TelcoReturnCABLE-DEVICE-MIB
69 objects
TELCO Return MIB for Data Over Cable Access modems and termination systems
Imported Objects
| RFC1213-MIB | transmission |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString RowStatus TruthValue |
| USR-DEFINITIONS-MIB | InterfaceIndexOrZero |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.128 | IdentitydocsTrCmMIB | TELCO Return MIB for Data Over Cable Access modems and termination systems | ||
| 1.3.6.1.2.1.10.128.1 | NodedocsTrCmMIBObjects | |||
| 1.3.6.1.2.1.10.128.1.1 | NodedocsTrCmBase | |||
| 1.3.6.1.2.1.10.128.1.1.1 | ScalardocsTrCmCapability | read-only | current | This object represents the CM Capability. A CM may be'TelcoReturn(2)', or 'TwoWay(3)', or Other e.g., undefined |
| 1.3.6.1.2.1.10.128.1.1.2 | ScalardocsTrCmMode | read-write | current | This object represents the CM Operating Mode. A CM may be operating as'TelcoReturn(2)', or 'TwoWay(3)', or Other e.g, undefined |
| 1.3.6.1.2.1.10.128.1.2 | NodedocsTrMsgBase | |||
| 1.3.6.1.2.1.10.128.1.2.1 | TabledocsTrMsgBaseTable | not-accessible | current | Telco Return Message Base Table |
| 1.3.6.1.2.1.10.128.1.2.1.1 | RowdocsTrMsgBaseEntry | not-accessible | current | This table contains the information about TCD/TSI and USRbackOff for each interface |
| 1.3.6.1.2.1.10.128.1.2.1.1.1 | ColumndocsTrMsgIfIndex | not-accessible | current | The value corresponds to ifIndex for either a CATV MAC or other network interface. In Cable Modems, the default value is the customer side interface. In Cable … |
| 1.3.6.1.2.1.10.128.1.2.1.1.2 | ColumndocsTrMsgTCDInterval | read-write | current | The interval between CMTS transmission of successive Telephony Channel Descriptor (TCD) messages at this interface. |
| 1.3.6.1.2.1.10.128.1.2.1.1.3 | ColumndocsTrMsgTSIInterval | read-write | current | The interval between CMTS transmission of successive Termination System Interface (TSI) messages for a downstream channel at this interface.This is also the ti… |
| 1.3.6.1.2.1.10.128.1.2.1.1.4 | ColumndocsTrMsgUSRBackOff | read-write | current | This object represents the number of times CMTS will resend User Station Reset messages if unacknowledged by CM; Number of duplicate reset requests CM may rece… |
| 1.3.6.1.2.1.10.128.1.2.1.1.5 | ColumndocsTrMsgRowValue | read-write | current | Controls and reflects the status of rows in this table |
| 1.3.6.1.2.1.10.128.1.3 | NodedocsTrTsSPD | |||
| 1.3.6.1.2.1.10.128.1.3.1 | TabledocsTrTsSPDTable | not-accessible | current | A table of all the SPD messages that get sent out |
| 1.3.6.1.2.1.10.128.1.3.1.1 | RowdocsTrTsSPDEntry | not-accessible | current | This an entry in the SPD table which is one of the SPD that get sent outto the cable modems |
| 1.3.6.1.2.1.10.128.1.3.1.1.1 | ColumndocsTrTsSPDindex | not-accessible | current | The unique number which identifies the Service Provider Descriptor in the SPDTable |
| 1.3.6.1.2.1.10.128.1.3.1.1.2 | ColumndocsTrTsSPDname | read-create | current | The name of the Service Provider. A value of null string means no name |
| 1.3.6.1.2.1.10.128.1.3.1.1.3 | ColumndocsTrTsSPDphoneNum1 | read-create | current | The first phone number to try when trying to reach the service provider. A value of null string means no phone number |
| 1.3.6.1.2.1.10.128.1.3.1.1.4 | ColumndocsTrTsSPDphoneNum2 | read-create | current | The second phone number to try to reach the service provider when the first number fails. A value of null string means no phone number |
| 1.3.6.1.2.1.10.128.1.3.1.1.5 | ColumndocsTrTsSPDphoneNum3 | read-create | current | The third phone number to try in case the 1st and 2nd numbers fail. A value of null string means no phone number |
| 1.3.6.1.2.1.10.128.1.3.1.1.6 | ColumndocsTrTsSPDConnThreshold | read-create | current | The number of sequential connection try failures before indicating connection failure. |
| 1.3.6.1.2.1.10.128.1.3.1.1.7 | ColumndocsTrTsSPDuserName | read-create | current | The username the CM will use during PAP or CHAP authentication over telco link during the initialization procedure. |
| 1.3.6.1.2.1.10.128.1.3.1.1.8 | ColumndocsTrTsSPDuserPassword | read-create | current | The password that the CM will use during the PAP or CHAP authentication over the telco link during the initialization procedure. |
| 1.3.6.1.2.1.10.128.1.3.1.1.9 | ColumndocsTrTsSPDpppAuth | read-create | current | This instructs the telco return modem of the authentication procedure to perform over the telco link. |
| 1.3.6.1.2.1.10.128.1.3.1.1.10 | ColumndocsTrTsSPDdhcpAuth | read-create | current | Boolean value reserved to indicate CM MUST authenticate DHCP messages when enable. |
| 1.3.6.1.2.1.10.128.1.3.1.1.11 | ColumndocsTrTsSPDradiusRealm | read-create | current | The realm name contains the ASCII string which defines a RADIUS server domain. TRAC RADIUS MUST proxy requests to a server realm. RADIUS syntax is to address l… |
| 1.3.6.1.2.1.10.128.1.3.1.1.12 | ColumndocsTrTsDemandDialTimer | read-write | current | This object represents the number of seconds of networking inactivity allowed before hang-up, the default zero indicates demand dial is not enabled. Demand dia… |
| 1.3.6.1.2.1.10.128.1.3.1.1.13 | ColumndocsTrTsSPDdhcpAddress | read-create | current | The ip address of the DHCP server. |
| 1.3.6.1.2.1.10.128.1.3.1.1.14 | ColumndocsTrTsSPDfactoryDef | read-create | current | boolean value, if true, indicates the SPD which SHOULD be used by the CM during factory default procedure. |
| 1.3.6.1.2.1.10.128.1.3.1.1.15 | ColumndocsTrTsSPDstatus | read-create | current | When the status is set to disabled, that corresponding SPD entry will be disabled from the CMTS. When the status is set to enabled, that corresponding SPD entr… |
| 1.3.6.1.2.1.10.128.1.4 | NodedocsTrCmSPDBase | |||
| 1.3.6.1.2.1.10.128.1.4.1 | ScalardocsTrCmSPDpersistEnable | read-write | current | truth value contains interpretation of the SPD MIB objects for the CM local ISP selection method. If docsTrCmSPDpersistEnable is false (2), no SPD MIB objects … |
| 1.3.6.1.2.1.10.128.1.4.2 | ScalardocsTrCmSPDname | read-write | current | This object contains the service provider Name |
| 1.3.6.1.2.1.10.128.1.4.3 | ScalardocsTrCmISPphoneNum1 | read-write | current | This object contains the Primary ISP Phone number 1 |
| 1.3.6.1.2.1.10.128.1.4.4 | ScalardocsTrCmISPphoneNum2 | read-write | current | This object contains the Backup Phone number 2 |
| 1.3.6.1.2.1.10.128.1.4.5 | ScalardocsTrCmISPphoneNum3 | read-write | current | This object contains the Backup Phone number 3 |
| 1.3.6.1.2.1.10.128.1.4.6 | ScalardocsTrCmconnThreshold | read-write | current | The number of sequential connection try failures before indicating connection failure. |
| 1.3.6.1.2.1.10.128.1.4.7 | ScalardocsTrCmPPPloginName | read-write | current | This object contains the PPP Login Name |
| 1.3.6.1.2.1.10.128.1.4.8 | ScalardocsTrCmPPPpassword | read-write | current | This object contains the PPP Password |
| 1.3.6.1.2.1.10.128.1.4.9 | ScalardocsTrCmPPPauth | read-write | current | This object contains the secure login verification method |
| 1.3.6.1.2.1.10.128.1.4.10 | ScalardocsTrCmDHCPauth | read-write | current | This object contains the DHCP Server IP Address |
| 1.3.6.1.2.1.10.128.1.4.11 | ScalardocsTrCmradiusRealm | read-write | current | This object contains the RADIUS Cable Access Realm Name |
| 1.3.6.1.2.1.10.128.1.4.12 | ScalardocsTrCmdemandDialTimer | read-write | current | This object represents the number of seconds of networking inactivity allowed before hang-up, the default zero indicates demand dial is not enabled. Demand dia… |
| 1.3.6.1.2.1.10.128.1.4.13 | ScalardocsTrCmDHCPserver | read-write | current | This object contains the DHCP Server IP Address |
| 1.3.6.1.2.1.10.128.1.5 | NodedocsTrCmSessionBase | |||
| 1.3.6.1.2.1.10.128.1.5.1 | ScalardocsTrCmPingAuth | read-write | current | This object has a value of 'true(1)' if CPE is allowed to generate ping (ICMP request) across the network, CPE. |
| 1.3.6.1.2.1.10.128.1.5.2 | ScalardocsTrCmTerminateOnOffHook | read-write | current | This object has a value of 'true(1)' if CM must terminate data session on off hook/voice call events |
| 1.3.6.1.2.1.10.128.1.5.3 | ScalardocsTrCmCMType | read-only | current | This object represents the CM configured type. A CM may be configured as a DOCSIS bridge 'ExtGeneric(1)', as a telephony return IP forwarder 'ExtRouted(2)', or… |
| 1.3.6.1.2.1.10.128.1.5.4 | ScalardocsTrCmRingNoAns | read-write | current | This object defines the number of rings before answer a CM should allow (ring threshold) before failing the connection as NO ANSWER |
| 1.3.6.1.2.1.10.128.1.5.5 | ScalardocsTrCmWaitInterval | read-only | current | This object defines the number of seconds of time CM should wait for a call to ring after dialing |
| 1.3.6.1.2.1.10.128.1.6 | NodedocsTrCmCommand | |||
| 1.3.6.1.2.1.10.128.1.6.1 | ScalardocsTrCmCdCode | read-only | current | The value of this object indicates a further description of what went wrong when a command fails. |
| 1.3.6.1.2.1.10.128.1.6.2 | ScalardocsTrCmCdMgtStationId | read-write | current | This object is a generic read-write variable that a Management Station (MS) can use to guarantee that the results from a given command are the results of a com… |
| 1.3.6.1.2.1.10.128.1.6.3 | ScalardocsTrCmCdReqId | read-write | current | This object contains the request ID field of the SNMP PDU which invoked the most recent command on the telephony return modem, if the request-id is unknown or … |
| 1.3.6.1.2.1.10.128.1.6.4 | ScalardocsTrCmCdResult | read-write | current | This object can contain parameters that are raw results to the particular command being issued. |
| 1.3.6.1.2.1.10.128.1.6.5 | ScalardocsTrCmCdForce | read-write | current | In certain cases the telephony return modem may be in a state where certain commands could adversely affect connections. In such cases, a command request with … |
| 1.3.6.1.2.1.10.128.1.6.6 | ScalardocsTrCmCdScript | read-write | current | This object can contain parameters that specifically define a particular command or series of commands being issued directly to the dial modem. Script executio… |
| 1.3.6.1.2.1.10.128.1.6.7 | ScalardocsTrCmCdStatus | read-only | current | This object contains the result of the most recently requested command or test, or the value none(1) if no commands have been requested since last reset. |
| 1.3.6.1.2.1.10.128.2 | NodedocsTrCmConformance | |||
| 1.3.6.1.2.1.10.128.2.1 | NodedocsTrCmGroups | |||
| 1.3.6.1.2.1.10.128.2.1.1 | GroupdocsTrCmBaseGroup | current | A collection of objects providing CM base parameters | |
| 1.3.6.1.2.1.10.128.2.1.2 | GroupdocsTrMsgBaseGroup | current | A collection of objects providing CM and CMTS message configured parameters | |
| 1.3.6.1.2.1.10.128.2.1.3 | GroupdocsTrTsSPDGroup | current | A collection of objects global SPD configured parameters for CMTS | |
| 1.3.6.1.2.1.10.128.2.1.4 | GroupdocsTrCmSPDBaseGroup | current | A collection of objects providing local SPD parameters for a CM | |
| 1.3.6.1.2.1.10.128.2.1.5 | GroupdocsTrCmSessionBaseGroup | current | A collection of objects providing session based parameters for dial modem | |
| 1.3.6.1.2.1.10.128.2.1.6 | GroupdocsTrCmCommandGroup | current | A collection of objects providing a command script interface to the serial dial modem device | |
| 1.3.6.1.2.1.10.128.2.2 | NodedocsTrCmCompliances | |||
| 1.3.6.1.2.1.10.128.2.2.1 | CompliancedocsCmBasicCompliance | current | The compliance statement for DOCSIS Telephony Return Cable Modems and Cable Modem Termination Systems |