UB-MIB-SUPRV
242 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC1065-SMI | IpAddress |
| RFC1155-SMI | Counter enterprises TimeTicks |
| RFC1158-MIB | DisplayString ifIndex |
| RFC1213 MISSING | PhysAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.75 | NodeubNode | |||
| 1.3.6.1.4.1.75.1 | NodemoduleInserted | A card was inserted in the Access/One chassis. | ||
| 1.3.6.1.4.1.75.1 | NodeubEquip | |||
| 1.3.6.1.4.1.75.1.1 | NodeubSuprv | |||
| 1.3.6.1.4.1.75.1.1.1 | Nodehub | |||
| 1.3.6.1.4.1.75.1.1.1.1 | ScalarhubId | read-only | mandatory | HUB ENCLOSURE Group The address of the hub enclosure in MAC address format. This is the supervisor's MAC address. |
| 1.3.6.1.4.1.75.1.1.1.2 | ScalarhubType | read-only | mandatory | The type of enclosure; the number of slots in the enclosure. |
| 1.3.6.1.4.1.75.1.1.1.3 | ScalarhubName | read-only | mandatory | The name of the Access/One enclosure. |
| 1.3.6.1.4.1.75.1.1.1.4 | ScalarhubSerNumber | read-only | mandatory | The serial number of the hub. |
| 1.3.6.1.4.1.75.1.1.1.5 | ScalarhubIPAddr | read-only | mandatory | The IP address used to communicate with the SNMP agent in the Supervisor. |
| 1.3.6.1.4.1.75.1.1.1.6 | ScalarhubPowerSupplyStatus | read-only | mandatory | The power supply status. |
| 1.3.6.1.4.1.75.1.1.1.7 | ScalarhubTempStatus | read-only | mandatory | Indicates whether the temperature of at least one card in the enclosure is out of range. |
| 1.3.6.1.4.1.75.1.1.1.8 | ScalarhubPollTime | read-only | mandatory | The time in tenths of seconds between polls of hub cards by the supervisor. |
| 1.3.6.1.4.1.75.1.1.1.9 | ScalarhubResetAction | read-write | mandatory | When this internet-object is SET to a value of requested, resetAllCards, or forceLoad, the hub resets (according to the specific request), and after resetting … |
| 1.3.6.1.4.1.75.1.1.1.10 | ScalarhubAFS | read-only | mandatory | Indicates whether airflow inside the enclosure is normal. This applies only to enclosures with an Air Flow Sensor (AFS) installed and a supervisor capable of d… |
| 1.3.6.1.4.1.75.1.1.2 | Nodecard | |||
| 1.3.6.1.4.1.75.1.1.2.1 | ScalarensupStaticNetConfig | read-only | mandatory | CARD Group ensup: Ethernet Supervisor The configured status of the interface between the net module(s) and the backbone. |
| 1.3.6.1.4.1.75.1.1.2.2 | ScalarensupDynamicNetStatus | read-only | mandatory | The dynamically changed configuration status of the interface between the net module(s) and the backbone. |
| 1.3.6.1.4.1.75.1.1.2.3 | ScalarensupNetBridgeSlot | read-only | mandatory | The relative group (slot) containing a local bridge by which the modules access the backbone (relevant only if the value of ensupStaticNetConfig is 'sup-bridge… |
| 1.3.6.1.4.1.75.1.1.2.4 | ScalarensupCarrierCounter | read-only | mandatory | The number of times that carrier sense was on when sampled every 2 ms (used in conjunction with a1gUpTime). |
| 1.3.6.1.4.1.75.1.1.2.5 | ScalarensupNetUtilization | read-only | mandatory | The percentage of time that carrier sense was on; the percentage is expressed to the nearest tenth (as XXX.X%). |
| 1.3.6.1.4.1.75.1.1.2.6 | ScalarensupNetUtilThreshold | read-only | mandatory | The threshold for ensupNetUtilization (sends a trap when exceeded).Percentage utilization to the nearest whole integer. |
| 1.3.6.1.4.1.75.1.1.2.7 | Tablea1gTable | not-accessible | mandatory | a1g: Access/1 Group TABLE Row selection: the card's relative position in the enclosure, starting at 1. |
| 1.3.6.1.4.1.75.1.1.2.7.1 | Rowa1gEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.75.1.1.2.7.1.1 | Columna1gSlotId | read-only | mandatory | The card's relative position in the enclosure, starting at 1. |
| 1.3.6.1.4.1.75.1.1.2.7.1.2 | Columna1gPorts | read-only | mandatory | The number of ports on a card. |
| 1.3.6.1.4.1.75.1.1.2.7.1.3 | Columna1gOperStatus | read-only | mandatory | states the module goes through when doing power-on diagnostics. |
| 1.3.6.1.4.1.75.1.1.2.7.1.4 | Columna1gTempStatus | read-only | mandatory | An indication whether the card's temperature is too high. |
| 1.3.6.1.4.1.75.1.1.2.7.1.5 | Columna1gEthBusAdmAction | read-write | mandatory | The administrative status of a module's Ethernet Bus interface (action). For an ASM320, if a1gEthBusMgmtStatus == lockedByJumper, then values of this attribute… |
| 1.3.6.1.4.1.75.1.1.2.7.1.6 | Columna1gEthBusMgmtStatus | read-only | mandatory | The management status of a module's Ethernet bus interface. |
| 1.3.6.1.4.1.75.1.1.2.7.1.7 | Columna1gNetMgmtBusOperStatus | read-only | mandatory | The operational status of the network management interface from the supervisor to the module (the control bus). |
| 1.3.6.1.4.1.75.1.1.2.7.1.8 | Columna1gProductType | read-only | mandatory | The product type of an A/1 card. |
| 1.3.6.1.4.1.75.1.1.2.7.1.9 | Columna1gUpTime | read-only | mandatory | The elapsed time since the module started operating. |
| 1.3.6.1.4.1.75.1.1.2.7.1.10 | Columna1gResets | read-only | mandatory | The number of times a module has been reset. |
| 1.3.6.1.4.1.75.1.1.2.7.1.11 | Columna1gResetAction | read-write | mandatory | When this internet-object is SET to one of the request values, the card resets, and after resetting retains the value that was SET. Initially its value is not-… |
| 1.3.6.1.4.1.75.1.1.2.8 | TableconfigTable | not-accessible | mandatory | config: Access/1 Group Configuration TABLE Row selection: the card's relative position in the enclosure, starting at 1. |
| 1.3.6.1.4.1.75.1.1.2.8.1 | RowconfigEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.75.1.1.2.8.1.1 | ColumnconfigSlotId | read-only | mandatory | The card's relative position in the enclosure, starting at 1. |
| 1.3.6.1.4.1.75.1.1.2.8.1.2 | ColumnconfigFaultActionType | read-only | mandatory | The action to be taken by the Supervisor following a fault on a card. |
| 1.3.6.1.4.1.75.1.1.2.8.1.3 | ColumnconfigRetries | read-only | mandatory | The maximum number of times a reset is attempted when configFaultAction is set to reset (no further attempts are made once the reset is successful). |
| 1.3.6.1.4.1.75.1.1.2.8.1.4 | ColumnconfigPowerUpMode | read-only | mandatory | The actions taken by the module immediately after power up (pod is Power On Diagnostics). |
| 1.3.6.1.4.1.75.1.1.2.9 | Tablea1imTable | not-accessible | mandatory | a1im: Access/1 Intelligent Module TABLE Row selection: the value of the internet-object a1imSlotId, which contains the relative position of a card within an en… |
| 1.3.6.1.4.1.75.1.1.2.9.1 | Rowa1imEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.75.1.1.2.9.1.1 | Columna1imSlotId | read-only | mandatory | The relative slot position of a card, starting at 1. |
| 1.3.6.1.4.1.75.1.1.2.9.1.2 | Columna1imMACAddr | read-only | mandatory | The module's MAC address (for a bridge, its first network interface). May be (e.g., for the TRC-410) a unique id chosen from the set of MAC addresses. |
| 1.3.6.1.4.1.75.1.1.2.9.1.3 | Columna1imPodDiagnosticMsg | read-only | mandatory | A text message describing a power-on-diagnostic state. |
| 1.3.6.1.4.1.75.1.1.2.9.1.4 | Columna1imModuleFault | read-only | mandatory | Faults detected by the module. |
| 1.3.6.1.4.1.75.1.1.2.9.1.5 | Columna1imHaltReason | read-only | mandatory | The last specific halt reason detected by the card. |
| 1.3.6.1.4.1.75.1.1.2.9.1.6 | Columna1imDebugRegisters | read-only | mandatory | A set of 14 80186 registers used for debugging purposes. These are CS, IP, FLAG, AX, BX, CX, DX, SP, BP, SI, DI, DS, ES, and SS. |
| 1.3.6.1.4.1.75.1.1.2.10 | TabletplTable | not-accessible | mandatory | tpl: Transport Layer TABLE Row selection: the value of the internet-object tplSlotId, which contains the relative position of a card within an enclosure, start… |
| 1.3.6.1.4.1.75.1.1.2.10.1 | RowtplEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.75.1.1.2.10.1.1 | ColumntplSlotId | read-only | mandatory | The relative slot position of a card, starting at 1. |
| 1.3.6.1.4.1.75.1.1.2.10.1.2 | ColumntplIPAddress | read-only | mandatory | The card's IP address (only applies to TCP/IP) |
| 1.3.6.1.4.1.75.1.1.2.10.1.3 | ColumntplNiuName | read-only | mandatory | The card's Niu name (only applies to ISO) |
| 1.3.6.1.4.1.75.1.1.2.10.1.4 | ColumntplProtocolType | read-only | mandatory | The type of transport protocol used by the module. |
| 1.3.6.1.4.1.75.1.1.2.10.1.5 | ColumntplSuprvPollStatus | read-only | mandatory | Indicates whether the module has responded to supervisor polling over Ethernet. |
| 1.3.6.1.4.1.75.1.1.2.11 | TableimenEthBusTable | not-accessible | mandatory | imen: Intelligent Module Ethernet Datalink TABLE (Ethernet Bus interface) Row selection: the value of the internet-object imenSlotId, which contains the relati… |
| 1.3.6.1.4.1.75.1.1.2.11.1 | RowimenEthBusEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.75.1.1.2.11.1.1 | ColumnimenSlotId | read-only | mandatory | The relative position of the card in the enclosure, starting from 1. |
| 1.3.6.1.4.1.75.1.1.2.11.1.2 | ColumnimenTransmitPkts | read-only | mandatory | The total number of packets transmitted. |
| 1.3.6.1.4.1.75.1.1.2.11.1.3 | ColumnimenReceivePkts | read-only | mandatory | The total number of packets received. |
| 1.3.6.1.4.1.75.1.1.2.11.1.4 | ColumnimenCRCErrors | read-only | mandatory | The number of packets received with CRC errors. |
| 1.3.6.1.4.1.75.1.1.2.11.1.5 | ColumnimenCollisions | read-only | mandatory | The number of packets transmitted with collision detected. |
| 1.3.6.1.4.1.75.1.1.2.12 | TablebrdgTable | not-accessible | mandatory | brdg: Bridge TABLE Row selection: the value of the internet-object brdgSlotId, which contains the relative position of a card within an enclosure, starting at … |
| 1.3.6.1.4.1.75.1.1.2.12.1 | RowbrdgEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.75.1.1.2.12.1.1 | ColumnbrdgSlotId | read-only | mandatory | The relative slot (from 1) containing this card. |
| 1.3.6.1.4.1.75.1.1.2.12.1.2 | ColumnbrdgIfId | read-only | mandatory | The relative interface (from 1) of this entry (see the appropriate hardware specification to determine which interface is 1, 2, etc.). |
| 1.3.6.1.4.1.75.1.1.2.12.1.3 | ColumnbrdgIfType | read-only | mandatory | The type of bridge interface. |
| 1.3.6.1.4.1.75.1.1.2.12.1.4 | ColumnbrdgIfFault | read-only | mandatory | Bridge faults (note these are interface specific). |
| 1.3.6.1.4.1.75.1.1.2.12.1.5 | ColumnbrdgIfMACAddr | read-only | mandatory | The MAC address of the bridge's specific interface |
| 1.3.6.1.4.1.75.1.1.2.13 | TableecTable | not-accessible | mandatory | ec: Ethernet Concentrator TABLE Row selection: the value of the internet-object ecSlotId, which contains the relative position of a card within an enclosure, s… |
| 1.3.6.1.4.1.75.1.1.2.13.1 | RowecEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.75.1.1.2.13.1.1 | ColumnecSlotId | read-only | mandatory | The relative slot (from 1) containing this card. |
| 1.3.6.1.4.1.75.1.1.2.13.1.2 | ColumnecCarrierCounter | read-only | mandatory | The number of times carrier was sensed when sampled every 2 ms. |
| 1.3.6.1.4.1.75.1.1.2.13.1.3 | ColumnecFanStatus | read-only | mandatory | The status of the Temp/Flex mount adaptor fan (on the ASM-800 (fiber EC) only). |
| 1.3.6.1.4.1.75.1.1.2.14 | TablenetTable | not-accessible | mandatory | net: NET Card TABLE Row selection: the value of the internet-object netSlotId, which contains the relative position of a card within an enclosure, starting at … |
| 1.3.6.1.4.1.75.1.1.2.14.1 | RownetEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.75.1.1.2.14.1.1 | ColumnnetSlotId | read-only | mandatory | The relative slot (from 1) containing this card. |
| 1.3.6.1.4.1.75.1.1.2.14.1.2 | ColumnnetBackboneType | read-only | mandatory | The type of backbone to which the NET interface is attached. |
| 1.3.6.1.4.1.75.1.1.2.14.1.3 | ColumnnetFault | read-only | mandatory | An interface fault at various points between the module and the attached backbone. |
| 1.3.6.1.4.1.75.1.1.2.14.1.4 | ColumnnetBackboneStatus | read-only | mandatory | Backbone interface status: the status of the interface or interfaces to the backbone. |
| 1.3.6.1.4.1.75.1.1.2.15 | TablebrnTable | not-accessible | mandatory | brn: Buffer Repeater NET Card TABLE Row selection: the value of the internet-object brnSlotId, which contains the relative position of a card within an enclosu… |
| 1.3.6.1.4.1.75.1.1.2.15.1 | RowbrnEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.75.1.1.2.15.1.1 | ColumnbrnSlotId | read-only | mandatory | The relative slot (from 1) containing this card. |
| 1.3.6.1.4.1.75.1.1.2.15.1.2 | ColumnbrnIfId | read-only | mandatory | The relative interface (from 1) containing this card; interface 1 is the Ethernet Bus interface. |
| 1.3.6.1.4.1.75.1.1.2.15.1.3 | ColumnbrnIfEthDLCStatus | read-only | mandatory | The Ethernet Data Link Control status of the last transmission to the segment attached to the buffered repeater net card. |
| 1.3.6.1.4.1.75.1.1.2.15.1.4 | ColumnbrnCarrierCounter | read-only | mandatory | The number of times carrier was sensed when sampled every 1 ms. |
| 1.3.6.1.4.1.75.1.1.2.15.1.5 | ColumnbrnCarrierTimeInterval | read-only | mandatory | The time interval over which brnCarrierCounter counts. |
| 1.3.6.1.4.1.75.1.1.2.15.1.6 | ColumnbrnTransmitPkts | read-only | mandatory | The total number of packets transmitted. |
| 1.3.6.1.4.1.75.1.1.2.15.1.7 | ColumnbrnReceivePkts | read-only | mandatory | The total number of packets received. |
| 1.3.6.1.4.1.75.1.1.2.15.1.8 | ColumnbrnCRCErrors | read-only | mandatory | The number of packets received with CRC errors. |
| 1.3.6.1.4.1.75.1.1.2.15.1.9 | ColumnbrnCollisions | read-only | mandatory | The number of collisions detected. |
| 1.3.6.1.4.1.75.1.1.2.15.1.10 | ColumnbrnPktsAborted16Colls | read-only | mandatory | The number of packets aborted because of 16 consecutive collisions detected. |
| 1.3.6.1.4.1.75.1.1.2.15.1.11 | ColumnbrnShortPkts | read-only | mandatory | The total number of short packets received. |
| 1.3.6.1.4.1.75.1.1.2.15.1.12 | ColumnbrnAlignmentErrors | read-only | mandatory | The total number of packets received with alignment errors: the number of frames received that are not an integral number of octets and do not pass the FCS che… |
| 1.3.6.1.4.1.75.1.1.2.15.1.13 | ColumnbrnOverflows | read-only | mandatory | The number of packets received that had to be discarded due to errors in bit frequency resulting in overflow. |
| 1.3.6.1.4.1.75.1.1.2.15.1.14 | ColumnbrnUnderflows | read-only | mandatory | The number of packets received that had to be discarded due to errors in bit frequency resulting in underflow. |
| 1.3.6.1.4.1.75.1.1.2.16 | Tabletr16cTable | not-accessible | mandatory | tr16c: Token Ring Concentrator Card TABLE Row selection: the value of the internet-object tr16cSlotId, which contains the relative position of a card within an… |
| 1.3.6.1.4.1.75.1.1.2.16.1 | Rowtr16cEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.75.1.1.2.16.1.1 | Columntr16cSlotId | read-only | mandatory | The relative slot number, starting at 1, of the concentrator. |
| 1.3.6.1.4.1.75.1.1.2.16.1.2 | Columntr16cTier | read-only | mandatory | 17,32 RelayID Indicates the management level of functionality (tier) of this concentrator. |
| 1.3.6.1.4.1.75.1.1.2.16.1.3 | Columntr16cOperState | read-only | mandatory | The operational state of the ring. |
| 1.3.6.1.4.1.75.1.1.2.16.1.4 | Columntr16cRingNumber | read-only | mandatory | The ring number assigned when configuring a bridge. |
| 1.3.6.1.4.1.75.1.1.2.16.1.5 | Columntr16cManufacturerID | read-only | mandatory | The Organization Unique Identifier as defined in IEEE 802.1A, Overview and Architecture. This is the first 24 bits of UB's MAC address identifying UB uniquely … |
| 1.3.6.1.4.1.75.1.1.2.16.1.6 | Columntr16cManufacturerProductID | read-only | mandatory | A string of ASCII characters representing the concentrator's product identifier (i.e., a name identifying an enumeration of a1gProductType). Some examples are … |
| 1.3.6.1.4.1.75.1.1.2.16.1.7 | Columntr16cManufProductVers | read-only | mandatory | A string that is unique for a specific manufacturerProductID that identifies a concentrators's hardware and firmware versions. The two octets are non-negative … |
| 1.3.6.1.4.1.75.1.1.2.16.1.8 | Columntr16cActiveMonitorPortNumber | read-only | mandatory | The relative port number of the active monitor for this ring. Its value is 0 if the active monitor is not attached to any port on this concentrator. |
| 1.3.6.1.4.1.75.1.1.2.16.1.9 | Columntr16cRingSpeed | read-only | mandatory | 17 RingSpeed The current concentrator operating speed of either 4 or 16 Mbps. Note that each concentrator in a ring must be configured with the same value of t… |
| 1.3.6.1.4.1.75.1.1.2.16.1.10 | Columntr16cLLCFrames | read-only | mandatory | 26 TotalLLCFramesThe total number of transmitted frames that are not MAC level management frames. |
| 1.3.6.1.4.1.75.1.1.2.16.1.11 | Columntr16cMACFrames | read-only | mandatory | 26 TotalMACFramesThe total number of transmitted frames that are MAC level management frames. |
| 1.3.6.1.4.1.75.1.1.2.16.1.12 | Columntr16cOctets | read-only | mandatory | 26 TotalOctetsThe total number of octets transmitted. |
| 1.3.6.1.4.1.75.1.1.2.16.1.13 | Columntr16cMulticastFrames | read-only | mandatory | 26 TotalMulticastFramesThe total number of frames with a destination address that is either a Functional Group Address or a Group Address. |
| 1.3.6.1.4.1.75.1.1.2.16.1.14 | Columntr16cBroadcastFrames | read-only | mandatory | 26 TotalBroadcastFramesThe total number of frames with a destination address that is a Broadcast Address. |
| 1.3.6.1.4.1.75.1.1.2.16.1.15 | Columntr16cFrameCheckSequences | read-only | mandatory | 26,27 TotalFrameCheckSequenceThe total number of packets with an FCS error. |
| 1.3.6.1.4.1.75.1.1.2.16.1.16 | Columntr16cAutoPartitionEnableTimer | read-write | mandatory | 25 AutoPartitionEnableTimer *a Indicates the period of time to wait until re-enabling a 'beacon detected' port. the default value is 0 seconds |
| 1.3.6.1.4.1.75.1.1.2.16.1.17 | Columntr16cAutoPartitionHoldTimer | read-write | mandatory | 25 AutoPartitionHoldTimer *a Indicates the amount of time to wait until starting the beacon detect process. The default value is 0 seconds. |
| 1.3.6.1.4.1.75.1.1.2.16.1.18 | Columntr16cAutoPartitionRetries | read-write | mandatory | 25 AutoPartitionThreshold *a Indicates the number of times a port can be temporarily locked by the beacon detect process prior to being permanently locked. The… |
| 1.3.6.1.4.1.75.1.1.2.16.1.19 | Columntr16cLLCSamples | read-only | mandatory | 26,27 BandwidthUtilizationA count of the number of times that an LLC packet was present when sampling every millisecond. |
| 1.3.6.1.4.1.75.1.1.2.16.1.20 | Columntr16cMACSamples | read-only | mandatory | 26,27 BandwidthUtilizationA count of the number of times that a MAC frame was present when sampling every millisecond. |
| 1.3.6.1.4.1.75.1.1.2.16.1.21 | Columntr16cUpTimeMS | read-only | mandatory | 26,27 BandwidthUtilization The elapsed time in milliseconds since the concentrator started operating. |
| 1.3.6.1.4.1.75.1.1.2.16.1.22 | Columntr16cResetDurableUserAttrs | read-write | mandatory | A request to copy the default values stored in durable memory to the User Durable attributes also in durable memory. The User attributes affected are tr16cRing… |
| 1.3.6.1.4.1.75.1.1.2.17 | Tabletr16reTable | not-accessible | mandatory | tr16re: Token Ring Concentrator Ring Error TABLE Row selection: the value of the internet-object tr16cSlotId, which contains the relative position of a card wi… |
| 1.3.6.1.4.1.75.1.1.2.17.1 | Rowtr16reEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.75.1.1.2.17.1.1 | Columntr16reSlotId | read-only | mandatory | The relative slot in the hub enclosure, starting at 1. |
| 1.3.6.1.4.1.75.1.1.2.17.1.2 | Columntr16reLostFrames | read-only | mandatory | Non-isolating lost frames. |
| 1.3.6.1.4.1.75.1.1.2.17.1.3 | Columntr16reRcvCongestionErrors | read-only | mandatory | Non-isolating congestion on receive errors. |
| 1.3.6.1.4.1.75.1.1.2.17.1.4 | Columntr16reFrequencyErrors | read-only | mandatory | Non-isolating frequency errors. |
| 1.3.6.1.4.1.75.1.1.2.17.1.5 | Columntr16reFrameCopyErrors | read-only | mandatory | Non-isolating frame copy errors. |
| 1.3.6.1.4.1.75.1.1.2.17.1.6 | Columntr16reTokenErrors | read-only | mandatory | Non-isolating token errors. |
| 1.3.6.1.4.1.75.1.1.3 | Nodeport | |||
| 1.3.6.1.4.1.75.1.1.3.1 | TableecpTable | not-accessible | mandatory | PORT Group ecp: Ethernet Port TABLE Row selection: the value of the internet-object ecpSlotId, which contains the relative position of a card within an enclosu… |
| 1.3.6.1.4.1.75.1.1.3.1.1 | RowecpEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.75.1.1.3.1.1.1 | ColumnecpSlotId | read-only | mandatory | The relative slot (from 1) containing the card. |
| 1.3.6.1.4.1.75.1.1.3.1.1.2 | ColumnecpPortId | read-only | mandatory | The relative port (from 1) on the card. |
| 1.3.6.1.4.1.75.1.1.3.1.1.3 | ColumnecpMgmtStatus | read-only | mandatory | The management status of an Ethernet port. |
| 1.3.6.1.4.1.75.1.1.3.1.1.4 | ColumnecpAdmAction | read-write | mandatory | The administrative status of an Ethernet port. |
| 1.3.6.1.4.1.75.1.1.3.1.1.5 | ColumnecpCarrierCounter | read-only | mandatory | The number of times carrier was sensed on the port when sampled every 2 ms. |
| 1.3.6.1.4.1.75.1.1.3.2 | TableecfpTable | not-accessible | mandatory | ecfp: Ethernet Concentrator Fiber Port TABLE Row selection: the value of the internet-object ecfpSlotId, which contains the relative position of a card within … |
| 1.3.6.1.4.1.75.1.1.3.2.1 | RowecfpEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.75.1.1.3.2.1.1 | ColumnecfpSlotId | read-only | mandatory | The relative slot (from 1) containing the card. |
| 1.3.6.1.4.1.75.1.1.3.2.1.2 | ColumnecfpPortId | read-only | mandatory | The relative port (from 1) on the card. |
| 1.3.6.1.4.1.75.1.1.3.2.1.3 | ColumnecfpMACAddr | read-only | mandatory | The latest source MAC address from packets received from the MAC side of the AUI |
| 1.3.6.1.4.1.75.1.1.3.2.1.4 | ColumnecfpTxIdleTime | read-only | mandatory | The elapsed time since the last packet was transmitted. |
| 1.3.6.1.4.1.75.1.1.3.3 | Tableec10btpTable | not-accessible | mandatory | ec10btp: Ethernet Concentrator 10BaseT Port TABLE Row selection: the value of the internet-object ec10btpSlotId, which contains the relative position of a card… |
| 1.3.6.1.4.1.75.1.1.3.3.1 | Rowec10btpEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.75.1.1.3.3.1.1 | Columnec10btpSlotId | read-only | mandatory | The relative slot (from 1) containing the card. |
| 1.3.6.1.4.1.75.1.1.3.3.1.2 | Columnec10btpPortId | read-only | mandatory | The relative port (from 1) on the card. |
| 1.3.6.1.4.1.75.1.1.3.3.1.3 | Columnec10btpLinkTestStatus | read-only | mandatory | The result of the link integrity test. |
| 1.3.6.1.4.1.75.1.1.3.3.1.4 | Columnec10btpLinkTestAction | read-write | mandatory | A request to unlock the link integrity test (which is a continuous test). |
| 1.3.6.1.4.1.75.1.1.3.4 | TabletrcpTable | not-accessible | mandatory | trcp: Token Ring Concentrator Port TABLE Row selection: the value of the internet-object trcpSlotId, which contains the relative position of a card within an e… |
| 1.3.6.1.4.1.75.1.1.3.4.1 | RowtrcpEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.75.1.1.3.4.1.1 | ColumntrcpSlotId | read-only | mandatory | The relative slot (from 1) containing the card. |
| 1.3.6.1.4.1.75.1.1.3.4.1.2 | ColumntrcpPortId | read-only | mandatory | The relative port (from 1) on the card. |
| 1.3.6.1.4.1.75.1.1.3.4.1.3 | ColumntrcpAdmAction | read-write | mandatory | The administrative status of a token ring port. It reflects only administrative status. |
| 1.3.6.1.4.1.75.1.1.3.4.1.4 | ColumntrcpOperStatus | read-only | mandatory | The operational status of a token ring port. |
| 1.3.6.1.4.1.75.1.1.3.5 | Tabletr16p1Table | not-accessible | mandatory | tr16p1: Token Ring Concentrator Port Tier 1 TABLE Row selection: the value of the internet-object tr16p1SlotId, which contains the relative position of a card … |
| 1.3.6.1.4.1.75.1.1.3.5.1 | Rowtr16p1Entry | not-accessible | mandatory | |
| 1.3.6.1.4.1.75.1.1.3.5.1.1 | Columntr16p1SlotId | read-only | mandatory | The relative position (starting at 1) of the concentrator's slot within the enclosure. |
| 1.3.6.1.4.1.75.1.1.3.5.1.2 | Columntr16p1PortId | read-only | mandatory | The relative port on the card starting at 1. Ports 1-12 are ring station ports, 13 is the expansion in port, and 14 is the expansion out port. |
| 1.3.6.1.4.1.75.1.1.3.5.1.3 | Columntr16p1InsertionState | read-only | mandatory | The end result of tr16p1AllowInsert, tr16p1ForceInsert, and tr16p1PhantomState, i.e., inserted means tr16p1ForceInsert | tr16p1AllowInsert & tr16p1PhantomState… |
| 1.3.6.1.4.1.75.1.1.3.5.1.4 | Columntr16p1AllowInsert | read-write | mandatory | 19 RingStationPortAction *aAn action that allows an RS port to insert onto its ring if both phantom voltages are present (tr16p1PhantomState is phantomPresent)… |
| 1.3.6.1.4.1.75.1.1.3.5.1.5 | Columntr16p1ForceInsert | read-write | mandatory | 19 RingStationPortInsert *aWhen forcedInsertion, forces an RS port to insert onto its ring regardless of whether phantom voltage or other conditions are detect… |
| 1.3.6.1.4.1.75.1.1.3.5.1.6 | Columntr16p1PhantomState | read-only | mandatory | 19 ExpansionInPhantomDetect Indicates the XI port detects phantom voltage being provided.20 ExpansionOutPhantomLoadDetect The status of the phantom voltage pro… |
| 1.3.6.1.4.1.75.1.1.3.6 | Tabletr16p2Table | not-accessible | mandatory | tr16p2: Token Ring Concentrator Port Tiers 2,3 TABLE Row selection: the value of the internet-object tr16p2SlotId, which contains the relative position of a ca… |
| 1.3.6.1.4.1.75.1.1.3.6.1 | Rowtr16p2Entry | not-accessible | mandatory | |
| 1.3.6.1.4.1.75.1.1.3.6.1.1 | Columntr16p2SlotId | read-only | mandatory | The relative position (starting at 1) of the concentrator's slot within the enclosure. |
| 1.3.6.1.4.1.75.1.1.3.6.1.2 | Columntr16p2PortId | read-only | mandatory | The relative port on the card starting at 1. Ports 1-12 are ring station ports, 13 is the expansion in port, and 14 is the expansion out port. |
| 1.3.6.1.4.1.75.1.1.3.6.1.3 | Columntr16p2OperState | read-only | mandatory | 25 RingStationAutoPartitionState25 RingExpansionInPartitionState25 ExpansionOutAutoPartitionState Indicates whether a hard failure has occurred on a port, been… |
| 1.3.6.1.4.1.75.1.1.3.6.1.4 | Columntr16p2BeaconDetects | read-only | mandatory | 25 RingStationAutoPartitionCount25 ExpansionInAutoPartitionCount25 ExpansionOutAutoPartitionCount Indicates the number of beacon detects that have resulted in … |
| 1.3.6.1.4.1.75.1.1.3.6.1.5 | Columntr16p2LastSourceAddress | read-only | mandatory | 23,27 RingStationLastSourceAddress23,27 ExpansionInLastSourceAddress23,27 ExpansionOutLastSourceAddress Address of previously attached node. |
| 1.3.6.1.4.1.75.1.1.3.6.1.6 | Columntr16p2LLCFramesTransmitted | read-only | mandatory | 27 RingStationLLCFramesTransmitted 27 ExpansionInLLCFramesTransmitted 27 ExpansionOutLLCFramesTransmitted Total number of non-MAC Management packets transmitte… |
| 1.3.6.1.4.1.75.1.1.3.6.1.7 | Columntr16p2LLCFramesReceived | read-only | mandatory | 27 RingStationLLCFramesReceived 27 ExpansionInLLCFramesReceived 27 ExpansionOutLLCFramesReceived Total number of non-MAC Management packets received. |
| 1.3.6.1.4.1.75.1.1.3.6.1.8 | Columntr16p2MACFramesTransmitted | read-only | mandatory | 27 RingStationMACFramesTransmitted27 ExpansionInMACFramesTransmitted27 ExpansionOutMACFramesTransmitted Total number of MAC Management packets transmitted. |
| 1.3.6.1.4.1.75.1.1.3.6.1.9 | Columntr16p2MACFramesReceived | read-only | mandatory | 27 RingStationMACFramesReceived27 ExpansionInMACFramesReceived27 ExpansionOutMACFramesReceived Total number of MAC Management packets received. |
| 1.3.6.1.4.1.75.1.1.3.6.1.10 | Columntr16p2OctetsTransmitted | read-only | mandatory | 27 RingStationOctetsTransmitted27 ExpansionInOctetsTransmitted27 ExpansionOutOctetsTransmitted Total number of LLC Information octets transmitted. |
| 1.3.6.1.4.1.75.1.1.3.6.1.11 | Columntr16p2OctetsReceived | read-only | mandatory | 27 RingStationOctetsReceived27 ExpansionInOctetsReceived27 ExpansionOutOctetsReceived Total number of LLC Information Field octets received. |
| 1.3.6.1.4.1.75.1.1.3.6.1.12 | Columntr16p2MulticastsTransmitted | read-only | mandatory | 28 RingStationMulticastTransmitted 28 ExpansionInMulticastTransmitted 28 ExpansionOutMulticastTransmitted Total number of Multicast packets transmitted. |
| 1.3.6.1.4.1.75.1.1.3.6.1.13 | Columntr16p2BroadcastsTransmitted | read-only | mandatory | 28 RingStationBroadcastTransmitted28 ExpansionOutBroadcastTransmitted28 ExpansionInBroadcastTransmitted Total number of Broadcast packets transmitted. |
| 1.3.6.1.4.1.75.1.1.3.6.1.14 | Columntr16p2FCSErrorsTransmitted | read-only | mandatory | 28 RingStationFCSErrorsTransmitted28 ExpansionInFCSErrorsTransmitted28 ExpansionOutFCSErrorsTransmitted Total number of packets transmitted with an FCS error. |
| 1.3.6.1.4.1.75.1.1.3.6.1.15 | Columntr16p2FCSErrorsReceived | read-only | mandatory | 28 RingStationFCSErrorsReceived28 ExpansionInFCSErrorsReceived28 ExpansionOutFCSErrorsReceived Total number of packets received with an FCS error. |
| 1.3.6.1.4.1.75.1.1.3.6.1.16 | Columntr16p2LastSourceAddressUptime | read-only | mandatory | Time since the value of tr16p2LastSourceAddress last changed. |
| 1.3.6.1.4.1.75.1.1.3.7 | Tabletr16p3Table | not-accessible | mandatory | tr16p3: Token Ring Concentrator Port Tiers 2,3 TABLE Row selection: the value of the internet-object tr16p3SlotId, which contains the relative position of a ca… |
| 1.3.6.1.4.1.75.1.1.3.7.1 | Rowtr16p3Entry | not-accessible | mandatory | |
| 1.3.6.1.4.1.75.1.1.3.7.1.1 | Columntr16p3SlotId | read-only | mandatory | The relative position (starting at 1) of the concentrator's slot within the enclosure. |
| 1.3.6.1.4.1.75.1.1.3.7.1.2 | Columntr16p3PortId | read-only | mandatory | The relative port on the card starting at 1. Ports 1-12 are ring station ports, 13 is the expansion in port, and 14 is the expansion out port. |
| 1.3.6.1.4.1.75.1.1.3.7.1.3 | Columntr16p3LineErrors | read-only | mandatory | Isolating line errors. |
| 1.3.6.1.4.1.75.1.1.3.7.1.4 | Columntr16p3InternalErrors | read-only | mandatory | Isolating internal errors. |
| 1.3.6.1.4.1.75.1.1.3.7.1.5 | Columntr16p3Burst5Errors | read-only | mandatory | Isolating burst 5 errors. |
| 1.3.6.1.4.1.75.1.1.3.7.1.6 | Columntr16p3AcErrors | read-only | mandatory | Isolating AC errors. |
| 1.3.6.1.4.1.75.1.1.3.7.1.7 | Columntr16p3AbortDelimiters | read-only | mandatory | Isolating abort delimiters. |
| 1.3.6.1.4.1.75.2 | NodemoduleRemoved | A card was removed from the Access/One chassis. | ||
| 1.3.6.1.4.1.75.3 | NodemoduleFaulty | A card has become faulty: its state changed to a1gOperStatus (moduleFault(6)). | ||
| 1.3.6.1.4.1.75.3 | NodeubTrapAttrs | |||
| 1.3.6.1.4.1.75.3.1 | ScalartrapInstanceId | not-accessible | mandatory | TRAP Group: The attributes that may appear in the variable-bindings list of the Trap-PDU. An instance identifier that uniquely identifies an occurrence of a tr… |
| 1.3.6.1.4.1.75.3.2 | ScalartrapSlotId | not-accessible | optional | trapSource (consists of the following):The attributes required to define the source of the trap. For example, when a port is unlocked, the slot identifier and … |
| 1.3.6.1.4.1.75.3.3 | ScalartrapProductType | not-accessible | mandatory | The product type of the Access/One card that the trap is about.See a1gProductType for specific values. |
| 1.3.6.1.4.1.75.3.4 | ScalartrapPortID | not-accessible | optional | The relative port (from 1) that the trap is about. |
| 1.3.6.1.4.1.75.3.15 | ScalartrapPortCount | not-accessible | optional | The number of ports on a concentrator. |
| 1.3.6.1.4.1.75.3.16 | ScalartrapPortMask | not-accessible | optional | A mask indicating the status of ports on the concentrator. |
| 1.3.6.1.4.1.75.4 | NodemoduleDown | A card has not responded to a supervisor poll: its state changed to a1gEthBusMgmtStatus(notResponding(4)). | ||
| 1.3.6.1.4.1.75.4 | NodeubSystem | |||
| 1.3.6.1.4.1.75.4.1 | NodeubSecurity | |||
| 1.3.6.1.4.1.75.4.1.2 | TabletrpsbTable | not-accessible | mandatory | TRAP SUBSCRIPTION Group Trap Subscription TABLE Row selection: the value of the internet-object trpsbIpAddress identifies a row corresponding to a valid member… |
| 1.3.6.1.4.1.75.4.1.2.1 | RowtrpsbEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.75.4.1.2.1.1 | ColumntrpsbIpAddress | read-write | mandatory | The IP address of a manager subscribing to traps. |
| 1.3.6.1.4.1.75.4.1.2.1.2 | ColumntrpsbCommunity | read-write | mandatory | The community string identifying a manager subscribing to traps. |
| 1.3.6.1.4.1.75.4.1.2.1.3 | ColumntrpsbActions | write-only | mandatory | Actions on a manager's trap subscription. |
| 1.3.6.1.4.1.75.5 | NodemoduleReset | A card has been reset: its state changed to a1gOperStatus (reset(13)). | ||
| 1.3.6.1.4.1.75.6 | NodemoduleDebug | A card has put into debug mode: its state changed to a1gOperStatus (debugMode(4)). | ||
| 1.3.6.1.4.1.75.7 | NodemoduleHighTemperature | The card's temperature has become too high: its state changed to a1gTempStatus(abnormal(2)). | ||
| 1.3.6.1.4.1.75.8 | NodeethBusUnlocked | The interface to the Ethernet bus has been unlocked: its state changed to a1gEthBusAdmAction(unlock(2)). | ||
| 1.3.6.1.4.1.75.9 | NodeethBusLocked | The interface to the Ethernet bus has been locked: its state changed to a1gEthBusAdmAction(lock(3)). | ||
| 1.3.6.1.4.1.75.16 | NodemoduleNetIfEnabled | The status of the interface to the backbone has changed so that all modules (with the possible exception of the supervisor - when it is in direct mode) access … | ||
| 1.3.6.1.4.1.75.17 | NodemoduleNetIfDisabled | The status of the interface to the backbone has changed so that there is no communication backbone through the card's net interface: a state change to netBackb… | ||
| 1.3.6.1.4.1.75.18 | NodemoduleNetIfLoopBack | The status of the interface to the backbone has changed so that this card's net interface loops back traffic directed to the backbone, while the other (possibl… | ||
| 1.3.6.1.4.1.75.19 | NodemoduleNetIfInternalError | An internal error at the net interface has been detected: its state changed to netFault(internal(2)). | ||
| 1.3.6.1.4.1.75.20 | NodemoduleNetIfExternalError | An external error at the net interface has been detected: its state changed to either netFault(auiBad(3)) or netFault(mdiBad(4)). | ||
| 1.3.6.1.4.1.75.21 | NodemoduleParityError | An intelligent module has detected a parity error: its status has changed to a1imModuleFault (parityErr(3)). | ||
| 1.3.6.1.4.1.75.22 | NodemoduleFanBad | The fan on the module is defective: its status has changed to ecFanStatus(abnormal(3)). | ||
| 1.3.6.1.4.1.75.23 | NodebeaconDetected | The ring containing this card has begun the beacon detect process: its status has changed to tr16cOperState(beaconDetectInProgress(4)). | ||
| 1.3.6.1.4.1.75.24 | NodemoduleTemperatureNormal | The card's temperature has returned to normal: its state changed from a1gTempStatus(abnormal(2)) to a1gTempStatus(normal(3)). | ||
| 1.3.6.1.4.1.75.32 | NodeportUnlocked | One or more of the concentrator's ports have been unlocked. | ||
| 1.3.6.1.4.1.75.33 | NodeportLocked | One or more of the concentrator's ports have been locked. | ||
| 1.3.6.1.4.1.75.34 | NodeportAutoSegmented | One or more of the concentrator's ports have been auto-segmented by the hardware because of a fault. | ||
| 1.3.6.1.4.1.75.35 | NodeportFault | One or more of the concentrator's ports have been segmented by the supervisor because of a fault. | ||
| 1.3.6.1.4.1.75.36 | NodeportForced | One or more of the concentrator's ports have been forced to allow passive devices to enter the ring. | ||
| 1.3.6.1.4.1.75.37 | NodeportNotForced | One or more of the concentrator's ports are no longer being forced to allow passive devices to enter the ring. | ||
| 1.3.6.1.4.1.75.38 | NodeportLobeFault | One or more of the concentrator's ports are experiencing a lobe fault. The concentrator experiences voltage(either positive or negative) in only one of the pha… | ||
| 1.3.6.1.4.1.75.39 | NodeportLobeFaultCleared | One or more of the concentrator's ports are no longer experiencing a lobe fault. | ||
| 1.3.6.1.4.1.75.40 | NodeportLinkTestUnlocked | The link test on one or more of the concentrator's ports has been unlocked. | ||
| 1.3.6.1.4.1.75.41 | NodeportLinkTestLocked | The link test on one or more of the concentrator's ports has been locked. | ||
| 1.3.6.1.4.1.75.48 | NodebadPowerSupply | At least one power module has lost its AC power. : its state changed to hubPowerSupplyStatus(acPowerAbnormal(3)). | ||
| 1.3.6.1.4.1.75.49 | NodepowerSupplyHiTemp | The temperature of the power supply has become too high: its state changed to hubPowerSupplyStatus(highTemp(4)). | ||
| 1.3.6.1.4.1.75.50 | NodenetworkIfError | One or more of the interfaces to the network backbone are experiencing faults: its state changed to ensupDynamicNetStatus(netOrSupLoopback(6)). | ||
| 1.3.6.1.4.1.75.51 | NodenetworkIfOK | The interface to the backbone network has changed (recovered) by using a redundant connection. The state of the interface to the backbone network changed to on… | ||
| 1.3.6.1.4.1.75.52 | NodetempBad | The temperature in the enclosure has been reported by an enclosure temperature sensor to be out of range(possible enclosure fan failure) or the temperature of … | ||
| 1.3.6.1.4.1.75.53 | NodetempOK | The temperature of all cards in the enclosure is now in the proper range or the enclosure temperature has returned to the proper range: the hub's state changed… | ||
| 1.3.6.1.4.1.75.54 | NodefTPSBad | One or both (for a fault tolerant power supply) dc power supplies have failed. The power supply's state has changed to: hubPowerSupplyStatus(onePsModuleFailed(… | ||
| 1.3.6.1.4.1.75.55 | NodenetUtilThreshold | The network utilization has been exceeded: ensupNetUtilization exceeded ensupNetUtilThreshold. | ||
| 1.3.6.1.4.1.75.56 | NodeenclosureFanBad | The enclosure has an airflow problem (probably a defective fan): the state of hubAFS has changed to abnormal(3). | ||
| 1.3.6.1.4.1.75.64 | NodeservicePortLogin | The interpreter on the netcard has detected a login command on the service port. | ||
| 1.3.6.1.4.1.75.65 | NodeservicePortLogout | The interpreter on the netcard has detected a logout command on the service port. |