID. |
| 1.3.6.1.4.1.868.2.5.108.2.11.1.10 | ColumntnSATestEgressInnerPcp | read-write | current | Egress Inner PCP value. |
| 1.3.6.1.4.1.868.2.5.108.2.11.1.11 | ColumntnSATestEgressOuterVid | read-write | current | Egress Outer VLAN ID. |
| 1.3.6.1.4.1.868.2.5.108.2.11.1.12 | ColumntnSATestEgressOuterPcp | read-write | current | Egress Outer PCP value. |
| 1.3.6.1.4.1.868.2.5.108.2.11.1.13 | ColumntnSATestIngressPort | read-write | current | Ingress port number. |
| 1.3.6.1.4.1.868.2.5.108.2.11.1.14 | ColumntnSATestCollectorIngressPort | read-write | current | Collector's ingress port number. |
| 1.3.6.1.4.1.868.2.5.108.2.11.1.15 | ColumntnSATestCollectorIpAddr | read-write | current | IP address of the collector. |
| 1.3.6.1.4.1.868.2.5.108.2.11.1.16 | ColumntnSATestName | read-write | current | Test name. |
| 1.3.6.1.4.1.868.2.5.108.2.11.1.17 | ColumntnSATestCir | read-write | current | CIR. In Kbps. |
| 1.3.6.1.4.1.868.2.5.108.2.11.1.18 | ColumntnSATestCbs | read-write | current | CBS. In bytes. |
| 1.3.6.1.4.1.868.2.5.108.2.11.1.19 | ColumntnSATestEir | read-write | current | EIR. In Kbps. |
| 1.3.6.1.4.1.868.2.5.108.2.11.1.20 | ColumntnSATestEbs | read-write | current | EBS. In bytes. |
| 1.3.6.1.4.1.868.2.5.108.2.11.1.21 | ColumntnSATestTargettestMacAddr | read-write | current | Target Test MAC address (to be used for Loopback test only). |
| 1.3.6.1.4.1.868.2.5.108.2.11.1.22 | ColumntnSATestAction | read-write | current | This attribute allow start/stop test. |
| 1.3.6.1.4.1.868.2.5.108.2.11.1.23 | ColumntnSATestRowStatus | read-create | current | The row status. To create a row, set the instance of this variable for the new row to 'createAndGo'. To delete a row, set the instance of this variable for the… |
| 1.3.6.1.4.1.868.2.5.108.2.12 | TabletnSACommonTestResultsTable | not-accessible | current | Common test results. |
| 1.3.6.1.4.1.868.2.5.108.2.12.1 | RowtnSACommonTestResultsEntry | not-accessible | current | An entry in the tnSACommonTestResultsTable. |
| 1.3.6.1.4.1.868.2.5.108.2.12.1.1 | ColumntnSACommonTestResultsTestId | not-accessible | current | The report Test ID. |
| 1.3.6.1.4.1.868.2.5.108.2.12.1.2 | ColumntnSACommonTestResultsTestStatus | read-only | current | Test status. |
| 1.3.6.1.4.1.868.2.5.108.2.12.1.3 | ColumntnSACommonTestResultsEgressPort | read-only | current | Egress port number. |
| 1.3.6.1.4.1.868.2.5.108.2.12.1.4 | ColumntnSACommonTestResultsCbsLineRate | read-only | current | Line rate at which burst traffic should be sent for the Back-to-back frames test. In Mbps. |
| 1.3.6.1.4.1.868.2.5.108.2.12.1.5 | ColumntnSACommonTestResultsDirectionality | read-only | current | Directionality of the tests: uni-directional, bi-directional or loopback based. |
| 1.3.6.1.4.1.868.2.5.108.2.12.1.6 | ColumntnSACommonTestResultsFrameLossRatio | read-only | current | Acceptable frame loss ratio (expressed in percentage, with 2 decimals (i.e. 99.99 %). |
| 1.3.6.1.4.1.868.2.5.108.2.12.1.7 | ColumntnSACommonTestResultsYellowPcpList | read-only | current | List of PCP values corresponding to yellow frame. Bitmask. |
| 1.3.6.1.4.1.868.2.5.108.2.12.1.8 | ColumntnSACommonTestResultsFrameSizeMix | read-only | current | Traffic frame size mix, for throughput tests. |
| 1.3.6.1.4.1.868.2.5.108.2.12.1.9 | ColumntnSACommonTestResultsRateDecStep | read-only | current | Rate decrease step size, in percentage. |
| 1.3.6.1.4.1.868.2.5.108.2.12.1.10 | ColumntnSACommonTestResultsRateStepLength | read-only | current | Rate step length, in seconds. |
| 1.3.6.1.4.1.868.2.5.108.2.12.1.11 | ColumntnSACommonTestResultsFrameFormatFrameLevel | read-only | current | Frame level � L2 or L3. |
| 1.3.6.1.4.1.868.2.5.108.2.12.1.12 | ColumntnSACommonTestResultsStepsToExecute | read-only | current | List of tests to execute � bitmask: -Throughput (bit 1) -Latency (bit 2) -Frame Loss Rate (bit 3) -Back To Back Frames (bit 4) |
| 1.3.6.1.4.1.868.2.5.108.2.12.1.13 | ColumntnSACommonTestResultsFrameFormatPaylodFiller | read-only | current | Paylod filler. |
| 1.3.6.1.4.1.868.2.5.108.2.12.1.14 | ColumntnSACommonTestResultsFrameFormatEncapsulationL2 | read-only | current | Encapsulation type for L2 frames. |
| 1.3.6.1.4.1.868.2.5.108.2.12.1.15 | ColumntnSACommonTestResultsFrameFormatEncapsulationL3 | read-only | current | Encapsulation type for L3 frames. |
| 1.3.6.1.4.1.868.2.5.108.2.12.1.16 | ColumntnSACommonTestResultsFrameFormatEthType | read-only | current | Custom Eth-Type for L2 ETH-TST frames. |
| 1.3.6.1.4.1.868.2.5.108.2.12.1.17 | ColumntnSACommonTestResultsFrameFormatIpDscp | read-only | current | DSCP value for L3 IP frames. |
| 1.3.6.1.4.1.868.2.5.108.2.12.1.18 | ColumntnSACommonTestResultsFrameFormatIpEcn | read-only | current | ECN value for L3 IP frames. |
| 1.3.6.1.4.1.868.2.5.108.2.12.1.19 | ColumntnSACommonTestResultsFrameFormatIpFlags | read-only | current | Flags value for L3 IP frames. |
| 1.3.6.1.4.1.868.2.5.108.2.12.1.20 | ColumntnSACommonTestResultsFrameFormatIpTtl | read-only | current | TTL value for L3 IP frames. |
| 1.3.6.1.4.1.868.2.5.108.2.12.1.21 | ColumntnSACommonTestResultsFrameFormatUdpSrcPort | read-only | current | Source port for L3 IP/UDP frames. |
| 1.3.6.1.4.1.868.2.5.108.2.12.1.22 | ColumntnSACommonTestResultsFrameFormatUdpDstPort | read-only | current | Destination port for L3 IP/UDP frames. |
| 1.3.6.1.4.1.868.2.5.108.2.12.1.23 | ColumntnSACommonTestResultsFrameFormatTcpSrcPort | read-only | current | Source port for L3 IP/TCP frames. |
| 1.3.6.1.4.1.868.2.5.108.2.12.1.24 | ColumntnSACommonTestResultsFrameFormatTcpDstPort | read-only | current | Destination port for L3 IP/TCP frames. |
| 1.3.6.1.4.1.868.2.5.108.2.12.1.25 | ColumntnSACommonTestResultsFrameFormatTcpSeqNum | read-only | current | Sequence number for L3 IP/TCP frames. |
| 1.3.6.1.4.1.868.2.5.108.2.12.1.26 | ColumntnSACommonTestResultsFrameFormatTcpAckNum | read-only | current | ACK number for L3 IP/TCP frames. |
| 1.3.6.1.4.1.868.2.5.108.2.12.1.27 | ColumntnSACommonTestResultsFrameFormatTcpControlBits | read-only | current | Control bits for L3 IP/TCP frames. |
| 1.3.6.1.4.1.868.2.5.108.2.12.1.28 | ColumntnSACommonTestResultsFrameFormatTcpWindowSize | read-only | current | Window size for L3 IP/TCP frames. |
| 1.3.6.1.4.1.868.2.5.108.2.12.1.29 | ColumntnSACommonTestResultsFrameFormatLlcSnapOui | read-only | current | LLC/SNAP OUI field � 3 bytes |
| 1.3.6.1.4.1.868.2.5.108.2.12.1.30 | ColumntnSACommonTestResultsFrameFormatLlcSnapProto | read-only | current | LLC/SNAP protocol field |
| 1.3.6.1.4.1.868.2.5.108.2.12.1.31 | ColumntnSACommonTestResultsFrameFormatIpDestIpAddress | read-only | current | Destination IP address |
| 1.3.6.1.4.1.868.2.5.108.2.12.1.32 | ColumntnSACommonTestResultsThroughputTestElapsedTime | read-only | current | Total elapsed time for Throughput test in seconds. |
| 1.3.6.1.4.1.868.2.5.108.2.12.1.33 | ColumntnSACommonTestResultsLatencyTestElapsedTime | read-only | current | Total elapsed time for Latency test in seconds. |
| 1.3.6.1.4.1.868.2.5.108.2.12.1.34 | ColumntnSACommonTestResultsFlrTestElapsedTime | read-only | current | Total elapsed time for FLR test in seconds. |
| 1.3.6.1.4.1.868.2.5.108.2.12.1.35 | ColumntnSACommonTestResultsBacktoBackTestElapsedTime | read-only | current | Total elapsed time for Back to Back test in seconds. |
| 1.3.6.1.4.1.868.2.5.108.2.12.1.36 | ColumntnSACommonTestResultsThroughputTestResult | read-only | current | Throughput test result. |
| 1.3.6.1.4.1.868.2.5.108.2.12.1.37 | ColumntnSACommonTestResultsLatencyTestResult | read-only | current | Latency test result. |
| 1.3.6.1.4.1.868.2.5.108.2.12.1.38 | ColumntnSACommonTestResultsFlrTestResult | read-only | current | FLR test result. |
| 1.3.6.1.4.1.868.2.5.108.2.12.1.39 | ColumntnSACommonTestResultsBacktoBackTestResult | read-only | current | Back to back test result. |
| 1.3.6.1.4.1.868.2.5.108.2.12.1.40 | ColumntnSACommonTestResultsLastError | read-only | current | The last error string. |
| 1.3.6.1.4.1.868.2.5.108.2.12.1.41 | ColumntnSACommonTestResultsTestIngressEncapsulationType | read-only | current | VLAN tag encapsulation type. |
| 1.3.6.1.4.1.868.2.5.108.2.12.1.42 | ColumntnSACommonTestResultsTestIngressInnerVid | read-only | current | Ingress Inner VLAN ID. |
| 1.3.6.1.4.1.868.2.5.108.2.12.1.43 | ColumntnSACommonTestResultsTestIngressInnerPcp | read-only | current | Ingress Inner PCP value. |
| 1.3.6.1.4.1.868.2.5.108.2.12.1.44 | ColumntnSACommonTestResultsTestIngressOuterVid | read-only | current | Ingress Outer VLAN ID. |
| 1.3.6.1.4.1.868.2.5.108.2.12.1.45 | ColumntnSACommonTestResultsTestIngressOuterPcp | read-only | current | Ingress Outer PCP value. |
| 1.3.6.1.4.1.868.2.5.108.2.12.1.46 | ColumntnSACommonTestResultsTestEgressEncapsulationType | read-only | current | VLAN tag encapsulation type. |
| 1.3.6.1.4.1.868.2.5.108.2.12.1.47 | ColumntnSACommonTestResultsTestEgressInnerVid | read-only | current | Egress Inner VLAN ID. |
| 1.3.6.1.4.1.868.2.5.108.2.12.1.48 | ColumntnSACommonTestResultsTestEgressInnerPcp | read-only | current | Egress Inner PCP value. |
| 1.3.6.1.4.1.868.2.5.108.2.12.1.49 | ColumntnSACommonTestResultsTestEgressOuterVid | read-only | current | Egress Outer VLAN ID. |
| 1.3.6.1.4.1.868.2.5.108.2.12.1.50 | ColumntnSACommonTestResultsTestEgressOuterPcp | read-only | current | Egress Outer PCP value. |
| 1.3.6.1.4.1.868.2.5.108.2.12.1.51 | ColumntnSACommonTestResultsTestIngressPort | read-only | current | Ingress port number. |
| 1.3.6.1.4.1.868.2.5.108.2.12.1.52 | ColumntnSACommonTestResultsTestCollectorIngressPort | read-only | current | Collector's ingress port number. |
| 1.3.6.1.4.1.868.2.5.108.2.12.1.53 | ColumntnSACommonTestResultsTestCir | read-only | current | CIR. In Kbps. |
| 1.3.6.1.4.1.868.2.5.108.2.12.1.54 | ColumntnSACommonTestResultsTestCbs | read-only | current | CBS. In bytes. |
| 1.3.6.1.4.1.868.2.5.108.2.12.1.55 | ColumntnSACommonTestResultsTestEir | read-only | current | EIR. In Kbps. |
| 1.3.6.1.4.1.868.2.5.108.2.12.1.56 | ColumntnSACommonTestResultsTestEbs | read-only | current | EBS. In bytes. |
| 1.3.6.1.4.1.868.2.5.108.2.13 | TabletnSACommonTestResultsDmBinThresholdTable | not-accessible | current | Table of DM bin thresholds used for this test. |
| 1.3.6.1.4.1.868.2.5.108.2.13.1 | RowtnSACommonTestResultsDmBinThresholdEntry | not-accessible | current | An entry in the SA tnSACommonTestResultsDmBinThresholdTable. |
| 1.3.6.1.4.1.868.2.5.108.2.13.1.1 | ColumntnSACommonTestResultsDmBinThresholdIndex | not-accessible | current | DM bin threshold index. |
| 1.3.6.1.4.1.868.2.5.108.2.13.1.2 | ColumntnSACommonTestResultsDmBinThresholdValue | read-only | current | DM bin threshold value in usec. |
| 1.3.6.1.4.1.868.2.5.108.2.14 | TabletnSACommonTestResultsDmvBinThresholdTable | not-accessible | current | Table of DMV bin thresholds used fot this test. |
| 1.3.6.1.4.1.868.2.5.108.2.14.1 | RowtnSACommonTestResultsDmvBinThresholdEntry | not-accessible | current | An entry in the SA tnSACommonTestResultsDmvBinThresholdTable. |
| 1.3.6.1.4.1.868.2.5.108.2.14.1.1 | ColumntnSACommonTestResultsDmvBinThresholdIndex | not-accessible | current | DM bin threshold index. |
| 1.3.6.1.4.1.868.2.5.108.2.14.1.2 | ColumntnSACommonTestResultsDmvBinThresholdValue | read-only | current | DM bin threshold value in usec. Zero value is used to delete threshold. |
| 1.3.6.1.4.1.868.2.5.108.2.15 | TabletnSAThroughputTestResultsTable | not-accessible | current | Table for Throughput Test Results. |
| 1.3.6.1.4.1.868.2.5.108.2.15.1 | RowtnSAThroughputTestResultsEntry | not-accessible | current | An entry in the tnSAThroughputTestResultsTable. |
| 1.3.6.1.4.1.868.2.5.108.2.15.1.1 | ColumntnSAThroughputTestResultsTestId | not-accessible | current | The report Test ID. |
| 1.3.6.1.4.1.868.2.5.108.2.15.1.2 | ColumntnSAThroughputTestResultsStepNumber | not-accessible | current | Test step number. |
| 1.3.6.1.4.1.868.2.5.108.2.15.1.3 | ColumntnSAThroughputTestResultsDirection | read-only | current | The report direction. |
| 1.3.6.1.4.1.868.2.5.108.2.15.1.4 | ColumntnSAThroughputTestResultsActualRate | read-only | current | Actual rate in Kbps. |
| 1.3.6.1.4.1.868.2.5.108.2.15.1.5 | ColumntnSAThroughputTestResultsStepDuration | read-only | current | Step duration in seconds. |
| 1.3.6.1.4.1.868.2.5.108.2.15.1.6 | ColumntnSAThroughputTestResultsTxFrames | read-only | current | Transmitted frames. |
| 1.3.6.1.4.1.868.2.5.108.2.15.1.7 | ColumntnSAThroughputTestResultsRxGreenFrames | read-only | current | Received green frames. |
| 1.3.6.1.4.1.868.2.5.108.2.15.1.8 | ColumntnSAThroughputTestResultsRxYellowFrames | read-only | current | Received yellow frames. |
| 1.3.6.1.4.1.868.2.5.108.2.15.1.9 | ColumntnSAThroughputTestResultsStepResult | read-only | current | Step result. |
| 1.3.6.1.4.1.868.2.5.108.2.15.1.10 | ColumntnSAThroughputTestResultsFrameSize | read-only | current | Frame size. |
| 1.3.6.1.4.1.868.2.5.108.2.16 | TabletnSALatencyTestResultsTable | not-accessible | current | Table for Latency Test Results. |
| 1.3.6.1.4.1.868.2.5.108.2.16.1 | RowtnSALatencyTestResultsEntry | not-accessible | current | An entry in the tnSALatencyTestResultsTable. |
| 1.3.6.1.4.1.868.2.5.108.2.16.1.1 | ColumntnSALatencyTestResultsTestId | not-accessible | current | The report Test ID. |
| 1.3.6.1.4.1.868.2.5.108.2.16.1.2 | ColumntnSALatencyTestResultsStepNumber | not-accessible | current | Test step number. |
| 1.3.6.1.4.1.868.2.5.108.2.16.1.3 | ColumntnSALatencyTestResultsDirection | read-only | current | The report direction. |
| 1.3.6.1.4.1.868.2.5.108.2.16.1.4 | ColumntnSALatencyTestResultsStepDuration | read-only | current | Step duration in seconds. |
| 1.3.6.1.4.1.868.2.5.108.2.16.1.5 | ColumntnSALatencyTestResultsFrameSize | read-only | current | Frame size. |
| 1.3.6.1.4.1.868.2.5.108.2.16.1.6 | ColumntnSALatencyTestResultsStepResult | read-only | current | Step result. |
| 1.3.6.1.4.1.868.2.5.108.2.16.1.7 | ColumntnSALatencyTestResultsDmMin | read-only | current | Minimal delay in us. |
| 1.3.6.1.4.1.868.2.5.108.2.16.1.8 | ColumntnSALatencyTestResultsDmMax | read-only | current | Maximal delay in us. |
| 1.3.6.1.4.1.868.2.5.108.2.16.1.9 | ColumntnSALatencyTestResultsDmAvg | read-only | current | Average delay in us. |
| 1.3.6.1.4.1.868.2.5.108.2.16.1.10 | ColumntnSALatencyTestResultsDmvMin | read-only | current | Minimal delay variation in us. |
| 1.3.6.1.4.1.868.2.5.108.2.16.1.11 | ColumntnSALatencyTestResultsDmvMax | read-only | current | Maximal delay variation in us. |
| 1.3.6.1.4.1.868.2.5.108.2.16.1.12 | ColumntnSALatencyTestResultsDmvAvg | read-only | current | Average delay variation in us. |
| 1.3.6.1.4.1.868.2.5.108.2.17 | TabletnSALatencyTestResultsDmBinThresholdTable | not-accessible | current | Table for Latency test DM bin counters. |
| 1.3.6.1.4.1.868.2.5.108.2.17.1 | RowtnSALatencyTestResultsDmBinThresholdEntry | not-accessible | current | An entry in the SA tnSALatencyTestResultsDmBinThresholdTable. |
| 1.3.6.1.4.1.868.2.5.108.2.17.1.1 | ColumntnSALatencyTestResultsDmBinThresholdIndex | not-accessible | current | DM bin threshold index. |
| 1.3.6.1.4.1.868.2.5.108.2.17.1.2 | ColumntnSALatencyTestResultsDmBinThresholdRange | read-only | current | DM bin threshold range. |
| 1.3.6.1.4.1.868.2.5.108.2.17.1.3 | ColumntnSALatencyTestResultsDmBinThresholdValue | read-only | current | DM bin counter. |
| 1.3.6.1.4.1.868.2.5.108.2.18 | TabletnSALatencyTestResultsDmvBinThresholdTable | not-accessible | current | Table for Latency test DMV bin counters. |
| 1.3.6.1.4.1.868.2.5.108.2.18.1 | RowtnSALatencyTestResultsDmvBinThresholdEntry | not-accessible | current | An entry in the SA tnSALatencyTestResultsDmvBinThresholdTable. |
| 1.3.6.1.4.1.868.2.5.108.2.18.1.1 | ColumntnSALatencyTestResultsDmvBinThresholdIndex | not-accessible | current | DM bin threshold index. |
| 1.3.6.1.4.1.868.2.5.108.2.18.1.2 | ColumntnSALatencyTestResultsDmvBinThresholdRange | read-only | current | DMV bin threshold range. |
| 1.3.6.1.4.1.868.2.5.108.2.18.1.3 | ColumntnSALatencyTestResultsDmvBinThresholdValue | read-only | current | DMV bin counter. |
| 1.3.6.1.4.1.868.2.5.108.2.19 | TabletnSAFlrTestResultsTable | not-accessible | current | Table for FLR Test Results. |
| 1.3.6.1.4.1.868.2.5.108.2.19.1 | RowtnSAFlrTestResultsEntry | not-accessible | current | An entry in the tnSAFlrTestResultsTable. |
| 1.3.6.1.4.1.868.2.5.108.2.19.1.1 | ColumntnSAFlrTestResultsTestId | not-accessible | current | The report Test ID. |
| 1.3.6.1.4.1.868.2.5.108.2.19.1.2 | ColumntnSAFlrTestResultsStepNumber | not-accessible | current | Test step number. |
| 1.3.6.1.4.1.868.2.5.108.2.19.1.3 | ColumntnSAFlrTestResultsDirection | read-only | current | The report direction. |
| 1.3.6.1.4.1.868.2.5.108.2.19.1.4 | ColumntnSAFlrTestResultsActualRate | read-only | current | Actual rate in Kbps. |
| 1.3.6.1.4.1.868.2.5.108.2.19.1.5 | ColumntnSAFlrTestResultsStepDuration | read-only | current | Step duration in seconds. |
| 1.3.6.1.4.1.868.2.5.108.2.19.1.6 | ColumntnSAFlrTestResultsTxFrames | read-only | current | Transmitted frames. |
| 1.3.6.1.4.1.868.2.5.108.2.19.1.7 | ColumntnSAFlrTestResultsRxGreenFrames | read-only | current | Received green frames. |
| 1.3.6.1.4.1.868.2.5.108.2.19.1.8 | ColumntnSAFlrTestResultsRxYellowFrames | read-only | current | Received yellow frames. |
| 1.3.6.1.4.1.868.2.5.108.2.19.1.9 | ColumntnSAFlrTestResultsFlr | read-only | current | Calculated frame loss ratio. |
| 1.3.6.1.4.1.868.2.5.108.2.19.1.10 | ColumntnSAFlrTestResultsStepResult | read-only | current | Step result. |
| 1.3.6.1.4.1.868.2.5.108.2.19.1.11 | ColumntnSAFlrTestResultsFrameSize | read-only | current | Frame size. |
| 1.3.6.1.4.1.868.2.5.108.2.19.1.12 | ColumntnSAFlrTestResultsOutOfSeqEvents | read-only | current | Out of sequence events. |
| 1.3.6.1.4.1.868.2.5.108.2.20 | TabletnSABackToBackTestResultsTable | not-accessible | current | Table for Back to Back Test Results. |
| 1.3.6.1.4.1.868.2.5.108.2.20.1 | RowtnSABackToBackTestResultsEntry | not-accessible | current | An entry in the tnSABackToBackTestResultsTable. |
| 1.3.6.1.4.1.868.2.5.108.2.20.1.1 | ColumntnSABackToBackTestResultsTestId | not-accessible | current | The report Test ID. |
| 1.3.6.1.4.1.868.2.5.108.2.20.1.2 | ColumntnSABackToBackTestResultsStepNumber | not-accessible | current | Test step number. |
| 1.3.6.1.4.1.868.2.5.108.2.20.1.3 | ColumntnSABackToBackTestResultsDirection | read-only | current | The report direction. |
| 1.3.6.1.4.1.868.2.5.108.2.20.1.4 | ColumntnSABackToBackTestResultsActualRate | read-only | current | Actual rate in Kbps. |
| 1.3.6.1.4.1.868.2.5.108.2.20.1.5 | ColumntnSABackToBackTestResultsStepDuration | read-only | current | Step duration in seconds. |
| 1.3.6.1.4.1.868.2.5.108.2.20.1.6 | ColumntnSABackToBackTestResultsTxFrames | read-only | current | Transmitted frames. |
| 1.3.6.1.4.1.868.2.5.108.2.20.1.7 | ColumntnSABackToBackTestResultsRxGreenFrames | read-only | current | Received green frames. |
| 1.3.6.1.4.1.868.2.5.108.2.20.1.8 | ColumntnSABackToBackTestResultsRxYellowFrames | read-only | current | Received yellow frames. |
| 1.3.6.1.4.1.868.2.5.108.2.20.1.9 | ColumntnSABackToBackTestResultsFlr | read-only | current | Calculated frame loss ratio. |
| 1.3.6.1.4.1.868.2.5.108.2.20.1.10 | ColumntnSABackToBackTestResultsStepResult | read-only | current | Step result. |
| 1.3.6.1.4.1.868.2.5.108.2.20.1.11 | ColumntnSABackToBackTestResultsBurstSize | read-only | current | Burts size. |
| 1.3.6.1.4.1.868.2.5.108.2.21 | TabletnSAsaveRptTable | not-accessible | current | Table for saving results report to a file. |
| 1.3.6.1.4.1.868.2.5.108.2.21.1 | RowtnSAsaveRptEntry | not-accessible | current | An entry in the tnSAsaveRptTable. |
| 1.3.6.1.4.1.868.2.5.108.2.21.1.1 | ColumntnSAsaveRptNumber | read-write | current | The report Test ID. |
| 1.3.6.1.4.1.868.2.5.108.2.21.1.2 | ColumntnSAsaveRptHostType | read-write | current | The IP address type of the device. For a detailed description of this type, please refer to INET-ADDRESS-MIB. |
| 1.3.6.1.4.1.868.2.5.108.2.21.1.3 | ColumntnSAsaveRptHostName | read-write | current | The IP address of the device. For a detailed description of this type, please refer to INET-ADDRESS-MIB. |
| 1.3.6.1.4.1.868.2.5.108.2.21.1.4 | ColumntnSAsaveRptFileName | read-write | current | Name of text file to save the test results. |
| 1.3.6.1.4.1.868.2.5.108.2.21.1.5 | ColumntnSAsaveRpt | read-write | current | Save the test results in a text file. The text file is saved asynchronously after which the value of tnSAsaveRpt is returned to doNothing(0). The file is saved… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| TnSADirectionality | INTEGER { unidirection (0), bidirection (1), loopback (2) } | current | Directionality of the test. |
| TnSAEnabledState | INTEGER { disabled (0), enabled (1) } | current | Enabled state. |
| TnSAFrameLevel | INTEGER { levelL2 (1), levelL3 (2) } | current | Frame level. |
| TnSAL2Encaps | INTEGER { none (0), eth-tst (1), eth-tst-ethtype (2), llc-snap (3) } | current | Encapsulation type for L2 frames. |
| TnSAL3Encaps | INTEGER { none (0), udp (1), tcp (2) } | current | Encapsulation type for L3 frames. |
| TnSAPaylodFiller | INTEGER { prbs (0), fixed (2) } | current | Payload filler. |
| TnSATestAction | INTEGER { start (1), stop (2) } | current | Test action. |
| TnSATestDirection | INTEGER { ne-to-fe (0), fe-to-ne (1), loopback (2) } | current | Test Direction. |
| TnSATestEncapsulationType | INTEGER { utag (0), ctag (1), stag (2), cctag (3), sctag (4) } | current | VLAN Tag encapsulation type. |
| TnSATestResStatus | INTEGER { fail-ne (1), fail-fe (2), fail-ne-fe (3), pass (4), not-tested (5), fail-exec (6) } | current | Test result. fail NE � if near end to far end direction has failed. fail FE � if far end to near end direction has failed (For bidirectional mode only). fail NE & FE � if both directions have failed (For bidirecti… |
| TnSATestStatus | INTEGER { status-none (1), completed (2), in-progress (3), not-supported (4), unable-to-run (5), aborted (6), failed (7), unknown (8) } | current | Overall test status. |
| TnSATestStepResult | INTEGER { fail (0), pass (1) } | current | Test step result. |