UBQS-CFM-MIB
168 objects
Connectivity Fault Management module for managing IEEE 802.1ag
Imported Objects
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress RowStatus TEXTUAL-CONVENTION TruthValue |
| UBQS-LAG-MIB | ubiAggId |
| UBQS-SMI | ubiMgmtv2 |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.7800.100.10 | IdentityubiCFMMIB | Connectivity Fault Management module for managing IEEE 802.1ag | ||
| 1.3.6.1.4.1.7800.100.10.0 | ScalarAn | current | A MEP can detect and report a number of defects, and multiple defects can be present at the same time. These defects are: bDefRDICCM(0) A remote MEP is reporte… | |
| 1.3.6.1.4.1.7800.100.10.0 | NodeubiCFMMIBNotificationPrefix | |||
| 1.3.6.1.4.1.7800.100.10.0.0 | NodeubiCfmNotifications | |||
| 1.3.6.1.4.1.7800.100.10.0.0.1 | NotificationubiCfmRemoteMepStatusChange | current | Remote MEP state(CC state) change Notification | |
| 1.3.6.1.4.1.7800.100.10.0.0.2 | NotificationubiCfmAggPortRemoteMepStatusChange | current | Notification that Remote MEP state(CC state) on port-gruop change | |
| 1.3.6.1.4.1.7800.100.10.0.0.3 | NotificationubiCfmPmFrameDelayEvent | current | To generate notification when ubiCfmMepPmCurrentValue is bigger than ubiCfmMaPmDelayThreshold | |
| 1.3.6.1.4.1.7800.100.10.0.0.4 | NotificationubiCfmPmFrameLossEvent | current | To generate notification when ubiCfmMepPmCurrentValue is bigger than ubiCfmMaPmLossThreshold | |
| 1.3.6.1.4.1.7800.100.10.0.0.5 | NotificationubiCfmMepEtherPingSendResult | current | Indicates the result of the operation: - ok The Loopback Message(s)reply received - fail The Loopback Message(s)reply don't recieved - already active Another L… | |
| 1.3.6.1.4.1.7800.100.10.0.0.6 | NotificationubiCfmMepLinkTraceSendResult | current | A LTR information about LTMs transmitted | |
| 1.3.6.1.4.1.7800.100.10.0.0.7 | NotificationubiCfmCCConfigDefectAlarm | current | The CCM defect about Config error | |
| 1.3.6.1.4.1.7800.100.10.1 | NodeubiCFMMIBObjects | |||
| 1.3.6.1.4.1.7800.100.10.1.1 | NodeubiCfmMd | |||
| 1.3.6.1.4.1.7800.100.10.1.1.1 | TableubiCfmMdTable | not-accessible | current | The Maintenance Domain table. Each row in the table represents a different Maintenance Domain. A Maintenance Domain is described in 802.1ag (3.22) as the netwo… |
| 1.3.6.1.4.1.7800.100.10.1.1.1.1 | RowubiCfmMdEntry | not-accessible | current | The Maintenance Domain table entry. INDEX { ubiBridgeId, ubiCfmMdIndex } |
| 1.3.6.1.4.1.7800.100.10.1.1.1.1.1 | ColumnubiCfmMdIndex | not-accessible | current | The index to the Maintenance Domain table. |
| 1.3.6.1.4.1.7800.100.10.1.1.1.1.2 | ColumnubiCfmMdName | read-create | current | The Maintenance Domain name. Each Maintenance Domain has unique name amongst all those used or available to a service provider or operator. It facilitates easy… |
| 1.3.6.1.4.1.7800.100.10.1.1.1.1.3 | ColumnubiCfmMdNameType | read-create | current | The type (and thereby format) of the Maintenance Domain Name. There are two types. IEEE802.1ag type(string, address...etc) and ITU-T Y.1731 type (itu-t) |
| 1.3.6.1.4.1.7800.100.10.1.1.1.1.4 | ColumnubiCfmMdLevel | read-create | current | The Maintenance Domain Level. (0 ~ 7 level) |
| 1.3.6.1.4.1.7800.100.10.1.1.1.1.5 | ColumnubiCfmMdMipCreation | read-create | current | Enumerated value indicating whether the management entity can create MHFs (MIP Half Function) for this Maintenance Domain. Since, in this variable, there is no… |
| 1.3.6.1.4.1.7800.100.10.1.1.1.1.6 | ColumnubiCfmMdRowStatus | read-create | current | The status of the row. |
| 1.3.6.1.4.1.7800.100.10.1.1.2 | TableubiCfmDefaultMdTable | not-accessible | current | For each bridge component, the Default MD Level Managed Object controls MHF creation for VIDs that are not attached to a specific Maintenance Association Manag… |
| 1.3.6.1.4.1.7800.100.10.1.1.2.1 | RowubiCfmDefaultMdEntry | not-accessible | current | The Default MD Level table entry. |
| 1.3.6.1.4.1.7800.100.10.1.1.2.1.1 | ColumnubiCfmDefaultMdVlanId | not-accessible | current | The Primary VID of the VLAN to which this entry's objects apply. |
| 1.3.6.1.4.1.7800.100.10.1.1.2.1.2 | ColumnubiCfmDefaultMdLevel | read-create | current | A value indicating the MD Level at which MHFs are to be created, and Sender ID TLV transmission by those MHFs is to be controlled, for the VLAN to which this e… |
| 1.3.6.1.4.1.7800.100.10.1.1.2.1.3 | ColumnubiCfmDefaultMdMipCreation | read-create | current | A value indicating if the Management entity can create MHFs (MIP Half Function) for this VID at this MD Level. If this object has the value defMHFdefer, MHF cr… |
| 1.3.6.1.4.1.7800.100.10.1.1.2.1.4 | ColumnubiCfmDefaultMdRowStatus | read-create | current | The status of the row. |
| 1.3.6.1.4.1.7800.100.10.1.2 | NodeubiCfmMa | |||
| 1.3.6.1.4.1.7800.100.10.1.2.1 | TableubiCfmMaTable | not-accessible | current | The Maintenance Association table. Each row in the table represents an MA. An MA is a set of MEPs, each configured with a single service instance. |
| 1.3.6.1.4.1.7800.100.10.1.2.1.1 | RowubiCfmMaEntry | not-accessible | current | The MA table entry. |
| 1.3.6.1.4.1.7800.100.10.1.2.1.1.1 | ColumnubiCfmMaIndex | not-accessible | current | The index to the Maintenance Association table. |
| 1.3.6.1.4.1.7800.100.10.1.2.1.1.2 | ColumnubiCfmMaName | read-create | current | The Short Maintenance Association name. This name MUST be unique within a maintenance domain. |
| 1.3.6.1.4.1.7800.100.10.1.2.1.1.3 | ColumnubiCfmMaNameType | read-create | current | The type (and thereby format) of the Maintenance Association Name. |
| 1.3.6.1.4.1.7800.100.10.1.2.1.1.4 | ColumnubiCfmMaVlanId | read-create | current | The Primary VLAN ID with which the Maintenance Association is associated, or 0 if the MA is not attached to any VID. |
| 1.3.6.1.4.1.7800.100.10.1.2.1.1.5 | ColumnubiCfmMaMipCreation | read-create | current | Indicates if the Management entity can create MHFs (MIP Half Function) for this MA. |
| 1.3.6.1.4.1.7800.100.10.1.2.1.1.6 | ColumnubiCfmMaRowStatus | read-create | current | The status of the row. |
| 1.3.6.1.4.1.7800.100.10.1.2.2 | TableubiCfmMaAttrTable | not-accessible | current | An Attribute table for each MA(Maintenance Association). Such as, CCM transmission interval. |
| 1.3.6.1.4.1.7800.100.10.1.2.2.1 | RowubiCfmMaAttrEntry | not-accessible | current | An attribute entry |
| 1.3.6.1.4.1.7800.100.10.1.2.2.1.1 | ColumnubiCfmMaAttrCCInterval | read-write | current | Interval between CCM transmissions to be used by all MEPs in the MA. interval3ms(1) CCMs are sent every 3 1/3 milliseconds. interval10ms(2) CCMs are sent every… |
| 1.3.6.1.4.1.7800.100.10.1.2.3 | TableubiCfmMaPmTable | not-accessible | current | An attribute for Performance Monitoring |
| 1.3.6.1.4.1.7800.100.10.1.2.3.1 | RowubiCfmMaPmEntry | not-accessible | current | Performance Monitoring Entry |
| 1.3.6.1.4.1.7800.100.10.1.2.3.1.1 | ColumnubiCfmMaPmDelayInterval | read-write | current | Interval to trasmit DM(delay measurement)message |
| 1.3.6.1.4.1.7800.100.10.1.2.3.1.2 | ColumnubiCfmMaPmLossInterval | read-write | current | Interval to trasmit LM(loss measurement)message |
| 1.3.6.1.4.1.7800.100.10.1.2.3.1.3 | ColumnubiCfmMaPmDelayThreshold | read-write | current | Treshold to limit for delay |
| 1.3.6.1.4.1.7800.100.10.1.2.3.1.4 | ColumnubiCfmMaPmLossThreshold | read-write | current | Treshold to limit for loss |
| 1.3.6.1.4.1.7800.100.10.1.3 | NodeubiCfmRmep | |||
| 1.3.6.1.4.1.7800.100.10.1.3.1 | TableubiCfmRmepTable | not-accessible | current | Information of Remote Mep table |
| 1.3.6.1.4.1.7800.100.10.1.3.1.1 | RowubiCfmRmepEntry | not-accessible | current | Information of Remote Mep entry |
| 1.3.6.1.4.1.7800.100.10.1.3.1.1.1 | ColumnubiCfmRmepId | not-accessible | current | Maintenance association End Point Identifier of a remote MEP |
| 1.3.6.1.4.1.7800.100.10.1.3.1.1.2 | ColumnubiCfmRmepVlanId | read-write | current | VLAN Identifier of a remote MEP. Same value of local MEP(MA's VID) |
| 1.3.6.1.4.1.7800.100.10.1.3.1.1.3 | ColumnubiCfmRmepRemoteMacAddr | read-write | current | The MAC address of the remote MEP. |
| 1.3.6.1.4.1.7800.100.10.1.3.1.1.4 | ColumnubiCfmRmepCrossCheckType | read-write | current | CrossCheck Type (uicast or multicast). |
| 1.3.6.1.4.1.7800.100.10.1.3.1.1.5 | ColumnubiCfmRmepStatus | read-only | current | Continuity Status to local MEP from remote MEP. Remote MEP state machine last entered either the RMEP_FAILED or RMEP_OK state |
| 1.3.6.1.4.1.7800.100.10.1.3.1.1.6 | ColumnubiCfmRmepRowStatus | read-create | current | The status of the row. |
| 1.3.6.1.4.1.7800.100.10.1.4 | NodeubiCfmMep | |||
| 1.3.6.1.4.1.7800.100.10.1.4.1 | TableubiCfmMepTable | not-accessible | current | The Maintenance Association End Point (MEP) table. |
| 1.3.6.1.4.1.7800.100.10.1.4.1.1 | RowubiCfmMepEntry | not-accessible | current | The known MEPS table entry. |
| 1.3.6.1.4.1.7800.100.10.1.4.1.1.1 | ColumnubiCfmMepId | not-accessible | current | Integer that is unique among all the MEPs in the same MA. Other definition is: A small integer, unique over a given Maintenance Association, identifying a spec… |
| 1.3.6.1.4.1.7800.100.10.1.4.1.1.2 | ColumnubiCfmMepMdLevel | read-write | current | MD level that belong to this MD |
| 1.3.6.1.4.1.7800.100.10.1.4.1.1.3 | ColumnubiCfmMepVlanId | read-write | current | An integer indicating the Primary VID of the MEP, always one of the VIDs assigned to the MEP's MA. The value 0 indicates that either the Primary VID is that of… |
| 1.3.6.1.4.1.7800.100.10.1.4.1.1.4 | ColumnubiCfmMepActive | read-write | current | Administrative state of the MEP. A Boolean indicating the administrative state of the MEP. True indicates that the MEP is to function normally, and false that … |
| 1.3.6.1.4.1.7800.100.10.1.4.1.1.5 | ColumnubiCfmMepDirection | read-write | current | The direction in which the MEP faces on the Bridge port. |
| 1.3.6.1.4.1.7800.100.10.1.4.1.1.6 | ColumnubiCfmMepMdName | read-write | current | MD name that belong to this MD |
| 1.3.6.1.4.1.7800.100.10.1.4.1.1.7 | ColumnubiCfmMepUniMep | read-write | current | The flag to configure UNI-MEP |
| 1.3.6.1.4.1.7800.100.10.1.4.1.1.8 | ColumnubiCfmMepRmepId | read-write | current | The specified RmepID that is RMEP configured |
| 1.3.6.1.4.1.7800.100.10.1.4.1.1.9 | ColumnubiCfmMepIfname | read-only | current | This object is the IfIndex of the interface where MEP configure. |
| 1.3.6.1.4.1.7800.100.10.1.4.1.1.10 | ColumnubiCfmMepIfMacAddr | read-only | current | Thsi object is the MAC address of the interface where MEP configure. |
| 1.3.6.1.4.1.7800.100.10.1.4.1.1.11 | ColumnubiCfmMepRdi | read-only | current | State of the RDI bit in the sending CCM (true for RDI=1), or false. |
| 1.3.6.1.4.1.7800.100.10.1.4.1.1.12 | ColumnubiCfmMepCCType | read-write | current | The type of CCM message. |
| 1.3.6.1.4.1.7800.100.10.1.4.1.1.13 | ColumnubiCfmMepCCEnable | read-write | current | If set to true, the MEP will generate CCM messages. |
| 1.3.6.1.4.1.7800.100.10.1.4.1.1.14 | ColumnubiCfmMepRowStatus | read-create | current | The status of the row. |
| 1.3.6.1.4.1.7800.100.10.1.4.1.1.15 | ColumnubiCfmMepMissingTime | read-only | current | The pass time after received last CCM |
| 1.3.6.1.4.1.7800.100.10.1.4.1.1.16 | ColumnubiCfmMepExpiredTime | read-only | current | The remain time till Expired RMEP status |
| 1.3.6.1.4.1.7800.100.10.1.4.1.1.17 | ColumnubiCfmMepForceEgressTag | read-write | current | UNI-MEP send CCM with VID information(tagged) or send CCM without VID information (untagged). If set none-value, tag information is depend on egress interface … |
| 1.3.6.1.4.1.7800.100.10.1.4.2 | TableubiCfmMepPmDelayTable | not-accessible | current | Performance Monitoring Table |
| 1.3.6.1.4.1.7800.100.10.1.4.2.1 | RowubiCfmMepPmDelayEntry | not-accessible | current | Performance Monitoring Entry |
| 1.3.6.1.4.1.7800.100.10.1.4.2.1.1 | ColumnubiCfmMepPmDelayRmep | read-create | current | Remote MEP ID to measure performance |
| 1.3.6.1.4.1.7800.100.10.1.4.2.1.2 | ColumnubiCfmMepPmDelayFrameType | read-create | current | The type of frame that is to measure |
| 1.3.6.1.4.1.7800.100.10.1.4.2.1.3 | ColumnubiCfmMepPmDelayCurrentValue | read-only | deprecated | Result value of measurement |
| 1.3.6.1.4.1.7800.100.10.1.4.2.1.4 | ColumnubiCfmMepPmDelayTxInterval | read-create | current | Period that operate performance monitoring |
| 1.3.6.1.4.1.7800.100.10.1.4.2.1.5 | ColumnubiCfmMepPmDelayState | read-only | current | Result state of measurement. If ubiCfmMepPmCurrentValue is lower than threshold, ubiCfmMepPmState is OK. If ubiCfmMepPmCurrentValue is over the configured thre… |
| 1.3.6.1.4.1.7800.100.10.1.4.2.1.6 | ColumnubiCfmMepPmDelayRowStatus | read-create | current | The status of the row. |
| 1.3.6.1.4.1.7800.100.10.1.4.2.1.7 | ColumnubiCfmMepPmDelayMin | read-only | current | Minimum delay measured by performance monitoring |
| 1.3.6.1.4.1.7800.100.10.1.4.2.1.8 | ColumnubiCfmMepPmDelayMax | read-only | current | Maximum delay measured by performance monitoring |
| 1.3.6.1.4.1.7800.100.10.1.4.2.1.9 | ColumnubiCfmMepPmDelayAvg | read-only | current | Average of delay measured by performance monitoring |
| 1.3.6.1.4.1.7800.100.10.1.4.3 | TableubiCfmMepPmLossTable | not-accessible | current | Performance Monitoring Table |
| 1.3.6.1.4.1.7800.100.10.1.4.3.1 | RowubiCfmMepPmLossEntry | not-accessible | current | Performance Monitoring Entry |
| 1.3.6.1.4.1.7800.100.10.1.4.3.1.1 | ColumnubiCfmMepPmLossRmep | read-create | current | Remote MEP ID to measure performance |
| 1.3.6.1.4.1.7800.100.10.1.4.3.1.2 | ColumnubiCfmMepPmLossFrameType | read-create | current | The type of frame that is to measure |
| 1.3.6.1.4.1.7800.100.10.1.4.3.1.3 | ColumnubiCfmMepPmLossCurrentValue | read-only | deprecated | Result value of measurement |
| 1.3.6.1.4.1.7800.100.10.1.4.3.1.4 | ColumnubiCfmMepPmLossTxInterval | read-create | current | Period that operate performance monitoring |
| 1.3.6.1.4.1.7800.100.10.1.4.3.1.5 | ColumnubiCfmMepPmLossState | read-only | current | Result state of measurement. If ubiCfmMepPmCurrentValue is lower than threshold, ubiCfmMepPmState is OK. If ubiCfmMepPmCurrentValue is over the configured thre… |
| 1.3.6.1.4.1.7800.100.10.1.4.3.1.6 | ColumnubiCfmMepPmLossRowStatus | read-create | current | The status of the row. |
| 1.3.6.1.4.1.7800.100.10.1.4.3.1.7 | ColumnuniCfmMepPmLossNearEndTot | read-only | current | Frame loss of near end measured by performance monitoring |
| 1.3.6.1.4.1.7800.100.10.1.4.3.1.8 | ColumnuniCfmMepPmLossFarEndTot | read-only | current | Frame loss of far end measured by performance monitoring |
| 1.3.6.1.4.1.7800.100.10.1.4.3.1.9 | ColumnubiCfmMepPmLossRttMin | read-only | current | Minimum route-trip time between MEPs |
| 1.3.6.1.4.1.7800.100.10.1.4.3.1.10 | ColumnubiCfmMepPmLossRttMax | read-only | current | Maximum route-trip time between MEPs |
| 1.3.6.1.4.1.7800.100.10.1.4.3.1.11 | ColumnubiCfmMepPmLossRttAvg | read-only | current | Average of route-trip time between MEPs |
| 1.3.6.1.4.1.7800.100.10.1.4.4 | NodeubiCfmMepOamSend | |||
| 1.3.6.1.4.1.7800.100.10.1.4.4.1 | ScalarubiCfmMepOamSendBridgeId | read-write | current | Bridge ID to send Ping or Linktrace |
| 1.3.6.1.4.1.7800.100.10.1.4.4.2 | ScalarubiCfmMepOamSendMdIndex | read-write | current | Maintenance Domain ID to send Ping or Linktrace |
| 1.3.6.1.4.1.7800.100.10.1.4.4.3 | ScalarubiCfmMepOamSendMaIndex | read-write | current | Maintenance Association ID to send Ping or Linktrace |
| 1.3.6.1.4.1.7800.100.10.1.4.4.4 | ScalarubiCfmMepOamSendMepId | read-write | current | MEP ID to send Ping or Linktrace |
| 1.3.6.1.4.1.7800.100.10.1.4.4.5 | ScalarubiCfmMepOamSendDstMac | read-write | current | Destination MAC address |
| 1.3.6.1.4.1.7800.100.10.1.4.4.6 | ScalarubiCfmMepOamSendLoopbackFrameType | read-write | current | Type of CFM loopback Frame (ETH-LB) |
| 1.3.6.1.4.1.7800.100.10.1.4.4.7 | ScalarubiCfmMepOamSendLoopbackFrameCount | read-write | current | Counter to transmit CFM loopback frame |
| 1.3.6.1.4.1.7800.100.10.1.4.4.8 | ScalarubiCfmMepOamSendExecute | read-write | current | Send ping/linktrace messages |
| 1.3.6.1.4.1.7800.100.10.1.4.5 | NodeubiCfmMepOamResult | |||
| 1.3.6.1.4.1.7800.100.10.1.4.5.1 | ScalarubiCfmMepOamResultEtherPing | accessible-for-notify | current | The result of Loopback message sent. If already Loopback function activate, send trap result value on already_activated. if CC not connected or unicast RMEP cr… |
| 1.3.6.1.4.1.7800.100.10.1.4.5.2 | ScalarubiCfmMepOamResultEtherPingSndCount | accessible-for-notify | current | Counter of CFM loopback frame to send |
| 1.3.6.1.4.1.7800.100.10.1.4.5.3 | ScalarubiCfmMepOamResultEtherPingRcvCount | accessible-for-notify | current | Received counter of CFM lopback reply |
| 1.3.6.1.4.1.7800.100.10.1.4.5.4 | ScalarubiCfmMepOamResultEtherPingRttMin | accessible-for-notify | current | Minimum round-trip time measured by CFM loopback frame |
| 1.3.6.1.4.1.7800.100.10.1.4.5.5 | ScalarubiCfmMepOamResultEtherPingRttMax | accessible-for-notify | current | Maximum round-trip time measured by CFM loopback frame |
| 1.3.6.1.4.1.7800.100.10.1.4.5.6 | ScalarubiCfmMepOamResultEtherPingRttAvg | accessible-for-notify | current | Average of round-trip time measured by CFM loopback frame |
| 1.3.6.1.4.1.7800.100.10.1.4.5.7 | ScalarubiCfmMepOamResultLinkTraceSrcMacAddr | accessible-for-notify | current | MAC address returned in the ingress MAC address field. |
| 1.3.6.1.4.1.7800.100.10.1.4.5.8 | ScalarubiCfmMepOamResultLinkTraceRcvIfIndex | accessible-for-notify | current | The index of local interface of received LTR |
| 1.3.6.1.4.1.7800.100.10.1.4.5.9 | ScalarubiCfmMepOamResultLinkTraceRelayAction | accessible-for-notify | current | Indicates if a LTM was forwarded by the responding MP, as returned in the 'relay-hit' or 'relay-fdb' flag of the flags field. If other LT function already acti… |
| 1.3.6.1.4.1.7800.100.10.1.4.5.10 | ScalarubiCfmMepOamResultLinkTraceHopCount | accessible-for-notify | current | hop count for a returned LTR. |
| 1.3.6.1.4.1.7800.100.10.1.4.6 | TableubiCfmCCConfigDefectTable | not-accessible | current | The CCM config defect table |
| 1.3.6.1.4.1.7800.100.10.1.4.6.1 | RowubiCfmCCConfigDefectEntry | not-accessible | current | The CCM config defect entry |
| 1.3.6.1.4.1.7800.100.10.1.4.6.1.1 | ColumnubiCfmMepCCConfigDefect | read-only | current | Number of Defect 0: None 1: Unexpected MEP ID 2: Unexpected Tx interval 3: Already Existed MEP |
| 1.3.6.1.4.1.7800.100.10.1.4.6.1.2 | ColumnubiCfmMepCCConfigDefectState | read-only | current | State of defect condition 0: DefectConditionExit 1: DefectConditionEntry |
| 1.3.6.1.4.1.7800.100.10.1.5 | NodeubiCfmServerMep | |||
| 1.3.6.1.4.1.7800.100.10.1.5.1 | TableubiCfmServerMepTable | not-accessible | current | A Server MEP represents the compound function of the Server layer termination function and Server/ETH adaptation function which is used to notify the ETH layer… |
| 1.3.6.1.4.1.7800.100.10.1.5.1.1 | RowubiCfmServerMepEntry | not-accessible | current | Server MEP entry |
| 1.3.6.1.4.1.7800.100.10.1.5.1.1.1 | ColumnubiCfmServerMepTxInterval | read-write | current | Periodic Interval of AIS Transmission |
| 1.3.6.1.4.1.7800.100.10.1.5.1.1.2 | ColumnubiCfmServerMepAisLevel | read-write | current | Destinaction Maintenance Domain Level of AIS |
| 1.3.6.1.4.1.7800.100.10.1.5.1.1.3 | ColumnubiCfmServerMepRowStatus | read-create | current | The status of the row. |
| 1.3.6.1.4.1.7800.100.10.1.6 | NodeubiCfmNotificationEnables | |||
| 1.3.6.1.4.1.7800.100.10.1.6.1 | ScalarubiCfmRemoteMepStateChangeEnabled | read-write | current | Remote MEP state(CC state) change Notification |
| 1.3.6.1.4.1.7800.100.10.1.6.2 | ScalarubiCfmPmEventEnabled | read-write | current | ubiCfmMepPmState change Notification |
| 1.3.6.1.4.1.7800.100.10.1.6.3 | ScalarubiCfmCCConfigDefectAlarmEnabled | read-write | current | Detect CCM config Defect notification |
| 1.3.6.1.4.1.7800.100.10.1.7 | NodeubiCfmTrack | |||
| 1.3.6.1.4.1.7800.100.10.1.7.1 | ScalarubiCfmTrackEnable | read-write | current | Not use |
| 1.3.6.1.4.1.7800.100.10.1.7.2 | TableubiCfmTrackTargetTable | not-accessible | current | Not use |
| 1.3.6.1.4.1.7800.100.10.1.7.2.1 | RowubiCfmTrackTargetEntry | not-accessible | current | Not use |
| 1.3.6.1.4.1.7800.100.10.1.7.2.1.1 | ColumnubiCfmTrackTargetSet | read-write | current | Not use |
| 1.3.6.1.4.1.7800.100.10.2 | NodeubiCFMMIBConformance | |||
| 1.3.6.1.4.1.7800.100.10.2.1 | NodeubiCfmMIBCompliances | |||
| 1.3.6.1.4.1.7800.100.10.2.1.1 | ComplianceubiVlanMIBCompliance | current | The compliance statement for VTP implementations. | |
| 1.3.6.1.4.1.7800.100.10.2.2 | NodeubiCfmMIBGroups | |||
| 1.3.6.1.4.1.7800.100.10.2.2.1 | GroupubiCfmMaGroup | current |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Dot1afCfmIndexIntegerNextFree | always contains a legal value (if non-zero) for an index that is not currently used in the relevant table. The Command Generator (Network Management Application) reads this variable and uses the (non-zero) value read when creating a new row with an SNMP SET. When the SET is performed, the Command Responder (agent) MUST determine whether the value is indeed still unused; Two Network Management Applications may attempt to create a row (configuration entry) simultaneously and use the same value. If it is currently unused, the SET succeeds and the Command Responder (agent) changes the value of this object, according to an implementation-specific algorithm. If the value is in use, however, the SET fails. The Network Management Application MUST then re-read this variable to obtain a new usable value. | current | |
| Dot1agCfmAisDefectType | INTEGER { none (0), all (1), loc (2), merge (3), unExpMep (4), unExpMegLvl (5), unExpPeriod (6) } | current | Kind of defect. It is reason why alram cuase. |
| Dot1agCfmCcmInterval | INTEGER { intervalInvalid (0), interval300Hz (1), interval10ms (2), interval100ms (3), interval1s (4), interval10s (5), interval1min (6), interval10min (7) } | current | Indicates the interval at which CCMs are sent by a MEP. The possible values are: intervalInvalid(0) No CCMs are sent (disabled). interval300Hz(1) CCMs are sent every 3 1/3 milliseconds (300Hz). interval10ms(2) CCMs are … |
| Dot1agCfmConfigErrors | BITS { cfmLeak(0), conflictingVids(1), excessiveLevels(2), overlappedLevels(3) } | current | While making the MIP creation evaluation described in 802.1ag clause 22.2.3, the management entity can encounter errors in the configuration. These are possible errors that can be encountered: CFMleak(0) MA x is associa… |
| Dot1agCfmEgressActionFieldValue | INTEGER { egrNoTlv (0), egrOK (1), egrDown (2), egrBlocked (3), egrVid (4) } Dot1agCfmRemoteMepState::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Operational state of the remote MEP state machine. This state machine monitors the reception of valid CCMs from a remote MEP with a specific MEPID. It uses a timer that expires in 3.5 times the length of time indicated by the dot1agCfmMaNetCcmInterval object. rMepIdle(1) Momentary state during reset. rMepStart(2) The timer has not expired since the state machine was reset, and no valid CCM has yet been received. rMepFailed(3) The timer has expired, both since the state machine was reset, and since a valid CCM was received. rMepOk(4) The timer has not expired since a valid CCM was received. " REFERENCE "802.1ag clauses 12.14.7.6.3:b, 20.22" SYNTAX INTEGER { rMepIdle (1), rMepStart (2), rMepFailed (3), rMepOk (4) } | current | Possible values returned in the egress action field |
| Dot1agCfmFngState | INTEGER { fngReset (1), fngDefect (2), fngReportDefect (3), fngDefectReported (4), fngDefectClearing (5) } | current | Indicates the diferent states of the MEP Fault Notification Generator State Machine. fngReset(1) No defect has been present since the dot1agCfmMepFngResetTime timer expired, or since the state machine was last reset. fn… |
| Dot1agCfmHighestDefectPri | INTEGER { none (0), defRDICCM (1), defMACstatus (2), defRemoteCCM (3), defErrorCCM (4), defXconCCM (5) } | current | An enumerated value, equal to the contents of the variable highestDefect (20.33.9 and Table 20-1), indicating the highest-priority defect that has been present since the MEP Fault Notification Generator State Machine wa… |
| Dot1agCfmIdPermission | INTEGER { sendIdNone (1), sendIdChassis (2), sendIdManage (3), sendIdChassisManage (4), sendIdDefer (5) } | current | Indicates what, if anything, is to be included in the Sender ID TLV transmitted in CCMs, LBMs, LTMs, and LTRs. The valid values are: sendIdNone(1) The Sender ID TLV is not to be sent. sendIdChassis(2) The Chassis ID Len… |
| Dot1agCfmIngressActionFieldValue | INTEGER { ingNoTlv (0), ingOk (1), ingDown (2), ingBlocked (3), ingVid (4) } | current | Possible values returned in the ingress action field. |
| Dot1agCfmInterfaceStatus | INTEGER { isNoInterfaceStatusTLV (0), isUp (1), isDown (2), isTesting (3), isUnknown (4), isDormant (5), isNotPresent (6), isLowerLayerDown (7) } | current | An enumerated value from the Interface Status TLV from the last CCM received from the last MEP. It indicates the status of the Interface within which the MEP transmitting the CCM is configured, or the next lower Interfa… |
| Dot1agCfmLowestAlarmPri | INTEGER { allDef (1), macRemErrXcon (2), remErrXcon (3), errXcon (4), xcon (5), noXcon (6) } | current | An integer value specifying the lowest priority defect that is allowed to generate a Fault Alarm (20.9.5), either: allDef(1) DefRDICCM, DefMACstatus, DefRemoteCCM, DefErrorCCM, and DefXconCCM; macRemErrXcon(2) Only DefM… |
| Dot1agCfmMaintAssocName | OCTET STRING (SIZE(1..256)) | current | Denotes a generic Maintenance Association Name. It is the part of the Maintenance Association Identifier which is unique within the Maintenance Domain Name and is appended to the Maintenance Domain Name to form the Main… |
| Dot1agCfmMaintAssocNameType | INTEGER { primaryVid (1), charString (2), unsignedInt16 (3), rfc2865VpnId (4) } | current | A value that represents a type (and thereby the format) of a Dot1agCfmMaintAssocName. The value can be one of the following: ieeeReserved(0) Reserved for definition by IEEE 802.1 recommend to not use zero unless absolut… |
| Dot1agCfmMaintDomainName | OCTET STRING (SIZE(1..256)) | current | Denotes a generic Maintenance Domain Name. A Dot1agCfmMaintDomainName value is always interpreted within the context of a Dot1agCfmMaintDomainNameType value. Every usage of the Dot1agCfmMaintDomainName textual conventio… |
| Dot1agCfmMaintDomainNameType2 | INTEGER { none (1), dnsLikeName (2), macAddressAndUint (3), charString (4), itu_t (32) } | current | A value that represents a type (and thereby the format) of a Dot1agCfmMaintDomainName. The value can be one of the following: ieeeReserved(0) Reserved for definition by IEEE 802.1 recommend to not use zero unless absolu… |
| Dot1agCfmMDLevel | Integer32 (0..7) | current | Integer identifying the Maintenance Domain Level (MD Level). Higher numbers correspond to higher Maintenance Domains, those with the greatest physical reach, with the highest values for customers' CFM PDUs. Lower number… |
| Dot1agCfmMDLevelOrNone | Integer32 (-1 | 0..7) | current | Integer identifying the Maintenance Domain Level (MD Level). Higher numbers correspond to higher Maintenance Domains, those with the greatest physical reach, with the highest values for customers' CFM packets. Lower num… |
| Dot1agCfmMepDefects | BITS { bDefRDICCM(0), bDefMACstatus(1), bDefRemoteCCM(2), bDefErrorCCM(3), bDefXconCCM(4) } | current | A MEP can detect and report a number of defects, and multiple defects can be present at the same time. These defects are: bDefRDICCM(0) A remote MEP is reported the RDI bit in its last CCM. bDefMACstatus(1) Either some … |
| Dot1agCfmMepId | Unsigned32 (1..8191) | current | Maintenance association End Point Identifier (MEPID): A small integer, unique over a given Maintenance Association, identifying a specific MEP. |
| Dot1agCfmMepIdOrZero | Unsigned32 (0 | 1..8191) | current | Maintenance association End Point Identifier (MEPID): A small integer, unique over a given Maintenance Association, identifying a specific MEP. The special value 0 is allowed to indicate special cases, for example that … |
| Dot1agCfmMhfCreation | INTEGER { defMHFnone (1), defMHFdefault (2), defMHFexplicit (3), defMHFdefer (4) } | current | Indicates if the Management Entity can create MHFs. The valid values are: defMHFnone(1) No MHFs can be created for this VID. defMHFdefault(2) MHFs can be created on this VID on any Bridge port through which this VID can… |
| Dot1agCfmMpDirection | INTEGER { down (1), up (2) } | current | Indicates the direction in which the Maintenance association (MEP or MIP) faces on the bridge port: down(1) Sends Continuity Check Messages away from the MAC Relay Entity. up(2) Sends Continuity Check Messages towards t… |
| Dot1agCfmPbbComponentIdentifier | Unsigned32 (1..4294967295) | current | A Provider Backbone Bridge (PBB) can comprise a number of components, each of which can be managed in a manner essentially equivalent to an 802.1Q bridge. In order to access these components easily, an index is used in … |
| Dot1agCfmPortStatus | INTEGER { psNoPortStateTLV (0), psBlocked (1), psUp (2) } | current | An enumerated value from he Port Status TLV from the last CCM received from the last MEP. It indicates the ability of the Bridge Port on which the transmitting MEP resides to pass ordinary data, regardless of the status… |
| Dot1agCfmRelayActionFieldValue | INTEGER { rlyHit (1), rlyFdb (2), rlyMpdb (3) } | current | Possible values the Relay action field can take. |
| VlanIndex | Integer32 (0..4095) | current | The VLAN-id of a VLAN on ISL or 802.1q trunks. Modification of default parameters is allowed. Implementations are allowed to restrict the range of VLANs. For entities support up to 1024 VLANS. VLANs above 1000 are reser… |