TNPP-OPT-MIB
89 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter enterprises |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.449 | Nodecodex | |||
| 1.3.6.1.4.1.449.2 | NodecdxProductSpecific | |||
| 1.3.6.1.4.1.449.2.1 | Nodecdx6500 | |||
| 1.3.6.1.4.1.449.2.1.2 | Nodecdx6500Configuration | |||
| 1.3.6.1.4.1.449.2.1.2.1 | Nodecdx6500CfgProtocolGroup | |||
| 1.3.6.1.4.1.449.2.1.2.1.1 | Nodecdx6500PCTPortProtocolGroup | |||
| 1.3.6.1.4.1.449.2.1.2.1.1.32 | Tablecdx6500PPCTTNPPPortTable | not-accessible | mandatory | This table contains the TNPP port configuration parameters. |
| 1.3.6.1.4.1.449.2.1.2.1.1.32.1 | Rowcdx6500PPCTTNPPPortEntry | not-accessible | mandatory | Entries in the TNPP port configuration table. |
| 1.3.6.1.4.1.449.2.1.2.1.1.32.1.1 | ColumntnppPCfgPortNumber | read-only | mandatory | Port Number of the TNPP port. |
| 1.3.6.1.4.1.449.2.1.2.1.1.32.1.2 | ColumntnppPCfgPortType | read-only | mandatory | Specifies the type of access protocol for this port. |
| 1.3.6.1.4.1.449.2.1.2.1.1.32.1.3 | ColumntnppPCfgPortSpeed | read-only | mandatory | Specifies port speed in bits per second. speed300 : 300 bits per second. speed1200 : 1200 bits per second. speed2400 : 2400 bits per second. speed4800 : 4800 b… |
| 1.3.6.1.4.1.449.2.1.2.1.1.32.1.4 | ColumntnppPCfgCallControl | read-only | mandatory | Specifies the mode for X.25 call generation. dtr - X.25 call is generated when DTR is up. Connection type between TNPP PAD and Paging Terminal is DTR. dataDrv … |
| 1.3.6.1.4.1.449.2.1.2.1.1.32.1.5 | ColumntnppPCfgCRCOption | read-only | mandatory | Specifies the CRC option. normal - 2 bytes binary CRC. transp - 4 bytes ASCII CRC. nc - Skipped during configuration. |
| 1.3.6.1.4.1.449.2.1.2.1.1.32.1.6 | ColumntnppPCfgTANControl | read-only | mandatory | Specifies whether to accept control characters(ACK/NAK) in the frame. mps2000Mode - Do not accept embedded control characters in the frame. unipageMode - Accep… |
| 1.3.6.1.4.1.449.2.1.2.1.1.32.1.7 | ColumntnppPCfgCANReports | read-only | mandatory | Specifies whether to log reports generated by TNPP PAD. no - Reports generated due to CANcel frame will not be logged. yes - Reports generated due to CANcel fr… |
| 1.3.6.1.4.1.449.2.1.2.1.1.32.1.8 | ColumntnppPCfgRSCount | read-only | mandatory | TNPP PAD port will flow control the X.25 channel when the number of RSed frames on hold remains at or above the configured value of this parameter. Specifies t… |
| 1.3.6.1.4.1.449.2.1.2.1.1.32.1.9 | ColumntnppPCfgMaxRSCount | read-only | mandatory | TNPP PAD port will stop transmission of any new frame to the paging terminal if the number of frames on hold remains above the value of this parameter. Transmi… |
| 1.3.6.1.4.1.449.2.1.2.1.1.32.1.10 | ColumntnppPCfgRSSupport | read-only | mandatory | Specifies whether to respond with RS to local paging terminal in case of X25 link being blocked. no - RS is not transmitted. yes - RS is transmitted. nc - Skip… |
| 1.3.6.1.4.1.449.2.1.2.1.1.32.1.11 | ColumntnppPCfgAutocallMnemonic | read-only | mandatory | This parameter refers to the remote address which will be called by the TNPP PAD port. Specifies the Mnemonic Address for Autocall. |
| 1.3.6.1.4.1.449.2.1.2.1.1.32.1.12 | ColumntnppPCfgAutocallTimeout | read-only | mandatory | This parameter is the time interval in seconds between call attempts when auto calling. Specifies the time value for retrying AUTOCALL in seconds. |
| 1.3.6.1.4.1.449.2.1.2.1.1.32.1.13 | ColumntnppPCfgMaxAutocallAttempt | read-only | mandatory | Specifies the number of Autocall attempts. 0 - No Autocall retry limit. |
| 1.3.6.1.4.1.449.2.1.2.1.1.32.1.14 | ColumntnppPCfgProtectionLevel | read-only | mandatory | This specifies the level of data or connection protection which will be applied to calls to or from this port. The actual level for a call will be negotiated t… |
| 1.3.6.1.4.1.449.2.1.2.1.1.32.1.15 | ColumntnppPCfgReconnTimeout | read-only | mandatory | This specifies the number of seconds that DCP on the originating side will wait between reconnection attempts. |
| 1.3.6.1.4.1.449.2.1.2.1.1.32.1.16 | ColumntnppPCfgMaxReconnAttempt | read-only | mandatory | This specifies the number of times that DCP on the orginating side will attempt to reconnect before clearing the call. If the value is zero no attempt to recon… |
| 1.3.6.1.4.1.449.2.1.2.1.1.32.1.17 | ColumntnppPCfgElectricalInterfaceType | read-only | mandatory | Specify the Electrical Interface Type: V.24 - V.24 Electrical Interface Type V.35 - V.35 Electrical Interface Type V.36 - V.36 Electrical Interface Type X.21 -… |
| 1.3.6.1.4.1.449.2.1.2.1.1.32.1.18 | ColumntnppPCfgV24ElectricalInterfaceOption | read-only | mandatory | Specify the Pin 22 option: RI - V.24 uses Pin 22 for Ring Indicator output signal TM - V.24 uses Pin 22 for Test Mode input signal |
| 1.3.6.1.4.1.449.2.1.2.1.1.32.1.19 | ColumntnppPCfgHighSpeedElectricalInterfaceOption | read-only | mandatory | Specify the cable type: NONE - V.35/V.36/X.21 DCE with straight through cable XOVER - V.35/V.36/X.21 DCE with crossover adapter cable |
| 1.3.6.1.4.1.449.2.1.3 | Nodecdx6500Statistics | |||
| 1.3.6.1.4.1.449.2.1.3.1 | Nodecdx6500StatProtocolGroup | |||
| 1.3.6.1.4.1.449.2.1.3.1.1 | Nodecdx6500PSTPortProtocolGroup | |||
| 1.3.6.1.4.1.449.2.1.3.1.1.33 | Nodecdx6500PPSTTNPPPStatTable | |||
| 1.3.6.1.4.1.449.2.1.3.1.1.33.1 | TabletnppPGenStatTable | not-accessible | mandatory | This table contains the port statistics general parameters. |
| 1.3.6.1.4.1.449.2.1.3.1.1.33.1.1 | RowtnppPGenStatEntry | not-accessible | mandatory | Entries in the TNPP port statistics general parameters table. |
| 1.3.6.1.4.1.449.2.1.3.1.1.33.1.1.1 | ColumntnppPGStatPortNumber | read-only | mandatory | Port Number of the TNPP port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.33.1.1.2 | ColumntnppPGStatPortType | read-only | mandatory | This indicates the type of access protocol for this port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.33.1.1.3 | ColumntnppPGStatPortStatus | read-only | mandatory | This indicates the operational status of the port. disabled : port is disabled. up : port is up. na : Value not available. |
| 1.3.6.1.4.1.449.2.1.3.1.1.33.1.1.4 | ColumntnppPGStatPortSpeed | read-only | mandatory | This indicates the port speed in bits per second. |
| 1.3.6.1.4.1.449.2.1.3.1.1.33.1.1.5 | ColumntnppPGStatPortUtilIn | read-only | mandatory | This indicates the port utilization for the line to port direction. |
| 1.3.6.1.4.1.449.2.1.3.1.1.33.1.1.6 | ColumntnppPGStatPortUtilOut | read-only | mandatory | This indicates the port utilization for the port to line direction. |
| 1.3.6.1.4.1.449.2.1.3.1.1.33.1.1.7 | ColumntnppPGStatParityErrors | read-only | mandatory | This indicates the number of parity errors counted by the I/O driver. |
| 1.3.6.1.4.1.449.2.1.3.1.1.33.1.1.8 | ColumntnppPGStatOverrunErrors | read-only | mandatory | This indicates number of overrun errors detected by the I/O driver. |
| 1.3.6.1.4.1.449.2.1.3.1.1.33.1.1.9 | ColumntnppPGStatFramingErrors | read-only | mandatory | This indicates number of framing errors detected by the I/O driver. |
| 1.3.6.1.4.1.449.2.1.3.1.1.33.1.1.10 | ColumntnppPGStatLocalDTEState | read-only | mandatory | This indicates the local DTE state. active - DTE is active. down - DTE is down. na - Value not available. |
| 1.3.6.1.4.1.449.2.1.3.1.1.33.1.1.11 | ColumntnppPGStatRemoteDTEState | read-only | mandatory | This indicates the remote DTE state. active - DTE is active. down - DTE is down. na - Value not available. |
| 1.3.6.1.4.1.449.2.1.3.1.1.33.1.1.12 | ColumntnppPGStatRemotePadQ | read-only | mandatory | This indicates the size of the remote TNPP PAD queue. |
| 1.3.6.1.4.1.449.2.1.3.1.1.33.1.1.13 | ColumntnppPGStatLocalTerminalQ | read-only | mandatory | This indicates the size of the Local Terminal queue. |
| 1.3.6.1.4.1.449.2.1.3.1.1.33.1.1.14 | ColumntnppPGStatReadyQ | read-only | mandatory | This indicates the size of the Ready Queue. |
| 1.3.6.1.4.1.449.2.1.3.1.1.33.1.1.15 | ColumntnppPGStatHoldQ | read-only | mandatory | This indicates the size of the Hold Queue. |
| 1.3.6.1.4.1.449.2.1.3.1.1.33.2 | TabletnppPDataSummaryStatTable | not-accessible | mandatory | This table contains the TNPP port statistics data summary parameters. |
| 1.3.6.1.4.1.449.2.1.3.1.1.33.2.1 | RowtnppPDataSummaryStatEntry | not-accessible | mandatory | Entries in the TNPP port statistics data summary table. |
| 1.3.6.1.4.1.449.2.1.3.1.1.33.2.1.1 | ColumntnppPDSStatPortNumber | read-only | mandatory | Port Number of the TNPP port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.33.2.1.2 | ColumntnppPDSStatTotalCharIn | read-only | mandatory | This indicates the total number of characters that have been received by the port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.33.2.1.3 | ColumntnppPDSStatTotalCharOut | read-only | mandatory | This indicates the total number of characters that have been transmitted by the port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.33.2.1.4 | ColumntnppPDSStatTotalFramesIn | read-only | mandatory | This indicates the total number of frames that have been received by the port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.33.2.1.5 | ColumntnppPDSStatTotalFramesOut | read-only | mandatory | This indicates the total number of frames that have been transmitted by the port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.33.2.1.6 | ColumntnppPDSStatCharInPerSec | read-only | mandatory | This indicates the rate at which characters have been received by the port per second. |
| 1.3.6.1.4.1.449.2.1.3.1.1.33.2.1.7 | ColumntnppPDSStatCharOutPerSec | read-only | mandatory | This indicates the rate at which characters have been transmitted by the port per second. |
| 1.3.6.1.4.1.449.2.1.3.1.1.33.2.1.8 | ColumntnppPDSStatFramesInPerSec | read-only | mandatory | This indicates the rate at which frames have been received by the port per second. |
| 1.3.6.1.4.1.449.2.1.3.1.1.33.2.1.9 | ColumntnppPDSStatFramesOutPerSec | read-only | mandatory | This indicates the rate at which frames have been transmitted by the port per second. |
| 1.3.6.1.4.1.449.2.1.3.1.1.33.3 | TabletnppPFrameSummaryStatTable | not-accessible | mandatory | This table contains the TNPP port statistics frame summary parameters. |
| 1.3.6.1.4.1.449.2.1.3.1.1.33.3.1 | RowtnppPFrameSummaryStatEntry | not-accessible | mandatory | Entries in the TNPP port statistics frame summary table. |
| 1.3.6.1.4.1.449.2.1.3.1.1.33.3.1.1 | ColumntnppPFSStatPortNumber | read-only | mandatory | Port number of the TNPP port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.33.3.1.2 | ColumntnppPFSStatLinkState | read-only | mandatory | This indicates the current link state. init - Initialization state. awaitEnqResp - Await enquiry response state. ready - Ready to communicate state. transmitti… |
| 1.3.6.1.4.1.449.2.1.3.1.1.33.3.1.3 | ColumntnppPFSStatCRCErrors | read-only | mandatory | This indicates the total number of TNPP frames received with Cyclic Redundancy Check errors . |
| 1.3.6.1.4.1.449.2.1.3.1.1.33.3.1.4 | ColumntnppPFSStatLinkFramingErrors | read-only | mandatory | This indicates the total number of TNPP framing errors occured (Invalid Header, Invalid Control character, Frame Size Exceeded, Incomplete Frame, etc.,) . |
| 1.3.6.1.4.1.449.2.1.3.1.1.33.3.1.5 | ColumntnppPFSStatProtocolErrors | read-only | mandatory | This indicates the number of protocol errors due to unexpected events. |
| 1.3.6.1.4.1.449.2.1.3.1.1.33.3.1.6 | ColumntnppPFSStatACKFramesIn | read-only | mandatory | This indicates the total number of Acknowledgment frames received by the port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.33.3.1.7 | ColumntnppPFSStatACKFramesOut | read-only | mandatory | This indicates the total number of Acknowledgment frames transmitted by the port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.33.3.1.8 | ColumntnppPFSStatNAKFramesIn | read-only | mandatory | This indicates the total number of Negative Acknowledgment frames received by the port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.33.3.1.9 | ColumntnppPFSStatNAKFramesOut | read-only | mandatory | This indicates the total number of Negative Acknowledgment frames transmitted by the port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.33.3.1.10 | ColumntnppPFSStatRSFramesIn | read-only | mandatory | This indicates the total number of Request to Stop frames received by the port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.33.3.1.11 | ColumntnppPFSStatRSFramesOut | read-only | mandatory | This indicates the total number of Request to Stop frames transmitted by the port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.33.3.1.12 | ColumntnppPFSStatCANFramesIn | read-only | mandatory | This indicates the total number of CANcel report frames received by the port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.33.3.1.13 | ColumntnppPFSStatCANFramesOut | read-only | mandatory | This indicates the total number of CANcel report frames transmitted by the port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.33.3.1.14 | ColumntnppPFSStatEOTFramesIn | read-only | mandatory | This indicates the total number of End of Transmission frames received by the port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.33.3.1.15 | ColumntnppPFSStatEOTFramesOut | read-only | mandatory | This indicates the total number of End of Transmission frames transmitted by the port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.33.3.1.16 | ColumntnppPFSStatENQFramesIn | read-only | mandatory | This indicates the total number of Enquiry frames received by the port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.33.3.1.17 | ColumntnppPFSStatENQFramesOut | read-only | mandatory | This indicates the total number of Enquiry frames transmitted by the port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.33.3.1.18 | ColumntnppPFSStatDataFramesInPassed | read-only | mandatory | This indicates the total number of valid data frames received by the port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.33.3.1.19 | ColumntnppPFSStatDataFramesOutPassed | read-only | mandatory | This indicates the total number of valid data frames transmitted by the port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.33.3.1.20 | ColumntnppPFSStatDataFramesInDiscarded | read-only | mandatory | This indicates the total number of data frames received by the port and discarded. |
| 1.3.6.1.4.1.449.2.1.3.1.1.33.3.1.21 | ColumntnppPFSStatDataFramesOutDiscarded | read-only | mandatory | This indicates the total number of data frames transmitted by the port and discarded. |
| 1.3.6.1.4.1.449.2.1.4 | Nodecdx6500Controls | |||
| 1.3.6.1.4.1.449.2.1.4.15 | Nodecdx6500ContTNPPTable | |||
| 1.3.6.1.4.1.449.2.1.4.15.1 | Tablecdx6500ContTNPPPortTable | not-accessible | mandatory | This table contains the TNPP Port Control parameters. |
| 1.3.6.1.4.1.449.2.1.4.15.1.1 | Rowcdx6500ContTNPPPortEntry | not-accessible | mandatory | Entries in the TNPP Port Control Table. |
| 1.3.6.1.4.1.449.2.1.4.15.1.1.1 | ColumntnppPContPortNumber | not-accessible | mandatory | Port number of the TNPP port. |
| 1.3.6.1.4.1.449.2.1.4.15.1.1.2 | ColumntnppPContPortControl | write-only | mandatory | Control operations for the specified TNPP port. boot - Boots the TNPP Port. enable - Enables the TNPP Port. disable - Disables the TNPP Port. busyout - Busyout… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DisplayString | OCTET STRING |